Age | Commit message (Collapse) | Author |
|
We now support the combined layer of Photoshop files (stored as layer 0
in the file). This way users can keep their files as multilayer PSD and
Blender always handle them as flat images.
For perfect alpha this requires an OpenImageIO update:
https://github.com/OpenImageIO/oiio/commit/342cc2633ff590a3bb278481c61ae798c7148361
Photoshop sample files:
https://github.com/OpenImageIO/oiio-images
Brecht has some pending fixes to push for OIIO as well, so we may as
well wait to update our libraries.
What works:
===========
* 8bit images (with or without alpha)
* 16bits images (alpha discarded)
* Photoshop files saved with 'Maximum Compatibility'
* Cycles, Blender internal, BGE (and player)
Known limitations
(due to OIIO dependency):
=========================
* Images with less than 4 channels show a wrong thumbnail (bug may be in OIIO)
* Packed images are not supported
* We do not write PSD files.
Note: old Blenders have support for PSD via Quicktime library. But due
to license issues this was discontinued.
Many thanks for Brecht van Lommel for reviewing the patch, suggesting
multiple improvements and to help solving the alpha issue.
|
|
bli_testextensie.patch - from Lawrence D'Oliveiro (ldo)
|
|
alpha was used for them which doesn't work for cleaned footage stored
in EXR file format.
Perhaps we need to support configurable alpha mode for clips, but
that's for later (maybe even after release),
|
|
|
|
This assumptions are now made:
- Internally float buffers are always linear alpha-premul colors
- Readers should worry about delivering float buffers with that
assumptions.
- There's an input image setting to say whether it's stored with
straight/premul alpha on the disk.
- Byte buffers are now assumed have straight alpha, readers should
deliver straight alpha.
Some implementation details:
- Removed scene's color unpremultiply setting, which was very
much confusing and was wrong for default settings.
Now all renderers assumes to deliver premultiplied alpha.
- IMB_buffer_byte_from_float will now linearize alpha when
converting from buffer.
- Sequencer's effects were changed to assume bytes have got
straight alpha. Most of effects will work with bytes still,
however for glow it was more tricky to avoid data loss, so
there's a commented out glow implementation which converts
byte buffer to floats first, operates on floats and returns
bytes back. It's slower and not sure if it should actually
be used -- who're using glow on alpha anyway?
- Sequencer modifiers should also be working nice with straight
bytes now.
- GLSL preview will predivide float textures to make nice shading,
shading with byte textures worked nice (GLSL was assuming straight
alpha).
- Blender Internal will set alpha=1 to the whole sky. The same
happens in Cycles and there's no way to avoid this -- sky is
neither straight nor premul and doesn't fit color pipeline well.
- Straight alpha mode for render result was also eliminated.
- Conversion to correct alpha need to be done before linearizing
float buffer.
- TIFF will now load and save files with proper alpha mode setting
in file meta data header.
- Remove Use Alpha from texture mapping and replaced with image
datablock setting.
Behaves much more predictable and clear from code point of view
and solves possible regressions when non-premultiplied images were
used as textures with ignoring alpha channel.
|
|
|
|
Use IMB_testiffname to check whether file could be handled by ImBuf or
whether it should be handled by anim routines.
It solves the issue when file without extension is used for movie clip.
|
|
Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
|
|
|
|
|
|
|
|
|
|
else if's
|
|
Not all file formats/calls are supported yet. It will be expended.
Please from now on use BLI_fopen, BLI_* for file manipulations.
For non-windows systems BLI_fopen just calls fopen.
For Windows, the utf-8 string is translated to utf-16 string in order to call UTF version of the function.
|
|
'Unknown fileformat'.
|
|
http://markmail.org/message/fp7ozcywxum3ar7n
|
|
made less cryptic and changed to indicate if they work on files or directories.
|
|
|
|
|
|
|
|
|
|
all image formats should be able to load files bigger then 2gig (when its supported)
|
|
tile cache code in imbuf, but it is not hooked up to the render engine.
Imbuf module: some small refactoring and removing a lot of unused or old code
(about 6.5k lines).
* Added a ImFileType struct with callbacks to make adding an file format type,
or making changes to the API easier.
* Move imbuf init/exit code into IMB_init()/IMB_exit() functions.
* Increased mipmap levels from 10 to 20, you run into this limit already with
a 2k image.
* Removed hamx, amiga, anim5 format support.
* Removed colormap saving, only simple colormap code now for reading tga.
* Removed gen_dynlibtiff.py, editing this is almost as much work as just
editing the code directly.
* Functions removed that were only used for sequencer plugin API:
IMB_anim_nextpic, IMB_clever_double, IMB_antialias, IMB_gamwarp,
IMB_scalefieldImBuf, IMB_scalefastfieldImBuf, IMB_onethird, IMB_halflace,
IMB_dit0, IMB_dit2, IMB_cspace
* Write metadata info into OpenEXR images. Can be viewed with the command
line utility 'exrheader'
For the image tile cache code, see this page:
http://wiki.blender.org/index.php/Dev:2.5/Source/Imaging/ImageTileCache
|
|
|
|
|
|
Now it's a bit more robust, tagging images with profiles when they're loaded,
which then get interpreted later on by conversion functions. Just Linear RGB
and sRGB profiles at the moment, same as before.
This commit fixes Martin's problem with EXRs and Multilayer images loading/
saving too dark, and it also makes the sequence editor work correctly with it too.
Also fixes:
[#19647] gamma correction with color management is reset when resetting Curve
[#19454] 2.5: Dither does not work when Color management is enabled
|
|
|
|
- revert tiff load/save to use standard libtiff (to ensure 100% colorimetry & alpha interpretation across platforms)
- include patch #18720 to fix load of libtiff dynlib (if present on system)
|
|
- replace libtiff by calls to Cocoa services to load/save tiff files
(Libtiff, dynamically linked is not distributed with OS X, and would have had to be shipped for all four architectures)
The imb_cocoaLoadImage & imb_cocoaSaveImage are generic towards the bitmap format, and thus can handle TIFF, GIF, JPG, JP2000, BMP and raw camera formats (read-only for these), even if today only TIFF is used as the other formats are already handled.
- CMake updated
- scons updated (Thx to Jens Verwiebe)
|
|
buffer and set the remaining pixels 0.
|
|
* removed radiosity render code, DNA and RNA (left in radio render pass options), we'll get GI to replace this probably, better allow baking to vertex colors for people who used this.
* removed deprecated solid physics library, sumo integrations and qhull, a dependency
* removed ODE, was no longer being build or supported
* remove BEOS and AMIGA defines and references in Makefiles.
|
|
-r17853:HEAD
|
|
* accidently left priority tests around.
|
|
replacement for mmap/munmap on Windows.
Implemented using CreateFileMapping/MapViewOfFile.
|
|
blocks that were previously missed; and b) greatly increase my
ohloh stats!
|
|
|
|
sprinkle a few 'const char*'s around to remove warnings
about discarding qualifiers in imbuf code.
|
|
It adds read only dds support. (Writing will come later)
Kent
|
|
Please read:
http://www.blender3d.org/cms/Imaging.834.0.html
Or in short:
- adding MultiLayer Image support
- recoded entire Image API
- better integration of movie/sequence Images
Was a whole load of work... went down for a week to do this. So, will need
a lot of testing! Will be in irc all evening.
|
|
standard for film scanning, 10 bits/channel and logarithmic. DPX is
derived from Cineon as the ANSI/SMPTE industry standard.
DPX supports 16 bits color/channel, linear as well as logarithmic.
Code has been gratefully copied from CinePaint and was integrated in
Blender by Joe Eagar.
According to CinePaint's dev Robin Rowe the DPX code defaults to log
colorspace. Can't find in the code clues yet how to enable/disable that.
However, tests with write/read of DPX seems to show no visible loss by
log conversion code. Might be because it uses the entire 16 bit range...
CinePaint dpx files have been succesfully imported in a Quantel IQ HD/2K
finishing/grading set without problem, so for now I guess we can
use it! :)
Changes in code: added tests for image magic numbers before entering
the actual reading code. Prevents error prints, and makes it faster too.
(Note; this because Blender doesn't check for extensions, but calls
reading functions on every file until one accepts it. :)
|
|
Basically the check for a type of jpeg was messed up.
I added a imb_is_a_jpeg function since I was working on that bit and
it makes it a little more similar to the other filetypes.
I also changed a switch statement that had the same loop for all
cases, just moved the loop outside of the switch statement.
Kent
|
|
causing building without OPENEXR to fail. (Hopefully this doesn't mess up
current scons stuff, shouldn't but I haven't tested it after latest
changes in scons)
(I also cleaned up the Makefile a tad so it didn't check twice for WITH_OPENEXR)
Kent
|
|
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
|
|
To enable dynamic tiff support.
I had to fix some of the logic in the fileselect box for icons,
I also expanded the patch to look in various default locations for
a dynamic libtiff.so/libtiff.dll
and look at the env variable BF_TIFF_LIB if it can't find it automatically.
If unable to load the library it prints a message about setting BF_TIFF_LIB
to the console.
I haven't been able to test it on a lot of platforms but hopefully it
will just work ;) I added the files to scons but have not had a chance to
test that as well.
Kent
|
|
This adds Radiance HDR image file support. So now at least we can save
the 'fbuf' (4x32 bits float colors) in Blender.
It doesn't change anything for internal support in imbuf for floa colors,
so when reading .hdr files it still converts it to 32 bits RGBA.
As an extra I've added that saving images with F3 now also adds the
optional extension, when the F10 "Extensions" option is set.
One important note; I don't know the proper license for the code, it was
provided without... will await feedback from Alfredo about it. For now
I've added the standard Blender GPL header.
|
|
source/creator/creator.c
changed ifdef's around fpe_handler to match when its actually used.
intern/SoundSystem/intern/SND_AudioDevice.cpp
Changed: SND_SoundObject* oldobject = oldobject = pIdObject->GetSoundObject();
to: SND_SoundObject* oldobject = pIdObject->GetSoundObject();
intern/SoundSystem/openal/SND_OpenALDevice.cpp
removed unused var.
source/blender/blenkernel/intern/mball.c
initalized a couple of vars that might have been used uninitalized.
The rest were changing types to match, most of them were something like
was short * should have been unsigned short *.
Kent
|
|
removed leftovers from Freeimage/Imagemagick experiments
and removed stuff from a Quicktime for linux implementation.
Also removed the (win32) Fullscreen button from the UI and
disabled the corresponding commandline option. The code is
still present to reenable the option whenever the ATI issues
get solved.
|
|
|
|
did last friday. A patch will be available in the patches tracker
that will have the current stuff there until everything is working.
Kent
|
|
To enable it you will need to download OpenEXR and install it.
For the Makefiles you will need to set WITH_OPENEXR=true
and set NAN_OPENEXR to point to where OpenEXR is installed.
For scons you'll need to remove config.opts to get the new options
so you can enable OpenEXR, I was not able to get blender to link
with scons so the scons stuff may need to be tweaked a little but
I think it should work.
For other platform managers The OpenEXR stuff is similar to QUICKTIME
you need to define WITH_OPENEXR and setup the library stuff and
as you'll notice in this commit there are two extra files.
Kent
|