Age | Commit message (Collapse) | Author |
|
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
|
|
Continuation of 19100aa57d847699d17527b76c2fab1f4ab88885.
|
|
|
|
Instead of submitting tons of tiny IO syscalls, we can speed things up
significantly by `mmap`ing the .blend file into virtual memory and directly
accessing it.
In my local testing, this speeds up loading the Dweebs file with all its
linked files from 19sec to 10sec (on Linux).
As far as I can see, this should be supported on Linux, OSX and BSD.
For Windows, a second code path uses `CreateFileMapping` and
`MapViewOfFile` to achieve the same result.
Reviewed By: mont29, brecht
Differential Revision: https://developer.blender.org/D8246
|
|
This callback made some sense before moving the file-type information
from a bit-flag to an enum: e142ae77cadf04103fbc643f21cf60891862f6a8
Since then, we can compare the type value directly.
Also replace loops over file types with IMB_file_type_from_{ibuf/ftype}.
|
|
Corrects incorrect usage of contraction for 'it is', when possessive 'its' was required.
Differential Revision: https://developer.blender.org/D9250
Reviewed by Campbell Barton
|
|
|
|
This also replaces the Use Alpha setting. We now have these alpha modes:
* Straight: store RGB and alpha channels separately with alpha acting as a
mask, also known as unassociated alpha.
* Premultiplied: transparent RGB pixels are multiplied by the alpha channel.
The natural format for renders.
* Channel Packed: different images are packed in the RGB and alpha channels,
and they should not influence each other. Channel packing is commonly used
by game engines to save memory.
* None: ignore alpha channel from the file and make image fully opaque.
Cycles OSL does not correctly support Channel Packed and None yet, we are
missing fine control over the OpenImageIO texture cache to do that.
Fixes T53672
|
|
The previous behavior here was wrong for some specific combinations of
settings, non-color RGB channels should never be affected by the alpha
channel.
|
|
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
|
|
While \file doesn't need an argument, it can't have another doxy
command after it.
|
|
Move \ingroup onto same line to be more compact and
make it clear the file is in the group.
|
|
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
|
|
|
|
Use BLI_path_extension_* prefix.
|
|
mode (fonts, images...).
Windows-only bug, mmap & co are not threadsafe by default on this platform, so we have to add a dedicated
spinlock for them in win32.
Note that we may try to get rid of those mmap later, but not for 2.76!
To be backported to final 2.76...
|
|
|
|
We _never_ want this, so better not fail silently.
|
|
|
|
Quite safe for 2.72.
|
|
|
|
|
|
We now support the combined layer of Photoshop files (stored as layer 0
in the file). This way users can keep their files as multilayer PSD and
Blender always handle them as flat images.
For perfect alpha this requires an OpenImageIO update:
https://github.com/OpenImageIO/oiio/commit/342cc2633ff590a3bb278481c61ae798c7148361
Photoshop sample files:
https://github.com/OpenImageIO/oiio-images
Brecht has some pending fixes to push for OIIO as well, so we may as
well wait to update our libraries.
What works:
===========
* 8bit images (with or without alpha)
* 16bits images (alpha discarded)
* Photoshop files saved with 'Maximum Compatibility'
* Cycles, Blender internal, BGE (and player)
Known limitations
(due to OIIO dependency):
=========================
* Images with less than 4 channels show a wrong thumbnail (bug may be in OIIO)
* Packed images are not supported
* We do not write PSD files.
Note: old Blenders have support for PSD via Quicktime library. But due
to license issues this was discontinued.
Many thanks for Brecht van Lommel for reviewing the patch, suggesting
multiple improvements and to help solving the alpha issue.
|
|
bli_testextensie.patch - from Lawrence D'Oliveiro (ldo)
|
|
alpha was used for them which doesn't work for cleaned footage stored
in EXR file format.
Perhaps we need to support configurable alpha mode for clips, but
that's for later (maybe even after release),
|
|
|
|
This assumptions are now made:
- Internally float buffers are always linear alpha-premul colors
- Readers should worry about delivering float buffers with that
assumptions.
- There's an input image setting to say whether it's stored with
straight/premul alpha on the disk.
- Byte buffers are now assumed have straight alpha, readers should
deliver straight alpha.
Some implementation details:
- Removed scene's color unpremultiply setting, which was very
much confusing and was wrong for default settings.
Now all renderers assumes to deliver premultiplied alpha.
- IMB_buffer_byte_from_float will now linearize alpha when
converting from buffer.
- Sequencer's effects were changed to assume bytes have got
straight alpha. Most of effects will work with bytes still,
however for glow it was more tricky to avoid data loss, so
there's a commented out glow implementation which converts
byte buffer to floats first, operates on floats and returns
bytes back. It's slower and not sure if it should actually
be used -- who're using glow on alpha anyway?
- Sequencer modifiers should also be working nice with straight
bytes now.
- GLSL preview will predivide float textures to make nice shading,
shading with byte textures worked nice (GLSL was assuming straight
alpha).
- Blender Internal will set alpha=1 to the whole sky. The same
happens in Cycles and there's no way to avoid this -- sky is
neither straight nor premul and doesn't fit color pipeline well.
- Straight alpha mode for render result was also eliminated.
- Conversion to correct alpha need to be done before linearizing
float buffer.
- TIFF will now load and save files with proper alpha mode setting
in file meta data header.
- Remove Use Alpha from texture mapping and replaced with image
datablock setting.
Behaves much more predictable and clear from code point of view
and solves possible regressions when non-premultiplied images were
used as textures with ignoring alpha channel.
|
|
|
|
Use IMB_testiffname to check whether file could be handled by ImBuf or
whether it should be handled by anim routines.
It solves the issue when file without extension is used for movie clip.
|
|
Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
|
|
|
|
|
|
|
|
|
|
else if's
|
|
Not all file formats/calls are supported yet. It will be expended.
Please from now on use BLI_fopen, BLI_* for file manipulations.
For non-windows systems BLI_fopen just calls fopen.
For Windows, the utf-8 string is translated to utf-16 string in order to call UTF version of the function.
|
|
'Unknown fileformat'.
|
|
http://markmail.org/message/fp7ozcywxum3ar7n
|
|
made less cryptic and changed to indicate if they work on files or directories.
|
|
|
|
|
|
|
|
|
|
all image formats should be able to load files bigger then 2gig (when its supported)
|
|
tile cache code in imbuf, but it is not hooked up to the render engine.
Imbuf module: some small refactoring and removing a lot of unused or old code
(about 6.5k lines).
* Added a ImFileType struct with callbacks to make adding an file format type,
or making changes to the API easier.
* Move imbuf init/exit code into IMB_init()/IMB_exit() functions.
* Increased mipmap levels from 10 to 20, you run into this limit already with
a 2k image.
* Removed hamx, amiga, anim5 format support.
* Removed colormap saving, only simple colormap code now for reading tga.
* Removed gen_dynlibtiff.py, editing this is almost as much work as just
editing the code directly.
* Functions removed that were only used for sequencer plugin API:
IMB_anim_nextpic, IMB_clever_double, IMB_antialias, IMB_gamwarp,
IMB_scalefieldImBuf, IMB_scalefastfieldImBuf, IMB_onethird, IMB_halflace,
IMB_dit0, IMB_dit2, IMB_cspace
* Write metadata info into OpenEXR images. Can be viewed with the command
line utility 'exrheader'
For the image tile cache code, see this page:
http://wiki.blender.org/index.php/Dev:2.5/Source/Imaging/ImageTileCache
|
|
|
|
|
|
Now it's a bit more robust, tagging images with profiles when they're loaded,
which then get interpreted later on by conversion functions. Just Linear RGB
and sRGB profiles at the moment, same as before.
This commit fixes Martin's problem with EXRs and Multilayer images loading/
saving too dark, and it also makes the sequence editor work correctly with it too.
Also fixes:
[#19647] gamma correction with color management is reset when resetting Curve
[#19454] 2.5: Dither does not work when Color management is enabled
|