Age | Commit message (Collapse) | Author |
|
|
|
Applying negative offset to seek position before scanning doesnn't have
any effect. This change results in 1.5x faster seeking (random frame,
average value) in sample file with 30 frame GOP length.
If I am not mistaken, B frames can have pts that can be less than
pts of I frame that must be decoded. Even in this case though, B frame
packet will be stored after that I frame.
In addition, preseek value is de facto hardcoded so seeking would fail
if it could. This can be hard to spot though.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D10529
|
|
Removal of 'camera frame' around blend file thumbnail images.
Differential Revision: https://developer.blender.org/D10490
Reviewed by Brecht Van Lommel
|
|
|
|
And fix a (harmless) compiler warning.
|
|
|
|
|
|
Following code from D8627 this patch corrects multi threaded processing
of proxies, where a 60 sec proxy generation drops to 35 sec.
Differential Revision: https://developer.blender.org/D8659
|
|
Allow use all system threads for frame encoding/decoding. This is very
straightforward: the value of zero basically disables threading.
Change threading policy to slice when decoding frames. The reason for
this is because decoding happens frame-by-frame, so inter-frame threading
policy will not bring any speedup.
The change for threading policy to slice is less obvious and is based on
benchmark of the demo files from T78986. This gives best performance so
far.
Rendering the following file went down from 190sec down to 160sec.
https://storage.googleapis.com/institute-storage/vse_simplified_example.zip
This change makes both reading and writing faster. The animation render
is just easiest to get actual time metrics.
Differential Revision: https://developer.blender.org/D8627
|
|
|
|
Add a boundary check, avoiding access past actual data.
Ideally would need to report error to the user somehow,
but it doesn't seem to be easy to do.
This is a minimal safe patch. The proper complete fix is
being worked on by Jesse.
Differential Revision: https://developer.blender.org/D10357
|
|
Ref T84819
Build System
============
This is an API breaking new version, and the updated code only builds with
OpenColorIO 2.0 and later. Adding backwards compatibility was too complicated.
* Tinyxml was replaced with Expat, adding a new dependency.
* Yaml-cpp is now built as a dependency on Unix, as was already done on Windows.
* Removed currently unused LCMS code.
* Pystring remains built as part of OCIO itself, since it has no good build system.
* Linux and macOS check for the OpenColorIO verison, and disable it if too old.
Ref D10270
Processors and Transforms
=========================
CPU processors now need to be created to do CPU processing. These are cached
internally, but the cache lookup is not fast enough to execute per pixel or
texture sample, so for performance these are now also exposed in the C API.
The C API for transforms will no longer be needed afer all changes, so remove
it to simplify the API and fallback implementation.
Ref D10271
Display Transforms
==================
Needs a bit more manual work constructing the transform. LegacyViewingPipeline
could also have been used, but isn't really any simpler and since it's legacy
we better not rely on it.
We moved more logic into the opencolorio module, to simplify the API. There is
no need to wrap a dozen functions just to be able to do this in C rather than C++.
It's also tightly coupled to the GPU shader logic, and so should be in the same
module.
Ref D10271
GPU Display Shader
==================
To avoid baking exposure and gamma into the GLSL shader and requiring slow
recompiles when tweaking, we manually apply them in the shader. This leads
to some logic duplicaton between the CPU and GPU display processor, but it
seems unavoidable.
Caching was also changed. Previously this was done both on the imbuf and
opencolorio module levels. Now it's all done in the opencolorio module by
simply matching color space names. We no longer use cacheIDs from OpenColorIO
since computing them is expensive, and they are unlikely to match now that
more is baked into the shader code.
Shaders can now use multiple 2D textures, 3D textures and uniforms, rather
than a single 3D texture. So allocating and binding those adds some code.
Color space conversions for blending with overlays is now hardcoded in the
shader. This was using harcoded numbers anyway, if this every becomes a
general OpenColorIO transform it can be changed, but for now there is no
point to add code complexity.
Ref D10273
CIE XYZ
=======
We need standard CIE XYZ values for rendering effects like blackbody emission.
The relation to the scene linear role is based on OpenColorIO configuration.
In OpenColorIO 2.0 configs roles can no longer have the same name as color
spaces, which means our XYZ role and colorspace in the configuration give an
error.
Instead use the new standard aces_interchange role, which relates scene linear
to a known scene referred color space. Compatibility with the old XYZ role is
preserved, if the configuration file has no conflicting names.
Also includes a non-functional change to the configuraton file to use an
XYZ-to-ACES matrix instead of REC709-to-ACES, makes debugging a little easier
since the matrix is the same one we have in the code now and that is also
found easily in the ACES specs.
Ref D10274
|
|
This patch will show textures in the image editor with the maximum
available resolution determined by the GPU Hardware/Driver.
Currently the size is limited by the user preference texture size limit.
An image user can set the `IMA_SHOW_MAX_RESOLUTION` flag to request
gpu textures in the max supported resolution. When this flag isn't
set the gpu texture is limited by the user preference setting.
When the gl resolution limit is disabled the GPU texture is always
created for the max supported resolution.
Reviewed By: Clément Foucault
Maniphest Tasks: T81206
Differential Revision: https://developer.blender.org/D9160
|
|
This patch will show textures in the image editor with the maximum
available resolution determined by the GPU Hardware/Driver.
Currently the size is limited by the user preference texture size limit.
An image user can set the `IMA_SHOW_MAX_RESOLUTION` flag to request
gpu textures in the max supported resolution. When this flag isn't
set the gpu texture is limited by the user preference setting.
When the gl resolution limit is disabled the GPU texture is always
created for the max supported resolution.
Reviewed By: Clément Foucault
Maniphest Tasks: T81206
Differential Revision: https://developer.blender.org/D9160
|
|
Replace `long long` with an explicit `int64_t`. This is also what is
used in the FFmpeg headers.
Fixes clang diagnostics warning about wrong format used in the log.
Should be no functional changes.
|
|
|
|
Differential Revision: https://developer.blender.org/D10237
|
|
|
|
For jpeg, an image.resolution was always based on the default 72dpi, now
read the pixel density from the jpeg_decompress_struct, convert
according to unit and store in IMBuf's ppm.
Not 100% sure of all implications tbh., files I have checked seem to work
as expected now in the context of the report.
Maniphest Tasks: T84661
Differential Revision: https://developer.blender.org/D10166
|
|
|
|
Used the wrong define, also remove local defines.
|
|
Match git style email addresses, ignored by the spell checker.
|
|
Comment blocks not conforming to convention.
|
|
Instead of submitting tons of tiny IO syscalls, we can speed things up
significantly by `mmap`ing the .blend file into virtual memory and directly
accessing it.
In my local testing, this speeds up loading the Dweebs file with all its
linked files from 19sec to 10sec (on Linux).
As far as I can see, this should be supported on Linux, OSX and BSD.
For Windows, a second code path uses `CreateFileMapping` and
`MapViewOfFile` to achieve the same result.
Reviewed By: mont29, brecht
Differential Revision: https://developer.blender.org/D8246
|
|
Clamp value to the -HALF_MAX .. HALF_MAX.
The non-clamped values were causing NaN and inf values saved to
the file, which was the root cause of glare node giving unexpected
result.
The nan/inf on overflow is something mentioned in the half data
type in OpenEXR header.
Differential Revision: https://developer.blender.org/D10105
|
|
Without this, additional items could be added in the future
which wouldn't be included in the check.
Move the check out of the loop since this is such an unlikely
situation that checking every iteration isn't needed.
Also remove redundant casts.
|
|
|
|
Handle return value of `fread()` by printing an error and closing the
file when it cannot be read from. Not only is error handing a good idea,
it also prevents GCC from warning that the return value of `fread()`
should not be ignored:
```
.../blender/source/blender/imbuf/intern/indexer.c: In function ‘IMB_indexer_open’:
.../blender/source/blender/imbuf/intern/indexer.c:201:5: warning: ignoring return value of ‘fread’, declared with attribute warn_unused_result [-Wunused-result]
201 | fread(&idx->entries[i].frameno, sizeof(int), 1, fp);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.../blender/source/blender/imbuf/intern/indexer.c:202:5: warning: ignoring return value of ‘fread’, declared with attribute warn_unused_result [-Wunused-result]
202 | fread(&idx->entries[i].seek_pos, sizeof(unsigned long long), 1, fp);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.../blender/source/blender/imbuf/intern/indexer.c:203:5: warning: ignoring return value of ‘fread’, declared with attribute warn_unused_result [-Wunused-result]
203 | fread(&idx->entries[i].seek_pos_dts, sizeof(unsigned long long), 1, fp);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.../blender/source/blender/imbuf/intern/indexer.c:204:5: warning: ignoring return value of ‘fread’, declared with attribute warn_unused_result [-Wunused-result]
204 | fread(&idx->entries[i].pts, sizeof(unsigned long long), 1, fp);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
```
Differential Revision: https://developer.blender.org/D9916
Reviewed by: campbellbarton
|
|
|
|
|
|
This commit resolves problem introduced in e1665c3d3190 - it was
difficult to import media at their original resolution.
This is done by using original resolution as reference for scale.
All crop and strip transform values and their animation is converted
form old files.
To make both workflows easy to use, sequencer tool settings have been
created with preset for preffered scaling method. This setting is in
sequencer timeline header and add image or movie strip operator
properties.
Two new operators have been added:
`sequencer.strip_transform_fit` operator with 3 options: Scale To Fit,
Scale to Fill and Stretch To Fill.
Operator can fail if strip image or video is not loaded currently, this
case should be either sanitized or data loaded on demand.
`sequencer.strip_transform_clear` operator with 4 options:
Clear position, scale, rotation and all (previous 3 options combined).
Reviewed By: sergey, fsiddi
Differential Revision: https://developer.blender.org/D9582
|
|
* Support defining (not necessarily rendering) icons in threads. Needed so the
File Browser can expose file previews with an icon-id to scripts.
** For that, ported `icons.c` to C++, to be able to use scope based mutex locks
(cleaner & safer code). Had to do some cleanups and minor refactoring for
that.
* Added support for ImBuf icons, as a decent way for icons to hold the file
preview buffers.
* Tag previews as "unfinished" while they render in a thread, for the File
Browser to dynamically load previews as they get finished.
* Better handle cases where threaded preview generation is requested, but the
ID type doesn't support it (fallback to single threaded). This is for general
sanity of the code (as in, safety and cleanness)
* Enabled asset notifier for custom preview loading operator, was just disabled
because `NC_ASSET` wasn't defined in master yet.
Part of the first Asset Browser milestone. Check the #asset_browser_milestone_1
project milestone on developer.blender.org.
Differential Revision: https://developer.blender.org/D9719
Reviewed by: Bastien Montagne, Brecht Van Lommel
|
|
Remove DNA headers, using forward declarations where possible.
Also removed duplicate header, header including it's self
and unnecessary inclusion of libc system headers from BKE header.
|
|
|
|
Didn't know this function existed, better to use it then to avoid verbosity.
|
|
Direcly using the C library allocator functions is usually avoided in favor of
our guarded allocator. It's more useful when debugging.
|
|
Casting 0xFFFFFFFF to float does not give NaN as is needed here. Found through
compiler warning which is now fixed.
|
|
Modernize loops by using the `for(type variable : container)` syntax.
Some loops were trivial to fix, whereas others required more attention
to avoid semantic changes. I couldn't address all old-style loops, so
this commit doesn't enable the `modernize-loop-convert` rule.
Although Clang-Tidy's auto-fixer prefers to use `auto` for the loop
variable declaration, I made as many declarations as possible explicit.
To me this increases local readability, as you don't need to fully
understand the container in order to understand the loop variable type.
No functional changes.
|
|
Replace `typedef` with `using` in C++ code.
In the case of `typedef struct SomeName { ... } SomeName;` I removed the
`typedef` altogether, as this is unnecessary in C++. Such cases have been
rewritten to `struct SomeName { ... };`
No functional changes.
|
|
No functional changes.
|
|
No functional changes.
|
|
Fix linker errors by explicitly linking PugiXML when OpenImageIO is
used.
PugiXML has been separated from OpenImageIO (D8628). This means that any
time OpenImageIO libraries are linked, the PugiXML libraries have to be
linked as well. This was set up correctly for Cycles, but not for imbuf.
Because of this, building without Cycles but with OIIO would produce
linker errors.
|
|
|
|
Crash is related to the definition of the GL_MAX_TEXTURE_SIZE. OpenGL does not clearly
defined `GL_MAX_TEXTURE_SIZE` exactly means. Both on AMD and NVIDIA we have issues with
huge textures that they don't get created even if they are smaller. (See {D9530} for
research).
This patch will try to create the texture in a smaller size when the texture creation
failed.
Final implementation by: Clément Foucault
We should create a solution that doesn't need downscaling. For this specific case ARB_sparse_texture might help to create cleaner code, but you still have to commit the whole image what introduces several draw calls. Other improvement is to optimize the scaling; current implementation isn't optimized for performance.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D9524
|
|
|
|
is present
Caused by rB4212b6528afb.
'updateGLSLCurveMapping()' compares cacheIDs and in certain scenarios,
these are the same when they should not.
- whenever we had multiple viewports that are colormanaged with
curvemappings this worked right (cacheIDs were different)
- for example, this also worked right when the ImageEditor displays a
Render Result or a Compositor Viewer
- but it worked wrong when the Image Editor displays any other Image (or
no Image at all)
- it also worked right if there were multiple Image Editors [and one of
them displays a Render Result e.g]
Now why is this so?
For comparison, the curve mapping's pointer/address is used.
- update_glsl_display_processor frees the curve_mapping, see
BKE_curvemapping_free(global_glsl_state.curve_mapping)
- similar, update_glsl_display_processor creates a new curvemapping, see
BKE_curvemapping_copy(view_settings->curve_mapping)
- now for the situation that a viewport with curvemapping and a viewport
without curvemapping is present and you make changes to the curvemapping
the following happens:
-- curve_mapping_settings->cache_id is set once [to the memory address
of curvemapping before change]
-- change happens
-- viewport 1 frees curvemapping
-- viewport 2 duplicates using BKE_curvemapping_copy, but this one gets
the same address like before the change
-- this means we have different data on the same address with the same
cacheID...
Solution: to really make the cache ID unique we can combine the pointer
with its 'changed_timestamp' [which increases on every change].
Reviewers: jbakker
Maniphest Tasks: T82460
Differential Revision: https://developer.blender.org/D9559
|
|
Image format code checked the file type against an enum except for
zero which is used when the format can't be detected.
Also add doc-strings to some of the image file type callbacks.
|
|
|
|
|
|
This callback made some sense before moving the file-type information
from a bit-flag to an enum: e142ae77cadf04103fbc643f21cf60891862f6a8
Since then, we can compare the type value directly.
Also replace loops over file types with IMB_file_type_from_{ibuf/ftype}.
|