| Age | Commit message (Collapse) | Author |
|---|
|
USD requires to be linked with /WHOLEARCHIVE so
the linker won't remove their static initializers.
This strangely has never worked for MSVC since
the flags were set on the LINK_FLAGS property
which is only used to link .dll and .exe files,
given this is a static lib, the flags were not
used, nor did CMake propagate the link directive
to the final targets that did link. Not quite sure
how this has not lead to more problems in the past.
Setting the link directive on the INTERFACE_LINK_OPTIONS
makes cmake do the right thing.
Differential Revision: https://developer.blender.org/D14394
Reviewed by: sybren
|
|
For 3.2 USD will be bumped to a newer version with some
slight API changes, however since we cannot simultaneously
land the libs for all platforms as well as these code changes,
we'll have to support both 21.02 and 21.11+ for at least a
short period of time making the code slightly more messy than
it could have been.
Differential Revision: https://developer.blender.org/D14184
Reviewed by: sybren
|
|
|
|
Fix provided by Piotr Makal in patch D14204.
This patch fixes volume grid duplication which was occurring during
importing USD files. This was caused by calling BKE_volume_grid_add
twice per grid (excluding 'density' grid) for the same Volume
object: (1) in USDVolumeReader::read_object_data and (2) later in
BKE_volume_load.
Differential Revision: https://developer.blender.org/D14204
|
|
This adds a const qualifier to some code path in the Alembic and USD
importers. More could be added elsewhere. This change is done as it will
be required when GeometrySets are supported and helps keeping diff noise
in the patch to a bare minimum.
|
|
Also fixes missing code to read/write/free/copy color management settings
in various places. This can't be set through the UI currently, but still
should be handled consistently.
|
|
The constant M_PI_4 is added to GLSL to ensure it works there too.
Differential Revision: https://developer.blender.org/D14288
|
|
Added call to ensure that the USD plugins are registered
when opening a USD cache archive. This is to avoid USD
load errors due to missing USD file format plugins when
opening blender files that contain USD transform cache
constraints and mesh sequence cache modifilers.
Fixes T94396
|
|
This commit renames enums related the "Curve" object type and ID type
to add `_LEGACY` to the end. The idea is to make our aspirations clearer
in the code and to avoid ambiguities between `CURVE` and `CURVES`.
Ref T95355
To summarize for the record, the plans are:
- In the short/medium term, replace the `Curve` object data type with
`Curves`
- In the longer term (no immediate plans), use a proper data block for
3D text and surfaces.
Differential Revision: https://developer.blender.org/D14114
|
|
|
|
Use using instead of typedef, remove redundant string init,
use "empty", address qualified auto, use nullptr.
|
|
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
|
|
- Order year consistently.
- Minor consistency (case, double-spacing).
- Correct typos.
|
|
Braces missed in b73d3b80fdcb72446
|
|
|
|
Also minor wording improvements.
|
|
Changes to recent addition: c85c52f2ce478ab0e30c5e93fd5a5cb812db232f.
Having both BLI_paths_equal and BLI_path_cmp made it ambiguous
which should be used, as `BLI_paths_equal` wasn't the equivalent to
`BLI_path_cmp(..) == 0` as it is for string equals macro `STREQ(..)`.
It's also a more specialized function which is not used for path
comparison throughout Blender's internal path handling logic.
Instead rename this `BLI_path_cmp_normalized` and return the result of
`BLI_path_cmp` to make it clear paths are modified before comparison.
Also add comments about the conventions for Blender's path comparison
as well as a possible equivalent to Python's `os.path.samefile`
for checking if two paths point to the same location on the file-system.
|
|
Add `USD Preview Surface From Nodes` export option, to convert a
Principled BSDF material node network to an approximate USD Preview
Surface shader representation. If this option is disabled, the original
material export behavior is maintained, where viewport setting are saved
to the Preview Surface shader.
Also added the following options for texture export.
- `Export Textures`: If converting Preview Surface, export textures
referenced by shader nodes to a 'textures' directory which is a
sibling of the USD file.
- `Overwrite Textures`: Allow overwriting existing texture files when
exporting textures (this option is off by default).
- `Relative Texture Paths`: Make texture asset paths relative to the
USD.
The entry point for the new functionality is
`create_usd_preview_surface_material()`, called from
`USDAbstractWriter::ensure_usd_material()`. The material conversion
currently handles a small subset of Blender shading nodes,
`BSDF_DIFFUSE`, `BSDF_PRINCIPLED`, `TEX_IMAGE` and `UVMAP`.
Texture export is handled by copying texture files from their original
location to a `textures` folder in the same directory as the USD.
In-memory and packed textures are saved directly to the textures folder.
This patch is based, in part, on code in Tangent Animation's USD
exporter branch.
Reviewed By: sybren, HooglyBoogly
Differential Revision: https://developer.blender.org/D13647
|
|
This adds vertex creasing support for OpenSubDiv for modeling, rendering,
Alembic and USD I/O.
For modeling, vertex creasing follows the edge creasing implementation with an
operator accessible through the Vertex menu in Edit Mode, and some parameter in
the properties panel. The option in the Subsurf and Multires to use edge
creasing also affects vertex creasing.
The vertex crease data is stored as a CustomData layer, unlike edge creases
which for now are stored in `MEdge`, but will in the future also be moved to
a `CustomData` layer. See comments for details on the difference in behavior
for the `CD_CREASE` layer between egdes and vertices.
For Cycles this adds sockets on the Mesh node to hold data about which vertices
are creased (one socket for the indices, one for the weigths).
Viewport rendering of vertex creasing reuses the same color scheme as for edges
and creased vertices are drawn bigger than uncreased vertices.
For Alembic and USD, vertex crease support follows the edge crease
implementation, they are always read, but only exported if a `Subsurf` modifier
is present on the Mesh.
Reviewed By: brecht, fclem, sergey, sybren, campbellbarton
Differential Revision: https://developer.blender.org/D10145
|
|
As described in T91186, this commit moves mesh vertex normals into a
contiguous array of float vectors in a custom data layer, how face
normals are currently stored.
The main interface is documented in `BKE_mesh.h`. Vertex and face
normals are now calculated on-demand and cached, retrieved with an
"ensure" function. Since the logical state of a mesh is now "has
normals when necessary", they can be retrieved from a `const` mesh.
The goal is to use on-demand calculation for all derived data, but
leave room for eager calculation for performance purposes (modifier
evaluation is threaded, but viewport data generation is not).
**Benefits**
This moves us closer to a SoA approach rather than the current AoS
paradigm. Accessing a contiguous `float3` is much more efficient than
retrieving data from a larger struct. The memory requirements for
accessing only normals or vertex locations are smaller, and at the
cost of more memory usage for just normals, they now don't have to
be converted between float and short, which also simplifies code
In the future, the remaining items can be removed from `MVert`,
leaving only `float3`, which has similar benefits (see T93602).
Removing the combination of derived and original data makes it
conceptually simpler to only calculate normals when necessary.
This is especially important now that we have more opportunities
for temporary meshes in geometry nodes.
**Performance**
In addition to the theoretical future performance improvements by
making `MVert == float3`, I've done some basic performance testing
on this patch directly. The data is fairly rough, but it gives an idea
about where things stand generally.
- Mesh line primitive 4m Verts: 1.16x faster (36 -> 31 ms),
showing that accessing just `MVert` is now more efficient.
- Spring Splash Screen: 1.03-1.06 -> 1.06-1.11 FPS, a very slight
change that at least shows there is no regression.
- Sprite Fright Snail Smoosh: 3.30-3.40 -> 3.42-3.50 FPS, a small
but observable speedup.
- Set Position Node with Scaled Normal: 1.36x faster (53 -> 39 ms),
shows that using normals in geometry nodes is faster.
- Normal Calculation 1.6m Vert Cube: 1.19x faster (25 -> 21 ms),
shows that calculating normals is slightly faster now.
- File Size of 1.6m Vert Cube: 1.03x smaller (214.7 -> 208.4 MB),
Normals are not saved in files, which can help with large meshes.
As for memory usage, it may be slightly more in some cases, but
I didn't observe any difference in the production files I tested.
**Tests**
Some modifiers and cycles test results need to be updated with this
commit, for two reasons:
- The subdivision surface modifier is not responsible for calculating
normals anymore. In master, the modifier creates different normals
than the result of the `Mesh` normal calculation, so this is a bug
fix.
- There are small differences in the results of some modifiers that
use normals because they are not converted to and from `short`
anymore.
**Future improvements**
- Remove `ModifierTypeInfo::dependsOnNormals`. Code in each modifier
already retrieves normals if they are needed anyway.
- Copy normals as part of a better CoW system for attributes.
- Make more areas use lazy instead of eager normal calculation.
- Remove `BKE_mesh_normals_tag_dirty` in more places since that is
now the default state of a new mesh.
- Possibly apply a similar change to derived face corner normals.
Differential Revision: https://developer.blender.org/D12770
|
|
Remove `const` from pass-by-value parameters in function declarations.
The variables passed as parameters can never be modified by the function
anyway, so declaring them as `const` is meaningless. Having the
declaration there could confuse, especially as it suggests it does have
a meaning, training people to write meaningless code.
|
|
Goals of this refactor:
* More unified approach to updating everything that needs to be updated
after a change in a node tree.
* The updates should happen in the correct order and quadratic or worse
algorithms should be avoided.
* Improve detection of changes to the output to avoid tagging the depsgraph
when it's not necessary.
* Move towards a more declarative style of defining nodes by having a
more centralized update procedure.
The refactor consists of two main parts:
* Node tree tagging and update refactor.
* Generally, when changes are done to a node tree, it is tagged dirty
until a global update function is called that updates everything in
the correct order.
* The tagging is more fine-grained compared to before, to allow for more
precise depsgraph update tagging.
* Depsgraph changes.
* The shading specific depsgraph node for node trees as been removed.
* Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only
tagged when the output of the node tree changed (e.g. the Group Output
or Material Output node).
* The copy-on-write relation from node trees to the data block they are
embedded in is now non-flushing. This avoids e.g. triggering a material
update after the shader node tree changed in unrelated ways. Instead
the material has a flushing relation to the new `NTREE_OUTPUT` node now.
* The depsgraph no longer reports data block changes through to cycles
through `Depsgraph.updates` when only the node tree changed in ways
that do not affect the output.
Avoiding unnecessary updates seems to work well for geometry nodes and cycles.
The situation is a bit worse when there are drivers on the node tree, but that
could potentially be improved separately in the future.
Avoiding updates in eevee and the compositor is more tricky, but also less urgent.
* Eevee updates are triggered by calling `DRW_notify_view_update` in
`ED_render_view3d_update` indirectly from `DEG_editors_update`.
* Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`.
This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`.
Removing updates always has the risk of breaking some dependency that no
one was aware of. It's not unlikely that this will happen here as well. Adding
back missing updates should be quite a bit easier than getting rid of
unnecessary updates though.
Differential Revision: https://developer.blender.org/D13246
|
|
Ref T92709
|
|
|
|
|
|
rB218360a89217f4e8321319035bf4d9ff97fb2658 missed a couple renames in USD code paths.
|
|
|
|
|
|
With this commit, curve objects support the geometry nodes modifier.
Curves objects now evaluate to `CurveEval` unless there was a previous
implicit conversion (tessellating modifiers, mesh modifiers, or the
settings in the curve "Geometry" panel). In the new code, curves are
only considered to be the wire edges-- any generated surface is a mesh
instead, stored in the evaluated geometry set.
The consolidation of concepts mentioned above allows remove a lot of
code that had to do with maintaining the `DispList` type temporarily
for modifiers and rendering. Instead, render engines see a separate
object for the mesh from the mesh geometry component, and when the
curve object evaluates to a curve, the `CurveEval` is always used for
drawing wire edges.
However, currently the `DispList` type is still maintained and used as
an intermediate step in implicit mesh conversion. In the future, more
uses of it could be changed to use `CurveEval` and `Mesh` instead.
This is mostly not changed behavior, it is just a formalization of
existing logic after recent fixes for 2.8 versions last year and two
years ago. Also, in the future more functionality can be converted
to nodes, removing cases of implicit conversions. For more discussion
on that topic, see T89676.
The `use_fill_deform` option is removed. It has not worked properly
since 2.62, and the choice for filling a curve before or after
deformation will work much better and be clearer with a node system.
Applying the geometry nodes modifier to generate a curve is not
implemented with this commit, so applying the modifier won't work
at all. This is a separate technical challenge, and should be solved
in a separate step.
Differential Revision: https://developer.blender.org/D11597
|
|
Previously fluid simulation and Alembic modifiers had a dedicated function
to query the velocity for motion blur. Now use a more generic system where
those modifiers output a velocity attribute.
Advantages:
* Geometry and particle nodes can output velocity through the same mechanism,
or read the attribute coming from earlier modifiers.
* The velocity can be preserved through modifiers like subdivision surface or
auto smooth.
* USD and Alembic previously only output velocity from fluid simulation, now
they work with velocity from other sources too.
* Simplifies the code for renderers like Cycles and exporters like
Alembic and USD.
This breaks compatibility:
* External renderers and exporters accessing these velocities through the
Python API now need to use the attribute instead.
* Existing modifier node setups that create an attribute named "velocity"
will render differently with motion blur.
Differential Revision: https://developer.blender.org/D12305
|
|
Removed unused usd_reader_instance.cc and .h files.
|
|
|
|
|
|
|
|
Fixes: `Error: metersPerUnit does not match retrieved type float`
|
|
These were removed globally in 65ec7ec524e667ec95ce947a95f6273088dffee6.
Some files re-introduced these conventions since.
|
|
|
|
Rename function parameter `flags` to `read_flag` in the declaration, to
be consistent with the definition.
No functional changes.
|
|
This is an initial implementation of a USD importer.
This work is comprised of Tangent Animation's open source USD importer,
combined with features @makowalski had implemented.
The design is very similar to the approach taken in the Alembic
importer. The core functionality resides in a collection of "reader"
classes, each of which is responsible for converting an instance of a
USD prim to the corresponding Blender Object representation.
The flow of control for the conversion can be followed in the
`import_startjob()` and `import_endjob()` functions in `usd_capi.cc`.
The `USDStageReader` class is responsible for traversing the USD stage
and instantiating the appropriate readers.
Reviewed By: sybren, HooglyBoogly
Differential Revision: https://developer.blender.org/D10700
|
|
This shows the text as part of the assertion message.
|
|
|
|
As in the old Blender Internal baking code, this still relies on there being a
good mapping to the original vertices.
|
|
This removes a lot of unnecessary code that is generated by
the compiler automatically.
In very few cases, a defaulted destructor in a .cc file is
still necessary, because of forward declarations in the header.
I removed some defaulted virtual destructors, because they are not
necessary, when the parent class has a virtual destructor already.
Defaulted constructors are only necessary when there is another
constructor, but the class should still be default constructible.
Differential Revision: https://developer.blender.org/D10911
|
|
* USD and OpenVDB headers use deprecated TBB headers, suppress all deprecation
warnings there since we have no control over them.
* For our own TBB includes, use the individual headers rather than the tbb.h that
includes everything to avoid warnings, rather than suppressing all.
This is in anticipation of the TBB 2020 upgrade in D10359. Ref D10361.
|
|
|
|
|
|
|
|
|
|
Follow our code style guide by using C-comments for text descriptions.
|
|
Replace nested `namespace blender { namespace io { namespace usd {`
with `namespace blender::io::usd {`.
No functional changes.
|
