| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
Currently B-Bone scaling can only be controlled via their
properties, thus requiring up to 8 drivers per joint between
B-Bones to transfer scaling factors from the handle bone.
A Scale Easing option is added to multiply the easing value
by the Y scale channels to synchronize them - this produces a
natural scaling effect where both the shape of the curve and
the scale is affected.
In addition, four toggles are added for each handle, which
multiply each of the X, Y, Z and Ease values by the matching
Local Scale channel of the handle bone, thus replacing trivial
drivers. The Scale Easing option has no effect on this process
since it's easy to just enable both Length and Ease buttons.
Differential Revision: https://developer.blender.org/D9870
|
|
In addition to the base bone transformation itself, B-Bones have
controls that affect transformation of its segments. For rotation
the features are quite complete, allowing to both reorient the
Bezier handles via properties, and to control them using custom
handle bones. However for scaling there are two deficiencies.
First, there are only X and Y scale factors (actually X and Z),
while lengthwise all segments have the same scaling. The ease
option merely affects the shape of the curve, and does not cause
actual scaling.
Second, scaling can only be controlled via properties, thus
requiring up to 6 drivers per joint between B-Bones to transfer
scaling factors from the handle bone. This is very inefficient.
Finally, the Z channels are confusingly called Y.
This commit adds a B-Bone Y Scale channel and extra B-Bone flag
fields to DNA with appropriate versioning (including for F-Curves
and drivers) in preparation to addressing these limitations.
Functionality is not changed, so the new fields are not used
until the following commits.
Differential Revision: https://developer.blender.org/D9870
|
|
Display the bone axes at the head (root) of the bone by default, instead
of the tail (tip), and add a slider so that it's possible to adjust this
position.
Versioning code is in place to ensure existing files behave the same
(axes shown at tail), whereas new Armatures will be using the new
default (axes shown at head).
Reviewed By: #animation_rigging, #user_interface, Severin, Sybren
Differential Revision: https://developer.blender.org/D7685
|
|
Remove the `BONE_UNKEYED` flag. It was only written (set/cleared) but
never actually read.
Also remove `framechange_poses_clear_unkeyed()` as its only function was
to clear the `BONE_UNKEYED` flag. It wasn't used anywhere either.
The only code that used the flag was the `extract_pose_from_action()`,
which was removed in 2869ce6cfab3aa4ff471bef6e49ac6fe15426247 (2009).
No functional changes.
|
|
|
|
Some DNA headers already did this, most did not. Even though many of them would
be included in C++ files and thus compiled as C++. This would be confusing and
developers may think they have to add `extern "C"` too a whole lot of
(indirect) includes to be able to use a C header in C++.
However, this is a misconception.
`extern "C"` does not cause code to be compiled with C rather than C++! It only
causes the linker to not use C++ function name mangling. See
https://stackoverflow.com/a/1041880.
Because extern DNA headers don't have function declarations, using `extern "C"`
actually should not have any effect. On the other hand, adding it causes no
harm and avoids confusion. So let's just have it consistently in C header
files.
Differential Revision: https://developer.blender.org/D9578
Reviewed by: Bastien Montagne, Sybren Stüvel
|
|
This replaces header include guards with `#pragma once`.
A couple of include guards are not removed yet (e.g. `__RNA_TYPES_H__`),
because they are used in other places.
This patch has been generated by P1561 followed by `make format`.
Differential Revision: https://developer.blender.org/D8466
|
|
Avoids accidents when adding/removing items from an enum.
|
|
|
|
Blender supports locking vertex groups to prevent changes to the
weights. However, as mentioned in comments for D3837, it is hard
to use this because there is no interface for locking in 3D View.
This adds a red shade to bones that are associated with a locked
weight group during weight paint mode, as the first step to adding
such interface. The next step is adding a pie menu for lock/unlock.
Differential Revision: https://developer.blender.org/D6533
|
|
Also remove dead code which checked for SPACE_TIME.
|
|
Implement one more way of inheriting scale from the parent
bone, as an addition to the choices introduced in D5588.
This new mode inherits parent scale as if the parent and child
were not rotated relative to each other, always applying parent
X scale to child X scale and so forth. It is quite natural for
connected bone chains with coherent roll, like limbs or tentacles,
falling roughly between Average and Fix Shear in how closely
the parent scaling is followed.
Currently this can be achieved by using Inherit Scale: None plus
a Copy Scale with Offset from parent on the child; however, this
is cumbersome, and loses the distinction between true local and
inherited scale in the child's Local space.
This new mode also matches how the Before/After Original mix
modes work in the Copy Transforms constraint.
On the technical side this mode requires adding a right side
scale matrix multiplication into the Local<->Pose conversion,
in addition to the existing two left side matrices used for
location and orientation.
Differential Revision: https://developer.blender.org/D6099
|
|
This introduces object mode tagging for data which hasn't yet been
written back to the ID data.
Now when selecting other sculpt objects, the original objects data is
flushed back to the ID before writing a memfile undo step.
|
|
|
|
As an inherent property of matrix-based transformation math, non-
uniform scaling of a parent bone induces shear into the transform
matrix of any rotated child. Such matrices cannot be cleanly
decomposed into a combination of location/rotation/scale, which
causes issues for rigging and animation tools.
Blender bones have options to exclude rotation and/or scale from the
inherited transformation, but don't have any support for removing the
often undesired shear component. That goal requires replacing simple
parenting with a combination of multiple bones and constraints. The
same is true about the goal of inheriting some scale, but completely
avoiding shear.
This patch replaces the old Inherit Scale checkbox with a enum that
supports multiple options:
* Full: inherit all effects of scale, like with enabled Inherit Scale.
* Fix Shear: removes shear from the final inherited transformation.
The cleanup math is specifically designed to preserve the main
axis of the bone, its length and total volume, and minimally
affect roll on average. It however will not prevent reappearance
of shear due to local rotation of the child or its children.
* Average: inherit uniform scale that represents the parent volume.
This is the simplest foolproof solution that will inherit some
scale without ever causing shear.
* None: completely remove scale and shear.
* None (Legacy): old disabled Inherit Scale checkbox.
This mode does not handle parent shear in any way, so the child
is likely to end up having both scale and shear. It is retained
for backward compatibility.
Since many rigging-related addons access the use_inherit_scale
property from Python, it is retained as a backward compatibility
stub that provides the old functionality.
As a side effect of reworking the code, this also fixes a matrix
multiplication order bug in the Inherit Rotation code, which caused
the parent local scale to be applied in world space. In rigger
opinion this option is useless in production rigs, so this fix
should not be a problem.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5588
|
|
This option can not be supported by a new granular dependency graph,
and, especially, copy-on-write.
It was always doing full update ever since initial commit of new dependency
graph which we are using here in the studio for the past years and lack of
this option was never brought up.
Fixes T65557: Delay refresh option in armatures is broken
|
|
not keyframe the mirrored bone
Use an additional pose bone flag so we can keep track of mirrored bones that should be autokeyframed.
Reviewed By: Brecht
Differential Revision: https://developer.blender.org/D5033
|
|
Since drivers on Bone properties are really supposed to be stored
in Armature data and access bones via its bones[] collection, this
lookup path should work efficiently.
Mass lookup of bones by name was already done through hashes,
but they were built temporarily every time that was needed. This
simply replaces it with a common hash table computed immediately
after file load, copy, or Edit to Object mode switch.
|
|
Move pose edit mode booleans out of the armature data into the pose data
Reviewed By: Brecht
Differential Revision: http://developer.blender.org/D4832
|
|
Added working X-mirroring in pose mode with an optional relative mirror
mode.
Reviewed By: Campbell Barton
Differential Revision: http://developer.blender.org/D4765
|
|
|
|
As far as I can tell, there is no technical reason why the B-Bone
segment thickness scaling can't be separated into two axes. The
only downside is the increase in complexity of the B-Bone settings,
but this is inevitable due to the increase in flexibility.
Updating the file is somewhat complicated though, because F-Curves
and drivers have to be duplicated and updated to the new names.
Reviewers: campbellbarton
Subscribers: icappiello, jpbouza
Differential Revision: https://developer.blender.org/D4716
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
|
|
While the flags have been deprecated they're currently unused.
Rename for clarity.
|
|
The none brush doesn't make sense to have anymore with the tool system.
Also remove deprecated flags & types for object, armature & text.
|
|
Avoids mixing these in with regular variables in code-completion.
Use char for pad members except for 'void *', to make size clearer.
Removed/shrink a few redundant padding vars which were >= 8 bytes.
|
|
While \file doesn't need an argument, it can't have another doxy
command after it.
|
|
Most of this code is deprecated for many years already and does not
work at all in Blender 2.8.
Reviewers: brecht, aligorith
Differential Revision: https://developer.blender.org/D4271
|
|
Move \ingroup onto same line to be more compact and
make it clear the file is in the group.
|
|
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
|
|
Without this clang-format may wrap them onto a single line.
|
|
Prevents clang-format wrapping text before comments.
|
|
Needed for clang-format in some cases, see: T53211
|
|
Both original handle types are based on location, and Absolute uses it
in a weird way: the Start handle uses the head, while End uses the tail.
This makes controlling the shape of the B-Bone via control bone rotation
really non-intuitive, especially if trying to add a single control for
the tangent in the middle of a B-Bone chain.
To remedy this, add a new custom handle type that uses the orientation
of the control bone, while completely ignoring location. It is even
possible to control both ends of one B-Bone with the same handle bone,
resulting in an S shape.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D3769
|
|
Custom handle settings actually affect the B-Bone rest shape,
so they should be changed in Edit mode rather than Pose mode.
This is necessary to be able to display the correct rest shape
of the bone in Edit Mode.
Also, instead of flags, introduce an enum to specify the handle
operation modes, so that new ones could be added later.
Differential Revision: https://developer.blender.org/D3588
|
|
|
|
Differential Revision: https://developer.blender.org/D3719
|
|
|
|
|
|
While the feature is interesting, it's not much from what we can tell.
Retargeting is an important feature but needs
to fit in better with typical animation work-flows.
See: T52809
|
|
This fix enables the usage of bbones easing parameters for edit and pose mode seperately. This allows animators to take advantage of the functionality and may eliminate confusion as the parameters now behave similar to other bbone parameters.
Note that splitting the parameters between the modes effectively creates a new parameter set. Blend files of previous versions do not contain this information and will have the values set to 0 on load. As it broke backwards compatibility for pose mode values anyway, I also took the liberty to rename the easing parameters in some places for consistency (which breaks edit mode values).
Reviewers: aligorith
Subscribers: aligorith
Tags: #animation
Differential Revision: https://developer.blender.org/D2796
|
|
This commit/patch/branch brings a bunch of powerful new options for B-Bones and
for working with B-Bones, making it easier for animators to create their own
rigs, using fewer bones (which also means hopefully lighter + faster rigs ;)
This functionality was first demoed by Daniel at BConf15
Some highlights from this patch include:
* You can now directly control the shape of B-Bones using a series of properties
instead of being restricted to trying to indirectly control them through the
neighbouring bones. See the "Bendy Bones" panel...
* B-Bones can be shaped in EditMode to define a "curved rest pose" for the bone.
This is useful for things like eyebrows and mouths/eyelids
* You can now make B-Bones use custom bones as their reference bone handles,
instead of only using the parent/child bones. To do so, enable the
"Use Custom Reference Handles" toggle. If none are specified, then the BBone will
only use the Bendy Bone properties.
* Constraints Head/Tail option can now slide along the B-Bone shape, instead of
just linearly interpolating between the endpoints of the bone.
For more details, see:
* http://aligorith.blogspot.co.nz/2016/05/bendy-bones-dev-update.html
* http://aligorith.blogspot.co.nz/2016/05/an-in-depth-look-at-how-b-bones-work.html
-- Credits --
Original Idea: Daniel M Lara (pepeland)
Original Patch/Research: Jose Molina
Additional Development + Polish: Joshua Leung (aligorith)
Testing/Feedback: Daniel M Lara (pepeland), Juan Pablo Bouza (jpbouza)
|
|
|
|
Also don't use pose-bone transform unless the user is in pose-mode.
|
|
also fully remove freestyle raycasting_algorithm
|
|
|
|
also fix for incorrect flag checking for shape key pin.
|
