Age | Commit message (Collapse) | Author |
|
This enables an extra layer of control in the sculpt brushes.
For now it is enabled only in Scrape, but it should work in all brushes (like normal radius). In the future it may also be enabled in other brushes.
You can tweak in this property in the scrape brush to achieve a much better behavior when working on curve surfaces and control how much volume you want to trim. In most cases, it also fixes the bug where the brush keeps trimming in the same area without disabling accumulate.
It should be possible to fix some other artifacts in other brushes by tweaking this default property.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D5993
|
|
This patch allow to change the brush tip shape between a square and a
circle using a brush property.
After this change we are no longer testing the distance against a cube
(the Z axis is not used). I did not test this in depth, but if it does
not produce any artifacts I think we can keep it this way instead of
adding more complexity to the code.
In this new distance test the brush falloff is only applied on the
rounded parts of the square to avoid sharp artifacts in the
diagonals. Because of this, the round version is much softer than
the square one. The planned hardness property will fix this, but
this can also be avoided by setting the fallof to a custom curve.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6165
|
|
The IK chain was using an anchor point by default as it makes sense for
posing, but for creating curved shapes it is useful to be able to
disable it.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6584
|
|
This brush simulates deforming clay with your fingers, accumulating
material during the stroke. It has a plane that tilts during the stroke
in the front part of the brush to achieve this effect.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6238
|
|
The full name was "Topology Slide/Relax", but it didn't fit in the
toolbar UI. This was causing some problems:
- The mesh filter that does the same thing is called "Relax"
- We may want to add a "Topology Brush" tool in the future that is more
oriented to retopology task (like creating strips of quads), so by doing
this we avoid having two tools with the same name in the UI.
Reviewed By: billreynish
Differential Revision: https://developer.blender.org/D6590
|
|
This commits introduces the pose_ik_segments brush property in the Pose Brush. When increasing the IK segments count, the brush generates more segments and weights associations following the topology of the mesh. When moving the brush, these segments are transformed using an IK solver and they are used to deform the mesh.
When pressing Ctrl, the brush controls the segments' roll rotation instead of using the IK solver. The brush falloff controls how much rotation is propagated from the first to the last segment in the chain.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6389
|
|
Previously the alpha was hardcoded to 0.7. Now it is possible to control
the cursor alpha by changing the alpha color of the cursor color
property. New alpha default is 0.9. This, with the new saturated colors,
should make the cursor more visible on highdpi screens.
I also removed the cache location preview as it is too visible right now
with the new alpha and color values.
Reviewed By: billreynish
Differential Revision: https://developer.blender.org/D6433
|
|
This implements a 5th-order equation smoothstep, which produces a flat
surface at the brush center. Some users find that our current grab brush
is too sharp, so now we have both options.
This also improves the behavior of the new clay brushes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6265
|
|
After adding normal radius, the main use of the Scrape brush is to create flat surfaces with sharp edges. In that case, it does not make sense to have our current "Peaks" version of the brush as its inverted version.
The correct inverted version of Scrape for this use case is the Fill brush. This way you can use this tool to crease both concave and convex sharp edges and to fix the artifacts one version produces with its inverted version.
I think we should merge these two tools into one, but for now, this solution keeps compatibility with the old behavior.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6022
|
|
This commit implements the Topology Slide/Relax brush and the Relax mesh filter.
These tools are designed to move the topology on top of the mesh without affecting the volume.
The Topology Slide/Relax brush slides the topology of the mesh in the direction of the stroke. When pressing shift, it has an alternative smooth mode similar to the Relax Brush in the sculpt branch. It should be way more stable and produce fewer artifacts.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6059
|
|
The smooth iterations of the pose factor were hardcoded to 4. This works fine in most situations when you are posing a low poly mesh, which is the main use case of this tool. I added the smooth iterations as a brush property in case you need to pose a high poly mesh directly without producing artifacts.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6157
|
|
The Multiplane Scrape brush creates sharp edges with a given fixed angle by trimming the mesh with two planes in local space at the same time. When working with stylized or hard surface models, this brush produces way better results and is more predictable than any other crease/flatten brush based on curves and alphas.
It is also the first brush we have than can produce hard surface concave creases.
The Multiplane Scrape Brush also has a dynamic mode where it samples the surface to fit the angle and scrape planes during a stroke. With this mode enabled you can sculpt multiple times over the same edge without creating artifacts.
It can also create creases that change between concave and convex during the same stroke.
The behavior of this brush will improve after merging patches like D5993 and its behavior in concave creases can still be improved, so I will keep tweaking its parameters and default values once we have all brush properties available.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6174
|
|
Dash Ratio and Dash Samples are brush properties to modify the strength of the brush during a stroke. This is useful to create dashed lines in texture paint or stitches in sculpt mode.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D5949
|
|
You may want to disable antialiasing if you are working with pixel art
or low resolution textures. It is enabled by default.
Reviewed By: jbakker, campbellbarton
Differential Revision: https://developer.blender.org/D6044
|
|
direction
This commit also fixes the same issue in elastic deform
Reviewed By: jbakker
Maniphest Tasks: T70554
Differential Revision: https://developer.blender.org/D6014
|
|
With the previous behavior, it was impossible to manipulate areas with a lot of complex shapes like fingers, as the pose origin was calculated only with the topology inside the radius.
With pose offset, the previous method is used to calculate the direction of the "bone", and an extra offset is added on top of it. This way you can set the pose origin in the correct place in this kind of situations. The pose factor grows to fit the new rotation origin.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D5841
|
|
This fixes some artifacts when working on curved surfaces. Previous
behavior was with accumulate on, so that is now the default.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D5826
|
|
This allows to create different effects with some brushes that use the sculpt plane.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D5818
|
|
Added: Airbrush and Chisel
Changed: Marker
Design: @mendio
Subscribers: mendio
Differential Revision: https://developer.blender.org/D5774
|
|
Also renamed "compressibility" to "volume preservation"
Reviewed By: brecht
Maniphest Tasks: T69737
Differential Revision: https://developer.blender.org/D5757
|
|
This option allows to apply a simplify when the stroke is completed. The simplify use the Adaptive option to keep the shape.
|
|
Also use 'use_' prefix for RNA booleans.
|
|
Grab active vertex snaps the maximum strength of the grab brush to the highlighted active vertex, making it easier to manipulate low poly models or meshes with subdivision surfaces.
Dynamic Mesh Preview generates a list of connected vertices from the active vertex and draws them from the cursor code. This helps to visualize the real geometry the user is manipulating from sculpt mode when there are active modifiers.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5646
|
|
This brush lets the user pose a model simulating an armature-like deformation. The pivot point for rotation is calculated automatically based on the radius of the brush and the topology of the model.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5647
|
|
The sculpt automasking feature assigns a factor to each vertex before starting the stroke. This can be used for isolating disconnected meshes, masking cavities, mesh boundary edges or creating topological falloffs.
This commit implements automasking in all brushes and topology automasking without topology falloff.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5645
|
|
This patch implements the paper "Regularized Kelvinlets: Sculpting Brushes based on Fundamental Solutions of Elasticity" https://graphics.pixar.com/library/Kelvinlets/paper.pdf
It includes grab, biscale grab, triscale grab, scale and twist.
All deformation modes are accessible under the same tool. This helps to keep the code organized and it should not make any difference to the user when a better brush management system is implemented.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5634
|
|
This brush is similar to the draw brush but it deforms the mesh from the original coordinates. When used with the sharper curve presets it has a much more pleasant crease/cut behavior than any of the other brushes. This is useful for creating cloth wrinkles, stylized hair or hard surface edges.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5530
|
|
This commit includes the new brush cursor, active vertex updates and the normal radius brush property for all sculpt brushes.
-The new brush cursor previews the real stroke radius over the mesh and the sampled sculpt normal.
-The active vertex is used in sculpt tools and brushes as a starting point for an operation, similar to a preselection. It is also mirrored following the enabled symmetry options to preview the stroke symmetry.
-The normal radius brush property limits the radius that is going to be used to sample the sculpt normal and area center. It controls how closely the cursor follows the surface and it improves the behavior of most brushes, making them suitable for hard surface sculpting.
Reviewed By: campbellbarton, brecht
Differential Revision: https://developer.blender.org/D3594
|
|
New brush option to calculate the distance to generate a new brush step using the cursor position over the mesh instead of the screen coordinates. This avoids artifacts when sculpting across curved surfaces.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5432
|
|
This patch introduces the same presets that are used for proportional editing in the brush falloff menu. The user can select any of these presets or use the regular custom falloff curve. The presets are hardcoded formulas, so the falloff curve is not used when they are active.
This change improves the general feeling of the brushes and it is more convenient and simpler to use. The CUSTOM curve option should now be used in the case that an unusual deformation is needed, in other cases, the hardcoded curve presets should be the default.
The smooth curve presets is a must in the grab brush, as it fixes the deformation issue with the current custom curve setting. The user may try to adjust the deformation by tweaking the curve, but it is nearly impossible to replicate this desired behavior.
{F7636217}
Other brushes that are included in the sculpt branch also rely on this as they need specific hardcoded falloffs to produce the desired effect.
Reviewers: brecht, billreynish
Reviewed By: brecht
Subscribers: JulienKaspar
Differential Revision: https://developer.blender.org/D5367
|
|
In 2.7x UV sculpt was a kind of sub-mode
(a toggle with it's own key-map & drawing code).
Move this to an operator that uses the tool-system,
this simplifies internal logic, especially brush selection
which now matches sculpt and other paint modes.
- Remove toggle used to enable uv sculpt.
- Expose the brush, which was already used but there was no way to
select different brushes.
- Make UV sculpt use paint paint tool slots
(using brushes how all other paint mode currently do).
- Move UV Sculpt keymap to the tools keymap.
- Remove Q to toggle UV sculpt mode,
S/P/G keys to switch tools.
|
|
|
|
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
|
|
This commit adds support for drawing Dots strokes with a gradient factor to get artistic effects like watercolor.
Currently, the option is only supported by Dots materials, and in the future will be added to line strokes, but now there is a limitation on drawing engine and we will keep disabled on Line materials.
Also, added the option to align Dots and Boxes strokes textures aligned with the drawing path to get more fluid strokes.
|
|
This commit groups several options that were tested in grease pencil branch:
- Changes to fill algorithms and improves, specially in small areas and stroke corners.
New options has been added in order to define how the fill is working and internally there are optimizations in detect the small areas in the extremes.
Kudos to @charlie for coding this fill improvements.
- New 3D cursor view plane option.
Now it's possible to lock the drawing plane to the 3D cursor and use the 3D cursor orientation. This allows more flexibility when you are drawing and reduce the need to create geometry to draw over surfaces.
- Canvas Grid now can be locked to 3D cursor.
- New option to reproject stroke using 3D cursor.
- Small tweaks and fixes.
Changes reviewed by @pepeland and @mendio
|
|
While the flags have been deprecated they're currently unused.
Rename for clarity.
|
|
The none brush doesn't make sense to have anymore with the tool system.
Also remove deprecated flags & types for object, armature & text.
|
|
Avoids mixing these in with regular variables in code-completion.
Use char for pad members except for 'void *', to make size clearer.
Removed/shrink a few redundant padding vars which were >= 8 bytes.
|
|
New edit mode operator and post-processing brush option.
Trim works on a single GP stroke. It removes trailing points before and after the first intersection (or loop) nearest to the start of the stroke.
|
|
While \file doesn't need an argument, it can't have another doxy
command after it.
|
|
Move \ingroup onto same line to be more compact and
make it clear the file is in the group.
|
|
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
|
|
Done using:
source/tools/utils_maintenance/c_sort_blocks.py
|
|
This helps to generate cleaner topology and define sharp features for dynamic
topology. Best used on relatively low-poly meshes, it is not needed as much
for high detail areas and has a performance impact.
Differential Revision: https://developer.blender.org/D4189
|
|
Without this clang-format may wrap them onto a single line.
|
|
Prevents clang-format wrapping text before comments.
|
|
Needed for clang-format in some cases, see: T53211
|
|
This adds the functionality requested in T59417 adding a new button near of pressure button of the brush to enable/disable occlude effect for eraser.
|