Age | Commit message (Collapse) | Author |
|
|
|
This patch includes the full shadow functionality for LineArt:
- Light contour and cast shadow lines.
- Lit/shaded region selection.
- Enclosed light/shadow shape calculation.
- Silhouette/anti-silhouette selection.
- Intersection priority based on shadow edge identifier.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D15109
|
|
This patch does code clean ups in `LineartRenderBuffer` because it's
grown kinda big and we need better way to organize those variables inside.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D15172
|
|
This patch adds 4th option to Time offset modifier Modes.
It loops from start frame to end frame and then back to start in reverse direction.
In other words it is a combination of Normal and Reverse mode.
Especially with offset control it adds the ability to create easy looping animations such as cheering crowds, flowers opening and closing at different offsets.
Reviewed By: #grease_pencil, antoniov, pepeland, mendio
Differential Revision: https://developer.blender.org/D14965
|
|
This is for some animation styles that usually copy and paste keyframes and they want avoid that both frames look equal, but they don't want noise randomness changes in the inbetween frames.
The patch adds a new random `Mode` option to select when the noise change.
Reviewed By: pepeland
Maniphest Tasks: T97099
Differential Revision: https://developer.blender.org/D14566
|
|
This patch adds an option to only use every n-th segment of the
envelope result. This can be used to reduce the complexity of the
result.
Differential Revision: http://developer.blender.org/D14503
|
|
Adds fading support for build modifier so it's not a hard cut off
Reviewed By: Antonio Vazquez (antoniov), Matias Mendiola (mendio)
Differential Revision: https://developer.blender.org/D14309
|
|
Cyclic option per segment, allows interesting "loop" visual effects.
Reviewed by: Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D14439
|
|
This patch makes the grease pencil smooth operation symmetric.
It also increases the performance a lot if strong smoothing is
required. Additionally there is an option for the position smooth
operation to keep the shape closer to the original for more iterations.
Since the result differs from the previous algorithm, versioning is used
to change the iterations and factor to match the old result.
Differential Revision: http://developer.blender.org/D14325
|
|
This new modifier creates a shape known as envelope. It connects all
points that are n points apart. There is also a mode which fits a
single stroke to the envelope shape that is determined by that rule.
For more details, refer to the patch.
Reviewed By: NicksBest, antoniov, frogstomp, mendio
Differential Revision: http://developer.blender.org/D14341
|
|
The new mode only builds the new strokes in each frame.
The code is assuming somebody uses "additive" drawing, so that each frame is different only in its NEW strokes. Already existing strokes are skipped.
I used a simple solution: Count the number of strokes in the previous frame and ignore this many strokes in the current frame.
Differential Revision: https://developer.blender.org/D14252
|
|
1. Now handles cyclic strokes correctly.
2. Added a sharp threshold value to allow preservation of sharp corners.
Reviewed By: Antonio Vazquez (antoniov), Aleš Jelovčan (frogstomp)
Ref D14044
|
|
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
|
|
Allows conveniently selecting an inverse of a collection.
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D13846
|
|
This patch adds a randomize factor for the start/end lengths in the Length modifier.
Reviewed By: #grease_pencil, antoniov, pepeland, HooglyBoogly
Differential Revision: https://developer.blender.org/D12928
|
|
his new modifier is equals to the existing mesh modifier but adapted to grease pencil.
The underlying functions used to calculate the shrink are the same used in meshes.
{F11794101}
Reviewed By: pepeland, HooglyBoogly
Differential Revision: https://developer.blender.org/D13192
|
|
Allows line art camera to be different from scene active camera,
useful when baking multiple shots in different angle as
well as for motion graphics effect.
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D12047
|
|
Allows the user to turn off in_front option for grease pencil object
and offset strokes towards camera to allow depth interaction of the
rest of the scene.
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D12046
|
|
|
|
smooth out jaggy lines with a given threshold. For each point in a stroke, the ones with in a given distance of its previous segment will be removed,
thus "zig-zag" artefacts can be cleaned up.
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D12050
|
|
The old modifier had two modes, but it is better to keep separated as meshes.
The UI has changed to be more consistent, including a new column type of modifiers.
Note: The logic has not changed with the previous version of the modifier, just is a split on two modifiers..
Reviewed By: mendio, pablovazquez
Differential Revision: https://developer.blender.org/D12586
|
|
Extend the stroke following an approximated circluar/helical curve.
This can be used as an effect for lineart or on its own as helix generator.
Reviewed By: Sebastian Parborg (zeddb), Hans Goudey (HooglyBoogly), YimingWu (NicksBest), Antonio Vazquez (antoniov), Henrik Dick (weasel)
Differential Revision: https://developer.blender.org/D11668
# 请为您的变更输入提交说明。以 '#' 开始的行将被忽略,而一个空的提交
# 说明将会终止提交。
#
# 位于分支 master
# 您的分支与上游分支 'origin/master' 一致。
#
# 要提交的变更:
# 修改: source/blender/blenkernel/BKE_gpencil_geom.h
# 修改: source/blender/blenkernel/intern/gpencil_geom.cc
# 修改: source/blender/gpencil_modifiers/intern/MOD_gpencillength.c
# 修改: source/blender/makesdna/DNA_gpencil_modifier_defaults.h
# 修改: source/blender/makesdna/DNA_gpencil_modifier_types.h
# 修改: source/blender/makesrna/intern/rna_gpencil_modifier.c
#
|
|
Reason for revert: accidental push of a intermediate change locally.
This reverts commit 25e548c96b3d8c1698fd4385b4dc395665b5a7f6.
|
|
|
|
Create dot-dash effect for grease pencil strokes. User can manually edit the length, gap and styles for each segment of dashed lines.
The values in each segment can all be key-framed to make animations.
Reviewed By: Hans Goudey (HooglyBoogly), Antonio Vazquez (antoniov)
Differential Revision: http://developer.blender.org/D11876
|
|
|
|
Expand camera effective region to a portion beyond image frame so strokes won't end right at the border.
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D12049
|
|
his new modifier allows to generate weights base on:
* Angle of the stroke relative to object or world orientation. For example, if the value is 90, the maximum weights will be for vertical lines and minimum for horizontal lines.
* Distance to Target object. The distance calculated is normalized to get valid weights between 0 and 1.0.
The weights are created in an existing vertex group and the data can be replaced or mixed with the existing value to combine different weight effects. The minimum parameter, allows to define the minimum weight generated. This is useful to avoid very low weights.
The generated weights can be used in any modifier. For example, the angle weight value can be used to mimic FreeStyle Caligraphy modifier using the weight with the thickness modifier.
Also some modifier has been changed to inlude a new option to use the weights as factor of the effect.
As result of this change, the fading option has been removed from Thickness and Opacity modifiers because this can be done using the new modifier, it's not logic to repeat the same.
Reviewed By: mendio, filedescriptor
Differential Revision: https://developer.blender.org/D11604
|
|
Mask value works just like transparency mask.
You are able to select intersection lines inside a
collection or, between collections.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D11309
|
|
This patch adds a function where you can specify occlusion effectiveness from 0 to 255 layers per face for a given mesh material.
Reviewed By: Sebastian Parborg (zeddb)
Ref D11308
|
|
|
|
User can specify filtering options inside line art modifier,
like inverting selection and including face mark region border.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D11307
|
|
This patch includes: Floating edge type support,
Special chaining option for floating edge,
Chaining option for reducing jagged edges when floating
edges are involved.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D11306
|
|
This allows line art to run only once for each modifier stacks,
with an option to toggle a specific line art modifier should
use cache or re-do their own calculations.
Reviewed By: Sebastian Parborg (zeddb), Hans Goudey (HooglyBoogly)
Differential Revision: https://developer.blender.org/D11291
|
|
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D8264
|
|
This patch adds the Randomize options that exist in the Array modifier to the offset modifier.
Currently the patch uses
```
BLI_findindex(&gpf->strokes, gps);
```
to get the index of the current stroke for making each stroke a different seed value. This is how the noise modifier also gets the stroke seed value and it is noted there as well that this method is slow, and should be fixed in the future with another method of getting the stroke index.
Other methods were explored such as using the total number of points of the stroke, but that makes the randomize options incompatible with other modifiers before it such as Multiple Strokes, Array, Build, and Simplify.
{F9591325}
Differential Revision: https://developer.blender.org/D10171
|
|
Thickness modifiers
This patch allows you to dynamically control stroke's opacity and thickness using an object for distance reference in the modifier. Fading range is adjustable, and it is compatible with current curve/vertex group selection.
Reviewed By: #grease_pencil, antoniov, mendio
Maniphest Tasks: T82177, T80194
Differential Revision: https://developer.blender.org/D9091
|
|
After some back and forth with the GP module and some artists, this
option was deemed not that useful. The use case was considered too
obscure so we'll remove it.
It is still posible to have this functionality by using the vertex
weight modiifers or manually clamping the weights.
|
|
This can be done with an other GP modifier already.
|
|
|
|
It caused some chaining errors when used in combination with image space
chaining. After some internal discussion, we realized it is not
useful as chaining in image space essentially does the same thing.
|
|
Clear up what sample length does by renaming the option and variables.
|
|
Also cleanup various other "line" variable names
|
|
This adds the LineArt grease pencil modifier.
It takes objects or collections as input and generates various grease
pencil lines from these objects with the help of the active scene
camera. For example it can generate contour lines, intersection lines
and crease lines to name a few.
This is really useful as artists can then use 3D meshes to automatically
generate grease pencil lines for characters, enviroments or other
visualization purposes.
These lines can then be baked and edited as regular grease pencil lines.
Reviewed By: Sebastian Parborg, Antonio Vazquez, Matias Mendiola
Differential Revision: http://developer.blender.org/D8758
|
|
Approximately 91 spelling corrections, almost all in comments.
Differential Revision: https://developer.blender.org/D10288
Reviewed by Harley Acheson
|
|
This patch adds a noise offset option to the grease pencil noise modifier.
It allows the user to animate the noise along the length of the stroke to create movement that is currently not possible.
It works by adding an offset to the noise table and adding the remaining floating point value to the noise table sampling.
Reviewed By: #grease_pencil
Differential Revision: https://developer.blender.org/D10021
|
|
This patch adds the option to make the random scaling from the grease pencil array modifier uniform.
The current settings allow a separate value for each of the 3 scaling axis. The modifier also creates different seed values for each axis so there is no way to keep the random scaling uniform.
This patch creates 1 random seed value and applies it to each of the scaling axis.
Here is a demonstration of the previous behavior and the new optional behavior.
{F9485973}
{F9485981}
{F9485798}
Reviewed By: #grease_pencil, antoniov, pepeland
Differential Revision: https://developer.blender.org/D9764
|
|
Some DNA headers already did this, most did not. Even though many of them would
be included in C++ files and thus compiled as C++. This would be confusing and
developers may think they have to add `extern "C"` too a whole lot of
(indirect) includes to be able to use a C header in C++.
However, this is a misconception.
`extern "C"` does not cause code to be compiled with C rather than C++! It only
causes the linker to not use C++ function name mangling. See
https://stackoverflow.com/a/1041880.
Because extern DNA headers don't have function declarations, using `extern "C"`
actually should not have any effect. On the other hand, adding it causes no
harm and avoids confusion. So let's just have it consistently in C header
files.
Differential Revision: https://developer.blender.org/D9578
Reviewed by: Bastien Montagne, Sybren Stüvel
|
|
|
|
This commit uses an enum to access expansion for specific panels for
each modifier, constraint, etc. Even though these values are quite simple,
this can help make the code more explicit when the ui_expand_flag is
accessed directly. Also update comments about this bitfield to make
them consistent.
|