| Age | Commit message (Collapse) | Author |
|---|
|
smooth out jaggy lines with a given threshold. For each point in a stroke, the ones with in a given distance of its previous segment will be removed,
thus "zig-zag" artefacts can be cleaned up.
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D12050
|
|
Some of the dna structs were not properly
aligned for 32 bit builds causing issues
for some of the 32 platforms Debian builds
for.
Reviewed By: sergey, brecht
Differential Revision: https://developer.blender.org/D9389
|
|
|
|
This commit moves the storage of `bDeformGroup` and the active index
to `Mesh`, `Lattice`, and `bGPdata` instead of `Object`. Utility
functions are added to allow easy access to the vertex groups given
an object or an ID.
As explained in T88951, the list of vertex group names is currently
stored separately per object, even though vertex group data is stored
on the geometry. This tends to complicate code and cause bugs,
especially as geometry is created procedurally and tied less closely
to an object.
The "Copy Vertex Groups to Linked" operator is removed, since they
are stored on the geometry anyway.
This patch leaves the object-level python API for vertex groups in
place. Creating a geometry-level RNA API can be a separate step;
the changes in this commit are invasive enough as it is.
Note that opening a file saved in 3.0 in an earlier version means
the vertex groups will not be available.
Differential Revision: https://developer.blender.org/D11689
|
|
|
|
|
|
|
|
This allows line art to run only once for each modifier stacks,
with an option to toggle a specific line art modifier should
use cache or re-do their own calculations.
Reviewed By: Sebastian Parborg (zeddb), Hans Goudey (HooglyBoogly)
Differential Revision: https://developer.blender.org/D11291
|
|
This reverts commit f546b0800b9121b24b1292f1ec602ed9964d1848.
|
|
Also modified existing utility functions to take
care of the new surface normal interpolation and so on.
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D11543
|
|
This patch adds an option in the Layers > Relations panel called "Disable Masks in Render".
When checked, no masks on this layer are included in the render.
Example:
| {F10087680} | {F10087681} |
See T88202 for why this is needed.
Reviewed By: antoniov
Maniphest Tasks: T88202
Differential Revision: https://developer.blender.org/D11234
|
|
This is an initial change to speed up the calculation of the Occlude eraser. In the future, we can add more optimizations, but at least this increase speed.
Intead to check always the 3 points, the check is skipped if it's not required.
Base in a solution by Philipp Oeser.
This is related to T88412
|
|
The old value of 5 was not enough for some situations.
|
|
This adds the LineArt grease pencil modifier.
It takes objects or collections as input and generates various grease
pencil lines from these objects with the help of the active scene
camera. For example it can generate contour lines, intersection lines
and crease lines to name a few.
This is really useful as artists can then use 3D meshes to automatically
generate grease pencil lines for characters, enviroments or other
visualization purposes.
These lines can then be baked and edited as regular grease pencil lines.
Reviewed By: Sebastian Parborg, Antonio Vazquez, Matias Mendiola
Differential Revision: http://developer.blender.org/D8758
|
|
Following with the changes included to interpolate strokes of different number of points, a full review has been done in the interpolation tools.
* Interpolate now is a tool and not an operator. It was not logic to have this tool as a button.
* Interpolate tool parameters have been moved to topbar.
* Interpolate popover has been removed from topbar and interpolate `Sequence` operator has been moved to grease pencil menu.
* Interpolate Sequence now include a Redo panel.
* Interpolate tool now allows to select the strokes by pairs. This allows to interpolate any stroke with any stroke and not as before that it was only possible by drawing order. If no stroke is selected, the interpolation is done as before.
* Now is possible interpolate again if a previous keyframe exist. Before, it was impossible to interpolate two times in same frame and this made impossible to do the interpolation by groups of frames.
* New automatic option to `Flip strokes` if the stroke and end are not in the right position. Also the flip can be set manually for corner cases.
* Cleanup of menus related to interpolate.
* Fixed some bugs and removed parameters from scene because now all are tool or operator contained.
* Some code cleanup and function renames.
This commit also includes the some codebase to future implementation of the concept `Vertex Active` that now does not exist in grease pencil.
|
|
|
|
This commit is a refactor of the fill tool to solve several problems we had since the first version of the tool.
Changes:
* The filling speed has been improved for each step of the process with the optimization of each algorithm/function.
* New `AutoFit` option to fill areas outside of the viewport. When enable, the total size of the frame is calculated to fit the filling area.
* New support multiframe filling. Now it is possible to fill multiple similar frames in one go.
* New `Stroke Extension` option to create temporary closing strokes. These strokes can be displayed and adjusted dynamically using wheel mouse or PageUp/Down keys.
* Parameter `Resolution` now is named `Precision` and has been moved to topbar.
* `Resolution` now has decimals and can be lower than 1 to allow quick filling in storyboarding workflows. Maximum value has been set as 5.
* Parameter `Simplify` has been moved to Advanced panel.
* Improved fill outline detection. In some cases, the outline penetrated the area to be filled with unexpected results.
* Fixes some corner case bugs with infinite loops.
As a result of this refactor, also these new functionalities has been added.
* New support for multiframe in `Draw` mode. Any drawing in active frame is duplicated to all selected frame.
* New multiframe display mode. Keyframes before or after of the active frame are displayed using onion colors. This can be disable using Onion overlay options.
|
|
When using grease pencil for drawing Storyboards, it's very common to require a transform of the layers. This transform can be done using the offset modifier, but in some cases, the scene requires a lot of modifiers and makes the file hard to work.
This new feature adds a transforms Location, Rotation and Scale at Layer level, and allows to transform the layer without using a modifier, keeping the scene more clean.
{F9480695}
This feature was suggested by @pepeland after receiving feedback from several artists.
Also, done some code cleanup and rename some functions to get a better naming.
Maniphest Tasks: T83660
Differential Revision: https://developer.blender.org/D9761
|
|
When the multiframe is enabled, playing animation must be disabled or the animation is not visible,
{F9527854}
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D9930
|
|
|
|
Some DNA headers already did this, most did not. Even though many of them would
be included in C++ files and thus compiled as C++. This would be confusing and
developers may think they have to add `extern "C"` too a whole lot of
(indirect) includes to be able to use a C header in C++.
However, this is a misconception.
`extern "C"` does not cause code to be compiled with C rather than C++! It only
causes the linker to not use C++ function name mangling. See
https://stackoverflow.com/a/1041880.
Because extern DNA headers don't have function declarations, using `extern "C"`
actually should not have any effect. On the other hand, adding it causes no
harm and avoids confusion. So let's just have it consistently in C header
files.
Differential Revision: https://developer.blender.org/D9578
Reviewed by: Bastien Montagne, Sybren Stüvel
|
|
Differential Revision: https://developer.blender.org/D8660
This patch is the result of the GSoC 2020 "Editing Grease Pencil Strokes
Using Curves" project. It adds a submode to greasepencil edit mode that
allows for the transformation of greasepencil strokes using bezier
curves. More information about the project can be found
here: https://wiki.blender.org/wiki/User:Filedescriptor/GSoC_2020.
|
|
This replaces header include guards with `#pragma once`.
A couple of include guards are not removed yet (e.g. `__RNA_TYPES_H__`),
because they are used in other places.
This patch has been generated by P1561 followed by `make format`.
Differential Revision: https://developer.blender.org/D8466
|
|
|
|
Now the brushes have several new random settings and use curves to define the effect. The curves have been moved below the parameter to keep UI standards and extra curve panels have been removed.
{F8505387}
The new curves are:
* Hue.
* Saturation.
* Value.
New option to random at stroke level instead to random at point level for the following values:
* Thickness.
* Strength.
* UV.
* Hue.
* Saturation.
* Value.
Curves have been moved below the corresponding parameter and only are displayed in properties panel. Display the curves in the popover made it unusable.
{F8505392}
Also, the Pressure random has been renamed to Radius because the old name was not clear enough.
Reviewed By: mendio, pablovazquez
Differential Revision: https://developer.blender.org/D7577
|
|
This patch adds different kind of shapes/styles for the line extremes while using the annotation line tool.
Current Styles: (following @mendio mockup)
- Arrow (closed arrow)
- Open Arrow
- Segment
- Square
For future it would be great to have icons, it would be more intuitive (and less space) with previews of what each end / start of line does, like the google slides one as reference:
{F8511116}
Reviewed By: #grease_pencil, antoniov, HooglyBoogly
Differential Revision: https://developer.blender.org/D7608
|
|
Avoids accidents when adding/removing items from an enum.
|
|
|
|
|
|
Differential Revision: https://developer.blender.org/D7280
|
|
|
|
|
|
This commit is a full refactor of the grease pencil modules including Draw Engine, Modifiers, VFX, depsgraph update, improvements in operators and conversion of Sculpt and Weight paint tools to real brushes.
Also, a huge code cleanup has been done at all levels.
Thanks to @fclem for his work and yo @pepeland and @mendio for the testing and help in the development.
Differential Revision: https://developer.blender.org/D6293
|
|
|
|
Technically, pointers are to be padded with followup pointer.
|
|
There were two problems:
1) When the buffer was reallocate, the pointer was corrupted.
2) Short variables were too small to hold long lines.
|
|
Proposed fix for T70141.
Before, the ruler was using the name of the layer as key, but this is very weak because if the layer name changes, the layer gets an annotation layer.
Now, the layer is marked using a flag and now it's possible to rename it.
Reviewed By: dfelinto
Differential Revision: https://developer.blender.org/D6028
|
|
|
|
Before, the evaluation of modifers were done in draw manager. The reason of the old design was grease pencil was designed before depsgraph was in place.
This commit moves this logic to depsgraph to follow general design and reduce Draw Manager complexity. Also, this is required in order to use modifiers in Edit modes.
Really, there is nothing really new in the creation of derived data, only the logic has been moved to depsgraph, but the main logic is the same. In order to get a reference to the original stroke and points, a pointer is added to Runtime data as part of the evaluated data. These pointers allow to know and use the original data.
As the modifiers now are evaluated in Depsgraph, the evaluated stroke is usable in Edit modes, so now it's possible to work with the evaluated version instead to use a "ghost" of the final image over the original geometry as work today.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5470
|
|
|
|
|
|
There was a fixed limit to the number of points available in a buffer stroke.
Now, the array is expanded as needed using a predefined number of points for each expansion, instead to add one by one. This is done to reduce the number of times the memory allocation is required.
As part of the fix, some variables have been renamed to reflect better their use.
|
|
|
|
The UI used "Regular" already, but internally the code didn't.
|
|
The name of the field was not clear about the use.
|
|
This new filter allows to select only some type of keyframe (keyframe, breakdown, etc).
This was a request of artists that are used to work with other 2D softwares.
Also some cleanup to remove aninmatable option to some properties.
|
|
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
|
|
This commit adds support for drawing Dots strokes with a gradient factor to get artistic effects like watercolor.
Currently, the option is only supported by Dots materials, and in the future will be added to line strokes, but now there is a limitation on drawing engine and we will keep disabled on Line materials.
Also, added the option to align Dots and Boxes strokes textures aligned with the drawing path to get more fluid strokes.
|
