| Age | Commit message (Collapse) | Author |
|---|
|
* Remove Stars feature. This was a quite minimalistic feature and there are
better alternatives with more control (particles for example).
Removal discussed during BCon13 developer meeting and already years before, time to do it..
Reviewed By: brecht
Differential Revision: http://developer.blender.org/D17
|
|
Instead of having ifdef __GNUC__ all over the headers
to use special compiler's hints use a special file where
all things like this are concentrated.
Makes code easier to follow and allows to manage special
attributes in more efficient way.
Thanks Campbell for review!
|
|
|
|
|
|
DM_debug_print_cdlayers()
|
|
without the underscores these clogged up the namespace for autocompleation which was annoying.
|
|
|
|
|
|
Causing a flurry of refresh file prompts post-commit,
Confusing local diffs and causing merge conflicts,
Stating the obvious; redundant and useless...
We shall not miss thou, blasted expand $keywords$
|
|
documentation done.
|
|
|
|
|
|
Brought back default effect fading: (adding a wipe effect makes it
wipe by default for the length of the strip)
First round in upgrading IPOs from older versions. (works for non-IPO
case now and sets at least the new "default effect fade"-flag)
Still non-working for old IPOs, since Sequence-Strips aren't real IDs!
And: non-frame-lock case should stretch the FCurve to the right length!
|
|
Finally, here is the basic (functional) prototype of the new animation system which will allow for the infamous "everything is animatable", and which also addresses several of the more serious shortcomings of the old system. Unfortunately, this will break old animation files (especially right now, as I haven't written the version patching code yet), however, this is for the future.
Highlights of the new system:
* Scrapped IPO-Curves/IPO/(Action+Constraint-Channels)/Action system, and replaced it with F-Curve/Action.
- F-Curves (animators from other packages will feel at home with this name) replace IPO-Curves.
- The 'new' Actions, act as the containers for F-Curves, so that they can be reused. They are therefore more akin to the old 'IPO' blocks, except they do not have the blocktype restriction, so you can store materials/texture/geometry F-Curves in the same Action as Object transforms, etc.
* F-Curves use RNA-paths for Data Access, hence allowing "every" (where sensible/editable that is) user-accessible setting from RNA to be animated.
* Drivers are no longer mixed with Animation Data, so rigs will not be that easily broken and several dependency problems can be eliminated. (NOTE: drivers haven't been hooked up yet, but the code is in place)
* F-Curve modifier system allows useful 'large-scale' manipulation of F-Curve values, including (I've only included implemented ones here): envelope deform (similar to lattices to allow broad-scale reshaping of curves), curve generator (polynomial or py-expression), cycles (replacing the old cyclic extrapolation modes, giving more control over this). (NOTE: currently this cannot be tested, as there's not access to them, but the code is all in place)
* NLA system with 'tracks' (i.e. layers), and multiple strips per track. (NOTE: NLA system is not yet functional, as it's only partially coded still)
There are more nice things that I will be preparing some nice docs for soon, but for now, check for more details:
http://lists.blender.org/pipermail/bf-taskforce25/2009-January/000260.html
So, what currently works:
* I've implemented two basic operators for the 3D-view only to Insert and Delete Keyframes. These are tempolary ones only that will be replaced in due course with 'proper' code.
* Object Loc/Rot/Scale can be keyframed. Also, the colour of the 'active' material (Note: this should really be for nth material instead, but that doesn't work yet in RNA) can also be keyframed into the same datablock.
* Standard animation refresh (i.e. animation resulting from NLA and Action evaluation) is now done completely separate from drivers before anything else is done after a frame change. Drivers are handled after this in a separate pass, as dictated by depsgraph flags, etc.
Notes:
* Drivers haven't been hooked up yet
* Only objects and data directly linked to objects can be animated.
* Depsgraph will need further tweaks. Currently, I've only made sure that it will update some things in the most basic cases (i.e. frame change).
* Animation Editors are currently broken (in terms of editing stuff). This will be my next target (priority to get Dopesheet working first, then F-Curve editor - i.e. old IPO Editor)
* I've had to put in large chunks of XXX sandboxing for old animation system code all around the place. This will be cleaned up in due course, as some places need special review.
In particular, the particles and sequencer code have far too many manual calls to calculate + flush animation info, which is really bad (this is a 'please explain yourselves' call to Physics coders!).
|
|
Merged 'backend' changes from AnimSys2. Many of these changes are necessary for the Dopesheet and other changes I'm currently still stabilising. Those will come in due course.
|
|
|
|
recommit
|
|
Went through and commented all the code in ipo.c, tidying up formating and coding style in places, and also rearranging to have a more logical order in some places. There shouldn't be any major issues arising from this commit.
|
|
https://svn.blender.org/svnroot/bf-blender/trunk/blender
|
|
Just a bit of tidyup for IPO header-files.
Warning:
Moved IPO Curves + Drivers out of DNA_curve_types.h
|
|
https://svn.blender.org/svnroot/bf-blender/trunk/blender
|
|
* Removed compiler warnings from texteditor work
* Added round brackets around the new defines for IPO channels for extra texture layers
* Tweaked priorities so that BLI_heap_* functions in blenlib can be found by linker (split-sources specific)
TODO:
* "monkey*" vars cannot be found still
|
|
https://svn.blender.org/svnroot/bf-blender/trunk/blender
|
|
the features that are needed to run the game. Compile tested with
scons, make, but not cmake, that seems to have an issue not related
to these changes. The changes include:
* GLSL support in the viewport and game engine, enable in the game
menu in textured draw mode.
* Synced and merged part of the duplicated blender and gameengine/
gameplayer drawing code.
* Further refactoring of game engine drawing code, especially mesh
storage changed a lot.
* Optimizations in game engine armatures to avoid recomputations.
* A python function to get the framerate estimate in game.
* An option take object color into account in materials.
* An option to restrict shadow casters to a lamp's layers.
* Increase from 10 to 18 texture slots for materials, lamps, word.
An extra texture slot shows up once the last slot is used.
* Memory limit for undo, not enabled by default yet because it
needs the .B.blend to be changed.
* Multiple undo for image painting.
* An offset for dupligroups, so not all objects in a group have to
be at the origin.
|
|
https://svn.blender.org/svnroot/bf-blender/trunk/blender
|
|
- For newtonian particles a "self effect" button in particle extras makes the particles be effected by themselves if a particle effector is defined for this system, currently this is a brute force method so things start getting slow with more than ~100 particles, but this will hopefully change in the future.
- Two new effector types: charge and a Lennard-Jones potential based force (inter-molecular forces for example).
-Charge is similar to spherical field except it changes behavior (attract/repulse) based on the effected particles charge field (negative/positive) like real particles with a charge.
-The Lennard-Jones field is a very short range force with a behavior determined by the sizes of the effector and effected particle. At a distance smaller than the combined sizes the field is very repulsive and after that distance it's attractive. It tries to keep the particles at an equilibrium distance from each other. Particles need to be at a close proximity to each other to be effected by this field at all.
- Particle systems can now have two effector fields (two slots in the fields panel). This allows to create particles which for example have both a charge and a Lennard-Jones potential.
|
|
|
|
|
|
blocks that were previously missed; and b) greatly increase my
ohloh stats!
|
|
=========
Merge of the famous particle patch by Janne Karhu, a full rewrite
of the Blender particle system. This includes:
- Emitter, Hair and Reactor particle types.
- Newtonian, Keyed and Boids physics.
- Various particle visualisation and rendering types.
- Vertex group and texture control for various properties.
- Interpolated child particles from parents.
- Hair editing with combing, growing, cutting, .. .
- Explode modifier.
- Harmonic, Magnetic fields, and multiple falloff types.
.. and lots of other things, some more info is here:
http://wiki.blender.org/index.php/BlenderDev/Particles_Rewrite
http://wiki.blender.org/index.php/BlenderDev/Particles_Rewrite_Doc
The new particle system cannot be backwards compatible. Old particle
systems are being converted to the new system, but will require
tweaking to get them looking the same as before.
Point Cache
===========
The new system to replace manual baking, based on automatic caching
on disk. This is currently used by softbodies and the particle system.
See the Cache API section on:
http://wiki.blender.org/index.php/BlenderDev/PhysicsSprint
Documentation
=============
These new features still need good docs for the release logs, help
for this is appreciated.
|
|
just the head or tail
Patch by: Roland Hess (harkyman)
For example, a constraint can be sub-targeted at the 50% (or 31.2% or 85% etc.) point of its target bone, giving you enormous rigging flexibility and removing the need for complex contraptions to do such things as:
- A bone whose base slides only between to points on a rig (CopyLoc with a variable, animated subtarget point)
- Bones that attach to multiple points along another bone (CopyLocs, each with a different head/tail percentage)
- Bones that need to stretch to a point midway between specific spots on two other bones (old way: too crazy to mention; new way: stretch bone between points on end bones, then another stretch to the midpoint of the first stretch)
It is only used for the constraint types for which it is relevant: CopyLoc, TrackTo, StretchTo and MinMax, TrackTo, and Floor.
Notes:
- This is accessed by the Head/Tail number-slider.
- This value can be animated per constraint
- The old "Copy Bone Tail" option for the CopyLoc constraint has been automatically converted to 1.0 Head/Bone values for the affected constraints
- In the code, this value is in the bConstraint struct, so it is available for all constraints, even though only a few implement it.
|
|
"Rotation Difference"
This option, for Bones, allows the angle between two Bones to be
the driver for another Ipo channel. This angle now is hardcoded
based on the Bone-space orientation (without parenting rotation).
Thanks to nathan for poking and test!
|
|
Added a few comments about various Animation-System Related structs. Hopefully, these will be helpful for people trying to get familiar with the code.
|
|
It is now possible to temporarily 'mute' and IPO-block or IPO-curve. This functionality has been requested by the Plumiferos team, and is based off Patch #6866 by Juho Vepsäläinen (bebraw).
Usage:
* In the IPO Editor header, there is a toggle button (open/closed eye used for Outliner Visibility restriction) beside the IPO-blocktype menu, when there is an active IPO-block in the IPO Editor.
* In the Action Editor, beside the 'lock' icon for channel protection on Action/Constraint channels, there is the open/closed 'eye' that can be toggled to set the mute status of said channel's IPO-block.
* Also in the Action Editor, you can mute individual IPO-curve channels in a similar manner.
|
|
Continuing on from my previous 'Expandable/Collapsable Action Channel' commit, this commit introduces the ability to show/hide the keyframes in each ipo-curve represented by an Action Channel.
When you expand an Action-Channel by clicking on the triangle beside its name, you will now be presented with options to show/hide the ipo-curves represented by
the Action-Channel, and/or the Constraint Channels belonging to that Action-Channel. Actual ipo-curves will not be drawn in the Action-Editor, but the keyframes
will be shown.
Screenshot:
* http://wiki.blender.org/index.php/Image:244_ActionEditor_SubTracks_01.png
Possibly Coming Soon/Further Work:
* 'Protection' options for ipo-curves (currently disabled in code, as all IPO-related
tools will need to be made aware of this)
* Sliders for IPO-Curve Channels of the active Action-Channel
|
|
- Bugfix #5714
New option "Save changed images" didn't respect relative file names
- Bugfix #5621
New camera (shiftx, shifty) was missing in IpoWindow as animatable option
|
|
other are changes so calchandles_ipocurve only calc handels on a bezier line.
This makes bvh import faster but should also speed up internal IPO operations.
|
|
issues in parallel... So this commit contains: an update of
the solver (e.g. moving objects), integration of blender IPOs,
improved rendering (motion blur, smoothed normals) and a first particle
test. In more detail:
Solver update:
- Moving objects using a relatively simple model, and not yet fully optimized - ok
for box falling into water, water in a moving glass might cause trouble. Simulation
times are influenced by overall no. of triangles of the mesh, scaling meshes up a lot
might also cause slowdowns.
- Additional obstacle settings: noslip (as before), free slip (move along wall freely)
and part slip (mix of both).
- Obstacle settings also added for domain boundaries now, the six walls of the domain are
obstacles after all as well
- Got rid of templates, should make compiling for e.g. macs more convenient,
for linux there's not much difference. Finally got rid of parser (and some other code
parts), the simulation now uses the internal API to transfer data.
- Some unnecessary file were removed, the GUI now needs 3 settings buttons...
This should still be changed (maybe by adding a new panel for domain objects).
IPOs:
- Animated params: viscosity, time and gravity for domains. In contrast
to normal time IPO for Blender objects, the fluidsim one scales the time
step size - so a constant 1 has no effect, values towards 0 slow it down,
larger ones speed the simulation up (-> longer time steps, more compuations).
The viscosity IPO is also only a factor for the selected viscosity (again, 1=no effect).
- For objects that are enabled for fluidsim, a new IPO type shows up. Inflow
objects can use the velocity channels to animate the inflow. Obstacles, in/outflow
objects can be switched on (Active IPO>0) and off (<0) during the simulation.
- Movement, rotation and scaling of those 3 types is exported from the normal
Blender channels (Loc,dLoc,etc.).
Particles:
- This is still experimental, so it might be deactivated for a
release... It should at some point be used to model smaller splashes,
depending on the the realworld size and the particle generation
settings particles are generated during simulation (stored in _particles_X.gz
files).
- These are loaded by enabling the particle field for an arbitrary object,
which should be given a halo material. For each frame, similar to the mesh
loading, the particle system them loads the simulated particle positions.
- For rendering, I "abused" the part->rt field - I couldnt find any use
for it in the code and it seems to work fine. The fluidsim particles
store their size there.
Rendering:
- The fluidims particles use scaled sizes and alpha values to give a more varied
appearance. In convertblender.c fluidsim particle systems use the p->rt field
to scale up the size and down the alpha of "smaller particles". Setting the
influence fields in the fluidims settings to 0 gives equally sized particles
with same alpha everywhere. Higher values cause larger differences.
- Smoothed normals: for unmodified fluid meshes (e.g. no subdivision) the normals
computed by the solver are used. This is basically done by switching off the
normal recalculation in convertblender.c (the function calc_fluidsimnormals
handles other mesh inits instead of calc_vertexnormals).
This could also be used to e.g. modify mesh normals in a modifier...
- Another change is that fluidsim meshes load the velocities computed
during the simulation for image based motion blur. This is inited in
load_fluidsimspeedvectors for the vector pass (they're loaded during the
normal load in DerivedMesh readBobjgz). Generation and loading can be switched
off in the settings. Vector pass currently loads the fluidism meshes 3 times,
so this should still be optimized.
Examples:
- smoothed normals versus normals from subdividing once:
http://www10.informatik.uni-erlangen.de/~sinithue/temp/v060227_1smoothnorms.png
http://www10.informatik.uni-erlangen.de/~sinithue/temp/v060227_2subdivnorms.png
- fluidsim particles, size/alpha influence 0:
http://www10.informatik.uni-erlangen.de/~sinithue/temp/v060227_3particlesnorm.png
size influence 1:
http://www10.informatik.uni-erlangen.de/~sinithue/temp/v060227_4particlessize.png
size & alpha influence 1:
http://www10.informatik.uni-erlangen.de/~sinithue/temp/v060227_5particlesalpha.png
- the standard drop with motion blur and particles:
http://www10.informatik.uni-erlangen.de/~sinithue/temp/elbeemupdate_t2new.mpg
(here's how it looks without
http://www10.informatik.uni-erlangen.de/~sinithue/temp/elbeemupdate_t1old.mpg)
- another inflow animation (moving, switched on/off) with a moving obstacle
(and strong mblur :)
http://www10.informatik.uni-erlangen.de/~sinithue/temp/elbeemupdate_t3ipos.mpg
Things still to fix:
- rotating & scaling domains causes wrong speed vectors
- get rid of SDL code for threading, use pthreads as well?
- update wiki documentation
- cool effects for rendering would be photon maps for caustics,
and motion blur for particles :)
|
|
- Adds missing ipos for texture
* color, contrast, brightness
- Adds IKey menu in the texture subcontext
#3711 (bug tracker)
- report and patch for missing blend types Halo and Radial
Patches by Levon Hudson
|
|
First note that this is new functionality, unfinished, and only for
testing and feedback purposes. I'll list below what works, and what will
need work still.
This text is also in cms: http://www.blender.org/cms/Ipo_Drivers.680.0.html
An IpoDriver is like an IpoCurve, but instead of a Bezier curve, it allows
to connect a property of other Objects as input for the "channel". For
example, IpoDrivers can be used to have a Shape Key being "driven" by
the rotation of a Bone. Or the RGB colors of a Material get driven by the
XYZ location of an Object.
Editing of Drivers happens in the IpoWindow. Here you can notice that the
channels (right hand window) now have an "active" channel indicator.
To add a Driver, you have to use the "Transform Properties" Panel (Nkey).
Here you can add or remove a Driver to the active channel, and use the
buttons to fill in what kind of relationship you want to establish.
Driver Objects
Note that any Ipo Channel can become driven now, but that only Object
transformation or Pose Bone transformation can be used to become a
Driver now.
At this moment, only the local transformation is taken into account.
For Objects that means the location/rotation/scale value without Parent
transform (as shown in "Transform Properties" Panel for Objects).
For Pose Bones it means that only the Pose transform (changes of rest
position) is Driver information (also as shown in Transform Property
Panel in Pose Mode).
Mapping of Drivers
When an Ipo Channel is "driven", the mapping is by default one-to-one.
It is only restricted by already built-in limits for Channels, like
for Material the "R" value can only range from 0.0 to 1.0.
Also note that when mapping rotations, the actual rotation values
in Ipos are scaled down with a factor 10.0. (180 degrees actually has
in the Ipo system a value of 18.0). This is an ancient year zero
convention in Blender... it is a bit hidden, because the ruler
(vertical as well as horizontal) displays the virtual values correctly.
Only the Properties panel shows the actual value.
When you draw an IpoCurve in a Driven channel, this curve will define
the mapping between the Driver output (horizontal) and Driven input
(vertical, as usual).
A nice new option to use is "Insert one-to-one curve" (press I-key,
or in pulldown menu). This will also zoom the display in exactly to
fill the window, allowing easy edit. If you use this option with
degrees, it will map 180 degree rotation to a range of 1.0 unit.
Live updates
Since the Drivers are integrated in the Ipo system, they will always
be updated whenever an Ipo is evaluated. This happens at least on
frame changes.
For interactive feedback, updates while transforming objects were
added in these cases:
- Driven Object Ipos, by other Objects or Pose Bones
- Driven Shape Key Ipos, by other Objects or Pose Bones
You can also insert Drivers on Action Ipos, but these are only evaluated
on frame change now.
Todo
- Drivers can also get a text button, allowing a 1 line Python script
to be executed.
- Make UI for it a bit less hidden... maybe with visualization in 3D?
- Allowing global transform coordinates as Driver too.
Issues
- renaming Bones won't rename drivers
- (file) appending the Ipo won't append the linked driver Objects
|
|
Ipocurves with "Auto" handles now have option to remain horizontal on the
extrema (tops & valleys). Use ALT+H to set this per selected curve.
Note this is a per-curve feature, not per-handle.
If it works satisfying I can check on making this the default new added
curve.
|
|
Aim was to get a total refresh of the animation system. This
is needed because;
- we need to upgrade it with 21st century features
- current code is spaghetti/hack combo, and hides good design
- it should become lag-free with using dependency graphs
A full log, with complete code API/structure/design explanation
will follow, that's a load of work... so here below the list with
hot changes;
- The entire object update system (matrices, geometry) is now
centralized. Calls to where_is_object and makeDispList are
forbidden, instead we tag objects 'changed' and let the
depgraph code sort it out
- Removed all old "Ika" code
- Depgraph is aware of all relationships, including meta balls,
constraints, bevelcurve, and so on.
- Made depgraph aware of relation types and layers, to do smart
flushing of 'changed' events. Nothing gets calculated too often!
- Transform uses depgraph to detect changes
- On frame-advance, depgraph flushes animated changes
Armatures;
Almost all armature related code has been fully built from scratch.
It now reveils the original design much better, with a very clean
implementation, lag free without even calculating each Bone more than
once. Result is quite a speedup yes!
Important to note is;
1) Armature is data containing the 'rest position'
2) Pose is the changes of rest position, and always on object level.
That way more Objects can use same Pose. Also constraints are in Pose
3) Actions only contain the Ipos to change values in Poses.
- Bones draw unrotated now
- Drawing bones speedup enormously (10-20 times)
- Bone selecting in EditMode, selection state is saved for PoseMode,
and vice-versa
- Undo in editmode
- Bone renaming does vertexgroups, constraints, posechannels, actions,
for all users of Armature in entire file
- Added Bone renaming in NKey panel
- Nkey PoseMode shows eulers now
- EditMode and PoseMode now have 'active' bone too (last clicked)
- Parenting in EditMode' CTRL+P, ALT+P, with nice options!
- Pose is added in Outliner now, with showing that constraints are in
the Pose, not Armature
- Disconnected IK solving from constraints. It's a separate phase now,
on top of the full Pose calculations
- Pose itself has a dependency graph too, so evaluation order is lag free.
TODO NOW;
- Rotating in Posemode has incorrect inverse transform (Martin will fix)
- Python Bone/Armature/Pose API disabled... needs full recode too
(wait for my doc!)
- Game engine will need upgrade too
- Depgraph code needs revision, cleanup, can be much faster!
(But, compliments for Jean-Luc, it works like a charm!)
- IK changed, it now doesnt use previous position to advance to next
position anymore. That system looks nice (no flips) but is not well
suited for NLA and background render.
TODO LATER;
We now can do loadsa new nifty features as well; like:
- Kill PoseMode (can be option for armatures itself)
- Make B-Bones (Bezier, Bspline, like for spines)
- Move all silly button level edit to 3d window (like CTRL+I = add
IK)
- Much better & informative drawing
- Fix action/nla editors
- Put all ipos in Actions (object, mesh key, lamp color)
- Add hooks
- Null bones
- Much more advanced constraints...
Bugfixes;
- OGL render (view3d header) had wrong first frame on anim render
- Ipo 'recording' mode had wrong playback speed
- Vertex-key mode now sticks to show 'active key', until frame change
-Ton-
|
|
Pressing AKEY in channel buttons (names) of IpoWindow did not show all or
hide all anymore. Was due to commit last july, which enabled unlimited
amount of channels.
|
|
channels to link texture to.
The amount of code changes seems large, but is mostly getting rind of
hardcoded values (6 and 8) for channels, replacing it with MAX_MTEX.
Further did some fixes;
- Ipo for Lamp showed too many mapping channels
- Texture MapTo buttons for lamp missed the slider to blend texture color
- Lamp texture mapping "View" only worked for Spot, now it uses lamp-
view vector for all types. (Nice for projections!)
|
|
Texture matrix bug in plugin code reported by Mel_Q.
Vertex colors, this was basically the same as the previous uv coord
splitting bug, for xml export, uv coord splitting was actually not quite
complete either (reported by richie).
Added:
Camera Ipo curves for DoF aperture and focal distance.
Aspect ratio set with AspX & AspY are now taken into account as well.
(needs yafray from cvs)
Bokeh parameters for DoF (also needs yafray from cvs).
'Bokeh' controls the shape of out of focus points when rendering
with depth of field enabled.
This is mostly visible on very out of focus highlights in the image.
There are currently seven types to choose from.:
'Disk1' is the default, the same as was used before.
'Disk2' is similar, but allows you to modify the shape further with the 'bias'
parameter, see below.
Triangle/Square/Pentagon/Hexagon, in addition to the bias control, you can
offset the rotation with the 'Rotation' parameter (in degrees).
'Ring', a weird ring shaped lens, no additional controls.
The 'bias' menu controls accentuation of the shape.
Three types available, uniform, center or edge, with uniform the default.
Although based on an actual phenomenon of real camera's, the current
code is bit of a hack and not physically based, and doesn't work all that
well yet (in yafray anyway). Since this is also mostly visible in the very
out of focus parts of the image, it usually also means that you need lots
of samples to get a reasonably smooth result.
|
|
thread on frontpage:
* Quaternion action ipos accidently got swapped in the Ipo module
* Ipos not editable if not linked to a datablock (was possible in 2.33a)
Also fixed a typo in Object.getMatrix(): localespace -> localspace
And I add:
* channels Key 32 through Key 63 for relative vertex keys
|
|
- now more than 31 channels possible for ipos
- added lotsa new channels all over
- Texture block has ipo now too
- recoded getname_ei functions
(Will ask nathan to give release log info when he's back!)
|
|
* removed 32 channel limit (can now have 50, or of you know what number to change, 999 ;)
* added new IPOs: mirror fresnel and fac, transparency fresnel and fac, and glow factor transparent materials (add)
|
|
* Cleaned out IPO #defines
|
|
New is that objects can have a force field, and Meshes can even deflect
(collide) particles. This is in a new sub-menu in Object buttons F7
The full instructions where on the web, Leon mailed it me and I will put
it in CMS tomorrow. For those who like to play with it now, here are demo
files:
http://download.blender.org/demo/test/
Quite some changes where in the integration though... so previous created
particle deflectors will not work. Changes to mention now are:
- gravity is renamed to 'force field'
- force field and deflector options are in Object now, not in Mesh
- the options also have its own struct, doesnt add to Object by default
- force fields are possible for all object types, but only work on center.
So empty objects are typical for it.
Work to do:
- add draw method in 3d win to denote forcefield objects
- check on the UI (panel with different size?)
- add 'recalc' button in deflector panel
|
