Age | Commit message (Collapse) | Author |
|
This patch fixes many minor spelling mistakes, all in comments or
console output. Mostly contractions like can't, won't, don't, its/it's,
etc.
Differential Revision: https://developer.blender.org/D11663
Reviewed by Harley Acheson
|
|
Differential Revision: https://developer.blender.org/D10387
|
|
After {rBa0867f05a48e2017a}, it is no longer necessary to pad
structs with 1 and 2 byte sizes. Most of these are geometry node
structs, where we've been avoiding using `node.custom1`.
I only found two others, the freestyle flags in custom data DNA.
Differential Revision: https://developer.blender.org/D10335
|
|
|
|
Some DNA headers already did this, most did not. Even though many of them would
be included in C++ files and thus compiled as C++. This would be confusing and
developers may think they have to add `extern "C"` too a whole lot of
(indirect) includes to be able to use a C header in C++.
However, this is a misconception.
`extern "C"` does not cause code to be compiled with C rather than C++! It only
causes the linker to not use C++ function name mangling. See
https://stackoverflow.com/a/1041880.
Because extern DNA headers don't have function declarations, using `extern "C"`
actually should not have any effect. On the other hand, adding it causes no
harm and avoids confusion. So let's just have it consistently in C header
files.
Differential Revision: https://developer.blender.org/D9578
Reviewed by: Bastien Montagne, Sybren Stüvel
|
|
It was rather a huge chunk of code, which started to become
more harder to maintain with the transition to OpenSubdiv based
implementation. Because of this transition, the compatibility was
also rather on a poor side.
Remove compatibility support for pre-2.50.9 multires.
Ref T77107
Reviewed By: brecht, mont29
Differential Revision: https://developer.blender.org/D9238
|
|
Corrects incorrect usage of contraction for 'it is', when possessive 'its' was required.
Differential Revision: https://developer.blender.org/D9250
Reviewed by Campbell Barton
|
|
This replaces header include guards with `#pragma once`.
A couple of include guards are not removed yet (e.g. `__RNA_TYPES_H__`),
because they are used in other places.
This patch has been generated by P1561 followed by `make format`.
Differential Revision: https://developer.blender.org/D8466
|
|
This reverts commit 39b525e0f07fa25dcda54226ade789959b642dec and
3121015dceb1d269d79690c8f15c8e1406c9b09f as tests are failing.
|
|
Use binary search for querying deform weights.
Spring 02_020_A.anim.blend on Ryzen 1700X goes from 12.4 to 12.7fps.
During profiling it was detected that adding new items to the head was faster than adding to the tail.
Reviewed By: Campbell Barton
Differential Revision: https://developer.blender.org/D8127
|
|
Sculpt Vertex Colors is a painting system that runs inside sculpt mode, reusing all its tools and optimizations. This provides much better performance, easier to maintain code and more advanced features (new brush engine, filters, symmetry options, masks and face sets compatibility...). This is also the initial step for future features like vertex painting in Multires and brushes that can sculpt and paint at the same time.
This commit includes:
- SCULPT_UNDO_COLOR for undo support in sculpt mode
- SCULPT_UPDATE_COLOR and PBVH flags and rendering
- Sculpt Color API functions
- Sculpt capability for sculpt tools (only enabled in the Paint Brush for now)
- Rendering support in workbench (default to Sculpt Vertex Colors except in Vertex Paint)
- Conversion operator between MPropCol (Sculpt Vertex Colors) and MLoopCol (Vertex Paint)
- Remesher reprojection in the Voxel Remehser
- Paint Brush and Smear Brush with color smoothing in alt-smooth mode
- Parameters for the new brush engine (density, opacity, flow, wet paint mixing, tip scale) implemented in Sculpt Vertex Colors
- Color Filter
- Color picker (uses S shortcut, replaces smooth)
- Color selector in the top bar
Reviewed By: brecht
Maniphest Tasks: T72866
Differential Revision: https://developer.blender.org/D5975
|
|
This implements a generic color datalayer and its functions. Based on
D5975.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7838
|
|
This was not set anywhere, code relies on MLOOPUV_VERTSEL everywhere.
BMLoopUV.select_edge was never returning True and wasnt updating uv
select state when set manually.
Afaict, there were no official Addons using this from python.
Resolves T65836
Maniphest Tasks: T65836
Differential Revision: https://developer.blender.org/D6772
|
|
While the file in this report had corrupted values,
this is avoidable without adding any extra overhead.
Use unsigned vertex group indices since we don't need negative values,
this is an alternative to checking they aren't negative in many places.
Vertex group values over INT_MAX is still considered invalid,
so any accidental unsigned wrapping won't be silently ignored.
|
|
|
|
This file had become disorganized, it wasn't clear which structs/flags
were deprecated.
- Add comments explaining what each struct is for.
- Use doxy sections.
- Remove outdated notes, unused flags.
- Group custom-data.
- Group deprecated structs in their own section.
T
|
|
Also correct some outdated symbol references,
add missing 'name' commands.
|
|
|
|
|
|
Previously in 2.79 we were using a specialized drawing using derivedMesh.
Now the subsurf modifier tag each center vertex as facedot and let the
DRWManager pick it up.
Some modifiers (deforming ones) do not clear the tag so we can use this
technique even if there is deforming modifiers after subsurf modifiers.
|
|
Prepare for enabling ReflowComments.
|
|
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
|
|
Avoids mixing these in with regular variables in code-completion.
Use char for pad members except for 'void *', to make size clearer.
Removed/shrink a few redundant padding vars which were >= 8 bytes.
|
|
While \file doesn't need an argument, it can't have another doxy
command after it.
|
|
Move \ingroup onto same line to be more compact and
make it clear the file is in the group.
|
|
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
|
|
Prevents clang-format wrapping text before comments.
|
|
Needed for clang-format in some cases, see: T53211
|
|
Not all three sides of a tesselated mesh triangle are guaranteed
to be original mesh edges, so a somewhat complicated check is
required to detect which ones are real. It seems that until now
there was no utility function for that, only some example code.
|
|
Loop triangles are tessellated triangles create from polygons, for renderers
or exporters that need to match Blender's polygon tesselation exactly. These
are a read-only runtime cache.
Tessfaces are a legacy data structure from before Blender supported n-gons,
and were already mostly removed from the C code.
Details on porting code to loop triangles is in the release notes.
Differential Revision: https://developer.blender.org/D3539
|
|
Differential Revision: https://developer.blender.org/D3736
|
|
|
|
Some sort of rudiment from many years ago, is never set by 2.5x code.
|
|
|
|
|
|
For real guys! Test your example code!
|
|
|
|
Convention was only followed loosely,
apply to DNA where changes aren't likely to conflict.
(Skipped ModifierType for eg).
|
|
- MTexPoly structure & layer type.
- The 'Mesh.uv_textures' layers.
- DerivedMesh TexFace drawing.
- Scripts & UI.
|
|
- Derived-mesh drawing.
- All non UV members of TexFace structs.
MTexPoly is now redundant but keeping with a dummy member,
will check on complete removal later.
|
|
TexFace complicates the now more popular shading pipeline by having
per-face images, see: T51382 for details.
To keep the ability to select a per-material edit-image
(used with UV-mapping workflow), the material now stores an image
which will be set when changing images in edit-mode.
This is used as a bake-target when not using Cycles too.
|
|
|
|
|
|
|
|
|
|
|
|
Note that the collision modifier doesn't have any use for Loop indices,
so to avoid duplicating the loop array too,
MVertTri has been added which simply stores vertex indices (runtime only).
|
|
This stores loop indices into the loop array giving easier acess
to data such as vertex-colors and UV's,
removing the need to store an MFace duplicate of custom-data.
This doesn't yet move all internal code from MFace to LoopTri just yet.
Only applies to:
- opengl drawing
- sculpting (pbvh)
- vertex/weight paint
Thanks to @psy-fi for review, fixes and improvements to drawing!
|