| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
The `bisect_distance` in the mirror modifier was hard-coded to `0.001`.
This would result in some unexpected behavior like vertices close
to the mirror plane being deleted or merged.
The fix now adds a parameter to the mirror modifier to expose the
bisect distance to the user. The default is set to the previous
hard-coded value to not "change" previous files.
Ref D10201
|
|
|
|
The commit rB6f63417b500d that made exact boolean work on meshes
with holes (like Suzanne) unfortunately dramatically slowed things
down on other non-manifold meshes that don't have holes and didn't
need the per-triangle insideness test.
This adds a hole_tolerant parameter, false by default, that the user
can enable to get good results on non-manifold meshes with holes.
Using false for this parameter speeds up the time from 90 seconds
to 10 seconds on an example with 1.2M triangles.
|
|
|
|
|
|
|
|
Things like pointers to particle systems, or softbody data being stored
outside of its modifier, make it impossible for internal modifier copy
data code to be self-contained currently. It requires extra processing.
In existing code this was handled in several different places, in
several ways, and alltogether fairly inconsistently. Some cases were
even not properly handled, causing e.g. crashes as in T82945.
This commit addresses those issues by:
* Adding comments about the hackish/unsafe parts `psys` implies when
copying some modifier data (since we need to ensure particle system
copying and remapping of those pointers separately).
* Adding as-best-as-possible handling of those cases to
`BKE_object_copy_modifier` (note that it remains fragile, but is
expected to behave 'good enough' in any practical usecase).
* Remove special handling for specific editor code
(`copy_or_reuse_particle_system`). This should never have been
accepted in ED code area, and is now handled by
`BKE_object_copy_modifier`.
* Factorize copying of the whole modifier stack into new
`BKE_object_modifier_stack_copy`, now used by both `object_copy_data`
and `BKE_object_link_modifiers`.
Note that this implies that `BKE_object_copy_modifier` and
`BKE_object_copy_gpencil_modifier` are now to be used exclusively to
copy single modifiers. Full modifier stack copy should always use
`BKE_object_modifier_stack_copy` instead.
Fix T82945: Crash when dragging modifiers in Outliner.
Maniphest Tasks: T82945
Differential Revision: https://developer.blender.org/D10148
|
|
|
|
Implement improvement from T73139 for merging along edges.
It is now called "Connected" mode, while the default is called "All".
With the recent performance improvement, the Connected Mode is in some
cases only double the speed than the usual merge all strategy but in
other cases it may be even faster. The bottleneck is somewhere further
down the line of merging geometry.
The motivation for this patch came from T80897, because the merging in
complex solidify is making it very slow.
Now merging can be removed from solidify without greater consequences,
as this is just a quicker and more advanced algorithm to do the same
thing that solidify currently does slowly.
Reviewed by: mano-wii, campbellbarton
Ref D8966
|
|
Rerun `make format`.
No functional changes.
|
|
This commit adds functions to set and get the object's active
modifier, which is stored as a flag in the ModifierData struct,
similar to constraints. This will be used to set the context in
the node editor. There are no visible changes in this commit.
Similar to how the node editor context works for materials, this commit
makes the node group displayed in the node editor depend on the active
object and its active modifier. To keep the node group from changing,
just pin the node group in the header.
* Shortcuts performed while there is an active modifier will affect
only that modifier (the exception is the A to expand the modifiers).
* Clicking anywhere on the empty space in a modifier's panel will make it active.
These changes require some refactoring of object modifier code. First
is splitting up the modifier property invoke callback, which now needs
to be able to get the active modifier separately from the hovered
modifier for the different operators.
Second is a change to removing modifiers, where there is now a separate
function to remove a modifier from an object's list, in order to handle
changing the active.
Finally, the panel handler needs a small tweak so that this "click in panel"
event can be handled afterwards.
|
|
This is the initial merge from the geometry-nodes branch.
Nodes:
* Attribute Math
* Boolean
* Edge Split
* Float Compare
* Object Info
* Point Distribute
* Point Instance
* Random Attribute
* Random Float
* Subdivision Surface
* Transform
* Triangulate
It includes the initial evaluation of geometry node groups in the Geometry Nodes modifier.
Notes on the Generic attribute access API
The API adds an indirection for attribute access. That has the following benefits:
* Most code does not have to care about how an attribute is stored internally.
This is mainly necessary, because we have to deal with "legacy" attributes
such as vertex weights and attributes that are embedded into other structs
such as vertex positions.
* When reading from an attribute, we generally don't care what domain the
attribute is stored on. So we want to abstract away the interpolation that
that adapts attributes from one domain to another domain (this is not
actually implemented yet).
Other possible improvements for later iterations include:
* Actually implement interpolation between domains.
* Don't use inheritance for the different attribute types. A single class for read
access and one for write access might be enough, because we know all the ways
in which attributes are stored internally. We don't want more different internal
structures in the future. On the contrary, ideally we can consolidate the different
storage formats in the future to reduce the need for this indirection.
* Remove the need for heap allocations when creating attribute accessors.
It includes commits from:
* Dalai Felinto
* Hans Goudey
* Jacques Lucke
* Léo Depoix
|
|
The Vertex Weight Edit Modifier already got the Custom Curve, there was no
real reason for the proximity not to have it as well.
With some fixes by Bastien Montagne (@mont29).
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D9594
|
|
This commit uses an enum to access expansion for specific panels for
each modifier, constraint, etc. Even though these values are quite simple,
this can help make the code more explicit when the ui_expand_flag is
accessed directly. Also update comments about this bitfield to make
them consistent.
|
|
The simple subdivision as a type only causes issues like no-continuous
normals across edges, inability to reliably switch the type and things
like this.
The new subdivision operators supports wider variety of how to add
details to the model, which are more powerful than a single one-time
decision on the subdivision type.
The versioning code is adjusting topology converter to specify all
edges as infinitely sharp. The reason for this (instead of using
settings.is_simple) is because in a longer term the simple subdivision
will be removed from Subsurf modifier as well, and will be replaced
with more efficient bmesh-based modifier.
This is finished up version of D8436.
Differential Revision: https://developer.blender.org/D9350
|
|
These flags shouldn't be used except in versioning code.
|
|
The design for how we approach the "Everything Nodes" project
has changed. We will focus on a different part of the project initially.
While future me will likely refer back to some of the code I remove here,
there is no point in keeping this code around in master currently.
It would just confuse other developers working on the project.
This does not remove the simulation modifier and data block. Those are
just cleaned up, so that the boilerplate code can be reused in the future.
|
|
This modifier is the opposite of the recently added Mesh to Volume modifier.
It converts the "surface" of a volume into a mesh. The "surface" is defined
by a threshold value. All voxels with a density higher than the threshold
are considered to be inside the volume, while all others will be outside.
By default, the resolution of the generated mesh depends on the voxel
size of the volume grid. The resolution can be customized. It should be
noted that a lower resolution might not make this modifier faster. This
is because we have to downsample the openvdb grid, which isn't a cheap
operation.
Converting a mesh to a volume and then back to a mesh is possible,
but it does require two separate mesh objects for now.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D9141
|
|
|
|
This modifier uses a 3D texture to displace a volume.
For now, this can only use the previously existing texture system,
because we do not have a better alternative yet. Still, the results
can be quite good and interesting. See D9075 for some examples.
Reviewers: brecht, simonthommes
Differential Revision: https://developer.blender.org/D9075
|
|
This adds the option to either smooth the entire boundary, or to keep
corners sharp, for the Subdivision Surface and Multiresolution modifiers.
This mainly helps with compatibility with other software. The default
behavior remains to smooth the entire boundary.
Differential Revision: https://developer.blender.org/D8485
|
|
This makes subdivision surfaces compatible with the old subdivision
surface modifier and other applications that do not use the limit surface.
This option is available on the Subdivision Surface modifier.
Differential Revision: https://developer.blender.org/D8413
|
|
Add an option to disable Alembic vertex interpolation.
Bump subversion from 5 to 6.
Alembic stores mesh samples at specific time keys; when a frame in
Blender maps to a timecode between two samples, Blender will interpolate
the mesh vertex positions. This interpolation only happens when the mesh
has a constant topology, but sometimes this was not detected properly
when the vertices change order, but the number of mesh elements remains
the same. This would result in a mesh with jumbled up vertices (T71981).
With this patch, users have the ability to disable vertex interpolation.
An alternative would be to have better detection of topology changes,
but that that'll cause a considerable slowdown.
Maniphest Tasks: T71981
Differential Revision: https://developer.blender.org/D9041
|
|
This modifier can only be added to Volume objects. It takes a mesh
as input and generates a "density" grid near the surface or in
the enclosed volume.
Ref T73201.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D9032
|
|
This commit replaces the BVH Tree currently used by the Weld Modifier
with the KD Tree used by `Merge > By Distance`.
This changes the result of the Weld Modifier to more closely match
`Merge > By Distance`.
There is also a big performance advantage.
Here is an overview (models in D8995):
| 2.90 (Duplicate Limit = 0) | 2.90 (Duplicate Limit = 1) | master (BVH) (Duplicate Limit = 1) | patch (KD) |
| 1.69s| 0.17s | 0.12s | 0.029s |
Differential Revision: https://developer.blender.org/D8995
|
|
Also added code so that exact solver does the whole collection at once.
This patch allows users to use a collection (as an alternative to Object)
for the boolean modifier operand, and therefore get rid of a long modifier stack.
|
|
With this option, self-intersections in either or both operands
will be handled properly (if both sides are piecewise winding
number constant, and maybe some other cases too).
In the Boolean tool, this flag was there already but the code
forced a unary operation in that case; this commit corrects it
to make a binary operation. This flag makes the code slower, which
is why it is an option and not an always-on thing.
|
|
This is for design task T67744, Boolean Redesign.
It adds a choice of solver to the Boolean modifier and the
Intersect (Boolean) and Intersect (Knife) tools.
The 'Fast' choice is the current Bmesh boolean.
The new 'Exact' choice is a more advanced algorithm that supports
overlapping geometry and uses more robust calculations, but is
slower than the Fast choice.
The default with this commit is set to 'Exact'. We can decide before
the 2.91 release whether or not this is the right choice, but this
choice now will get us more testing and feedback on the new code.
|
|
This adds an option to the Multires modifier to sculpt directly on the
base mesh while previewing the displacement of a higher subdivisions
level. What this does it considering Multires as a regular modifier
without exposing the grid displacement to sculpt mode.
This allows to see the propagation happening in real time, which enables
to use complex tools like Cloth or Pose in much higher resolutions and
without surface noise and artifacts.
Reviewed By: sergey, Severin
Differential Revision: https://developer.blender.org/D8555
|
|
Allows to keep track of modifiers, which is required, for example,
for runtime data preservation in depsgraph.
|
|
|
|
This replaces header include guards with `#pragma once`.
A couple of include guards are not removed yet (e.g. `__RNA_TYPES_H__`),
because they are used in other places.
This patch has been generated by P1561 followed by `make format`.
Differential Revision: https://developer.blender.org/D8466
|
|
Following work done in 2.83, the resolution control is now a real
level-of-detail parameter. It is now useful to be able to set the
resolution for display independently from render. This is true for
both mesh generation and mesh deformation modes.
For compatibility with old scenes, resolution is retained and is the
render resolution. Old modifiers loaded have the value of resolution
also applied to viewport resolution. This allows newer modifiers to
be used in older versions without trouble
Differential Revision: https://developer.blender.org/D8336
|
|
This patch adds the ability to render motion blur from Alembic caches.
The motion blur data is derived from a velocity attribute whose name has
to be defined by the user through the MeshSequenceCache modifier, with a
default value of ".velocities", which is the standard name in Alembic
for the velocity property, although other software may ignore it and
write velocity with their own naming convention (e.g. "v" in Houdini).
Furthermore, a property was added to define how the velocity vectors
are interpreted with regard to time : frame or second. "Frame"
means that the velocity is already scaled by the time step and we do not
need to modify it for it to look proper. "Second" means that the unit
the velocity was measured in is in seconds and so has to be scaled by
some time step computed here as being the time between two frames (1 /
FPS, which would be typical for a simulation). This appears to be
common, and is the default behavior.
Another property was added to control the scale of the velocity to
further modify the look of the motion blur.
Reviewed By: brecht, sybren
Differential Revision: https://developer.blender.org/D2388
|
|
|
|
This matches the change that was done to the bevel modifier so that the
interface for the modifier, the active tool, and the operator are consistent.
This commit extends the refactor to the bmesh implementation too, so
that the parameters in the implementation don't stray too far from what
is exposed.
Tests are adjusted and still pass.
|
|
Every Particle Simulation node has a name (or a path when it is in a node group).
This name has to be used in the Simulation modifier on a point cloud to see
the particles.
Caching has been disabled for now, because it was holding back development
a bit. To reset the simulation, go back to frame 1.
Currently, there is no way to influence the simulation. There are just some
randomly moving points. Changing that is the next step.
|
|
The eigenvectors in the ocean modifier (plus and minus) can be useful,
but are not exposed. Assuming the particle system was capable, the
eigenvectors could be used to drive spray emission velocities.
This exposes the controls to allow a map to be generated from these
eigenvectors. Currently, the values are mapped into a 0-255 range
similar to foam.
Differential Revision: https://developer.blender.org/D7182
|
|
This will allow the easier addition of a constant radius mode in the
future and some changes in the UI to mirror the recent similar change
from "Only Vertices" to the "Affect" enum.
|
|
This mode is like Percent, but measures absolute distance along
adjacent edges instead of a percentage.
So, for example, if you use this mode with 2 segments and profile=1,
you will see the length that the bevel moves along unbeveled edges
between beveled ones will match the value specified.
Many users seem to expect this behavior, even though it means the
bevel width is uneven, so this option is for them.
|
|
- Use 'float (*)[3]' to avoid casts.
- Remove unnecessary float[3] copy in gpencil_deform_verts.
- Use MEM_SAFE_FREE
- Use const arguments.
|
|
This patch implements the list panel system D7490 for modifiers.
It also moves modifier drawing to a callback in ModifierTypeInfo
in line with the extensible architecture refactoring goal T75724.
This adds a PanelRegister callback and utilities for registering
panels and subpanels. It also adds the callbacks for expansion saving
and drag and drop reordering described in D7490.
These utilities, callbacks, and other common UI elements shared
between modifiers live in MOD_ui_common.c.
Because modifier buttons are now in panels, we can make use of
subpanels for organization. The UI layouts also use the single
column layout style consistently used elsewhere in Blender.
Additionally, the mode-setting buttons are aligned and ordered
consistently with the outliner.
However, the large number of UI changes in this patch may mean
that additional polishing is required in master.
Thanks to William Reynish (@billreynish) who did a fair amount of the
layout work and to Julian Eisel (@Severin) for consistent help.
Differential Revision: https://developer.blender.org/D7498
|
|
Please note that vertices which are in a vgroup are not affected by this
option (which means that affected vertices from 'selection' modes remain
the same). Only the weights of selected vertices get inverted.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D7811
|
|
Original patch by Cody Winchester (@CodyWinch), several fixes and
cleanup by Bastien Montagne (@mont29).
Differential revision: https://developer.blender.org/D7656
|
|
For now the "Simulation" modifier only exists for point cloud objects, because
we need this for the particle system. Right now, the modifier is doing nothing.
There is a new `DEG_add_simulation_relation` function that is used
by the modifier to make sure that the simulation is evaluated before
the modifier is executed.
Reviewers: brecht, sergey
Differential Revision: https://developer.blender.org/D7549
|
|
|
|
Was flipping around the 0-1 range, now (optionally) flip around each tile.
Also added this option for BMesh bmo_mirror.
Reviewed By: campbellbarton
Maniphest Tasks: T75793
Differential Revision: https://developer.blender.org/D7460
|
|
Avoids accidents when adding/removing items from an enum.
|
