Age | Commit message (Collapse) | Author |
|
The new triangulation mode for quads is the opposite of the current default
shortest diagonal mode. It is optimal for cloth simulations using quad meshes.
Differential Revision: http://developer.blender.org/D13777
|
|
The value of this flag was only retrieved in `nodeGetActiveID`, which
wasn't used anywhere. Other than that, the `NODE_ACTIVE_ID` and
related functions seem to come from the Blender internal renderer.
Differential Revision: https://developer.blender.org/D13770
|
|
|
|
Compositor node to convert between color spaces.
Conversion is skipped when converting between the same color spaces or to or from data spaces.
Implementation done for tiled and full frame compositor.
Reviewed By: Blendify, jbakker
Differential Revision: https://developer.blender.org/D12481
|
|
|
|
This function node creates a running total of a given Vector, Float, or
Int field.
Inputs:
- Value: The field to be accumulated
- Group Index: The values of this input are used to aggregate the input
into separate 'bins', creating multiple accumulations.
Outputs:
- Leading and Trailing: Returns the running totals starting
at either the first value of each accumulations or 0 respectively.
- Total: Returns the total accumulation at all positions of the field.
There's currently plenty of duplicate work happening when multiple outputs
are used that could be optimized by a future refactor to field inputs.
Differential Revision: https://developer.blender.org/D12743
|
|
These pointers point to the new nodes when duplicating,
and their even used to point to "original" nodes for
"localized" trees. They're just a bad design decision
that make code confusing and buggy.
Instead, node copy functions now optionally add to a map
of old to new socket pointers. The case where the compositor
abused these pointers as "original" pointers are handled
by looking up the string node names.
Differential Revision: https://developer.blender.org/D13518
|
|
Goals of this refactor:
* More unified approach to updating everything that needs to be updated
after a change in a node tree.
* The updates should happen in the correct order and quadratic or worse
algorithms should be avoided.
* Improve detection of changes to the output to avoid tagging the depsgraph
when it's not necessary.
* Move towards a more declarative style of defining nodes by having a
more centralized update procedure.
The refactor consists of two main parts:
* Node tree tagging and update refactor.
* Generally, when changes are done to a node tree, it is tagged dirty
until a global update function is called that updates everything in
the correct order.
* The tagging is more fine-grained compared to before, to allow for more
precise depsgraph update tagging.
* Depsgraph changes.
* The shading specific depsgraph node for node trees as been removed.
* Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only
tagged when the output of the node tree changed (e.g. the Group Output
or Material Output node).
* The copy-on-write relation from node trees to the data block they are
embedded in is now non-flushing. This avoids e.g. triggering a material
update after the shader node tree changed in unrelated ways. Instead
the material has a flushing relation to the new `NTREE_OUTPUT` node now.
* The depsgraph no longer reports data block changes through to cycles
through `Depsgraph.updates` when only the node tree changed in ways
that do not affect the output.
Avoiding unnecessary updates seems to work well for geometry nodes and cycles.
The situation is a bit worse when there are drivers on the node tree, but that
could potentially be improved separately in the future.
Avoiding updates in eevee and the compositor is more tricky, but also less urgent.
* Eevee updates are triggered by calling `DRW_notify_view_update` in
`ED_render_view3d_update` indirectly from `DEG_editors_update`.
* Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`.
This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`.
Removing updates always has the risk of breaking some dependency that no
one was aware of. It's not unlikely that this will happen here as well. Adding
back missing updates should be quite a bit easier than getting rid of
unnecessary updates though.
Differential Revision: https://developer.blender.org/D13246
|
|
Differentiate doc-strings from title/section text.
Also use explicit doxygen references to struct members
so it's not ambiguous which member is being referenced.
Note that these changes aren't complete (some files weren't touched).
|
|
This replaces lost functionality from the old GN Attribute Map Range node.
This also adds vector support to the shader version of the node.
Notes:
This breaks forward compatibility as this node now uses data storage.
Reviewed By: HooglyBoogly, brecht
Differential Revision: https://developer.blender.org/D12760
|
|
Code is simpler when the uiBlocks used during drawing are simply
stored in an array. Additionally, looping can be simpler when we use
an vector to hold a temporary copy of the tree's linked list of nodes.
This patch also slightly changes how uiBlocks are "named" in
`node_uiblocks_init`. Now it uses the node name instead of the
pointer, which is helpful so we rely less on the node's address.
Differential Revision: https://developer.blender.org/D13540
|
|
This patch refactors the instance-realization code and adds new functionality.
* Named and anonymous attributes are propagated from instances to the
realized geometry. If the same attribute exists on the geometry and on an
instance, the attribute on the geometry has precedence.
* The id attribute has special handling to avoid creating the same id on many
output points. This is necessary to make e.g. the Random Value node work
as expected afterwards.
Realizing instance attributes has an effect on existing files, especially due to the
id attribute. To avoid breaking existing files, the Realize Instances node now has
a legacy option that is enabled for all already existing Realize Instances nodes.
Removing this legacy behavior does affect some existing files (although not many).
We can decide whether it's worth to remove the old behavior as a separate step.
This refactor also improves performance when realizing instances. That is mainly
due to multi-threading. See D13446 to get the file used for benchmarking. The
curve code is not as optimized as it could be yet. That's mainly because the storage
for these attributes might change soonish and it wasn't worth optimizing for the
current storage format right now.
```
1,000,000 x mesh vertex: 530 ms -> 130 ms
1,000,000 x simple cube: 1290 ms -> 190 ms
1,000,000 x point: 1000 ms -> 150 ms
1,000,000 x curve spiral: 1740 ms -> 330 ms
1,000,000 x curve line: 1110 ms -> 210 ms
10,000 x subdivided cylinder: 170 ms -> 40 ms
10 x subdivided spiral: 180 ms -> 180 ms
```
Differential Revision: https://developer.blender.org/D13446
|
|
I assume this `butr` rectangle was used more in the past,
but currently its value is set and used less than 10 lines apart,
so it's trivial to remove 16 bytes from every node. The other
rectangles are also runtime data and could be removed, but
they are more difficult.
|
|
|
|
Replace compare floats node with a generalized compare node. The node
allows for the comparison of float, int, string, color, and vector.
The datatypes support the following operators:
Float, Int: <, >, <=, >=, ==, !=
String: ==, !=
Color: ==, !=, lighter, darker
(using rgb_to_grayscale value as the brightness value)
Vector Supports 5 comparison modes for: ==, !=, <, >, <=, >=
Average: The average of the components of the vectors are compared.
Dot Product: The dot product of the vectors are compared.
Direction: The angle between the vectors is compared to an angle
Element-wise: The individual components of the vectors are compared.
Length: The lengths of the vectors are compared.
Differential Revision: https://developer.blender.org/D13228
|
|
|
|
Currently, when creating a new node tree ID, its `typeinfo` is set to
`NodeTreeTypeUndefined`, but its `type` enum value is left to `0`,
aka `NTREE_SHADER`.
This patch adds a new `NTREE_UNDIFINED` value, and use it for
`NodeTreeTypeUndefined` types of node trees.
NOTE: While it is not clear whether that actually fixes issues currently,
quite a bit of code still relies on the value of `type`, so think it
makes sense to sanitize this.
NOTE: Would have been ideal to reserve `0` value to undefined type,
but at this point this is not possible anymore, so chose to use `-2` instead.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D13123
|
|
Previously, to get the declaration of a socket, one had to go
through `node->declaration`. Now this indirection is not necessary
anymore. This makes it easier to add more per-socket information
into the declaration and accessing it in various places.
Currently, this system is used by socket descriptions and node warnings
for unsupported geometry component types.
|
|
This is part of T92811.
Differential Revision: https://developer.blender.org/D13105
|
|
The viewer node has been expanded to have a field input next to the
geometry input. When both are connected (by ctrl+shift clicking on a node)
the spreadsheet will show the evaluated field on the geometry.
The operator to link to the viewer has become a bit smarter. It automatically
detects if it should link to the geometry or field input. In the future some more
smartness could be added, such as automatically relinking the "right" geometry
when viewing a field.
Internally, there are two major changes:
* Refactor of what happens when ctrl+shift clicking on a node to link to
a viewer. The behavior of the geometry nodes viewer is a bit more complex
than that of the compositor viewers. The behavior in compositing nodes
should not have changed. Any change should be reported as a bug (and then
we can decide if it's worse than before or if it needs fixing).
* Evaluation, display and caching of fields in the spreadsheet editor.
Differential Revision: https://developer.blender.org/D12938
|
|
This adds a new image texture node for geometry nodes. It does not
reuse the same node that is used in shading, because we want to be
able to expose the image and frame as sockets.
There is a known update issue when a movie or image sequence is
used. That will be fixed separately (also see D12957).
Currently, the image socket is just a pointer to an Image ID data block.
This can contain single images but also movies and image sequences.
In the future, the definition of an image socket can be expanded to
include images that are generated from scratch in the node tree.
For more details read the discussion in D12827.
Some of the code is a direct port from cycles and should be cleaned
up a bit in the future. For example `image_cubic_texture_lookup`.
For still images, the frame input is ignored. Otherwise, the frame
has to be in a valid range for the node to work. In the future we
may add e.g. automatic looping functionality.
Differential Revision: https://developer.blender.org/D12827
|
|
These nodes just output a single value of their respective types,
making it possible to control multiple inputs with the same value.
Differential Revision: https://developer.blender.org/D12932
|
|
|
|
This patch includes an updated version of the raycast node that uses
fields instead of attributes for inputs instead of outputs. This makes
the node's UI much clearer. It should be faster too, since the
evaluation system for fields provides multi-threading.
The source position replaces the input geometry (since this node is
evaluated in the context of a geometry like the other field nodes).
Thanks to @guitargeek for an initial version of this patch.
Differential Revision: https://developer.blender.org/D12638
|
|
Since points aren't relevant in function nodes, replace all mentions
of it with "local" to illustrate rotations done in local-space instead.
Differential Revision: https://developer.blender.org/D12881
|
|
This commit adds an updated version of the old attribute transfer node.
It works like a function node, so it works in the context of a
geometry, with a simple data output.
The "Nearest" mode finds the nearest element of the specified domain on
the target geometry and copies the value directly from the target input.
The "Nearest Face Interpolated" finds the nearest point on anywhere on
the surface of the target mesh and linearly interpolates the value on
the target from the face's corners.
The node also has a new "Index" mode, which can pick data from specific
indices on the target geometry. The implicit default is to do a simple
copy from the target geometry, but any indices could be used. It is also
possible to use a single value for the index to to retrieve a single
value from an attribute at a certain index.
Differential Revision: https://developer.blender.org/D12785
|
|
Adds a color input node with picker.
Differential Revision: https://developer.blender.org/D12793
|
|
There is not enough time before the release to improve Random Walk to handle
all cases this was used for, so restore it for now.
Since there is no more path splitting in cycles-x, this can increase noise in
non-flat areas for the sample number of samples, though fewer rays will be traced
also. This is fundamentally a trade-off we made in the new design and why Random
Walk is a better fit. However the importance resampling we do now does help to
reduce noise.
Differential Revision: https://developer.blender.org/D12800
|
|
This commit implements T91780, adding nodes to get and set builtin
attributes. Individual set nodes are used so that the values can be
exposed for direct editing, which is useful for attributes like shade
smooth and spline resolution. Individual input nodes are used to allow
reusing nodes for multiple components, and to allow grouping multiple
outputs conceptually in the same node in the future.
Input Nodes
- Radius
- Curve Tilt
- Curve Handle Positions
- Is Shade Smooth
- Spline Resolution
- Is Spline Cyclic
'Set' Nodes
- Curve Radius
- Point Radius
- Curve Tilt
- Curve Handle Positions
- Is Shade Smooth
- Spline Resolution
- Is Spline Cyclic
Using hardcoded categories is necessary to add separators to the node
menu.
Differential Revision: https://developer.blender.org/D12687
|
|
Delete Geometry:
This adds a copy of the old node in the legacy folder and updates the
node to work with fields. The invert option is removed, because it is
something that should be very easy with fields, and to be consistent
with other nodes which have a selection. There is also a dropdown to
select the domain, because the domain can't be determined from the
field input. When the domain does not belong on any of the components
an info message is displayed.
Separate Geometry:
A more general version of the old Point Separate node. The "inverted"
output is the same as using the delete geometry node.
Differential Revision: https://developer.blender.org/D12574
|
|
This commit introduces the Align Euler to Vector function node which
rotates to a body into a given direction. The node replaces the legacy
"Align Rotation to Vector" node, which only worked on an attribute
named `rotation` internally. The "Euler" in the name is meant to make
it clearer that the rotation isn't interchangeable with a regular
vector.
Addresses T91374.
Differential Revision: https://developer.blender.org/D12726
|
|
This makes the diff for adding a new version of the attribute transfer
node slightly smaller.
|
|
This commit introduces the Rotate Euler function node which modifies
an input euler rotation. The node replaces the "Point Rotate" node.
Addresses T91375.
Differential Revision: https://developer.blender.org/D12531
|
|
|
|
Add a fields-aware implementation of the attribute proximity node.
The Source position is an implicit position field, but can be
connected with a position input node with alterations before use.
The target input and mode function the same as the original node.
Patch by Johnny Matthews with edits from Hans Goudey (@HooglyBoogly).
Differential Revision: https://developer.blender.org/D12635
|
|
This commit adds nodes to do direct conversion between meshes and point
clouds in geometry nodes. The conversion from mesh to points is helpful
to instance once per face, or once per edge, which was previously only
possibly with ugly work-arounds. Fields can be evaluated on the mesh
to pass them to the points with the attribute capture node.
The other conversion, point cloud to mesh vertices, is a bit less
obvious, though it is still a common request from users. It's helpful
for flexibility when passing data around, better visualization in the
viewport (and in the future, cycles), and the simplicity of points.
This is a step towards T91754, where point clouds are currently
combined with meshes when outputing to the next modifier after geometry
nodes. Since we're removing the implicit behavior for realizing
instances, it feels natural to use an explicit node to convert points
to vertices too.
Differential Revision: https://developer.blender.org/D12657
|
|
Change the toggle to switch between an attribute and a single value to
only display for inputs that are fields, as determined statically by
the field inferencing added in rB61f3d4eb7c7db7. This means the field
inferencing must be calculated on file load, since it's used in the UI.
Differential Revision: https://developer.blender.org/D12623
|
|
This patch allows passing a field to the modifier as output. In the
modifier, the user can choose an attribute name. The attribute
will be filled with values computed by the field. This only works
for realized mesh/curve/point data. As mentioned in T91376, the
output domain is selected in the node group itself. We might want
to add this functionality to the modifier later as well, but not now.
Differential Revision: https://developer.blender.org/D12644
|
|
This node replaces the deprecated Attribute Randomize node, populating
a vector, float, integer or boolean field with random values. Vector,
float, and integer have min/max settings, which are also field aware.
The boolean type has a probability value for controlling what portion
of the output should be true. All four types have a field seed input
which is implicitly driven by the index, otherwise, all values would
be the same "random" value.
The Random Float node is now deprecated like other nodes, since it is
redundant with this node.
Differential Revision: https://developer.blender.org/D12603
|
|
This commit adds a node that generates a text paragraph as curve
instances. The inputs on the node control the overall shape of the
paragraph, and other nodes can be used to move the individual instances
afterwards. To output more than one line, the "Special Characters" node
can be used.
The node outputs instances instead of real geometry so that it doesn't
have to duplicate work for every character afterwards. This is much
more efficient, because all of the curve evaluation and nodes like fill
curve don't have to repeat the same calculation for every instance of
the same character.
In the future, the instances component will support attributes, and the
node can output attribute fields like "Word Index" and "Line Index".
Differential Revision: https://developer.blender.org/D11522
|
|
This adds a replacement for the deprecated Point Distribute node.
Arguments for the name change can be found in T91155.
Descriptions of the sockets are available in D12536.
Thanks to Jarrett Johnson for the initial patch!
Differential Revision: https://developer.blender.org/D12536
|
|
This implements the update logic for the vizualization of which
sockets pass data or constants directly, and which pass functions.
The socket shapes may still have to be updated. That should be
done separately, because it might be a bit more involved, because
socket shapes are currently linked to keyframe shapes. Currently
the circle and diamond shapes are used with the following meanings:
- Input Sockets:
- Circle: Required to be a single value.
- Diamond: This input supports fields.
- Output Sockets:
- Circle: This output is a single value.
- Diamond: This output may be a field.
Connecting a field to a circle input socket is an error, since a
field cannot be converted to a single value. If the socket shape
is a diamond with a dot in the middle, it means it is currently
a single value, but could be a field.
In addition to socket shapes, the intention is to draw node links
differently based on the field status. However, the exact method for
conveying that isn't decided yet.
Differential Revision: https://developer.blender.org/D12584
|
|
This node can be used to fillet splines at control points to
create a circular arc.
The implementation roughly follows T89227's design.
The node works in two main modes: Bezier and Poly
* Bezier: Creates a circular arc at vertices by changing
handle lengths (applicable only for Bezier splines).
* Poly: Creates a circular arc by creating vertices (as
many as defined by the Count fields input) along
the arc (applicable for all spline types).
In both modes, the radius of the created arc is defined
by the Radius fields input.
The Limit Radius attribute can be enabled to prevent
overlapping when the defined radius exceeds the maximum
possible radius for a given point.
Reviewed By: Hans Goudey
Differential Revision: https://developer.blender.org/D12115
|
|
This includes much improved GPU rendering performance, viewport interactivity,
new shadow catcher, revamped sampling settings, subsurface scattering anisotropy,
new GPU volume sampling, improved PMJ sampling pattern, and more.
Some features have also been removed or changed, breaking backwards compatibility.
Including the removal of the OpenCL backend, for which alternatives are under
development.
Release notes and code docs:
https://wiki.blender.org/wiki/Reference/Release_Notes/3.0/Cycles
https://wiki.blender.org/wiki/Source/Render/Cycles
Credits:
* Sergey Sharybin
* Brecht Van Lommel
* Patrick Mours (OptiX backend)
* Christophe Hery (subsurface scattering anisotropy)
* William Leeson (PMJ sampling pattern)
* Alaska (various fixes and tweaks)
* Thomas Dinges (various fixes)
For the full commit history, see the cycles-x branch. This squashes together
all the changes since intermediate changes would often fail building or tests.
Ref T87839, T87837, T87836
Fixes T90734, T89353, T80267, T80267, T77185, T69800
|
|
This node allows sampling positions, tangents, and normals at any
arbitrary point along a curve. The curve can include multiple splines,
all are taken into account. The node does not yet support transferring
generic attributes like radius, because some more general tooling will
make that much more feasible and useful in different scenarios.
This is a field node, so it is evaluated in the context of a data-flow
node like "Set Position". One nice thing about that is it can easily
be used to move an entire geometry like the follow path constraint.
The point along the curve is chosen either with a factor of the total
length of the curve, or a length into the curve, the same choice used
in the curve trim node.
Differential Revision: https://developer.blender.org/D12565
|
|
Incorrect renaming and use of enum after search and replace.
|
|
|
|
It's equivalent to the OpenImageDenoise prefiltering option in Cycles.
See D12043.
Prefilter modes:
- None: No prefiltering, use when guiding passes are noise-free.
- Fast: Denoise image and guiding passes together. Improves quality when
guiding passes are noisy using least amount of extra processing time.
- Accurate: Prefilter noisy guiding passes before denoising image.
Improves quality when guiding passes are noisy using extra
processing time.
Reviewed By: #compositing, jbakker, sergey
Differential Revision: https://developer.blender.org/D12342
|
|
The enum called "interpolate" was really a choice of methods for mapping
inputs to positions on the curve, whereas the "sample" enum was used to
define a way to create a whole set of new points from the curve, without
any input parameters. The "re-sample" vs. "sample" naming makes that
distinction better.
|
|
Previously, it was necessary to rebuild the node declaration
every time it was used. Now it is cached per node for easy
and fast access.
For more details on what this is, look at the comment in
`DNA_node_types.h`.
Differential Revision: https://developer.blender.org/D12471
|