Age | Commit message (Collapse) | Author |
|
Differential Revision: https://developer.blender.org/D8660
This patch is the result of the GSoC 2020 "Editing Grease Pencil Strokes
Using Curves" project. It adds a submode to greasepencil edit mode that
allows for the transformation of greasepencil strokes using bezier
curves. More information about the project can be found
here: https://wiki.blender.org/wiki/User:Filedescriptor/GSoC_2020.
|
|
|
|
It was using the same flag as SCULPT_DYNTOPO_DETAIL_MANUAL
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9484
|
|
|
|
Corrects incorrect usage of contraction for 'it is', when possessive 'its' was required.
Differential Revision: https://developer.blender.org/D9250
Reviewed by Campbell Barton
|
|
This makes it easier to generate motion trail effect with EEVEE.
This just mimics the cycles option as described here:
https://docs.blender.org/manual/en/latest/render/cycles/render_settings/motion_blur.html
This fix T80070
|
|
Follow our code style guide by using C-comments for text descriptions.
|
|
The adds a new option to simplify volumes in the viewport.
The setting can be found in the Simplify panel in the render properties.
Volume objects use OpenVDB grids, which are sparse. For rendering,
we have to convert sparse grids to dense grids (for now). Those require
significantly more memory. Therefore, it's often a good idea to reduce
the resolution of volumes in the viewport.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D9040
Ref T73201.
|
|
Allows scripters to store additional information in the marker itself instead
of using work-around approach based on marker names and such.
Differential Revision: https://developer.blender.org/D8944
|
|
Based on the original patch by Vaishnav S (@padthai), this adds
support for temperature units. Initially supported units are Celsius,
Kelvin, and Fahrenheit.
The units aren't used anywhere with this commit. Those changes should
happen in separate patches by adding PROP_TEMPERATURE to RNA property
definitions. But it should be ensured that the various solvers and
simulations actually properly use real units.
The complexity of some of the changes comes from the fact that these
units have offsets from each other as well as coefficients. This also
makes the implementation in the current unit system troublesome.
For example, entering 0C evaluates correctly to 273K, but 0C + 0C
doubles that result, because each unit value is evaluated separately.
This is quite hard to solve in the general case with Blender's current
unit system, though, so it is not handled in this commit.
Differential Revision: https://developer.blender.org/D4401
|
|
Sometimes interpolate all frames is not convenient and it's better, for example, interpolate in twos.
The new parameter allows to define the number of frame for each step, by default is set to 1 as before.
{F8812621}
This is a request of animators to improve interpolate tools.
Reviewed By: mendio
Maniphest Tasks: T80190
Differential Revision: https://developer.blender.org/D8723
239b0b
|
|
This replaces header include guards with `#pragma once`.
A couple of include guards are not removed yet (e.g. `__RNA_TYPES_H__`),
because they are used in other places.
This patch has been generated by P1561 followed by `make format`.
Differential Revision: https://developer.blender.org/D8466
|
|
Keeping face attributes connected is now optional.
Keeping UV's connected is useful for organic modeling, but bad for
architectural.
Differential Revision: https://developer.blender.org/D8360
|
|
Support custom-data correction based on surrounding geometry for all
transformation modes of the mesh transform operators.
The is the same logic used in Vert and Edge Slide.
In order not to change the current default behavior,
this property does not affect Vert and Edge Slide modes.
|
|
Threaded Sculpt is now always enabled by default. If it causes
performance problems compared single threaded sculpt it should be
considered a bug.
Reviewed By: sergey
Maniphest Tasks: T77638
Differential Revision: https://developer.blender.org/D7960
|
|
This revisit the render pipeline to support time slicing for better motion
blur.
We support accumulation with or without the Post-process motion blur.
If using the post-process, we reuse last step next motion data to avoid
another scene reevaluation.
This also adds support for hair motion blur which is handled in a similar
way as mesh motion blur.
The total number of samples is distributed evenly accross all timesteps to
avoid sampling weighting issues. For this reason, the sample count is
(internally) rounded up to the next multiple of the step count.
Only FX Motion BLur: {F8632258}
FX Motion Blur + 4 time steps: {F8632260}
FX Motion Blur + 32 time steps: {F8632261}
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D8079
|
|
This adds object motion blur vectors for EEVEE as well as better noise
reduction for it.
For TAA reprojection we just compute the motion vector on the fly based on
camera motion and depth buffer. This makes possible to store another motion
vector only for the blurring which is not useful for TAA history fetching.
Motion Data is saved per object & per geometry if using deformation blur.
We support deformation motion blur by saving previous VBO and modifying the
actual GPUBatch for the geometry to include theses VBOs.
We store Previous and Next frame motion in the same motion vector buffer
(RG for prev and BA for next). This makes non linear motion blur (like
rotating objects) less prone to outward/inward blur.
We also improve the motion blur post process to expand outside the objects
border. We use a tile base approach and the max size of the blur is set via
a new render setting.
We use a background reconstruction method that needs another setting
(Background Separation).
Sampling is done using a fixed 8 dithered samples per direction. The final
render samples will clear the noise like other stochastic effects.
One caveat is that hair particles are not yet supported. Support will
come in another patch.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7297
|
|
Mix up with imapaint.paintcursor & imapaint.paint.paint_cursor
Remove imapaint.paintcursor since it wasn't used.
Also rename paint_cursor_start_explicit() to paint_cursor_start(),
removing the existing paint_cursor_start() since it took the paint
struct from the context, a value that's known by all callers.
|
|
The previous naming scheme for the "selected to active" baking options
lead to confusion and they were not describing what they actually did.
To remedy this, I've added a new settings that does what the older setting implied it did.
Reviewed By: Brecht, Dalai, Andy Davies
Differential Revision: http://developer.blender.org/D7733
|
|
Conflicts:
release/scripts/startup/bl_ui/properties_render.py
source/blender/blenkernel/BKE_blender_version.h
|
|
This parameter allows to define the threshold for SMAA algorithm.
Differential Revision: https://developer.blender.org/D7708
|
|
Surrounding includes with an 'extern "C"' block is not necessary anymore.
Also that made it harder to add any C++ code to some headers, or include headers
that have "optional" C++ code like `MEM_guardedalloc.h`.
I tested compilation on linux and windows (and got help from @LazyDodo).
If this still breaks compilation due to some linker error, the header containing
the symbol in question is probably missing an 'extern "C"' block.
Differential Revision: https://developer.blender.org/D7653
|
|
Avoids accidents when adding/removing items from an enum.
|
|
In Blender 2.81 we update and draw all nodes inside the view planes.
When navigating with a pen tablet after an operation that tags the whole
mesh to update (like undo or inverting the mask), this introduces some
lag as nodes are updating when they enter the view. The viewport is not
fully responsive again until all nodes have entered the view after the
operation.
This commit delays nodes updates until the view navigation stops, so the
viewport navigation is always fully responsive. This introduces some
artifacts while navigating, so it can be disabled if you don't want to
see them.
I'm storing the update planes in the PBVH. This way I can add support
for some tools to update in real-time only the nodes inside this plane
while running the operator, like the mesh filter.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6269
|
|
This adds the automasking options to the Sculpt Tool options in a way
that they affect all brushes. This is more convenient when working with
some of these options while switching brushes as they don't need to be
enabled/disabled per brush.
An automasking option is enabled if it is enabled in the brush or in the
sculpt options.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7304
|
|
It appears this slipped through the code review
Reviewed By: sebbas
Differential Revision: https://developer.blender.org/D6760
|
|
|
|
This check box alters how weights are displayed and painted,
similar to Multi Paint, but in a different way. Specifically,
weights are presented as if all locked vertex groups were
deleted, and the remaining deform groups normalized.
The new feature is intended for use when balancing weights within
a group of bones while all others are locked. Enabling the option
presents weight as if the locked bones didn't exist, and their
weight was proportionally redistributed to the editable bones.
Conversely, the Multi-Paint feature allows balancing a group of
bones as a whole against all unselected bones, while ignoring
weight distribution within the selected group.
This mode also allows temporarily viewing non-normalized weights
as if they were normalized, without actually changing the values.
Differential Revision: https://developer.blender.org/D3837
|
|
We implement cubemap array support for EEVEE's lightcache reflection probes.
This removes stretched texels and bottom hemisphere seams artifacts caused
by the octahedral projection previously used.
This introduce versioning code for the lightcache which will discard any
lightcache version that is not compatible.
Differential Revision: https://developer.blender.org/D7066
|
|
|
|
This commit is a full refactor of the grease pencil modules including Draw Engine, Modifiers, VFX, depsgraph update, improvements in operators and conversion of Sculpt and Weight paint tools to real brushes.
Also, a huge code cleanup has been done at all levels.
Thanks to @fclem for his work and yo @pepeland and @mendio for the testing and help in the development.
Differential Revision: https://developer.blender.org/D6293
|
|
Face Sets are the new system to control the visibility state of the mesh in sculpt and paint modes. They are designed to work in modes where brushes are the primary way of interaction and they provide much more control when working with meshes with complex shapes and overlapping surfaces.
This initial commit includes:
- Sculpt Face Sets data structures and PBVH rendering.
- Face Set overlay and opacity controls.
- Sculpt Undo support.
- Remesher reprojection support. The visibility state of the mesh is also preserved when remeshing.
- Automasking and Mesh filter support.
- Mask expand operator mode to expand Face Sets (Shift + W) and flood fill areas by connectivity (press Ctrl while expanding).
- Sculpt Mode Face Sets and Visibility API.
- Sculpt Face Sets creation and visibility management operators.
- Operator to randomize the Face Sets colors.
- Draw Face Sets brush tool to create and edit the Face Sets. Drawing on the mesh creates a new Face Set. Pressing Ctrl before drawing modifies the Face Set under the brush at the beginning of the stroke.
- Updated keymap and menu to work with Face Sets from Sculpt Mode (H to toggle visibility, Alt + H to show all, Shit + H to hide).
- Pie menu on the W key with Face common Sets operations.
Know limitations:
- Multires support. The Face Sets and Visibility API needs to be implemented for Multires.
Reviewed By: jbakker, #user_interface, Severin
Differential Revision: https://developer.blender.org/D6070
|
|
|
|
This patch adds new render passes to EEVEE. These passes include:
* Emission
* Diffuse Light
* Diffuse Color
* Glossy Light
* Glossy Color
* Environment
* Volume Scattering
* Volume Transmission
* Bloom
* Shadow
With these passes it will be possible to use EEVEE effectively for
compositing. During development we kept a close eye on how to get similar
results compared to cycles render passes there are some differences that
are related to how EEVEE works. For EEVEE we combined the passes to
`Diffuse` and `Specular`. There are no transmittance or sss passes anymore.
Cycles will be changed accordingly.
Cycles volume transmittance is added to multiple surface col passes. For
EEVEE we left the volume transmittance as a separate pass.
Known Limitations
* All materials that use alpha blending will not be rendered in the render
passes. Other transparency modes are supported.
* More GPU memory is required to store the render passes. When rendering
a HD image with all render passes enabled at max extra 570MB GPU memory is
required.
Implementation Details
An overview of render passes have been described in
https://wiki.blender.org/wiki/Source/Render/EEVEE/RenderPasses
Future Developments
* In this implementation the materials are re-rendered for Diffuse/Glossy
and Emission passes. We could use multi target rendering to improve the
render speed.
* Other passes can be added later
* Don't render material based passes when only requesting AO or Shadow.
* Add more passes to the system. These could include Cryptomatte, AOV's, Vector,
ObjectID, MaterialID, UV.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D6331
|
|
|
|
This patch adds a dedicated path to extract 16bit normals instead of packing them into 10bits/comp.
The tangents are also packed to 10bits/comp if not using the new High Quality Normal option.
Fix T61024 Degraded texture shading on dense meshes
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6614
|
|
|
|
|
|
This allows for more flexibility in Compositing compared to the
hardcoded alpha-over that is currently used.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6829
|
|
Liblink specific ID type function was so far running a loop over all IDs
of relevant type, unlike almost any other 'ID-callback-like' functions
in Blender, which usually let the looping controll to calling code.
The latter approach is more convinient when one want to add generic
(i.e. type-agnostic) code, since it typically only has to change code in
one place (caller function) instead of tens of places (all the callback
functions).
This commit also changes/sanitizes a few things that had nothing to do
in main liblink code, like mesh conversion from tessfaces to polys
(which can be done in after-linking versionning code), or scenes' cycles
detection/check regarding background 'set' scenes.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6727
|
|
Technically, pointers are to be padded with followup pointer.
|
|
Also remove dead code which checked for SPACE_TIME.
|
|
Some other areas in the brush code outside sculpt mode assume that
pressure is multiplied directly on top of the initial size. This patch
calculates the pixel radius correctly using the brush size from sculpt
mode to get the dyntopo detail size.
When the new brush input system is in place, all these values will come
directly from the brush input code with all the custom curves applied
per brush, so all paint modes will have a correct brush behavior and all
this sculpt mode specific code won't be necessary.
Reviewed By: jbakker
Maniphest Tasks: T72092
Differential Revision: https://developer.blender.org/D6339
|
|
Implement T66304 as an experimental option,
available under the preferences "Experimental" section.
- When enabled most tools in the 3D view have a gizmo.
- Dragging outside the gizmo uses the 'fallback' tool.
- The fallback tool can be changed or disabled in the tool options
or from a pie menu (Alt-W).
|
|
The relation between the pressure/size and the pressure/alpha is a
fundamental property that defines the behavior of a brush, so it does
not make sense to have it unified across all brushes. This applies both
for sculpting and painting.
Some of the new 2.82 brushes need pressure/size or pressure/alpha to be
enabled to work propely, while others don't. Users should not be
switching on and off this property manually when changing brushes if they
want to use unified size. This is also causing that some users are using
the brushes with an incorrect configuration.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6291
|
|
When doing viewport rendering the color management happens on the CPU.
This has overhead in downloading a float texture from the gpu and
performing color management on the CPU.
Based on the scene fileformat bit depth the result will be rendered to
a byte texture where the colormanagement happens on the GPU or a float
texture where the colormanagement happens on the CPU.
This is only done during `Viewport Render Animation` in other
cases a float texture is being used.
Baseline (HD render of wanderer.blend workbench engine no samples) 15.688038 s
After changes: 9.412880s
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6195
|
|
Also correct some outdated symbol references,
add missing 'name' commands.
|
|
Custom profiles in bevel allows the profile curve to be controlled by
manually placed control points. Orientation is regularized along
groups of edges, and the 'pipe case' is updated. This commit includes
many updates to comments and changed variable names as well.
A 'cutoff' vertex mesh method is added to bevel in addition to the
existing grid fill option for replacing vertices.
The UI of the bevel modifier and tool are updated and unified.
Also, a 'CurveProfile' widget is added to BKE for defining the profile
in the interface, which may be useful in other situations.
Many thanks to Howard, my mentor for this GSoC project.
Reviewers: howardt, campbellbarton
Differential Revision: https://developer.blender.org/D5516
|
|
Add new `Backface Culling` option to the snapping properties.
This option has nothing to do with the view3d display or the
workbench `Backface Culling` option.
Limitation:
- In edit mode, this option only affects snap to faces.
Maniphest Tasks: T71217
Differential Revision: https://developer.blender.org/D6155
|
|
|