Age | Commit message (Collapse) | Author |
|
Add mode to overwrite strips on overlap instead of resolving overlap.
When overlap is created, 3 things can happen:
- On partial overlap, handles of overlapped strip are moved
- On complete overlap with smaller strip, overlapped strip is split
- On complete overlap with larger strip, overlapped strip is removed
This mode can be enabled in header.
Reviewed By: fsiddi, mano-wii
Differential Revision: https://developer.blender.org/D11805
|
|
These should have been removed earlier but were forgotten.
|
|
|
|
Previously, this option was not exposed in the UI, only for the clip editor.
There were also multiple rna properties that did the same thing for each of the 2D editors.
There was also an issue where the property enum items were the same as the 3d view which didnt make much sense.
Reviewed By: antoniov
Differential Revision: https://developer.blender.org/D12027
|
|
|
|
Use "Snap Playhead to Strips" option to enable playhead snapping.
Change behavior of CTRL key to invert snapping similar to transform operator.
Currently this option is disabled by default. It makes editing quite unpleasant
for me personally, but ideally I should gather feedback from more users.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D11745
|
|
Also use doxy style function reference `#` prefix chars when
referencing identifiers.
|
|
|
|
Change snapping behavior to snap strip edges when they are close to snap point.
Default behavior is, that each transformed strip is snapped to any other strip.
Implement snapping controls in sequencer tool settings. These controls include:
- Snapping on/off
- Ability to snap to playhead and strip hold offset points
- Filter snap points by excluding sound or muted strips
- Control snapping distance
Snapping controls are placed in timeline header similar to 3D viewport
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11646
|
|
|
|
|
|
|
|
|
|
Following with the changes included to interpolate strokes of different number of points, a full review has been done in the interpolation tools.
* Interpolate now is a tool and not an operator. It was not logic to have this tool as a button.
* Interpolate tool parameters have been moved to topbar.
* Interpolate popover has been removed from topbar and interpolate `Sequence` operator has been moved to grease pencil menu.
* Interpolate Sequence now include a Redo panel.
* Interpolate tool now allows to select the strokes by pairs. This allows to interpolate any stroke with any stroke and not as before that it was only possible by drawing order. If no stroke is selected, the interpolation is done as before.
* Now is possible interpolate again if a previous keyframe exist. Before, it was impossible to interpolate two times in same frame and this made impossible to do the interpolation by groups of frames.
* New automatic option to `Flip strokes` if the stroke and end are not in the right position. Also the flip can be set manually for corner cases.
* Cleanup of menus related to interpolate.
* Fixed some bugs and removed parameters from scene because now all are tool or operator contained.
* Some code cleanup and function renames.
This commit also includes the some codebase to future implementation of the concept `Vertex Active` that now does not exist in grease pencil.
|
|
|
|
|
|
This is a complete refactor over the old system. The goal was to increase quality
first and then have something more flexible and optimised.
|{F9603145} | {F9603142}|{F9603147}|
This fixes issues we had with the old system which were:
- Too much overdraw (low performance).
- Not enough precision in render targets (hugly color banding/drifting).
- Poor resolution near in-focus regions.
- Wrong support of orthographic views.
- Missing alpha support in viewport.
- Missing bokeh shape inversion on foreground field.
- Issues on some GPUs. (see T72489) (But I'm sure this one will have other issues as well heh...)
- Fix T81092
I chose Unreal's Diaphragm DOF as a reference / goal implementation.
It is well described in the presentation "A Life of a Bokeh" by Guillaume Abadie.
You can check about it here https://epicgames.ent.box.com/s/s86j70iamxvsuu6j35pilypficznec04
Along side the main implementation we provide a way to increase the quality by jittering the
camera position for each sample (the ones specified under the Sampling tab).
The jittering is dividing the actual post processing dof radius so that it fills the undersampling.
The user can still add more overblur to have a noiseless image, but reducing bokeh shape sharpness.
Effect of overblur (left without, right with):
| {F9603122} | {F9603123}|
The actual implementation differs a bit:
- Foreground gather implementation uses the same "ring binning" accumulator as background
but uses a custom occlusion method. This gives the problem of inflating the foreground elements
when they are over background or in-focus regions.
This is was a hard decision but this was preferable to the other method that was giving poor
opacity masks for foreground and had other more noticeable issues. Do note it is possible
to improve this part in the future if a better alternative is found.
- Use occlusion texture for foreground. Presentation says it wasn't really needed for them.
- The TAA stabilisation pass is replace by a simple neighborhood clamping at the reduce copy
stage for simplicity.
- We don't do a brute-force in-focus separate gather pass. Instead we just do the brute force
pass during resolve. Using the separate pass could be a future optimization if needed but
might give less precise results.
- We don't use compute shaders at all so shader branching might not be optimal. But performance
is still way better than our previous implementation.
- We mainly rely on density change to fix all undersampling issues even for foreground (which
is something the reference implementation is not doing strangely).
Remaining issues (not considered blocking for me):
- Slight defocus stability: Due to slight defocus bruteforce gather using the bare scene color,
highlights are dilated and make convergence quite slow or imposible when using jittered DOF
(or gives )
- ~~Slight defocus inflating: There seems to be a 1px inflation discontinuity of the slight focus
convolution compared to the half resolution. This is not really noticeable if using jittered
camera.~~ Fixed
- Foreground occlusion approximation is a bit glitchy and gives incorrect result if the
a defocus foreground element overlaps a farther foreground element. Note that this is easily
mitigated using the jittered camera position.
|{F9603114}|{F9603115}|{F9603116}|
- Foreground is inflating, not revealing background. However this avoids some other bugs too
as discussed previously. Also mitigated with jittered camera position.
|{F9603130}|{F9603129}|
- Sensor vertical fit is still broken (does not match cycles).
- Scattred bokeh shapes can be a bit strange at polygon vertices. This is due to the distance field
stored in the Bokeh LUT which is not rounded at the edges. This is barely noticeable if the
shape does not rotate.
- ~~Sampling pattern of the jittered camera position is suboptimal. Could try something like hammersley
or poisson disc distribution.~~Used hexaweb sampling pattern which is not random but has better
stability and overall coverage.
- Very large bokeh (> 300 px) can exhibit undersampling artifact in gather pass and quite a bit of
bleeding. But at this size it is preferable to use jittered camera position.
Codewise the changes are pretty much self contained and each pass are well documented.
However the whole pipeline is quite complex to understand from bird's-eye view.
Notes:
- There is the possibility of using arbitrary bokeh texture with this implementation.
However implementation is a bit involved.
- Gathering max sample count is hardcoded to avoid to deal with shader variations. The actual
max sample count is already quite high but samples are not evenly distributed due to the
ring binning method.
- While this implementation does not need 32bit/channel textures to render correctly it does use
many other textures so actual VRAM usage is higher than previous method for viewport but less
for render. Textures are reused to avoid many allocations.
- Bokeh LUT computation is fast and done for each redraw because it can be animated. Also the
texture can be shared with other viewport with different camera settings.
|
|
In the Bake > Output panel, there is now a choice between Image Textures and
Vertex Colors. The active vertex color layer is used for baking. This works
with both existing per-corner and sculpt per-vertex vertex colors.
|
|
This commit resolves problem introduced in e1665c3d3190 - it was
difficult to import media at their original resolution.
This is done by using original resolution as reference for scale.
All crop and strip transform values and their animation is converted
form old files.
To make both workflows easy to use, sequencer tool settings have been
created with preset for preffered scaling method. This setting is in
sequencer timeline header and add image or movie strip operator
properties.
Two new operators have been added:
`sequencer.strip_transform_fit` operator with 3 options: Scale To Fit,
Scale to Fill and Stretch To Fill.
Operator can fail if strip image or video is not loaded currently, this
case should be either sanitized or data loaded on demand.
`sequencer.strip_transform_clear` operator with 4 options:
Clear position, scale, rotation and all (previous 3 options combined).
Reviewed By: sergey, fsiddi
Differential Revision: https://developer.blender.org/D9582
|
|
|
|
Remove DNA headers, using forward declarations where possible.
Also removed duplicate header, header including it's self
and unnecessary inclusion of libc system headers from BKE header.
|
|
In Cycles the volume transmittance is already composited into the color
passes. In Eevee the volume transmittance pass was separate and needed
to be composited in the compositor. This patch adds the volume
transmittance pass direct in the next render passes:
* Diffuse Color
* Specular Color
* Emission
* Environment
This patch includes the removal of the volume transmittance render pass.
It also renames the volume render passes to match Cycles. The setting
themselves aren't unified.
Maniphest Tasks: T81134
|
|
This option joins any stroke with an end near the actual stroke. Now it is not limited to the last stroke, any stroke in the same layer for the actual frame can be joined. The join can join two strokes drawing a third stroke.
If the end and the start of the result stroke are very small, the stroke is changed to be cyclic automatically.
There is a limit distance to join the stroke, if the distance is greater than this value, the strokes are not joined. Actually, a constant, threshold distance is used, but we could expose
as a parameter in the UI in the future.
The tool can be used with freehand drawing or with primitives.
Note: Great part of the patch is just a refactor of the old code to make it accessible and to keep code organized.
Reviewed By: mendio
Maniphest Tasks: T82377
Differential Revision: https://developer.blender.org/D9440
|
|
Differential Revision: https://developer.blender.org/D8660
This patch is the result of the GSoC 2020 "Editing Grease Pencil Strokes
Using Curves" project. It adds a submode to greasepencil edit mode that
allows for the transformation of greasepencil strokes using bezier
curves. More information about the project can be found
here: https://wiki.blender.org/wiki/User:Filedescriptor/GSoC_2020.
|
|
|
|
It was using the same flag as SCULPT_DYNTOPO_DETAIL_MANUAL
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9484
|
|
|
|
Corrects incorrect usage of contraction for 'it is', when possessive 'its' was required.
Differential Revision: https://developer.blender.org/D9250
Reviewed by Campbell Barton
|
|
This makes it easier to generate motion trail effect with EEVEE.
This just mimics the cycles option as described here:
https://docs.blender.org/manual/en/latest/render/cycles/render_settings/motion_blur.html
This fix T80070
|
|
Follow our code style guide by using C-comments for text descriptions.
|
|
The adds a new option to simplify volumes in the viewport.
The setting can be found in the Simplify panel in the render properties.
Volume objects use OpenVDB grids, which are sparse. For rendering,
we have to convert sparse grids to dense grids (for now). Those require
significantly more memory. Therefore, it's often a good idea to reduce
the resolution of volumes in the viewport.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D9040
Ref T73201.
|
|
Allows scripters to store additional information in the marker itself instead
of using work-around approach based on marker names and such.
Differential Revision: https://developer.blender.org/D8944
|
|
Based on the original patch by Vaishnav S (@padthai), this adds
support for temperature units. Initially supported units are Celsius,
Kelvin, and Fahrenheit.
The units aren't used anywhere with this commit. Those changes should
happen in separate patches by adding PROP_TEMPERATURE to RNA property
definitions. But it should be ensured that the various solvers and
simulations actually properly use real units.
The complexity of some of the changes comes from the fact that these
units have offsets from each other as well as coefficients. This also
makes the implementation in the current unit system troublesome.
For example, entering 0C evaluates correctly to 273K, but 0C + 0C
doubles that result, because each unit value is evaluated separately.
This is quite hard to solve in the general case with Blender's current
unit system, though, so it is not handled in this commit.
Differential Revision: https://developer.blender.org/D4401
|
|
Sometimes interpolate all frames is not convenient and it's better, for example, interpolate in twos.
The new parameter allows to define the number of frame for each step, by default is set to 1 as before.
{F8812621}
This is a request of animators to improve interpolate tools.
Reviewed By: mendio
Maniphest Tasks: T80190
Differential Revision: https://developer.blender.org/D8723
239b0b
|
|
This replaces header include guards with `#pragma once`.
A couple of include guards are not removed yet (e.g. `__RNA_TYPES_H__`),
because they are used in other places.
This patch has been generated by P1561 followed by `make format`.
Differential Revision: https://developer.blender.org/D8466
|
|
Keeping face attributes connected is now optional.
Keeping UV's connected is useful for organic modeling, but bad for
architectural.
Differential Revision: https://developer.blender.org/D8360
|
|
Support custom-data correction based on surrounding geometry for all
transformation modes of the mesh transform operators.
The is the same logic used in Vert and Edge Slide.
In order not to change the current default behavior,
this property does not affect Vert and Edge Slide modes.
|
|
Threaded Sculpt is now always enabled by default. If it causes
performance problems compared single threaded sculpt it should be
considered a bug.
Reviewed By: sergey
Maniphest Tasks: T77638
Differential Revision: https://developer.blender.org/D7960
|
|
This revisit the render pipeline to support time slicing for better motion
blur.
We support accumulation with or without the Post-process motion blur.
If using the post-process, we reuse last step next motion data to avoid
another scene reevaluation.
This also adds support for hair motion blur which is handled in a similar
way as mesh motion blur.
The total number of samples is distributed evenly accross all timesteps to
avoid sampling weighting issues. For this reason, the sample count is
(internally) rounded up to the next multiple of the step count.
Only FX Motion BLur: {F8632258}
FX Motion Blur + 4 time steps: {F8632260}
FX Motion Blur + 32 time steps: {F8632261}
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D8079
|
|
This adds object motion blur vectors for EEVEE as well as better noise
reduction for it.
For TAA reprojection we just compute the motion vector on the fly based on
camera motion and depth buffer. This makes possible to store another motion
vector only for the blurring which is not useful for TAA history fetching.
Motion Data is saved per object & per geometry if using deformation blur.
We support deformation motion blur by saving previous VBO and modifying the
actual GPUBatch for the geometry to include theses VBOs.
We store Previous and Next frame motion in the same motion vector buffer
(RG for prev and BA for next). This makes non linear motion blur (like
rotating objects) less prone to outward/inward blur.
We also improve the motion blur post process to expand outside the objects
border. We use a tile base approach and the max size of the blur is set via
a new render setting.
We use a background reconstruction method that needs another setting
(Background Separation).
Sampling is done using a fixed 8 dithered samples per direction. The final
render samples will clear the noise like other stochastic effects.
One caveat is that hair particles are not yet supported. Support will
come in another patch.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7297
|
|
Mix up with imapaint.paintcursor & imapaint.paint.paint_cursor
Remove imapaint.paintcursor since it wasn't used.
Also rename paint_cursor_start_explicit() to paint_cursor_start(),
removing the existing paint_cursor_start() since it took the paint
struct from the context, a value that's known by all callers.
|
|
The previous naming scheme for the "selected to active" baking options
lead to confusion and they were not describing what they actually did.
To remedy this, I've added a new settings that does what the older setting implied it did.
Reviewed By: Brecht, Dalai, Andy Davies
Differential Revision: http://developer.blender.org/D7733
|
|
Conflicts:
release/scripts/startup/bl_ui/properties_render.py
source/blender/blenkernel/BKE_blender_version.h
|
|
This parameter allows to define the threshold for SMAA algorithm.
Differential Revision: https://developer.blender.org/D7708
|
|
Surrounding includes with an 'extern "C"' block is not necessary anymore.
Also that made it harder to add any C++ code to some headers, or include headers
that have "optional" C++ code like `MEM_guardedalloc.h`.
I tested compilation on linux and windows (and got help from @LazyDodo).
If this still breaks compilation due to some linker error, the header containing
the symbol in question is probably missing an 'extern "C"' block.
Differential Revision: https://developer.blender.org/D7653
|
|
Avoids accidents when adding/removing items from an enum.
|
|
In Blender 2.81 we update and draw all nodes inside the view planes.
When navigating with a pen tablet after an operation that tags the whole
mesh to update (like undo or inverting the mask), this introduces some
lag as nodes are updating when they enter the view. The viewport is not
fully responsive again until all nodes have entered the view after the
operation.
This commit delays nodes updates until the view navigation stops, so the
viewport navigation is always fully responsive. This introduces some
artifacts while navigating, so it can be disabled if you don't want to
see them.
I'm storing the update planes in the PBVH. This way I can add support
for some tools to update in real-time only the nodes inside this plane
while running the operator, like the mesh filter.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6269
|
|
This adds the automasking options to the Sculpt Tool options in a way
that they affect all brushes. This is more convenient when working with
some of these options while switching brushes as they don't need to be
enabled/disabled per brush.
An automasking option is enabled if it is enabled in the brush or in the
sculpt options.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7304
|
|
It appears this slipped through the code review
Reviewed By: sebbas
Differential Revision: https://developer.blender.org/D6760
|
|
|