Age | Commit message (Collapse) | Author |
|
This is still a bit basic but will be enhance in the future.
|
|
This also add partial probe update per type (only update cubemap if needed)
but it seems to be broken by some double update tagging in the depsgraph.
|
|
# Conflicts:
# source/blender/draw/engines/eevee/eevee_lightprobes.c
|
|
In this mode mesh detail does not change on each stroke, but only when
using flood fill.
Differential Revision: https://developer.blender.org/D3515
|
|
This patch does a few things for it to work.
- It port some eevee's struct to DNA for them to be saved in the file.
- Readback the result of the lightcache baking and store it in the scene
struct.
For small scenes, it's okayish to keep the data around in memory but a
better approach would be to save it to disk.
A standard reflection probe is more than 6 MB of data.
Diffuse irradiance grids are relatively small compared to this.
|
|
# Conflicts:
# source/blender/draw/engines/eevee/eevee_render.c
|
|
|
|
# Conflicts:
# source/blender/blenloader/intern/versioning_280.c
|
|
For the moment we use a per scene setting for that. We could move it to be
per viewport (as an overlay).
|
|
|
|
|
|
Design from T55246 is kept while allowing 2.7x behavior.
|
|
# Conflicts:
# source/blender/blenloader/intern/readblenentry.c
|
|
|
|
|
|
Also integrate it into the undo system and the depsgraph.
Green light means no cache, red means a baked light cache is used.
|
|
The ClayEngine was introduced to test the blender2.8 architecture during
development. As currently we have the wanted features implemented with
matcaps we are going to remove the clay engine as it was never intended
to be an official releasable engine
Note: The test cases are never run. But when enabled will be skipped as
they were implemented over the Clay Engine
|
|
|
|
- Uses the roughness setting of the basic eevee material
- renamed gloss_mir to roughness
- set default of roughness to 0.25
- renamed ray_mirror to metallic
- cleaned up material rna (BI mirror struct)
- use BLINN phong model
- normalize incoming/outgoing specular light
- when using camera oriented studiolight, the SolidLight will be used
for specular highlights
- EXPERIMENT: when in world oriented studiolight only the shadow direction will be used.
- change the settings of the internal light to make scenes more
readable
|
|
Added specular highlights for:
- Solid studio shading
- Texture studio shading
|
|
Hair Particles shape properties are ported from cycles. Thoses properties
have the same defaults and have a do_version of their own. Cycles will use
theses properties instead of its custom ones.
Some realtime engine specific settings are also added to scene->r because
it's much easier to control as global values.
Bumping Version number so cycles can do its own do_version on top of the
default settings.
|
|
|
|
|
|
Allows more than one snap mode to be enabled. So different combinations are possible.
Reviewers: campbellbarton
Reviewed By: campbellbarton
Subscribers: Christopher_Anderssarian, duarteframos
Tags: #bf_blender_2.8
Differential Revision: D3400
|
|
OVERVIEW
* In 2.7 terminology, all layers and groups are now collection datablocks.
* These collections are nestable, linkable, instanceable, overrideable, ..
which opens up new ways to set up scenes and link + override data.
* Viewport/render visibility and selectability are now a part of the collection
and shared across all view layers and linkable.
* View layers define which subset of the scene collection hierarchy is excluded
for each. For many workflows one view layer can be used, these are more of an
advanced feature now.
OUTLINER
* The outliner now has a "View Layer" display mode instead of "Collections",
which can display the collections and/or objects in the view layer.
* In this display mode, collections can be excluded with the right click menu.
These will then be greyed out and their objects will be excluded.
* To view collections not linked to any scene, the "Blender File" display mode
can be used, with the new filtering option to just see Colleciton datablocks.
* The outliner right click menus for collections and objects were reorganized.
* Drag and drop still needs to be improved. Like before, dragging the icon or
text gives different results, we'll unify this later.
LINKING AND OVERRIDES
* Collections can now be linked into the scene without creating an instance,
with the link/append operator or from the collections view in the outliner.
* Collections can get static overrides with the right click menu in the outliner,
but this is rather unreliable and not clearly communicated at the moment.
* We still need to improve the make override operator to turn collection instances
into collections with overrides directly in the scene.
PERFORMANCE
* We tried to make performance not worse than before and improve it in some
cases. The main thing that's still a bit slower is multiple scenes, we have to
change the layer syncing to only updated affected scenes.
* Collections keep a list of their parent collections for faster incremental
updates in syncing and caching.
* View layer bases are now in a object -> base hash to avoid quadratic time
lookups internally and in API functions like visible_get().
VERSIONING
* Compatibility with 2.7 files should be improved due to the new visibility
controls. Of course users may not want to set up their scenes differently
now to avoid having separate layers and groups.
* Compatibility with 2.8 is mostly there, and was tested on Eevee demo and Hero
files. There's a few things which are know to be not quite compatible, like
nested layer collections inside groups.
* The versioning code for 2.8 files is quite complicated, and isolated behind
#ifdef so it can be removed at the end of the release cycle.
KNOWN ISSUES
* The G-key group operators in the 3D viewport were left mostly as is, they
need to be modified still to fit better.
* Same for the groups panel in the object properties. This needs to be updated
still, or perhaps replaced by something better.
* Collections must all have a unique name. Less restrictive namespacing is to
be done later, we'll have to see how important this is as all objects within
the collections must also have a unique name anyway.
* Full scene copy and delete scene are exactly doing the right thing yet.
Differential Revision: https://developer.blender.org/D3383
https://code.blender.org/2018/05/collections-and-groups/
|
|
|
|
Per collection overrides are gone now.
|
|
We handle doversion for the scene properties, but not for the
view layer overrides.
Overrides will be implemented in a different way via dynamic overrides.
For now this data is completely lost.
|
|
|
|
Pivot variables are now stored in scene toolsettings.
|
|
Bone selection overlay is only available in pose mode.
and when active overrules the selection buffer.
This is currently `tricked` by switching the draw engines, but this is
an exception. Not sure how to solve this in a better way.
After this is solved we can look at how to localize the dim effect to only the objects connected to the active armatures. Currently it dims the whole screen (including background).
@campbellbarton I added you as reviewer as it you have done a lot in the DRW_draw_select_loop
Reviewers: campbellbarton, fclem
Reviewed By: fclem
Subscribers: campbellbarton
Tags: #bf_blender_2.8, #code_quest
Maniphest Tasks: T54983
Differential Revision: https://developer.blender.org/D3241
|
|
in Scene DNA is available in scene.display New DNA Struct DisplayData
Added RNA (scene.display).
We already have scene.display_settings which contains non viewpoert
specific color management settings. I did not merge those two.
Patch should be in line with the ideas that @brecht wrote in T55008.
As I am not in detail aware of the decisions that have been made for the override feature I want a short review if it is in line with the plans.
Reviewers: brecht, dfelinto
Reviewed By: brecht
Subscribers: brecht
Tags: #code_quest, #bf_blender_2.8
Differential Revision: https://developer.blender.org/D3290
|
|
This feature is limited (only byte PPM output, no multi-view),
only works with specific configurations.
This also causes some maintenance overhead
when testing changes to the render pipeline.
|
|
Currently set when setting the cursor location,
optionally used as an orientation type.
Intended for use by tools too.
See: D3208
|
|
For some we may add per object overrides, but for most we plan to keep them
strictly per viewport settings. Display settings from the mesh still need to
be moved here, only collections were done to remove that code.
|
|
Both the scene and workspace had an active view layer, and it was confusing
which settings were being used or displayed where. Now we always have one,
so there is no mismatch.
The "View Layers" tab in the properties editor is now "View Layer", no longer
showing a list of layers. Instead view layers can be added and removed with
the workspace view layer selector. They are also listed and selectable in the
outliner.
Single layer rendering uses the active view layer from the workspace.
This fixes bugs where the wrong active view layer was used, but more places
remain that are wrong and are now using the first view layer in the scene.
These are all marked with BKE_view_layer_context_active_PLACEHOLDER.
|
|
While the feature is interesting, it's not much from what we can tell.
Retargeting is an important feature but needs
to fit in better with typical animation work-flows.
See: T52809
|
|
Brecht authored this commit, but he gave me the honours to actually
do it. Here it goes; Blender Internal. Bye bye, you did great!
* Point density, voxel data, ocean, environment map textures were removed,
as these only worked within BI rendering. Note that the ocean modifier
and the Cycles point density shader node continue to work.
* Dynamic paint using material shading was removed, as this only worked
with BI. If we ever wanted to support this again probably it should go
through the baking API.
* GPU shader export through the Python API was removed. This only worked
for the old BI GLSL shaders, which no longer exists. Doing something
similar for Eevee would be significantly more complicated because it
uses a lot of multiplass rendering and logic outside the shader, it's
probably impractical.
* Collada material import / export code is mostly gone, as it only worked
for BI materials. We need to add Cycles / Eevee material support at some
point.
* The mesh noise operator was removed since it only worked with BI
material texture slots. A displacement modifier can be used instead.
* The delete texture paint slot operator was removed since it only worked
for BI material texture slots. Could be added back with node support.
* Not all legacy viewport features are supported in the new viewport, but
their code was removed. If we need to bring anything back we can look at
older git revisions.
* There is some legacy viewport code that I could not remove yet, and some
that I probably missed.
* Shader node execution code was left mostly intact, even though it is not
used anywhere now. We may eventually use this to replace the texture
nodes with Cycles / Eevee shader nodes.
* The Cycles Bake panel now includes settings for baking multires normal
and displacement maps. The underlying code needs to be merged properly,
and we plan to add back support for multires AO baking and add support
to Cycles baking for features like vertex color, displacement, and other
missing baking features.
* This commit removes DNA and the Python API for BI material, lamp, world
and scene settings. This breaks a lot of addons.
* There is more DNA that can be removed or renamed, where Cycles or Eevee
are reusing some old BI properties but the names are not really correct
anymore.
* Texture slots for materials, lamps and world were removed. They remain
for brushes, particles and freestyle linestyles.
* 'BLENDER_RENDER' remains in the COMPAT_ENGINES of UI panels. Cycles and
other renderers use this to find all panels to show, minus a few panels
that they have their own replacement for.
|
|
ViewRender was removed, which means we can't get the render engine for files
saved in 2.8. We assume that any files saved in 2.8 were intended to use Eevee
and set the engine to that.
A fix included with this is that .blend thumbails now draw with Clay mode,
and never Eevee or Cycles. These were drawn with solid mode in 2.7, and should
be very fast and not e.g. load heavy image textures.
Differential Revision: https://developer.blender.org/D3156
|
|
This was stored in the workspace, selected from the view.
Move both to scene since custom orientations are closely related to your
scene data.
|
|
Folders removed entirely:
* //extern/recastnavigation
* //intern/decklink
* //intern/moto
* //source/blender/editors/space_logic
* //source/blenderplayer
* //source/gameengine
This includes DNA data and any reference to the BGE code in Blender itself.
We are bumping the subversion.
Pending tasks:
* Tile/clamp code in image editor draw code.
* Viewport drawing code (so much of this will go away because of BI removal
that we can wait until then to remove this.
|
|
|
|
|
|
WEBM is the codec name, and VP9 is the encoder (the older encoder "VP8"
is less efficient than VP9).
WEBM/VP9 and h.264 both have options to control the file size versus
compression time (e.g. fast but big, or slow and small, for the same
output quality). Since WEBM/VP9 only has three choices, I've chosen to
map those to 3 of the 9 possible choices of h.264:
- BEST → SLOWER
- GOOD → MEDIUM
- REALTIME → SUPERFAST
The VERYSLOW and ULTRAFAST options give very little extra benefit.
Reviewed by: @Severin
|
|
|
|
Error in recent removal of workspace.object_mode
|
|
This caused too many problems syncing object modes
with multiple objects/windows/workspaces, see: D3130 for details.
|
|
|
|
This is useful to create a mapping from the frame range in the video to
frame index in the blend file.
Part of: https://developer.blender.org/D2273
Reviewed by: @campbellbarton
|
|
- Undo that changes modes currently asserts,
since undo is now screen data.
Most likely we will change how object mode and workspaces work
since it's not practical/maintainable at the moment.
- Removed view_layer from particle settings
(wasn't needed and complicated undo).
|