| Age | Commit message (Collapse) | Author |
|---|
|
Avoids accidents when adding/removing items from an enum.
|
|
In Blender 2.81 we update and draw all nodes inside the view planes.
When navigating with a pen tablet after an operation that tags the whole
mesh to update (like undo or inverting the mask), this introduces some
lag as nodes are updating when they enter the view. The viewport is not
fully responsive again until all nodes have entered the view after the
operation.
This commit delays nodes updates until the view navigation stops, so the
viewport navigation is always fully responsive. This introduces some
artifacts while navigating, so it can be disabled if you don't want to
see them.
I'm storing the update planes in the PBVH. This way I can add support
for some tools to update in real-time only the nodes inside this plane
while running the operator, like the mesh filter.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6269
|
|
This adds the automasking options to the Sculpt Tool options in a way
that they affect all brushes. This is more convenient when working with
some of these options while switching brushes as they don't need to be
enabled/disabled per brush.
An automasking option is enabled if it is enabled in the brush or in the
sculpt options.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7304
|
|
It appears this slipped through the code review
Reviewed By: sebbas
Differential Revision: https://developer.blender.org/D6760
|
|
|
|
This check box alters how weights are displayed and painted,
similar to Multi Paint, but in a different way. Specifically,
weights are presented as if all locked vertex groups were
deleted, and the remaining deform groups normalized.
The new feature is intended for use when balancing weights within
a group of bones while all others are locked. Enabling the option
presents weight as if the locked bones didn't exist, and their
weight was proportionally redistributed to the editable bones.
Conversely, the Multi-Paint feature allows balancing a group of
bones as a whole against all unselected bones, while ignoring
weight distribution within the selected group.
This mode also allows temporarily viewing non-normalized weights
as if they were normalized, without actually changing the values.
Differential Revision: https://developer.blender.org/D3837
|
|
We implement cubemap array support for EEVEE's lightcache reflection probes.
This removes stretched texels and bottom hemisphere seams artifacts caused
by the octahedral projection previously used.
This introduce versioning code for the lightcache which will discard any
lightcache version that is not compatible.
Differential Revision: https://developer.blender.org/D7066
|
|
|
|
This commit is a full refactor of the grease pencil modules including Draw Engine, Modifiers, VFX, depsgraph update, improvements in operators and conversion of Sculpt and Weight paint tools to real brushes.
Also, a huge code cleanup has been done at all levels.
Thanks to @fclem for his work and yo @pepeland and @mendio for the testing and help in the development.
Differential Revision: https://developer.blender.org/D6293
|
|
Face Sets are the new system to control the visibility state of the mesh in sculpt and paint modes. They are designed to work in modes where brushes are the primary way of interaction and they provide much more control when working with meshes with complex shapes and overlapping surfaces.
This initial commit includes:
- Sculpt Face Sets data structures and PBVH rendering.
- Face Set overlay and opacity controls.
- Sculpt Undo support.
- Remesher reprojection support. The visibility state of the mesh is also preserved when remeshing.
- Automasking and Mesh filter support.
- Mask expand operator mode to expand Face Sets (Shift + W) and flood fill areas by connectivity (press Ctrl while expanding).
- Sculpt Mode Face Sets and Visibility API.
- Sculpt Face Sets creation and visibility management operators.
- Operator to randomize the Face Sets colors.
- Draw Face Sets brush tool to create and edit the Face Sets. Drawing on the mesh creates a new Face Set. Pressing Ctrl before drawing modifies the Face Set under the brush at the beginning of the stroke.
- Updated keymap and menu to work with Face Sets from Sculpt Mode (H to toggle visibility, Alt + H to show all, Shit + H to hide).
- Pie menu on the W key with Face common Sets operations.
Know limitations:
- Multires support. The Face Sets and Visibility API needs to be implemented for Multires.
Reviewed By: jbakker, #user_interface, Severin
Differential Revision: https://developer.blender.org/D6070
|
|
|
|
This patch adds new render passes to EEVEE. These passes include:
* Emission
* Diffuse Light
* Diffuse Color
* Glossy Light
* Glossy Color
* Environment
* Volume Scattering
* Volume Transmission
* Bloom
* Shadow
With these passes it will be possible to use EEVEE effectively for
compositing. During development we kept a close eye on how to get similar
results compared to cycles render passes there are some differences that
are related to how EEVEE works. For EEVEE we combined the passes to
`Diffuse` and `Specular`. There are no transmittance or sss passes anymore.
Cycles will be changed accordingly.
Cycles volume transmittance is added to multiple surface col passes. For
EEVEE we left the volume transmittance as a separate pass.
Known Limitations
* All materials that use alpha blending will not be rendered in the render
passes. Other transparency modes are supported.
* More GPU memory is required to store the render passes. When rendering
a HD image with all render passes enabled at max extra 570MB GPU memory is
required.
Implementation Details
An overview of render passes have been described in
https://wiki.blender.org/wiki/Source/Render/EEVEE/RenderPasses
Future Developments
* In this implementation the materials are re-rendered for Diffuse/Glossy
and Emission passes. We could use multi target rendering to improve the
render speed.
* Other passes can be added later
* Don't render material based passes when only requesting AO or Shadow.
* Add more passes to the system. These could include Cryptomatte, AOV's, Vector,
ObjectID, MaterialID, UV.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D6331
|
|
|
|
This patch adds a dedicated path to extract 16bit normals instead of packing them into 10bits/comp.
The tangents are also packed to 10bits/comp if not using the new High Quality Normal option.
Fix T61024 Degraded texture shading on dense meshes
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6614
|
|
|
|
|
|
This allows for more flexibility in Compositing compared to the
hardcoded alpha-over that is currently used.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6829
|
|
Liblink specific ID type function was so far running a loop over all IDs
of relevant type, unlike almost any other 'ID-callback-like' functions
in Blender, which usually let the looping controll to calling code.
The latter approach is more convinient when one want to add generic
(i.e. type-agnostic) code, since it typically only has to change code in
one place (caller function) instead of tens of places (all the callback
functions).
This commit also changes/sanitizes a few things that had nothing to do
in main liblink code, like mesh conversion from tessfaces to polys
(which can be done in after-linking versionning code), or scenes' cycles
detection/check regarding background 'set' scenes.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6727
|
|
Technically, pointers are to be padded with followup pointer.
|
|
Also remove dead code which checked for SPACE_TIME.
|
|
Some other areas in the brush code outside sculpt mode assume that
pressure is multiplied directly on top of the initial size. This patch
calculates the pixel radius correctly using the brush size from sculpt
mode to get the dyntopo detail size.
When the new brush input system is in place, all these values will come
directly from the brush input code with all the custom curves applied
per brush, so all paint modes will have a correct brush behavior and all
this sculpt mode specific code won't be necessary.
Reviewed By: jbakker
Maniphest Tasks: T72092
Differential Revision: https://developer.blender.org/D6339
|
|
Implement T66304 as an experimental option,
available under the preferences "Experimental" section.
- When enabled most tools in the 3D view have a gizmo.
- Dragging outside the gizmo uses the 'fallback' tool.
- The fallback tool can be changed or disabled in the tool options
or from a pie menu (Alt-W).
|
|
The relation between the pressure/size and the pressure/alpha is a
fundamental property that defines the behavior of a brush, so it does
not make sense to have it unified across all brushes. This applies both
for sculpting and painting.
Some of the new 2.82 brushes need pressure/size or pressure/alpha to be
enabled to work propely, while others don't. Users should not be
switching on and off this property manually when changing brushes if they
want to use unified size. This is also causing that some users are using
the brushes with an incorrect configuration.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6291
|
|
When doing viewport rendering the color management happens on the CPU.
This has overhead in downloading a float texture from the gpu and
performing color management on the CPU.
Based on the scene fileformat bit depth the result will be rendered to
a byte texture where the colormanagement happens on the GPU or a float
texture where the colormanagement happens on the CPU.
This is only done during `Viewport Render Animation` in other
cases a float texture is being used.
Baseline (HD render of wanderer.blend workbench engine no samples) 15.688038 s
After changes: 9.412880s
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6195
|
|
Also correct some outdated symbol references,
add missing 'name' commands.
|
|
Custom profiles in bevel allows the profile curve to be controlled by
manually placed control points. Orientation is regularized along
groups of edges, and the 'pipe case' is updated. This commit includes
many updates to comments and changed variable names as well.
A 'cutoff' vertex mesh method is added to bevel in addition to the
existing grid fill option for replacing vertices.
The UI of the bevel modifier and tool are updated and unified.
Also, a 'CurveProfile' widget is added to BKE for defining the profile
in the interface, which may be useful in other situations.
Many thanks to Howard, my mentor for this GSoC project.
Reviewers: howardt, campbellbarton
Differential Revision: https://developer.blender.org/D5516
|
|
Add new `Backface Culling` option to the snapping properties.
This option has nothing to do with the view3d display or the
workbench `Backface Culling` option.
Limitation:
- In edit mode, this option only affects snap to faces.
Maniphest Tasks: T71217
Differential Revision: https://developer.blender.org/D6155
|
|
|
|
Users now can turn on in a viewport collections that are temporarily
hidden (eye) in the view layer.
Design task: T61327
As for the implementation, I had to decouple the visibility in the
depsgraph from the visibility in the view layer.
Also there is a "bug" that in a way was there before which is some
operators (e.g., writing a text inside of a text object, tab into edit
mode) run regardless of the visibility of the active object. The bug was
present already (with object type visibility restriction) in 2.80 so if
we decide to tackle it, can be done separately (I have a patch for it
though P1132).
Reviewed by: brecht (thank you)
Differential Revision: D5992
|
|
Support per-viewport collection visibility options.
Note 1: There is no way to show a collection that was not visible before
due to depsgraph. Otherwise we would risk having all the collections in
the depsgraph and I believe this is not the idea.
An alternative would be to have a new depsgraph for viewports that are
not local. Something to keep in mind if we do per-viewport current frame
in the future.
So for now what we do is to only allow collections visibility to be
disabled/hidden in this mode.
Note 2: hide_viewport (the eye icon) doesn't really matter for
depsgraph. So after the merge we can still ignore it to show the
collections locally in a viewport with no problems for the depsgraph.
Reviewers: brecht, sergey
Subscribers: billreynish
Related task: T61327
Differential Revision: https://developer.blender.org/D5611
|
|
This is useful to disable all layers tint in one step and it will be used for future operators.
|
|
|
|
+ Simplify code, move into own function and run once rather than on every point
+ Improved snapping when a stroke is between increments
+ Added ISO grid option for lines specified by Angle under guide settings
+ Radial snapping mode uses Angle as an offset
Differential Revision: https://developer.blender.org/D5668
|
|
Reviewed By: brecht
Differential Revision: http://developer.blender.org/D5659
|
|
In weightpaint it is possible to enable the bone selection mode. During
drawing the overlay was rendered, but during selection this was ignored.
Users needed to double click in order to select bones even when the overlay
was enabled.
This patch makes bone selection possible during weight painting using the pose mode bone
selection overlay with a single click.
Reviewed By: fclem, campbellbarton
Differential Revision: https://developer.blender.org/D5629
|
|
Supports parent/child chains with mixed selections.
Currently accessible from the pivot popover
(may be moved along with the other options here).
|
|
Ref T66423
Differential revision: https://developer.blender.org/D5562
|
|
|
|
Currently supports mesh, armature, lattice, curve & metaballs.
Access from pivot popover.
|
|
'snap_node_element'
I don't think a versioning solution is necessary in this case.
But it can still be implemented.
|
|
This reverts commit 48a7f979a5cf2669656d25767c4173fb65bfb67d.
Another solution to come.
|
|
Increase the size of the snap mode so the flag can be used.
|
|
`SCE_SNAP_MODE_GRID` is used for both nodes and objects.
I don't think it's worth versioning in this case.
|
|
Part of T66420
Option for snapping to the nearest point of a reference coordinate.
The patch also adds Edge Center and Perpendicular snaps to the ruler.
{F7675906}
Reviewers: campbellbarton, brecht
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D5543
|
|
Part of T66420
Reviewers: campbellbarton, brecht
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D5532
|
|
Actually, the selection mode is not visible in Sculpt mode when mask is enabled, but still is used.
Also, the mode is shared between Edit mode and Sculpt mode and for meshes the selector is by mode.
This commit splits the select mode in different properties and show the selector in Sculpt mode to define the Select mode. Also, the Select Mask button has been removed and now the Select Mode buttons work equal to Meshes where the select buttons are the mask enable too.
Fixed some old code not valid detected during these changes.
Differential Revision: https://developer.blender.org/D5500
|
|
This should have been removed in 2.80 as the functionality was removed.
This feature now does not do anything and can be removed.
Differential Revision: https://developer.blender.org/D5411
|
|
T68035 by @luzpaz
|
|
This was a very specific option to display in global tool settings.
Now this is exposed in the operator when edge-select mode is enabled.
|
|
See T64324 for discussion re improving normal editing ui.
As next step, remove the face_strength tool settings because
menu operator now includes that. Move face_strenth enum to
better place.
Remove normals toolbar panel because only thing left
(normal_vector) can stay hidden for copy/paste.
Remove add vector and multiply vector menu entries as
they are useless without ui method for specifying operand,
and they are very low utility operations anyway.
|
