Age | Commit message (Collapse) | Author |
|
No functional changes.
|
|
Ref T86135.
Differential Revision: https://developer.blender.org/D10681
|
|
This implements the MVP for the new spreadsheet editor (T85879). The functionality
is still very limited, but it proved to be useful already. A more complete picture
of where we want to go with the new editor can be found in T86279.
Supported features:
* Show point attributes of evaluated meshes (no original data, no other domains,
no other geometry types, yet). Since only meshes are supported right now, the
output of the Point Distribute is not shown, because it is a point cloud.
* Only show data for selected vertices when the mesh is in edit mode.
Different parts of Blender keep track of selection state and original-indices with
varying degrees of success. Therefore, when the selected-only filter is used, the
result might be a bit confusing when using some modifiers or nodes. This will
be improved in the future.
* All data is readonly. Since only evaluated data is displayed currently, it has to
be readonly. However, this is not an inherent limitation of the spreadsheet editor.
In the future editable data will be displayed as well.
Some boilerplate code for the new editor has been committed before in
rB9cb5f0a2282a7a84f7f8636b43a32bdc04b51cd5.
It would be good to let the spreadsheet editor mature for a couple of weeks as part
of the geometry nodes project. Then other modules are invited to show their own data
in the new editor!
Differential Revision: https://developer.blender.org/D10566
|
|
Adds toggle to graph editor (View->Show Extrapolation). When disabled,
then fcurves only draw over the keyframe range. For baked fcurves and
ghost fcurves, the range is all sampled points.
It is intended for frequent use so anybody could assign hotkey or add
to quick favorites that's why GE-View is the best place for it.
Show Extrapolation is the default.
Reviewed By: sybren, Stan1, looch
Differential Revision: http://developer.blender.org/D10442
|
|
This adds the initial boilerplate code that is required to introduce
the new spreadsheet editor. The editor is still hidden from the ui.
It can be made visible by undoing the change in `rna_screen.c`.
This patch does not contain any business logic for the spreadsheet editor.
Differential Revision: https://developer.blender.org/D10645
Ref T86279.
|
|
Add an RNA function `activate_asset_by_id(asset_id: ID, deferred: bool)`
to the File Browser space type, which intended to be used to activate an
asset's entry as identified by its `ID *`. Calling it changes the active
asset, but only if the given ID can actually be found.
The activation can be deferred (by passing `deferred=True`) until the
next refresh operation has finished. This is necessary when an asset has
just been added, as it will be loaded by the filebrowser in a background
job.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D10549
|
|
Updates the descriptions and labels for outliner sync in the properties
editor popover to be more clear.
Differential Revision: https://developer.blender.org/D10010
|
|
|
|
The "Current File" asset library didn't get refreshed after the data-block name
changed. But rather than entirely refreshing the file list, or doing possibly
problematic partial refreshes, reference the data-block name directly, so a
simple redraw gets the new name displayed.
Addresses T83751
|
|
This commit moves runtime-only variables from the `SpaceNode`
DNA struct to a private struct in `node_intern.h`. Before, it was hard
to tell which data needed to be saved in files, this should make it
more clear.
Node that the `edittree` field is basically a runtime variable, since
it's set from the `treepath` list on read, but moving it would require
some more invasive changes that I don't think are worth it right now.
Also, not all of the moved variables were explicitly cleared on read--
`aspect` is set at the start of a redraw, `cursor` is set in a region
callback, and `recalc` was used as an update flag.
Differential Revision: https://developer.blender.org/D10141
|
|
Having a centeral place to find a list of all library overrides should be
useful for managing production scenes where library overrides are used a lot.
This change adds the individually overridden properties of a data-block under
the data-block itself. Just how we show modifiers, constraints or pose channels
there. This way we can also expose library override operations/options better
in future.
There's also a filter option for the library overrides now, so they can be
hidden. It is only available in the View Layer display mode though, like the
other filter options.
One internal change this has to do is adding more informative return values to
undo pushes and the library override functions called by it. That way we can
send a notifier when library overrides change for the Outliner to know when to
rebuild the tree.
Differential Revision: https://developer.blender.org/D7631
Reviewed by: Andy Goralczyk, Bastien Montagne, William Reynish
|
|
This adds a popover to the properties editor. Currently the only setting
is for controlling outliner to properties syncing.
Because we cannot define a perfect heuristic to determine when
properties editors should change tabs based on outliner icon selection,
we need an option to enable or disable this behavior per properties
editor.
There are 3 options for controlling the syncing. Auto uses the heuristic
to only allow tab switching when a properties editor and outliner share
a border. On and off enable and disable syncing respectively.
Differential Revision: https://developer.blender.org/D9758
|
|
Add panels with overlay settings for strips and preview and overlay
enable/disable button.
Entries from the View menus moved to the overlay panels, which will
simplify cluttered View menus.
Additional options have been added:
- Strip Name
- Strip Source(ex. path)
- Strip Duration
So users can now select what info they need to see on the strips. When
No text is displayed, waveforms are drawn in full height.
Reviewed By: ISS, HooglyBoogly, pablovazquez
Differential Revision: https://developer.blender.org/D9751
|
|
Storing the asset library reference by name wasn't a good idea, I thought it
would work with a careful fallback, but it's easier to just use the index
instead. So change to using indices, make sure fallback methods work reliable
and make sure the file list is updated when asset libraries are removed.
I added a new notifier type for the latter, I prefer not using file notifiers
in asset-library/preferences code. We have more than enough values for
notifiers left.
|
|
The Asset Browser will be a sub-editor of the File Browser. This prepares the
File Browser code for that.
**File-Lists**
* Support loading assets with metadata read from external files into the
file-list.
* New main based file-list type, for the "Current File" asset library.
* Refresh file-list when switching between browse modes or asset libraries.
* Support empty file-lists (asset library with no assets).
* Store file previews as icons, so scripts can reference them via icon-id. See
previous commit.
**Space Data**
* Introduce "browse mode" to differeniate between file and asset browsing.
* Add `FileAssetSelectParams` to `SpaceFile`, with `FileSelectParams` as base.
Makes sure data is separated between asset and file browsing when switching
between them. The active params can be obtained through
`ED_fileselect_get_active_params()`.
* `FileAssetSelectParams` stores the currently visible asset library ID.
* Introduce file history abstraction so file and asset browsing can keep a
separate history (previous and next directories).
**General**
* Option to only show asset data-blocks while file browsing (not exposed here).
* Add "active_file" context member, so scripts can get and display info about
the active file.
* Add "active_id" context member, so `ED_OT_lib_id_load_custom_preview` can set
a custom ID preview. (Only for "Current File" asset library)
* Expose some of `FileDirEntry` in RNA as (non-editable). That way scripts can
obtain name, preview icon and asset-data.
Part of the first Asset Browser milestone. Check the #asset_browser_milestone_1
project milestone on developer.blender.org.
Differential Revision: https://developer.blender.org/D9724
Reviewed by: Bastien Montagne
|
|
Makes it more clear that these belong together and allows using the enum type
rather than just `int`.
|
|
This way Outliner internal data stays internal, non-Outliner code will not be
able to access and mess with this. Further it allows us to use the real type
(rather than `void *`), change the type to a C++ container if needed and
slightly reduces the size for every Outliner stored in files.
Slightly changed how we set the `SO_TREESTORE_REBUILD` for this, but it should
effectively behave the same way as before.
|
|
This adds an invert toggle for the outliner object state filters.
There are some cases where we want a filter for invertable states (Selected,
Unselected) and having a single toggle to invert the filter reduces the
number of separate filter types needed. This removes the "Hidden" filter
which can now be replicated with an inverted "Visible" filter.
Differential Revision: https://developer.blender.org/D9598
|
|
Some DNA headers already did this, most did not. Even though many of them would
be included in C++ files and thus compiled as C++. This would be confusing and
developers may think they have to add `extern "C"` too a whole lot of
(indirect) includes to be able to use a C header in C++.
However, this is a misconception.
`extern "C"` does not cause code to be compiled with C rather than C++! It only
causes the linker to not use C++ function name mangling. See
https://stackoverflow.com/a/1041880.
Because extern DNA headers don't have function declarations, using `extern "C"`
actually should not have any effect. On the other hand, adding it causes no
harm and avoids confusion. So let's just have it consistently in C header
files.
Differential Revision: https://developer.blender.org/D9578
Reviewed by: Bastien Montagne, Sybren Stüvel
|
|
This introduces a new C++ abstraction "tree-display" (in this commit named
tree-view, renamed in a followup) to help constructing and managing the tree
for the different display types (View Layer, Scene, Blender file, etc.).
See https://developer.blender.org/D9499 for more context. Other developers
approved this rather significantly different design approach there.
----
Motivation
General problems with current design:
* The Outliner tree building code is messy and hard to follow.
* Hard-coded display mode checks are scattered over many places.
* Data is passed around in rather unsafe ways (e.g. lots of `void *`).
* There are no individually testable units.
* Data-structure use is inefficient.
The current Outliner code needs quite some untangling, the tree building seems
like a good place to start. This and the followup commits tackle that.
----
Design Idea
Idea is to have an abstract base class (`AbstractTreeDisplay`), and then
sub-classes with the implementation for each display type (e.g.
`TreeDisplayViewLayer`, `TreeDisplayDataAPI`, etc). The tree-display is kept
alive until tree-rebuild as runtime data of the space, so that further queries
based on the display type can be executed (e.g. "does the display support
selection syncing?", "does it support restriction toggle columns?", etc.).
New files are in a new `space_outliner/tree` sub-directory.
With the new design, display modes become proper units, making them more
maintainable, safer and testable. It should also be easier now to add new
display modes.
|
|
Move the "Show Group Colors" toggle from a per-editor option to a single
user preference in the Animation preferences. The Grease Pencil
animation channel side panel allows picking a channel color; this now
shows a message when channel colors are disabled.
The old "Show Group Colors" toggle had to be set per editor, and was on
by default. This meant that disabling group colors would require an
action for every file, for every editor. It is very hard to select a
color that works both as bone color in the 3D Viewport (needs to be
bright there) as well as the channel list (needs to be dark there), most
animators turn channel list colors off.
Differential Revision: https://developer.blender.org/D9391
|
|
|
|
This addition to the filters allows the user to enable the
outliner tree to restrict the listing to only Selectable objects.
Differential Revision: https://developer.blender.org/D7310
|
|
`WM_operator_properties_filesel()` allows C operators to set a display or sort
type for the File Browser to use. But the File Browser would always override
that because of an invalid `_is_set()` check. (The operators don't actually set
the value, they only set the property's default value.)
The only operator affected by this is "Recover Auto Save". It is supposed to
show a vertical list ordered chronologically. It used settings from the
previous File Browser usage before this patch.
Operators using the File Browser should generally use
`FILE_DEFAULTDISPLAY`/`FILE_SORT_DEFAULT` now, except if they have a reason not
to. See comments at their definition.
----
This makes it so operators that set a different display or sort type
don't change the sort or display type for the next File Browser operation.
So using "Recover Auto Save" entirely isolates display and sort type from other
operations.
Differential Revision: https://developer.blender.org/D8598
Reviewed by: Bastien Montagne
|
|
There should not be much user visible here (other than T73668 being addressed).
I added the writing code already for the initial implementation of workspaces,
but we decided to keep it disabled until the top-bar design is more clear. It
was never planned to keep this disabled for so long.
Fixes T73668.
|
|
With D8234 a new drawing method for UV/Image editor was introduced. For debugging
reasons we left the old drawing method in the code base. This patch will remove
the old drawing method.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D9011
|
|
This patch enables property search for all tabs in the property editor.
To make interaction faster, if the editor's current tab doesn't have a
result, the current tab changes to the next tab that has a match.
This patch implements basic code that only searches panels.
While we could run the existing "single tab" property search for every
tab, that would also do everything else related to the layout pass,
which would be less efficient, and maybe more complicated to maintain.
The search match status for every current tab of the property editor is
stored in a runtime bitfield and them displayed later by dimming icons
in the tab selector panel to the left. Using `BLI_bitmap` properly in
the runtime struct required moving it to `buttons_intern.h` and
adding a small API to access the search filter instead.
To make sure the editor isn't influenced by anything that happens while
building the layout for other tabs, most of the context is duplicated
and the new search is run in the duplicated editor.
Note that the tool settings tab works slightly different than the other
tabs, so I've disabled searching it for this commit. That would be a
relatively simple improvement, but would just require a bit of
refactoring of existing code.
Differential Revision: https://developer.blender.org/D8859
|
|
The overlay options in the image/uv editor is hidden in side panels and menus. Sometimes this panel is even hidden, while still useful.
The goal of this task is to introduce an overlay pop-over just like the overlay-popover of the 3d viewport.
Popover has
* UV Stretching (only available in the UV mode, when active object mode is a mesh and in OB_EDIT mode)
* Display As (only available in the UV mode, when active object mode is a mesh and in OB_EDIT mode)
* Show Modified (only available in the UV mode, when active object mode is a mesh and in OB_EDIT mode)
* Show UV Edges (including opacity slider; available UV, View, Paint, when active object mode is a mesh and in OB_EDIT mode)
* Udim tiles when no image is available.
Like the 3d viewport, there will be a editor toggle to enable/disable the overlays
For compatibility reasons the RNA properties are added to both the `SpaceImage.uv_editor` amd `SpaceImage.overlay`. On DNA level they are still stored in the SpaceImage. only new properties are added to the SpaceImageOverlay struct. During the next major release we could remove these options from `SpaceImage.uv_editor`. This should be noted in the Python section of release notes.
Reviewed By: Julian Eisel, Pablo Vazquez
Differential Revision: https://developer.blender.org/D8890
|
|
Remove word proxy from eSpaceSeq_Proxy_RenderSize members if proxy is
not used with that item. Otherwise this can be a bit confusing.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8861
|
|
This adds a search bar to the properties editor. The full search for
every tab isn't included in this patch, but the interaction with
panels, searching behavior, UI, region level, and DNA changes are
included here.
The block-level search works by iterating over the block's button
groups and checking whether they match the search. If they do, they
are tagged with a flag, and the block's panel is tagged too. For
every update (text edit), the panel's expansion is set to whether
the panel has a result or not. The search also checks for matching
strings inside enums and in panel labels.
One complication to this that isn't immediately apparent is that
closed panel's subpanels have to be searched too. This adds some
complexity to the area-level panel layout code.
Possible Future Improvements:
- Use the new fuzzy search in BLI
- Reset panels to their expansion before the search started if
the user escape out of the text box.
- Open all child panels of a panel with expansion.
Differential Revision: https://developer.blender.org/D8856
|
|
This reverts commit f492c8d488b7eb2166ca894e10a8128a1678a885.
|
|
There are some areas that don't handle pure emissive colors well. For
example erasing alpha using 2d or 3d painting. Or blurring an image in
the compositor.
This patch makes the rendering of pure emissive colors optional. In the
side panel of the Image editor it can still be enabled when needed.
There currently isn't a better place to store it as it is related on how
the image (or a layer of the image) is created. A future design needs to
make sure that the full workflow is supported.
|
|
Add a column of icons in the left gutter of the outliner for controlling
the interaction modes of objects. When an object is in a mode other than
object mode, the mode icon will draw to the left of that object. Any
other objects that are valid to be added or swapped into the mode are
drawn with a dot to the left of the object.
Clicking the dot to the left of an object will swap that object with the
current active object in the interaction mode. For edit and pose modes,
ctrl clicking the dot will add that object to the current mode.
Clicking the mode icon next to the active object removes it and all
other objects from the current mode.
The behavior is nearly identical to the previous edit/pose mode toggling
by selecting the mesh and armature datablocks, with additional support
for all interaction modes.
Currently two undo steps are pushed to prevent an assert.
Part of T77408
Manifest Task: https://developer.blender.org/T68498
Differential Revision: https://developer.blender.org/D8641
|
|
Also update old comment.
|
|
Use 'e' prefix, update comments.
|
|
This patch supports instantiating object data on append/link,
reported as a bug T58304.
This is an option, available when linking/appending,
similar to the existing "Instance Collections" option.
Reviewed by @sybren
Ref D8792
|
|
In this mode the preview image is always using the most of the preview
area space: it is scaled to fit, preserving aspect ratio. This makes it
possible to always have maximum of the preview region even after resize
of other areas.
This mode is enabled by default, is available in the View -> Zoom to Fit
menu. It is enabled when View All (Home key) is used, and is disabled
when manual navigation ([panning, zooming) is performed.
There is no versioning code, which means existing files will open as-is,
but new projects will have this option enabled.
Ref T78987
Maniphest Tasks: T78987
Differential Revision: https://developer.blender.org/D8549
|
|
This replaces header include guards with `#pragma once`.
A couple of include guards are not removed yet (e.g. `__RNA_TYPES_H__`),
because they are used in other places.
This patch has been generated by P1561 followed by `make format`.
Differential Revision: https://developer.blender.org/D8466
|
|
|
|
Also update/correct some of the comments.
|
|
|
|
Use eSpace_Type in cases where it's likely newly added spaces
should be handled.
|
|
Avoids accidents when adding/removing items from an enum.
|
|
Add this option as it's useful to adjust how much UV's
cover the image when UV mapping.
D5348 by @EitanSomething with edits
|
|
Feature can be enabled or disabled in timeline view menu item "Show F-Curves".
Author a.monti
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D7205
|
|
This adds support for macOS aliases in addition to symlinks. It also adds
support for hidden, readonly and system file attributes.
Contributed by Ankit (ankitm) with modifications by me.
Differential Revision: https://developer.blender.org/D6679
|
|
Contributed by luzpaz.
Differential Revision: https://developer.blender.org/D7133
|
|
|
|
Only the volume object is exposed in the user interface. It is based on OpenVDB
internally. Drawing and rendering code will follow in another commit.
https://wiki.blender.org/wiki/Source/Objects/Volume
https://wiki.blender.org/wiki/Reference/Release_Notes/2.83/Volumes
Hair and PointCloud object types are hidden behind a WITH_NEW_OBJECT_TYPES
build option. These are unfinished, and included only to make it easier to
cooperate on development in the future and avoid tricky merges.
https://wiki.blender.org/wiki/Source/Objects/New_Object_Types
Ref T73201, T68981
Differential Revision: https://developer.blender.org/D6945
|
|
And change file browser to boolean from bitflag enum, which is only 32 bit.
Differential Revision: https://developer.blender.org/D7004
|