Age | Commit message (Collapse) | Author |
|
Implements T89789, T89792, custom grid (described as dynamic grid in
T78389) and UV grid snapping (T78391)
Replaces the default UV editor grid with 2 new types of grid :
* Custom grid: Allows the user to create an NxN grid, where the value
of N is specified by the user.
* Subdividing grid: Subdivides the UV editor grid when the user
zooms in the viewport and vice versa when zooming out.
UV snapping improvements :
* Increment snapping: Increment values for snapping are calculated based
on which grid type is being used in the UV editor
(subdividing or custom). In general the increment value is equal to
the distance between 2 visible grid lines.
* Absolute grid snap: New toggle added to increment snapping option in
the UV editor, allows UV grid snapping during translation.
Reviewed By: campbellbarton
Ref D12684
|
|
Until now, the asset catalogs would only show up after all assets from
the library were loaded. Now the catalogs are read first, which makes
them appear pretty much immediately. This makes the UI more responsive
and feel less heavy.
I added a dedicated file-list type for asset libraries now. While not
necessarily needed, I prefer that so asset library specific stuff can be
handled in there.
|
|
Flags controlling link/append code are split between two enums, one in
`DNA_space_types.h` and one in `BLO_readfile.h`.
This commit:
- Moves flags exclusively used in WM and BLO code to `eBLOLibLinkFlags`
in `BLO_readfile.h`. Flags in `eFileSel_Params_Flag` from
`DNA_space_types.h` are now only the ones effectively used by the
file browser editor code too.
- Fixes some internal utils in `readfile.c` still taking `short` flag
parameter instead of proper `int` one.
NOTE: there are a few other flags that could probably be moved to
`eBLOLibLinkFlags` (at the very least `FILE_LINK`, probably also
`FILE_AUTOSELECT` and `FILE_ACTIVE_COLLECTION`), since those are not
effectively used by the file browser, and control linking/appending
behavior, not filebrowser behavior.
However for now think it's safer to not touch that.
|
|
Draw thumbnails as strip overlay. This works for movie and image strips.
To draw thumbnails, this overlay has to be enabled and strips must be
tall enough.
The thumbnails are loaded from source file using separate thread and
stored in cache.
Drawing code uses only images stored in cache, and if any is missing,
background rendering job is started. If job can not render thumbnail,
to prevent endless loop of creating job for missing image it sets
`SEQ_FLAG_SKIP_THUMBNAILS` bit of `Sequence` flag.
To prevent visual glitches during timeline panning and zooming, `View2D`
flag `V2D_IS_NAVIGATING` is implemented. If bit is set, drawing code
will look for set of evenly distributed thumbnails that should be
guaranteed to exist and also set of previously displayed thumbnails.
Due to volatile nature of cache these thumbnails can be missing anyway,
in which case no new thumbnails will be drawn for particular strip.
Cache capacity is limited to 5000 thumbnails and performs cleanup of
non visible images when limit is reached.
ref T89143
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D12266
|
|
Add tools for image manipulation in sequencer preview region.
This includes:
- Translate, rotate and resize operators, tools and gizmos
- Origin for image transformation
- Median point and individual origins pivot modes
- Select and Box select operator works in preview
- Image overlay drawing
ref T90156
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12105
|
|
Move overlay flags into SequencerPreviewOverlay and
SequencerTimelineOverlay structs.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12569
|
|
With this, asset libraries can be directory structures and all assets in
sub-directories will show up in an Asset Browser.
With complex directory structures and many .blend files inside, asset
library reading will be quite slow for now. There's initial work being
done to introduce indexing for this (T82979), other optimizations are
being discussed as well.
Addresses T91406.
Differential Revision: https://developer.blender.org/D12139
|
|
This commit fully refactors the way linked IDs are made local when
appended.
Previously, `BKE_library_make_local` was (ab)used for this task, but it
was missing some contextual data and doing complex processing to try to
work around this, with limited sucess. Further more, it was nearly
impossibe to extend (e.g. to get new append behaviors necessary for the
asset project).
The new code is a dedicated append step in WM linking process.
NOTE: BPY API (`libray.load()` context manager) uses its own code here,
which still relies on `BKE_library_make_local` for appending.
Unfortunately, merging those two different code paths is not trivial so
for now this API will remain unchanged.
Fix T55629: Append already linked Data is impossible.
|
|
In the `FileList` struct, rename the `AssetLibraryReference
*asset_library` field to `asset_library_ref` -- it's a description of
which asset library is used, and not the asset library itself.
This is to make space for a future `AssetLibrary *asset_library` field,
which will point to an actual asset library struct/class.
No functional changes.
Reviewed by: Severin
Differential Revision: https://developer.blender.org/D12151
|
|
|
|
This isn't used at all in the current File and Asset Browser design.
|
|
Add overlay option to disable grid drawing.
Reuse drawing code from other editors (timeline editor)
Add argument `display_minor_lines` to function
`UI_view2d_draw_lines_x__discrete_frames_or_seconds`
This way minor line drawing can be disabled and so it doesn't cause
too much visual noise. Also spacing seems to be too fine, so VSE uses 3x
what is defined in preferences.
Reviewed By: fsiddi, Severin
Differential Revision: https://developer.blender.org/D11790
|
|
Since recently it's possible to access assets from outside the
File/Asset Browser, via the asset view template. So we are slowly
moving away from file space specific code to dedicated asset system
code. I introduced `AssetLibraryReference` as a duplicate of
`FileSelectAssetLibraryUID`, with a plan to delete the latter in a
separate cleanup commit. That's exactly what this commit is.
This will cause Asset Browsers to open with the default "Current File"
Asset Library. We could avoid that, but it's a minor issue really.
|
|
This per-workspace active asset library will be used by the asset views
later. Note that Asset Browsers have their own active asset library,
overriding the one from the workspace.
As part of this the `FileSelectAssetLibraryUID` type gets replaced by
`AssetLibraryReference` which is on the asset level now, not the
File/Asset Browser level. But some more work is needed to complete that,
which is better done in a separate commit.
This also moves the asset library from/to enum-value logic from RNA to
the editor asset level, which will later be used by the asset view.
|
|
When renaming an ID somewhere in the UI after marking it as asset, it would
often get lost in the Asset Browser (scrolled out of view). It would also get
deactivated.
This patch makes sure that if an asset is active whose ID gets renamed, it is
kept active and visible. That is important for a fast, uninterrupted asset
creation workflow, where users often rename assets while working in the asset
browser.
Old code stored the new file-name to identify a file after re-reading the
file-list after the rename. For assets that doesn't work because there may be
multiple assets with the same name. Here the simple solution of just storing
the pointer to the renamed ID is chosen, rather than relying on the file-name
in this case. (Should be fine with undo, since the ID * reference is short
lived, it's not stored over possible undo steps. If it turns out to have
issues, I rather switch to a rename_id_uuid, but keep that separate from the
file->uid).
Reviewed by: Sybren Stüvel
Differential Revision: https://developer.blender.org/D11119
|
|
This adds a viewer node similar to the one in the compositor.
The icon in the headers of nodes is removed because it served
the same purpose and is not necessary anymore.
Node outputs can be connected to the active viewer using
ctrl+shift+LMB, just like in the compositor. Right now this collides
with the shortcut used in the node wrangler addon, which will
be changed separately.
As of now, the viewed geometry is only visible in the spreadsheet.
Viewport visualization will be added separately.
There are a couple of benefits of using a viewer node compared
to the old approach with the icon in the node header:
* Better support for nodes that have more than one geometry output.
* It's more consistent with the compositor.
* If attributes become decoupled from geometry in the future,
the viewer can have a separate input for the attribute to visualize.
* The viewer node could potentially have visualization settings.
* Allows to keep "visualization points" around by having multiple
viewer nodes.
* Less visual clutter in node headers.
Differential Revision: https://developer.blender.org/D11470
|
|
|
|
Also use doxy style function reference `#` prefix chars when
referencing identifiers.
|
|
This code was written for the File Browser together with the Asset Engine
design, that is not part of the Asset Browser/System design anymore. Updated
comments accordingly.
`FileDirEntryRevision` was actually used, but I removed it and moved the used
members to the parent `FileDirEntry`, since there is no concept of revisions
currently.
There should be no functional changes.
|
|
To some degree these are changes in preparation of further Asset Browser
related changes, see D11119. But also, the current UUID design was written for
the old Asset Engine design, which isn't part of the current Asset
Browser/System design anymore.
And lastly, "UUID" are a well established standard
(https://en.wikipedia.org/wiki/Universally_unique_identifier) which this
implementation didn't follow. What we have here is more of an index, or a
unique identifier (https://en.wikipedia.org/wiki/Unique_identifier).
So this does the following changes:
* Renames "UUID" to "UID"
* Changes the type of the UID to (a typedef'ed) `uint32_t`, which is more than
enough for our current asset system design and simplifies things.
* Due to the new type, we can avoid allocations for hash-table storage.
* Add/use functions for UID handling
Note that I am working on a major rewrite of the file-list code. Meanwhile we
want to keep things sensible.
|
|
This option allow users to see the view layer in context to the
others. It is particularly useful to see which view layers have which
collections enabled, and their render settings (holdout, ...).
This option is off by default.
Differential Revision: https://developer.blender.org/D11708
|
|
|
|
In-progress Safari download files/packages are now recognized as bundles
and therefore not treated as directories.
Differential Revision: https://developer.blender.org/D11613
|
|
This patch adds support for filtering rows based on rules and values.
Filters will work for any attribute data source, they are a property
of the spreadsheet rather than of the attribute system. The properties
displayed in the row filter can depend on data type of the currently
visible column with that name. If the name is no longer visible, the
row filter filter is grayed out, but it will remember the value until
a column with its name is visible again.
Note: The comments in `screen.c` combined with tagging the sidebar
for redraw after the main region point to a lack of understanding
or technical debt, that is a point to improve in the future.
**Future Improvements**
* T89272: A search menu for visible columns when adding a new filter.
* T89273: Possibly a "Range" operation.
Differential Revision: https://developer.blender.org/D10959
|
|
Note: Linking in this case as in link vs. append. Easily confused with linking
a data-block to multiple usages (e.g. single material used by multiple
objects).
Adds a drop-down to the Asset Browser header to choose between Link and Append.
This is probably gonna be a temporary place, T54642 shows where this could be
placed eventually.
Linking support is crucial for usage of the asset browser in production
environments. It just wasn't enabled yet because a) the asset project currently
focuses on single user, not production assets, and b) because there were many
unkowns still for the workflow that have big impact on production use as well.
With the recently held asset workshop I'm more confident with enabling linking,
as design ideas relevant to production use were confirmed.
Differential Revision: https://developer.blender.org/D11536
Reviewed by: Bastien Montagne
|
|
|
|
Differential Revision: https://developer.blender.org/D11056
|
|
|
|
This introduces a context path to the spreadsheet editor, which contains
information about what data is shown in the spreadsheet. The context
path (breadcrumbs) can reference a specific node in a node group
hierarchy. During object evaluation, the geometry nodes modifier checks
what data is currently requested by visible spreadsheets and stores
the corresponding geometry sets separately for later access.
The context path can be updated by the user explicitely, by clicking
on the new icon in the header of nodes. Under some circumstances,
the context path is updated automatically based on Blender's context.
This patch also consolidates the "Node" and "Final" object evaluation
mode to just "Evaluated". Based on the current context path, either
the final geometry set of an object will be displayed, or the data at
a specific node.
The new preview icon in geometry nodes now behaves more like
a toggle. It can be clicked again to clear the context path in an
open spreadsheet editor.
Previously, only an object could be pinned in the spreadsheet editor.
Now it is possible to pin the entire context path. That allows two
different spreadsheets to display geometry data from two different
nodes.
The breadcrumbs in the spreadsheet header can be collapsed by
clicking on the arrow icons. It's not ideal but works well for now.
This might be changed again, if we get a data set region on the left.
Differential Revision: https://developer.blender.org/D10931
|
|
This also fixes the issue that the width of the "Name" column
when viewing instances does not resize correctly.
Differential Revision: https://developer.blender.org/D10926
|
|
A `DataSource` provides columns for the spreadsheet to display.
Every column has a SpreadsheetColumnID as identifier. Columns
are not generated eagerly anymore, instead the main spreadsheet
code can request a column from a data source with an column
identifier. The column identifiers can be stored in DNA and allow us
to store persistent data per column.
On the user level the only thing that changes is that columns are
not shown in alphabetical order anymore. Instead, new columns
are always added on the left. The behavior can be changed,
however I'd prefer not to automate this too much currently. I think
we should just add operators to hide/reorder/resize columns soonish.
Differential Revision: https://developer.blender.org/D10901
|
|
Previously, the spreadsheet editor could only show data of the original
and of the final evaluated object. Now it is possible to show the data
at some intermediate stages too.
For that the mode has to be set to "Node" in the spreadsheet editor.
Furthermore, the preview of a specific node has to be activated by
clicking the new icon in the header of geometry nodes.
The exact ui of this feature might be refined in upcoming commits.
It is already very useful for debugging node groups in it's current
state though.
Differential Revision: https://developer.blender.org/D10875
|
|
This is a minimal, information-only view currently, listing by default
all the override data-blocks, with their user-edited override
properties.
System-generated overrides (like the overrides of pointers to other
override data-blocks) can be shown through a filter option.
Finally, potential info or warning messages from (auto-)resync propcess
are also shown, as an icon + tooltip next to the affected items.
Part of D10855.
|
|
Previously, `node_name` was rarely actually a name of a node. It is set
correctly as node name in `ED_node_tree_push`. However, later on it
was overwritten by the name of an id data block in `node_draw_space`.
Now, the node_name stays the name of the "parent" node. Whereas
display_name is the name that will be displayed in the breadcrumbs.
With this change, the `node_name` can be used to reconstruct the
actual path from the root node tree to the currently visible tree.
Differential Revision: https://developer.blender.org/D10874
|
|
Add option to override current frame whem transforming strip handles.
Option can be found in View menu of VSE preview, or in timeline when
using backdrop.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D10424
|
|
This adds the LineArt grease pencil modifier.
It takes objects or collections as input and generates various grease
pencil lines from these objects with the help of the active scene
camera. For example it can generate contour lines, intersection lines
and crease lines to name a few.
This is really useful as artists can then use 3D meshes to automatically
generate grease pencil lines for characters, enviroments or other
visualization purposes.
These lines can then be baked and edited as regular grease pencil lines.
Reviewed By: Sebastian Parborg, Antonio Vazquez, Matias Mendiola
Differential Revision: http://developer.blender.org/D8758
|
|
- Remove Full Render size from VSE preview size. Use just 100% instead.
- Add Use Proxies checkbox to control whether proxies are used globally
- Move preview size to top so it is most prominent
- Set default to 100% preview size and use proxies
Reviewed By: sergey, fsiddi
Differential Revision: https://developer.blender.org/D10362
|
|
There are two caveats of the current implementation which still need
to be resolved in a separate step:
* In theory the data on the original object can be editable in the spreadsheet.
* If a complex object is in edit mode, and its original data is displayed,
the drawing code can be slow, because the bmesh is converted to a mesh
every time. The proper solution is to draw the data from the bmesh directly.
This should become easier after an upcoming refactor.
Ref T86141.
Differential Revision: https://developer.blender.org/D10701
|
|
This implements the status bar as footer region in the
spreadsheet editor.
It shows the total number of rows and columns as well
as how many rows are actually visible (based on the filter).
The implementation stores the stats in a runtime struct during
drawing and the status bar reads from that struct.
Ref T86142.
Differential Revision: https://developer.blender.org/D10693
|
|
No functional changes.
|
|
Ref T86135.
Differential Revision: https://developer.blender.org/D10681
|
|
This implements the MVP for the new spreadsheet editor (T85879). The functionality
is still very limited, but it proved to be useful already. A more complete picture
of where we want to go with the new editor can be found in T86279.
Supported features:
* Show point attributes of evaluated meshes (no original data, no other domains,
no other geometry types, yet). Since only meshes are supported right now, the
output of the Point Distribute is not shown, because it is a point cloud.
* Only show data for selected vertices when the mesh is in edit mode.
Different parts of Blender keep track of selection state and original-indices with
varying degrees of success. Therefore, when the selected-only filter is used, the
result might be a bit confusing when using some modifiers or nodes. This will
be improved in the future.
* All data is readonly. Since only evaluated data is displayed currently, it has to
be readonly. However, this is not an inherent limitation of the spreadsheet editor.
In the future editable data will be displayed as well.
Some boilerplate code for the new editor has been committed before in
rB9cb5f0a2282a7a84f7f8636b43a32bdc04b51cd5.
It would be good to let the spreadsheet editor mature for a couple of weeks as part
of the geometry nodes project. Then other modules are invited to show their own data
in the new editor!
Differential Revision: https://developer.blender.org/D10566
|
|
Adds toggle to graph editor (View->Show Extrapolation). When disabled,
then fcurves only draw over the keyframe range. For baked fcurves and
ghost fcurves, the range is all sampled points.
It is intended for frequent use so anybody could assign hotkey or add
to quick favorites that's why GE-View is the best place for it.
Show Extrapolation is the default.
Reviewed By: sybren, Stan1, looch
Differential Revision: http://developer.blender.org/D10442
|
|
This adds the initial boilerplate code that is required to introduce
the new spreadsheet editor. The editor is still hidden from the ui.
It can be made visible by undoing the change in `rna_screen.c`.
This patch does not contain any business logic for the spreadsheet editor.
Differential Revision: https://developer.blender.org/D10645
Ref T86279.
|
|
Add an RNA function `activate_asset_by_id(asset_id: ID, deferred: bool)`
to the File Browser space type, which intended to be used to activate an
asset's entry as identified by its `ID *`. Calling it changes the active
asset, but only if the given ID can actually be found.
The activation can be deferred (by passing `deferred=True`) until the
next refresh operation has finished. This is necessary when an asset has
just been added, as it will be loaded by the filebrowser in a background
job.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D10549
|
|
Updates the descriptions and labels for outliner sync in the properties
editor popover to be more clear.
Differential Revision: https://developer.blender.org/D10010
|
|
|
|
The "Current File" asset library didn't get refreshed after the data-block name
changed. But rather than entirely refreshing the file list, or doing possibly
problematic partial refreshes, reference the data-block name directly, so a
simple redraw gets the new name displayed.
Addresses T83751
|
|
This commit moves runtime-only variables from the `SpaceNode`
DNA struct to a private struct in `node_intern.h`. Before, it was hard
to tell which data needed to be saved in files, this should make it
more clear.
Node that the `edittree` field is basically a runtime variable, since
it's set from the `treepath` list on read, but moving it would require
some more invasive changes that I don't think are worth it right now.
Also, not all of the moved variables were explicitly cleared on read--
`aspect` is set at the start of a redraw, `cursor` is set in a region
callback, and `recalc` was used as an update flag.
Differential Revision: https://developer.blender.org/D10141
|
|
Having a centeral place to find a list of all library overrides should be
useful for managing production scenes where library overrides are used a lot.
This change adds the individually overridden properties of a data-block under
the data-block itself. Just how we show modifiers, constraints or pose channels
there. This way we can also expose library override operations/options better
in future.
There's also a filter option for the library overrides now, so they can be
hidden. It is only available in the View Layer display mode though, like the
other filter options.
One internal change this has to do is adding more informative return values to
undo pushes and the library override functions called by it. That way we can
send a notifier when library overrides change for the Outliner to know when to
rebuild the tree.
Differential Revision: https://developer.blender.org/D7631
Reviewed by: Andy Goralczyk, Bastien Montagne, William Reynish
|