Age | Commit message (Collapse) | Author |
|
When weight painting the bone overlay is extremely intrusive,
effectively requiring either extensive use of hiding individual
bones, or disabling the whole bone overlay between selections.
This addresses the issue by adding a bone opacity slider that
is used for the 'wireframe' armature drawing mode. It directly
controls the uniform opacity as a straightforward option.
Differential Revision: https://developer.blender.org/D11804
|
|
|
|
Differentiate doc-strings from title/section text.
Also use explicit doxygen references to struct members
so it's not ambiguous which member is being referenced.
Note that these changes aren't complete (some files weren't touched).
|
|
|
|
Was introduced in rB93a8fd1249f
|
|
There were several places attempting to check to see if scene lights
and world were enabled for display. This tries to find a common place
for both of these to reduce duplication.
Honestly, I couldn't find a really good spot for these and settled on
DRW_engine. It's not the best spot since they're not strictly drawing
related, but let's start here.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D12658
|
|
Addresses T77127 (Controller Drawing).
Adds VR controller visualization and custom drawing via draw
handlers. Add-ons can draw to the XR surface (headset display) and
mirror window by adding a View3D draw handler of region type 'XR' and
draw type 'POST_VIEW'. Controller drawing and custom overlays can be
toggled individually as XR session options, which will be added in a
future update to the VR Scene Inspection add-on.
For the actual drawing, the OpenXR XR_MSFT_controller_model extension
is used to load a glTF model provided by the XR runtime. The model's
vertex data is then used to create a GPUBatch in the XR session
state. Finally, this batch is drawn via the XR surface draw handler
mentioned above.
For runtimes that do not support the controller model extension, a
a simple fallback shape (sphere) is drawn instead.
Reviewed By: Severin, fclem
Differential Revision: https://developer.blender.org/D10948
|
|
This allows a hack to be removed that temporarily overwrote
the 3D views gizmo display flag.
Also reverse change from fb27a9bb983ce74b8d8f5f871cf0706dd1e25051
that runs poll on modal gizmo groups as there is some risk
that the poll function unlinks the gizmo.
|
|
Hiding viewport navigation gizmos caused the UI to "flicker"
unnecessarily, the axis could also be useful as a reference.
Resolves T73684
|
|
Patch for: T37878
{F10169694}
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D11487
|
|
|
|
|
|
This patch fixes many minor spelling mistakes, all in comments or
console output. Mostly contractions like can't, won't, don't, its/it's,
etc.
Differential Revision: https://developer.blender.org/D11663
Reviewed by Harley Acheson
|
|
The depth cache (located in `RegionView3D::depths`) is used for quick
and simple occlusion testing in:
- particle selection,
- "Draw Curve" operator and
- "Interactive Light Track to Cursor" operator,
However, keeping a texture buffer in cache is not a recommended practice.
For displays with high resolution like 8k this represents something
around 132MB.
Also, currently, each call to `ED_view3d_depth_override` invalidates
the depth cache. So that depth is never reused in multiple calls from
an operator (this was not the case in blender 2.79).
This commit allows to create a depth cache and release it in the same
operator. Thus, the buffer is kept in cache for a short time, freeing
up space.
No functional changes.
|
|
This patch improves the 3DView statistics overlay to show LOCAL stats
while in local view. This means the stats can vary between 3DViews and
the statusbar when views are in local view, but this gives a much more
accurate count of the objects, and their components, that you are
directly working with rather than just scene values.
Differential Revision: https://developer.blender.org/D8883
Reviewed by Campbell Barton
|
|
This moves the flash on mode transfer effect option from the overlays to
an operator property of the mode transfer operator.
- This effect is intended to show the target object when no overlays or
a minimal set of overlays is enabled. Making it part of the whole set of
overlays invalidates this use case.
- The effect is not intended to be configurable per viewport, it should
be a global option.
The effect is still implemented using the overlay engine (instead of a
draw modal callback) due to performance and drawing artifacts. Having it
implemented as an overlay with runtime timer data in the objects makes
also possible to run multiple animations at the same time without any
visual glitches.
Reviewed By: campbellbarton, JulienKaspar
Differential Revision: https://developer.blender.org/D11519
|
|
This implements T87633
This overlay renders a flash animation on the target object when
transfering the mode to it using the mode transfer operator.
This provides visual feedback when switching between objects without
extra overlays that affect the general color and lighting in the scene.
Differences with the design task:
- This uses just a fade out animation instead of a fade in/out animation.
The code is ready for fade in/out, but as the rest of the overlays
(face sets, masks...) change instantly without animation, having a fade
in/out effect gives the impression that the object flashes twice (once
for the face sets, twice for the peak alpha of the flash animation).
- The rendering uses a flat color without fresnel for now, but this can
be improved in the future to make it look more like the shader in the
prototype.
- Not enabled by default (can be enabled in the overlays panel), maybe
the defaults can change for 3.0 to disable fade inactive and enable this
instead.
Reviewed By: jbakker, JulienKaspar
Differential Revision: https://developer.blender.org/D11055
|
|
Now `ED_view3d_backbuf_depth_validate`, `ED_view3d_draw_depth` and
`ED_view3d_draw_depth_gpencil` are unified in `ED_view3d_depth_override`.
This new function replaces `ED_view3d_autodist_init`.
Also, since `ED_view3d_depth_update` depends on the render context, and
changing the context is a slow operation, that function also was removed,
and the depth buffer cached is now updated inside the new unified drawing
function when the "bool update_cache" parameter is true.
Finally `V3D_INVALID_BACKBUF` flag has been renamed and moved to
`runtime.flag`.
Differential revision: https://developer.blender.org/D10678
|
|
This patch adds support for AOVs in EEVEE. AOV Outputs can be defined in the
render pass tab and used in shader materials. Both Object and World based
shaders are supported. The AOV can be previewed in the viewport using the
renderpass selector in the shading popover.
AOV names that conflict with other AOVs are automatically corrected. AOV
conflicts with render passes get a warning icon. The reason behind this is that
changing render engines/passes can change the conflict, but you might not notice
it. Changing this automatically would also make the materials incorrect, so best
to leave this to the user.
**Implementation**
The patch adds a copies the AOV structures of Cycles into Blender. The goal is
that the Cycles will use Blenders AOV defintions. In the Blender kernel
(`layer.c`) the logic of these structures are implemented.
The GLSL shader of any GPUMaterial can hold multiple outputs (the main output
and the AOV outputs) based on the renderPassUBO the right output is selected.
This selection uses an hash that encodes the AOV structure. The full AOV needed
to be encoded when actually drawing the material pass as the AOV type changes
the behavior of the AOV. This isn't known yet when the GLSL is compiled.
**Future Developments**
* The AOV definitions in the render layer panel isn't shared with Cycles.
Cycles should be migrated to use the same viewlayer aovs. During a previous
attempt this failed as the AOV validation in cycles and in Blender have
implementation differences what made it crash when an aov name was invalid.
This could be fixed by extending the external render engine API.
* Add support to Cycles to render AOVs in the 3d viewport.
* Use a drop down list for selecting AOVs in the AOV Output node.
* Give user feedback when multiple AOV output nodes with the same AOV name
exists in the same shader.
* Fix viewing single channel images in the image editor [T83314]
* Reduce viewport render time by only render needed draw passes. [T83316]
Reviewed By: Brecht van Lommel, Clément Foucault
Differential Revision: https://developer.blender.org/D7010
|
|
Some DNA headers already did this, most did not. Even though many of them would
be included in C++ files and thus compiled as C++. This would be confusing and
developers may think they have to add `extern "C"` too a whole lot of
(indirect) includes to be able to use a C header in C++.
However, this is a misconception.
`extern "C"` does not cause code to be compiled with C rather than C++! It only
causes the linker to not use C++ function name mangling. See
https://stackoverflow.com/a/1041880.
Because extern DNA headers don't have function declarations, using `extern "C"`
actually should not have any effect. On the other hand, adding it causes no
harm and avoids confusion. So let's just have it consistently in C header
files.
Differential Revision: https://developer.blender.org/D9578
Reviewed by: Bastien Montagne, Sybren Stüvel
|
|
This patch adds an opacity slider to the wireframe overlay. The previous
wireframe in dense geometry scenes could be too dark and sometimes the
user just wants an impression of the geometry during modelling.
Reviewed By: Jeroen Bakker
Differential Revision: https://developer.blender.org/D7622
|
|
This implements a new overlay that blends the bakground color over the
objects that are not in the same mode as the active object, making
them fade with the background.
This is especially needed for sculpt mode as there is no other overlay
or indication in the viewport to display which object is active.
This is intended to be used with D7510 in order to have a faster
workflow when sculpting models with multiple objects.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D8679
|
|
This adds an option for the HDRI rotation to follow the view rotation.
When this option is enabled, this allows EEVEE materials to be used as
matcaps for sculpting and painting.
This has an extra performance cost when orbiting around the model as the
lookdev cache needs to be recalculated, but in my test it is barely
noticeable.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D8566
|
|
This replaces header include guards with `#pragma once`.
A couple of include guards are not removed yet (e.g. `__RNA_TYPES_H__`),
because they are used in other places.
This patch has been generated by P1561 followed by `make format`.
Differential Revision: https://developer.blender.org/D8466
|
|
Addresses 964305 from Debian bug tracker.
|
|
When editing a complex curve is very annoying to have all handles at a time. Also, this is a requirement for the current GSoC Edit Grease Pencil using curves.
I have seen that this improvement can be used in any other area of blender, so I have decided to publish the option in the overlay panel..
Reviewed By: fclem, #user_interface, billreynish, Severin
Differential Revision: https://developer.blender.org/D7754
|
|
|
|
Causes unexpected behavior when adding new flags.
|
|
In some situations is good to have a grid visible anot beeing occulde by meshes.
By default is OFF.
Differential Revision: https://developer.blender.org/D7721
|
|
This reverts commit fd025b0b7a46c5e56f348b73cf989c6bbddec707.
|
|
In some situations is good to have a grid visible anot beeing occulde by meshes.
By default is OFF.
Differential Revision: https://developer.blender.org/D7721
|
|
Removes statistics from footer and to an (optional) overlay in 3DView.
Differential Revision: https://developer.blender.org/D7410
Reviewed by Campbell Barton
|
|
|
|
|
|
NOTE: While most of the milestone 1 goals are there, a few smaller features and
improvements are still to be done.
Big picture of this milestone: Initial, OpenXR-based virtual reality support
for users and foundation for advanced use cases.
Maniphest Task: https://developer.blender.org/T71347
The tasks contains more information about this milestone.
To be clear: This is not a feature rich VR implementation, it's focused on the
initial scene inspection use case. We intentionally focused on that, further
features like controller support are part of the next milestone.
- How to use?
Instructions on how to use this are here:
https://wiki.blender.org/wiki/User:Severin/GSoC-2019/How_to_Test
These will be updated and moved to a more official place (likely the manual) soon.
Currently Windows Mixed Reality and Oculus devices are usable. Valve/HTC
headsets don't support the OpenXR standard yet and hence, do not work with this
implementation.
---------------
This is the C-side implementation of the features added for initial VR
support as per milestone 1. A "VR Scene Inspection" Add-on will be
committed separately, to expose the VR functionality in the UI. It also
adds some further features for milestone 1, namely a landmarking system
(stored view locations in the VR space)
Main additions/features:
* Support for rendering viewports to an HMD, with good performance.
* Option to sync the VR view perspective with a fully interactive,
regular 3D View (VR-Mirror).
* Option to disable positional tracking. Keeps the current position (calculated
based on the VR eye center pose) when enabled while a VR session is running.
* Some regular viewport settings for the VR view
* RNA/Python-API to query and set VR session state information.
* WM-XR: Layer tying Ghost-XR to the Blender specific APIs/data
* wmSurface API: drawable, non-window container (manages Ghost-OpenGL and GPU
context)
* DNA/RNA for management of VR session settings
* `--debug-xr` and `--debug-xr-time` commandline options
* Utility batch & config file for using the Oculus runtime on Windows.
* Most VR data is runtime only. The exception is user settings which are saved
to files (`XrSessionSettings`).
* VR support can be disabled through the `WITH_XR_OPENXR` compiler flag.
For architecture and code documentation, see
https://wiki.blender.org/wiki/Source/Interface/XR.
---------------
A few thank you's:
* A huge shoutout to Ray Molenkamp for his help during the project - it would
have not been that successful without him!
* Sebastian Koenig and Simeon Conzendorf for testing and feedback!
* The reviewers, especially Brecht Van Lommel!
* Dalai Felinto for pushing and managing me to get this done ;)
* The OpenXR working group for providing an open standard. I think we're the
first bigger application to adopt OpenXR. Congratulations to them and
ourselves :)
This project started as a Google Summer of Code 2019 project - "Core Support of
Virtual Reality Headsets through OpenXR" (see
https://wiki.blender.org/wiki/User:Severin/GSoC-2019/).
Some further information, including ideas for further improvements can be found
in the final GSoC report:
https://wiki.blender.org/wiki/User:Severin/GSoC-2019/Final_Report
Differential Revisions: D6193, D7098
Reviewed by: Brecht Van Lommel, Jeroen Bakker
|
|
|
|
This commit is a full refactor of the grease pencil modules including Draw Engine, Modifiers, VFX, depsgraph update, improvements in operators and conversion of Sculpt and Weight paint tools to real brushes.
Also, a huge code cleanup has been done at all levels.
Thanks to @fclem for his work and yo @pepeland and @mendio for the testing and help in the development.
Differential Revision: https://developer.blender.org/D6293
|
|
Added the core enums that workbench draw engine uses.
|
|
Motivation the functions get 3 different kind of flag parameters (ImBuf,
DrawType, OffscreenRendering) the naming of the flags were not clear,
leading to mistakes and unnecessary time spend debugging.
|
|
Face Sets are the new system to control the visibility state of the mesh in sculpt and paint modes. They are designed to work in modes where brushes are the primary way of interaction and they provide much more control when working with meshes with complex shapes and overlapping surfaces.
This initial commit includes:
- Sculpt Face Sets data structures and PBVH rendering.
- Face Set overlay and opacity controls.
- Sculpt Undo support.
- Remesher reprojection support. The visibility state of the mesh is also preserved when remeshing.
- Automasking and Mesh filter support.
- Mask expand operator mode to expand Face Sets (Shift + W) and flood fill areas by connectivity (press Ctrl while expanding).
- Sculpt Mode Face Sets and Visibility API.
- Sculpt Face Sets creation and visibility management operators.
- Operator to randomize the Face Sets colors.
- Draw Face Sets brush tool to create and edit the Face Sets. Drawing on the mesh creates a new Face Set. Pressing Ctrl before drawing modifies the Face Set under the brush at the beginning of the stroke.
- Updated keymap and menu to work with Face Sets from Sculpt Mode (H to toggle visibility, Alt + H to show all, Shit + H to hide).
- Pie menu on the W key with Face common Sets operations.
Know limitations:
- Multires support. The Face Sets and Visibility API needs to be implemented for Multires.
Reviewed By: jbakker, #user_interface, Severin
Differential Revision: https://developer.blender.org/D6070
|
|
This is using the GGX probe as background. This has the drawback of
having the resolution choosed in the indirect lighting setting.
The blurring is not really high-quality.
The pros is that it has a simple implementation and is fast to evaluate.
This patch also fades the background alpha to make overlay engine draw the
default background color in the correct color space. Removing one colorspace
hack.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6895
|
|
Previously any of the named views could not have any roll,
this commit supports roll as long as it's axis-aligned (90,180,270 deg).
This is useful for snapping to views,
an improvement on cebd025e02f11.
|
|
Viewport: Disable Clipping For EEVEE and External Renderers
Currently it is possible that, when using viewport clipping, the display and tools communicate
different information to the user then the renderer does. The reason is
that the renderer does not support viewport clipping. Both EEVEE and
Cycles do not support it.
This patch will disable the clipping in all the tools and drawing code
when the viewport drawing mode is `Material Preview` or `Rendered`.
This patch introduces a `RV3D_CLIPPING_ENABLED` util that checks if
clipping is enabled for the given `rv3d` and `v3d`. Also in places where
it was needed we added the `ViewContext` as a carrier for the `View3D`
and `RegionView3D`.
There are a few areas in the tooling (select, projection painting) that
still needs to be tackled after this patch.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6047
|
|
This patch will allow the user to select the EEVEE renderpass to be
shown in the viewport by default the combined pass will be shown.
Limitations:
* Viewport rendering stores the result in a `RenderResult`. RenderResult
is not aware of the type of data it holds. In many places where RenderResult
is used it is assumed that it stores a combined pass and the display+view
transform are applied.
I will propose to fix this in a future patch. But that is still being
designed and discussed.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6319
|
|
|
|
This mostly happens automatically anyway since there is usually not enough
time left over for it. But when it does it happen it breaks partial redraw,
and may also have a negative impact on responsiveness.
Ref T70295
|
|
Support per-viewport collection visibility options.
Note 1: There is no way to show a collection that was not visible before
due to depsgraph. Otherwise we would risk having all the collections in
the depsgraph and I believe this is not the idea.
An alternative would be to have a new depsgraph for viewports that are
not local. Something to keep in mind if we do per-viewport current frame
in the future.
So for now what we do is to only allow collections visibility to be
disabled/hidden in this mode.
Note 2: hide_viewport (the eye icon) doesn't really matter for
depsgraph. So after the merge we can still ignore it to show the
collections locally in a viewport with no problems for the depsgraph.
Reviewers: brecht, sergey
Subscribers: billreynish
Related task: T61327
Differential Revision: https://developer.blender.org/D5611
|
|
This change allows the user to select a renderpass in the 3d viewport.
Added support for external renderers to extend the `View3DShading` struct.
This way Blender doesn't need to know the features an external render engine wants to support.
Note that the View3DShading is also available in the scene->display.shading; although this is
supported, it does not make sense for render engines to put something here as it is really
scene/workbench related.
Currently cycles assumes that it always needs to calculate the combined pass; it ignores the
`pass_flag` in KernelFilm. We could optimize this but that was not in scope of this change
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5689
|
|
Before, it was only possible to fade the active object. The new option allows to fade all non gpencil selected object. This is a common request by artists.
{F7719513}
Reviewers: mendio, pepeland
Reviewed By: mendio
Differential Revision: https://developer.blender.org/D5704
|
|
Add option to change the Intensity of the HDRI in the 3d viewport. This works for both EEVEE and Cycles
Reviewed By: brecht, fclem
Differential Revision: https://developer.blender.org/D5674
|