Age | Commit message (Collapse) | Author |
|
|
|
|
|
Strip unindented comment blocks - mainly headers to avoid conflicts.
|
|
|
|
- Use a single undo history for all operations.
- UndoType's are registered and poll the context to check if they
should be used when performing an undo push.
- Mode switching is used to ensure the state is correct before
undo data is restored.
- Some undo types accumulate changes (image & text editing)
others store the state multiple times (with de-duplication).
This is supported by checking UndoStack.mode `ACCUMULATE` / `STORE`.
- Each undo step stores ID datablocks they use with utilities to help
manage restoring correct ID's.
Needed since global undo is now mixed with other modes undo.
- Currently performs each undo step when going up/down history
Previously this wasn't done, making history fail in some cases.
This can be optimized to skip some combinations of undo steps.
grease-pencil is an exception which has not been updated
since it integrates undo into the draw-session.
See D3113
|
|
Wrapps keymap poll, no functional changes.
|
|
|
|
This moves window overlay from hard coded flags into drawing callbacks.
It also supports snapping (holding Ctrl).
|
|
Practically all access to enum data is read-only.
|
|
prefs.
Now store the multisample setting each window was created with.
|
|
Definitions could shadow local vars.
|
|
This is a kind of sloppy-focus,
resolving long standing bug with loop-cut/knife/ruler /w quad-view.
Where activating a tool would lock onto one of quad-views,
especially problematic when activating from the toolbar or menus.
|
|
Term pointer is overloaded already.
|
|
Our current keymap doesn't give us enough room to make such changes in
the event system. To fix small issues caused by this, we would need to do
drastic changes in Blender's keymaps and internal handling. It was worth
a try, but it didn't work.
I can write down a more descriptive statement in a few days, but for now
I need a break of this stuff.
|
|
Official Documentation:
http://www.blender.org/manual/render/workflows/multiview.html
Implemented Features
====================
Builtin Stereo Camera
* Convergence Mode
* Interocular Distance
* Convergence Distance
* Pivot Mode
Viewport
* Cameras
* Plane
* Volume
Compositor
* View Switch Node
* Image Node Multi-View OpenEXR support
Sequencer
* Image/Movie Strips 'Use Multiview'
UV/Image Editor
* Option to see Multi-View images in Stereo-3D or its individual images
* Save/Open Multi-View (OpenEXR, Stereo3D, individual views) images
I/O
* Save/Open Multi-View (OpenEXR, Stereo3D, individual views) images
Scene Render Views
* Ability to have an arbitrary number of views in the scene
Missing Bits
============
First rule of Multi-View bug report: If something is not working as it should *when Views is off* this is a severe bug, do mention this in the report.
Second rule is, if something works *when Views is off* but doesn't (or crashes) when *Views is on*, this is a important bug. Do mention this in the report.
Everything else is likely small todos, and may wait until we are sure none of the above is happening.
Apart from that there are those known issues:
* Compositor Image Node poorly working for Multi-View OpenEXR
(this was working prefectly before the 'Use Multi-View' functionality)
* Selecting camera from Multi-View when looking from camera is problematic
* Animation Playback (ctrl+F11) doesn't support stereo formats
* Wrong filepath when trying to play back animated scene
* Viewport Rendering doesn't support Multi-View
* Overscan Rendering
* Fullscreen display modes need to warn the user
* Object copy should be aware of views suffix
Acknowledgments
===============
* Francesco Siddi for the help with the original feature specs and design
* Brecht Van Lommel for the original review of the code and design early on
* Blender Foundation for the Development Fund to support the project wrap up
Final patch reviewers:
* Antony Riakiotakis (psy-fi)
* Campbell Barton (ideasman42)
* Julian Eisel (Severin)
* Sergey Sharybin (nazgul)
* Thomas Dinged (dingto)
Code contributors of the original branch in github:
* Alexey Akishin
* Gabriel Caraballo
|
|
Design task: T42339
Differential Revision: D840
Initial implementation proposal: T41867
Short description:
With this we can distinguish between holding and tabbing a key. Useful
is this if we want to assign to operators to a single shortcut. If two
operators are assigned to one shortcut, we call this a sticky key.
More info is accessible through the design task and the diff.
A few people that were involved with this:
* Sean Olson for stressing me with this burden ;) - It is his enthusiasm
that pushed me forward to get this done
* Campbell and Antony for the code and design review
* Ton for the design review
* All the other people that gave feedback on the patch and helped to
make this possible
A big "Thank You" for you all!
|
|
|
|
Original patch by @random (D765) with some minor work done by @campbell
and me.
At this place, I'd like call out a number of people who were involved and
deserve a big "Thank you!":
* At the first place @randon who developed and submitted the patch
* The Blendercn community which helped a lot with testing - espacially
* @yuzukyo, @leon_cheung and @kjym3
* @campbellbarton, @mont29 and @sergey for their help and advises during
* review
* @ton who realized the importance of this early on and asked me for
* reviewing
We are still not finished, as this is only the first part of the
implementaion, but there's more to come!
|
|
Operators that trigger UI events (but nothing else)
were using 'CANCELLED' making it impossible to tell if an invoke
function failed, or opened a menu.
|
|
This commit adds a confirm threshold property to pie menus.
Basically, this will confirm the pie menu automatically when
the distance from the center of the pie exceeds that threshold without
a need to release the pie button.
The confirm threshold will only work if it is larger than the pie
threshold.
The confirmation actually occur when the mouse stops moving, to
allow multiple pie menus to be better linked together, (see below)
This functionality also facilitates the ability for chained pie menus by
dragging. Basically, a pie menu item can be a call_menu_pie operator and
the new pie menu will still use the original pie menu release event for
confirmation. This should allow for quick, gesture based navigation in
pie menu hierarchies (going back in the hierarchy is still not supported
though)
There will be a demonstration pie in the official add-on soon
|
|
Added function called WM_set_locked_interface which does
two things:
- Prevents event queue from being handled, so no operators
(see below) or values are even possible to run or change.
This prevents any kind of "destructive" action performed
from user while rendering.
- Locks interface refresh for regions which does have lock
set to truth in their template. Currently it's just a 3D
viewport, but in the future more regions could be considered
unsafe, or we could want to lock different parts of
interface when doing different jobs.
This is needed because 3D viewport could be using or changing
the same data as renderer currently uses, leading to threading
conflict.
Notifiers are still allowed to handle, so render progress is
seen on the screen, but would need to doublecheck on this, in
terms some notifiers could be changing the data.
For now interface locking happens for render job only in case
"Lock Interface" checkbox is enabled.
Other tools like backing would also benefit of this option.
It is possible to mark operator as safe to be used in locked
interface mode by adding OPTYPE_ALLOW_LOCKED bit to operator
template flags.
This bit is completely handled by wm_evem_system, not
with operator run routines, so it's still possible to
run operators from drivers and handlers.
Currently allowed image editor navigation and zooming.
Reviewers: brecht, campbellbarton
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D142
|
|
Remove KeyMap mode from outliner, was an old half-finished features redondant with user preferences settings...
Also moved key map item's "event type to map type" and map type defines at WM level, this is too much generic to be at RNA level.
Also added a check in versionning code to convert all outdated outliner modes to a valid one (seems old 'verse' ones were not handled as well).
Thanks to Brecht for reviews and advices!
|
|
|
|
when running viewport operations with exec() rather then invoke(), perform the action immediately rather then using smoothview.
makes viewport operations usable from python scripts.
|
|
next will add context so bpy.data.xxx[id] are not used for all references.
|
|
BLI_assert() on debug builds.
|
|
normalise->normalize).
|
|
|
|
|
|
|
|
without the underscores these clogged up the namespace for autocompleation which was annoying.
|
|
This commit extends limit of ID and objects to 64 (it means 63 meaning
characters and 1 for zero-terminator). CustomData layers names are also
extended.
Changed DNA structures and all places where length constants were hardcoded.
All names which are "generating" from ID block should be limited by MAX_ID_NAME-2,
all non-id names now has got own define called MAX_NAME which should be used all
over for non-id names to make further name migration stuff easier.
All name fields in DNA now have comment with constant which corresponds to
hardcoded numeric value which should make it easier to further update this
limits or even switch to non-hardcoded values in DNA.
Special thanks to Campbell who helped figuring out some issues and helped a lot
in finding all cases where hardcoded valued were still used in code.
Both of forwards and backwards compatibility is stored with blender versions newer
than January 5, 2011. Older versions had issue with placing null-terminator to
DNA strings on file load which will lead to some unpredictable behavior or even
crashes.
|
|
|
|
http://markmail.org/message/fp7ozcywxum3ar7n
|
|
|
|
|
|
Diff Keymaps
User edited keymaps now no longer override the builtin keymaps entirely, but
rather save only the difference and reapply those changes. This means they can
stay better in sync when the builtin keymaps change. The diff/patch algorithm
is not perfect, but better for the common case where only a few items are changed
rather than entire keymaps The main weakness is that if a builtin keymap item
changes, user modification of that item may need to be redone in some cases.
Keymap Editor
The most noticeable change here is that there is no longer an "Edit" button for
keymaps, all are editable immediately, but a "Restore" buttons shows for keymaps
and items that have been edited. Shortcuts for addons can also be edited in the
keymap editor.
Addons
Addons now should only modify the new addon keyconfiguration, the keymap items
there will be added to the builtin ones for handling events, and not get lost
when starting new files. Example code of register/unregister:
km = wm.keyconfigs.addon.keymaps.new("3D View", space_type="VIEW_3D")
km.keymap_items.new('my.operator', 'ESC', 'PRESS')
km = wm.keyconfigs.addon.keymaps["3D View"]
km.keymap_items.remove(km.keymap_items["my.operator"])
Compatibility
The changes made are not forward compatible, i.e. if you save user preferences
with newer versions, older versions will not have key configuration changes that
were made.
|
|
Patch to make the radial control more generic with RNA. Patch was
reviewed here: http://codereview.appspot.com/4280080/
Prior to this update, the radial control code in trunk had generic
parts of the radial control implemented as an incomplete operator
within WM. Then each different user of the radial control had to
implement a separate operator to actually pass in specific brush data
-- e.g. sculpt's brush size, vpaint's brush size, etc.
This patch removes all the extra operators and makes the WM operator
do everything. It now takes several RNA path strings as its properties
-- the only required property is data_path, which specifies the data
to be modified by the radial control. The other paths affect display
in various ways, e.g. rotation, color, etc.
In addition to decreasing some duplicate paint brush code, these
updates make it pretty easy to enable radial control for other
purposes (and it can be set up entirely though python or keymaps, no
extra C code needed.)
|
|
loopcut now follows 'Release confirms' user preference.
|
|
Recommitted eltopo collision code (but disabled by default)
with Genscher's permission.
To use, you need to install liblapack and libblas
|
|
errors.
eg:
- console calls operator
- operator calls report
- report went into header rather them back into the console as an error.
|
|
documentation done.
|
|
"Modal cursors" now remain visible, until reset. These cursors
were reset already on edges. Example: 3d view toolbar, grease
pencil. Do note, only use WM_cursor_modal() on real modal tools,
and restore it at end.
|
|
|
|
keymap item id for user defined keymaps wasn't defined properly. This is really old, I'm surprised with didn't catch this before.
|
|
'const char's,.
Only one functional change where Transform orientations passed "" to BIF_createTransformOrientation() which could then have the value written into.
|
|
|
|
|
|
https://svn.blender.org/svnroot/bf-blender/branches/soc-2010-jwilkins
See log of that branch for details.
|
|
* Now it displays the last report from the global list, not just from operators
* Rather than disappearing when a new operator is run, it stays until it times
out or a new report is added
* Fun animated transitions ;)
http://mke3.net/blender/devel/2.5/reports_header.mov
Now need to investigate report usage with popups. Ideally we can have most
reports non-blocking, so they're less intrusive, only popping up for dire errors.
Problem is many things in Blender right now are marked as RPT_ERROR
when probably RPT_WARNING is more appropriate. Should probably keep
RPT_ERROR for things that demand immediate attention.
|