| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
Support custom-data correction based on surrounding geometry for all
transformation modes of the mesh transform operators.
The is the same logic used in Vert and Edge Slide.
In order not to change the current default behavior,
this property does not affect Vert and Edge Slide modes.
|
|
This option allows posing meshes with different disconnected elements
using the Pose Brush.
This is achieved by doing the following:
- Creating an ID per vertex that stores the connected component of that vertex.
- By using those IDs, one fake topology connection is created per vertex to the nearest vertex in a different ID. The maximum distance to create that connection is determined by the "Max Element Distance" property. These fake connectivity neighbors are used in the Sculpt API functions iterators, so all the algorithms of the Pose Brush can run without modifications as if everything was part of the same mesh.
In order to make this work, the "Connected only" property of the Pose Brush needs to be disabled. This will add an extra performance cost to the Pose Brush and its preview. To achieve optimal results, max element distance should be as low as possible.
Reviewed By: sergey, campbellbarton
Differential Revision: https://developer.blender.org/D7282
|
|
|
|
|
|
IDs like embedded ones (master collections, root node trees) cannot be
linked, and thus cannot be real override themselves.
Since they are managed by their owner ID, that one will also have the
overrides for their locally edited properties.
We still need a way to mark them as overridden though, for various UI
and override-internal purposes, this is done using a new ID flag.
Note that since Shae Keys are not linkable, and their pointers are not
editable in RNA, they are also considered as embedded from override
point of view.
|
|
Allows to pass const pointers without getting complains from the
compiler.
|
|
The shortcuts act on the modifier with its panel under the mouse.
The following shortcuts are enabled by default:
- Remove modifier: X, Delete
- Apply modifier: Ctrl A
- Duplicate modifier: Shift D
More shortcuts can be added in the keymap.
Each panel can now store a custom data RNA pointer, and a new
function is added to get the custom data for the panel under the
cursor. This custom data could be used to refactor the "List Panel
System" to generalize it and integrate it further with RNA.
The same functionality will be added in further commits where it
applies to constraints, grease pencil modifiers, and effects.
Differential Revision: https://developer.blender.org/D8031
|
|
Threaded Sculpt is now always enabled by default. If it causes
performance problems compared single threaded sculpt it should be
considered a bug.
Reviewed By: sergey
Maniphest Tasks: T77638
Differential Revision: https://developer.blender.org/D7960
|
|
|
|
|
|
Previously you'd have to run with --debug-value 256, now just make it
a preference so the Debug panel can be always available for developers.
|
|
|
|
Under the hood the CurveProfile widget (used for bevel custom profiles)
uses a bezier curve, but right now though it only supports two of the
bezier curve handle types, vector and auto. This patch adds support for
free handles and adds all of the logic for editing them.
This is the first step to the ability to import and export curve objects
in the widget.
There's some code cleanup in curveprofile.c. Movement for handles and
control points is abstracted to functions there rather than happening
in interface_handlers.c.
An "Apply Preset" button is also added, which solves a confusing issue
where you apply a preset, then change the number of samples and the
preset doesn't change. The button makes it clear that the preset needs
to be reapplied.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D6470
|
|
This commit makes uses of the new OpenVDB IO in Mantaflow (introduced in 781f783a66ac).
From now on, fluid cache files in OpenVDB format will contain a list of grids per frame (before: one .vdb file per grid per frame). Besides regular grids, particle systems are also stored using OpenVDBs PointGrid data structures.
All older cache formats will remain fully functional:
- Uni caches (.uni) files are still available from the UI and can be used as before
- Raw caches (.raw) are no longer available from the UI, but loading them is still possible
- Old OpenVDB caches (one .vdb per grid) can no longer be baked either, but loading them is still possible.
It is also no longer possible to choose file formats for 'Noise' and 'Particles'. Instead there are now options to set the file format for 'Volumetric' and for 'Mesh' data.
Known issues (planned to be resolved soon):
- OpenVDB files are currently not taking into consideration the clipping value (FluidDomainSettings). Empty cells are therefore being written too. Depending on the scene, this can make file sizes unnecessarily large.
- Domains are not being exported at their world position. Instead they are always clipped to the origin.
|
|
Related to T78153
Differential Revision: https://developer.blender.org/D8100
|
|
Sculpt Vertex Colors is a painting system that runs inside sculpt mode, reusing all its tools and optimizations. This provides much better performance, easier to maintain code and more advanced features (new brush engine, filters, symmetry options, masks and face sets compatibility...). This is also the initial step for future features like vertex painting in Multires and brushes that can sculpt and paint at the same time.
This commit includes:
- SCULPT_UNDO_COLOR for undo support in sculpt mode
- SCULPT_UPDATE_COLOR and PBVH flags and rendering
- Sculpt Color API functions
- Sculpt capability for sculpt tools (only enabled in the Paint Brush for now)
- Rendering support in workbench (default to Sculpt Vertex Colors except in Vertex Paint)
- Conversion operator between MPropCol (Sculpt Vertex Colors) and MLoopCol (Vertex Paint)
- Remesher reprojection in the Voxel Remehser
- Paint Brush and Smear Brush with color smoothing in alt-smooth mode
- Parameters for the new brush engine (density, opacity, flow, wet paint mixing, tip scale) implemented in Sculpt Vertex Colors
- Color Filter
- Color picker (uses S shortcut, replaces smooth)
- Color selector in the top bar
Reviewed By: brecht
Maniphest Tasks: T72866
Differential Revision: https://developer.blender.org/D5975
|
|
This revisit the render pipeline to support time slicing for better motion
blur.
We support accumulation with or without the Post-process motion blur.
If using the post-process, we reuse last step next motion data to avoid
another scene reevaluation.
This also adds support for hair motion blur which is handled in a similar
way as mesh motion blur.
The total number of samples is distributed evenly accross all timesteps to
avoid sampling weighting issues. For this reason, the sample count is
(internally) rounded up to the next multiple of the step count.
Only FX Motion BLur: {F8632258}
FX Motion Blur + 4 time steps: {F8632260}
FX Motion Blur + 32 time steps: {F8632261}
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D8079
|
|
To make a better distinction with region overlay.
|
|
This replaces the cmake options `WITH_NEW_OBJECT_TYPES` and
`WITH_NEW_SIMULATION_TYPE` with two experimental userpref settings:
* `use_new_particle_system`: Enables the point cloud type and the simulation editor.
* `use_new_hair_type`: Only displays the add-operator in the add menu for now.
Note, in the current state you can't do anything productive with the new particle
system or the new hair type. Features will be added step by step in the upcoming
weeks and months.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D8096
|
|
Also update/correct some of the comments.
|
|
This isn't needed and wasn't properly updated when new-lines were added.
|
|
This will allow the easier addition of a constant radius mode in the
future and some changes in the UI to mirror the recent similar change
from "Only Vertices" to the "Affect" enum.
|
|
Using 'name' for the full path of a file reads badly,
especially when id.name is used in related code.
|
|
Make it clear that this is the absolute path,
allow the 'name' to be renamed to 'filepath'.
Rename is safe since this is only for run-time.
|
|
This feature was removed by error during the refactor done in draw engine.
Differential Revision: https://developer.blender.org/D8082
|
|
Walk navigation used a separate flag to select the element. This is
because activation and mode toggling were connected until rB702e00f91088
cleaned up the selection logic.
Now walk navigation can activate objects and other elements without
changing modes. This also addresses renaming in the outliner which
did renaming from the active element, not the walk element.
|
|
This mode is like Percent, but measures absolute distance along
adjacent edges instead of a percentage.
So, for example, if you use this mode with 2 segments and profile=1,
you will see the length that the bevel moves along unbeveled edges
between beveled ones will match the value specified.
Many users seem to expect this behavior, even though it means the
bevel width is uneven, so this option is for them.
|
|
This patch implements the list panel system D7490 for grease pencil
shader effects. It also moves their drawing to a callback in
ShaderFxTypeInfo in line with the extensible architecture refactoring
goal T75724.
The implementation is basically exactly the same as for the modifier
patch (9b099c86123fc82).
Thanks to Matias Mendiola (@mendio) for helping to develop the layout
changes.
Differential Revision: https://developer.blender.org/D7985
|
|
This patch implements the list panel system D7490 for grease pencil
modifiers. It also moves their drawing to a callback in
GpencilModifierTypeInfo in line with the extensible architecture
refactoring goal T75724.
This also adds the "set_error" function for grease pencil modifiers,
which hadn't been copied from mesh modifiers yet.
The implementation is basically exactly the same as for the modifier
patch (9b099c86123fc82).
Thanks to Matias Mendiola (mendio) for providing mockups for many
of the layout changes.
Differential Revision: https://developer.blender.org/D7978
|
|
This patch implements the list panel system D7490 for constraints.
In this case the panels are still defined in Python.
The layouts are also updated to use subpanels and the a more organized
single column layout. There may be more tweaks necessary for the
layouts.
Reviewed By: Severin, billreynish, Mets
Differential Revision: https://developer.blender.org/D7499
|
|
This adds object motion blur vectors for EEVEE as well as better noise
reduction for it.
For TAA reprojection we just compute the motion vector on the fly based on
camera motion and depth buffer. This makes possible to store another motion
vector only for the blurring which is not useful for TAA history fetching.
Motion Data is saved per object & per geometry if using deformation blur.
We support deformation motion blur by saving previous VBO and modifying the
actual GPUBatch for the geometry to include theses VBOs.
We store Previous and Next frame motion in the same motion vector buffer
(RG for prev and BA for next). This makes non linear motion blur (like
rotating objects) less prone to outward/inward blur.
We also improve the motion blur post process to expand outside the objects
border. We use a tile base approach and the max size of the blur is set via
a new render setting.
We use a background reconstruction method that needs another setting
(Background Separation).
Sampling is done using a fixed 8 dithered samples per direction. The final
render samples will clear the noise like other stochastic effects.
One caveat is that hair particles are not yet supported. Support will
come in another patch.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7297
|
|
Currently all force effectors can only act on cloth when the force is
perpendicular to the surface. This makes sense for wind, but not for
other forces; and the user may want even wind to have some friction.
This changes effector code to output two force vectors - although
you of course can pass the same pointer for both. The force is split
between the two outputs based on a new per-effector setting.
Differential Revision: https://developer.blender.org/D8017
|
|
Function used int for everything.
|
|
|
|
This commit adds a new model to the Sky Texture node, which is based on a
method by Nishita et al. and works by basically simulating volumetric
scattering in the atmosphere.
By making some approximations (such as only considering single scattering),
we get a fairly simple and fast simulation code that takes into account
Rayleigh and Mie scattering as well as Ozone absorption.
This code is used to precompute a 512x128 texture which is then looked up
during render time, and is fast enough to allow real-time tweaking in the
viewport.
Due to the nature of the simulation, it exposes several parameters that
allow for lots of flexibility in choosing the look and matching real-world
conditions (such as Air/Dust/Ozone density and altitude).
Additionally, the same volumetric approach can be used to compute absorption
of the direct sunlight, so the model also supports adding direct sunlight.
This makes it significantly easier to set up Sun+Sky illumination where
the direction, intensity and color of the sun actually matches the sky.
In order to support properly sampling the direct sun component, the commit
also adds logic for sampling a specific area to the kernel light sampling
code. This is combined with portal and background map sampling using MIS.
This sampling logic works for the common case of having one Sky texture
going into the Background shader, but if a custom input to the Vector
node is used or if there are multiple Sky textures, it falls back to using
only background map sampling (while automatically setting the resolution to
4096x2048 if auto resolution is used).
More infos and preview can be found here:
https://docs.google.com/document/d/1gQta0ygFWXTrl5Pmvl_nZRgUw0mWg0FJeRuNKS36m08/view
Underlying model, implementation and documentation by Marco (@nacioss).
Improvements, cleanup and sun sampling by @lukasstockner.
Differential Revision: https://developer.blender.org/D7896
|
|
Main change from user side, besides that all pointers should now be
properly remapped to new IDs, is that linked objects are no longer
preserved when doing a full copy of scenes.
Will open a task to check whether we actually still want that behavior
(and re-code it in a more correct way then).
This is the main part of work done here, it aims at uniformizing and
sanitizing that 'deep copy' process for supported IDs (currently scenes,
collections and objects).
Note that there will be more follow up commits after that one, but this
should be the most risky and changing one.
|
|
Adding volume obdata option to `eDupli_ID_Flags` enum made it go beyond
the 16 bits of a short... Also, enums should typically be stored in
unsigned integers.
|
|
Some of the files were (indirectly) using dna_type_offsets.h without
adding dependency from bf_dna (which is needed to ensure the file is
generated prior to library compilation).
|
|
|
|
|
|
This is actually a nice issue due to too much optimization...
* Making an ID local just reuse the linked one whenever possible, instead of
actually making a copy of it.
* Therefore, the collection containing that ID is seen as unchanged, since
the pointer itself remained the same.
* But on undo step, there is no way to reuse that local object, which then
gets deleted, and linked one gets re-created - at a different address.
* Collection, however, since unchanged, is not updated at all and thus keeps
reference to the to-be-deleted local object, instead of the linked one.
* Issue gets even worse with viewlayers, this leads to the crash.
To address this, this patch adds a 'virtual' update flags that does nothing
in update case, but will ensure that the affected IDs using the one made local
are properly detected as changed across the relevant undo step.
Note that the recalc flags were chosen mostly for a logical reason, and also
because they are already properly dealt with and cleared by undo code,
so this looks like the optimal solution.
Reviewed By: brecht
Maniphest Tasks: T77774
Differential Revision: https://developer.blender.org/D8006
|
|
|
|
|
|
|
|
|
|
|
|
Now all overrides are handled that way. Performances of the process look
decent enough, even with production characters...
If performance issues still arise, we'll investigate other solutions.
This should also make T73154 obsolete now.
|
|
When a fluid is put under influence of gravity or acceleration, it
forms an internal pressure gradient, which causes observable effects
like buoyancy. Since now cloth has support for simulating pressure
changes caused by fluid compression or expansion, it makes sense to
also support the effects of gravity.
This is intended for better simulation of objects filled or
surrounded by fluids, especially when constrained by collisions
or pinned vertices, and should result in more realistic shapes.
Obviously, this doesn't actually simulate fluid dynamics; instead
it is assumed that the fluid immediately adapts to changes in the
shape or acceleration of the object without friction or turbulence,
and instantly reaches a new static equilibrium.
Differential Revision: https://developer.blender.org/D6442
|
