| Age | Commit message (Collapse) | Author |
|---|
|
This commit renames enums related the "Curve" object type and ID type
to add `_LEGACY` to the end. The idea is to make our aspirations clearer
in the code and to avoid ambiguities between `CURVE` and `CURVES`.
Ref T95355
To summarize for the record, the plans are:
- In the short/medium term, replace the `Curve` object data type with
`Curves`
- In the longer term (no immediate plans), use a proper data block for
3D text and surfaces.
Differential Revision: https://developer.blender.org/D14114
|
|
This adds initial support for edit mode for the experimental new curves
object. For now we can only toggle in and out of the mode, no real
interraction is possible.
This patch also adds empty menus in edit mode. Those were added mainly
to quiet warnings as the menus are programmatically added to the edit
mode based on the object type and context.
Ref T95769
Reviewed By: JacquesLucke, HooglyBoogly
Maniphest Tasks: T95769
Differential Revision: https://developer.blender.org/D14136
|
|
This adds the boilerplate code that is necessary to use the tool/brush/paint
systems in the new sculpt curves mode.
Two temporary dummy tools are part of this patch. They do nothing and
only serve to test the boilerplate. When the first actual tool is added,
those dummy tools will be removed.
Differential Revision: https://developer.blender.org/D14117
|
|
usages.
|
|
|
|
Previously, the number of action map subactions was limited to two per
action (identified by user_path0, user_path1), however for devices with
more than two user paths (e.g. Vive Tracker) it will be useful to
support a variable amount instead.
For example, a single pose action could then be used to query the
positions of all connected trackers, with each tracker having its own
subaction tracking space.
NOTE: This introduces breaking changes for the XR Python API as follows:
- XrActionMapItem: The new `user_paths` collection property
replaces the `user_path0`/`user_path1` properties.
- XrActionMapBinding: The new `component_paths` collection property
replaces the `component_path0`/`component_path1` properties.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D13949
|
|
The general idea here is to wrap the `CurvesGeometry` DNA struct
with a C++ class that can do most of the heavy lifting for the curve
geometry. Using a C++ class allows easier ways to group methods, easier
const correctness, and code that's more readable and faster to write.
This way, it works much more like a version of `CurveEval` that uses
more efficient attribute storage.
This commit adds the structure of some yet-to-be-implemented code,
the largest thing being mutexes and vectors meant to hold lazily
calculated evaluated positions, tangents, and normals. That part might
change slightly, but it's helpful to be able to see the direction this
commit is aiming in. In particular, the inherently single-threaded
accumulated lengths and Bezier evaluated point offsets might be cached.
Ref T95355
Differential Revision: https://developer.blender.org/D14054
|
|
Having this setting stored in the image space caused low level selection
logic to have to pass around the image space (which could be NULL
in some cases). Use the tool-settings instead since there doesn't seem
to be much/any advantage in having this setting per-space.
|
|
|
|
This adds a new sculpt mode to the experimental new curves object.
Currently, this mode can only be entered and exited, nothing else.
The main initial purpose of this node will be to use it for hair grooming.
The patch also adds the `editors/curves/` directory for the new curves
object, which will be necessary for many other things as well.
I added a completely new mode (`OB_MODE_SCULPT_CURVES`), because
`OB_MODE_SCULPT` seems to be rather specific to meshes, and reusing
it doesn't seem worth the trouble. The tools/brushes used in mesh vs.
curves sculpt mode are quite distinct as well.
I had to add DNA_userdef_enums.h to make the patch compile with C++
(forward declaration of enums isn't allowed). This follows the same
pattern that we use for other enums in dna.
Differential Revision: https://developer.blender.org/D14107
|
|
|
|
IMA_GPU_REFRESH is replaced by
BKE_image_partial_update_mark_full_update and should not be used
anymore.
|
|
This patch increases the performance when remapping data.
{D13615} introduced a mechanism to remap multiple items in a single go.
This patch uses the same mechanism when remapping data inside ID datablocks.
Benchmark results when loading the village scene of sprite fright on AMD Ryzen 7 3800X 8-Core Processor
Before this patch 115 seconds
When patch applied less than 43 seconds
There is still some room for improvement by porting relink code.
Reviewed By: mont29
Maniphest Tasks: T95279
Differential Revision: https://developer.blender.org/D14043
|
|
|
|
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
|
|
|
|
|
|
This is part of the project of converting `MVert` into `float3`.
(more details in T93602), The pbvh update flag is removed and
replaced with a bitmap stored in the PBVH structure. This
patch is similar to D13878. This is mainly setup for an eventual
performance improvement by removing the extra data from
mesh vertices, but if it's consistent with testing in the other patch
doing the same thing for another "temp tag", then it may actually
increase the speed of sculpt code slightly, since less memory needs
to be loaded when checking/changing the flags.
Differential Revision: https://developer.blender.org/D14000
|
|
This implements the update cache described in T95401.
The cache is currently only used for drawing strokes and
sculpting (using the push brush).
**Note: Making use of the cache throughout grease pencil will
have to be done incrementally in other patches. **
The update cache stores what elements have changed in the
original data-block since the last time the eval object
was updated. Additionally, the update cache can store multiple
updates to the data and minimizes the number of elements
that need to be copied.
Elements can be tagged using `BKE_gpencil_tag_full_update` and
`BKE_gpencil_tag_light_update`. A full update means that the element
itself will be copied but also all of the content inside. E.g. when a
layer is tagged for a full update, the layer, all the frames inside the
layer and all the strokes inside the frames will be copied.
A light update means that only the properties of the element are copied
without any of the content. E.g. if a layer is tagged with a light
update, it will copy the layer name, opacity, transform, etc.
When the update cache is in use (e.g. elements have been tagged) then
the depsgraph will not trigger a copy-on-write, but an update-on-write.
This means that the update cache will be used to determine what elements
have changed and then only those elements will be copied over to the
eval object.
If the update cache is empty or the data block was tagged with a full
update, we always fall back to a copy-on-write.
Currently, the update cache is only used by the active depsgraph. This
is because we need to free the update cache after an update-on-write so
it's reset and we need to make sure it is not freed or read by other
depsgraphs.
Co-authored-by: @yann-lty
This patch was contributed by The SPA Studios.
Reviewed By: sergey, antoniov, #dependency_graph, pepeland, mendio
Maniphest Tasks: T95401
Differential Revision: https://developer.blender.org/D13984
|
|
Also some descriptive text into doc-strings.
|
|
When image position is animated, float makes movement look smoother.
|
|
Continuation of 19100aa57d847699d17527b76c2fab1f4ab88885.
|
|
Avoid using the uint64_t as an intermediate cast since it complicates
behavior for signed types (which first need to be cast to an int64_t).
Assign both old_value_i & old_value_f from the original value to avoid
the need for different handling of signed/unsigned types.
Reviewed By: JacquesLucke
Ref D14039
|
|
This change will make handling of liboverrides hierarchies (especially
resyncing) much easier and efficient. It should also make it more
resilient to 'degenerate' cases, and allow proper support of things like
parenting an override to another override of the same linked data (e.g.
a override character parented to another override of the same
character).
NOTE: this commit only implements minimal changes to add that data and
generate it for existing files on load. Actual refactor of resync code
to take advantage of this new info will happen separately.
|
|
|
|
Regression in 51befa4108128a7bacf7a201046cf7ede999833a
caused negative values to overflow into a uint64_t.
Resolve by casting to a signed int from originally signed types.
This caused D14033 not to work properly.
|
|
Assign the actual value before casting to large uint64_t/double types.
This improves readability, especially in cases where both pointer
and integer casts were used in one expression, to make matters worse
clang-format treated these casts as a multiplication.
This also made debugging/printing the values more of a hassle.
No functional changes (GCC produced identical output).
|
|
Based on discussions from T95355 and T94193, the plan is to use
the name "Curves" to describe the data-block container for multiple
curves. Eventually this will replace the existing "Curve" data-block.
However, it will be a while before the curve data-block can be replaced
so in order to distinguish the two curve types in the UI, "Hair Curves"
will be used, but eventually changed back to "Curves".
This patch renames "hair-related" files, functions, types, and variable
names to this convention. A deep rename is preferred to keep code
consistent and to avoid any "hair" terminology from leaking, since the
new data-block is meant for all curve types, not just hair use cases.
The downside of this naming is that the difference between "Curve"
and "Curves" has become important. That was considered during
design discussons and deemed acceptable, especially given the
non-permanent nature of the somewhat common conflict.
Some points of interest:
- All DNA compatibility is lost, just like rBf59767ff9729.
- I renamed `ID_HA` to `ID_CV` so there is no complete mismatch.
- `hair_curves` is used where necessary to distinguish from the
existing "curves" plural.
- I didn't rename any of the cycles/rendering code function names,
since that is also used by the old hair particle system.
Differential Revision: https://developer.blender.org/D14007
|
|
Previously, nearest interpolation filter was used for preview, because
it offered good performance and bilinear was used for rendering. This
is not always desirable behavior, so filter method can now be chosen by
user. Chosen method will be used for preview and for rendering.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D12807
|
|
The value of this flag was set, but not used anywhere.
Differential Revision: https://developer.blender.org/D13519
|
|
This commit adds infrastructure for 8 bit signed integer attributes.
This can be useful given the discussion in T94193, where we want to
store spline type, Bezier handle type, and other small enums as
attributes.
This is only exposed in the interface in the attribute lists, so it
shouldn't be an option in geometry nodes, at least for now.
I expect that this type won't be used directly very often, it
should mostly be cast to an enum type. However, with support
for 8 bit integers, it also makes sense to add things like mixing
implementations for consistency.
Differential Revision: https://developer.blender.org/D13721
|
|
DNAstr was assumed to be 4-byte aligned which is not necessarily
the case for byte-arrays.
Use a compiler attribute to ensure this is the case.
Thanks to @mtasaka for investigating and providing a patch.
|
|
Part of T91671.
Not much else to say, this is mainly a massive deletion of code.
Note that a few cleanups possible after this proxy removal were kept out
of this commit to try to reduce a bit its size.
Reviewed By: sergey, brecht
Maniphest Tasks: T91671
Differential Revision: https://developer.blender.org/D13995
|
|
Since f59767ff97295404d, these hair layer types are unused. Since DNA
compatibility was broken with any files that would contain them, the
indices can be reused to avoid growing custom data's typemap.
|
|
This patch refactors the "Hair" data-block, which will soon be renamed
to "Curves". The larger change is switching from an array of `HairCurve`
to find indices in the points array to simply storing an array of offsets.
Using a single integer instead of two halves the amount of memory for that
particular array.
Besides that, there are some other changes in this patch:
- Split the data-structure to a separate `CurveGeometry`
DNA struct so it is usable for grease pencil too.
- Update naming to be more aligned with newer code and the style guide.
- Add direct access to some arrays in RNA
-- Radius is now retrieved as a regular attribute in Cycles.
-- `HairPoint` has been renamed to `CurvePoint`
-- `HairCurve` has been renamed to `CurveSlice`
- Add comments to the struct in DNA.
The next steps are renaming `Hair` -> `Curves`, and adding support
for other curve types: Bezier, Poly, and NURBS.
Ref T95355
Differential Revision: https://developer.blender.org/D13987
|
|
|
|
Use the ID.recalc flag to detect when updates after frame-change is
needed. Since comparing the last calculated frame doesn't take undo into
account (see code-comment for details).
`ID_RECALC_AUDIO_SEEK` has been renamed to `ID_RECALC_FRAME_CHANGE`
since this is not only related to audio however internally this flag is
still categorized in `NodeType::AUDIO`.
Reviewed By: sergey
Ref D13942
|
|
|
|
The issue was happening with a specific file where the ID management
code was not fully copying all modifiers because of the extra check
in the `BKE_object_support_modifier_type_check()`.
While it is arguable that copy-on-write should be a 1:1 copy there is
no real need to maintain the per-modifier pointer to its original.
Use its SessionUUID to perform lookup in the original datablock.
Downside of this approach is that it is a linear lookup instead of
direct pointer access, but the upside is that there is less pointers
to manage and that the file with unsupported modifiers does behave
correct without any asserts.
Differential Revision: https://developer.blender.org/D13993
|
|
Now all proxies will always be converted to library overrides. If
conversion fails, they are simply 'disabled'.
This should be the last 'user-visible' step of proxies removal.
Remaining upcoming commits will remove internal ID management, depsgraph
and evaluation code related to proxies.
Also bump the blendfile subversion.
Part of T91671.
|
|
|
|
As part of the project of converting `MVert` into `float3`
(more details in T93602), this is an easy step, since it
is only locally used runtime data. In the six places it was
used, the flag was replaced by a local bitmap.
By itself this change has no benefits other than making some
code slightly simpler. It only really matters when the other
flags are removed and it can be removed from `MVert`
along with the bevel weight.
Differential Revision: https://developer.blender.org/D13878
|
|
In Outliner, 'Make Override Hierarchy' on an indirectly linked data would
fail in case some items higher up in the hierarchy also needed to be
overridden was also indirectly linked.
|
|
In Outliner, 'Make Override Hierarchy' on an indirectly linked data would
fail in case some items higher up in the hierarchy also needed to be
overridden was also indirectly linked.
|
|
This patch reimplements the image partial updates. Biggest design motivation for the redesign
is that currently GPUTextures must be owned by the image. This reduces flexibility and adds
complexity to a single component especially when we want to have different structures.
The new design is not limited to GPUTextures and can also be used by reducing overhead in image
operations like scaling. Or partial image updating in Cycles.
The usecase in hand is that we want to support virtual images in the image editor so we can
work with images that don't fit in a single GPUTexture.
Using `BKE_image_partial_update_mark_region` or `BKE_image_partial_update_mark_full_update`
a part of an image can be marked as dirty. These regions are stored per ImageTile (UDIM).
When a part of the code wants to receive partial changes it needs to construct a `PartialUpdateUser`
by calling `BKE_image_partial_update_create`. As long as this instance is kept alive the changes can
be received.
When a user wants to update its own data it will call `BKE_image_partial_update_collect_changes`
This will collect the changes since the last time the user called this function. When the partial changes
are available the partial change can be read by calling `BKE_image_partial_update_get_next_change`
It can happen that the introduced mechanism doesn't have the data anymore to construct the
changes since the last time a PartialUpdateUser requested it. In this case it will get a request
to perform a full update.
Maniphest Tasks: T92613
Differential Revision: https://developer.blender.org/D13238
|
|
Adds two new attribute outputs:
"Line" outputs the line number of the character.
"Pivot Point" outputs the selected pivot point position per char.
Some refactoring of the text layout code.
Differential Revision: https://developer.blender.org/D13694
|
|
|
|
|
|
List the operations in the search instead of the "Boolean" socket names.
|
|
Currently the Boolean Math node only has 3 basic logic gates:
AND, OR, and NOT. This commit adds 6 additional logic gates
for convenience and ease of use.
- **Not And (NAND)** returns true when at least one input is false.
- **Nor (NOR)** returns true when both inputs are false.
- **Equal (XNOR)** returns true when both inputs are equal.
- **Not Equal (XOR)** returns true when both inputs are different.
- **Imply (IMPLY)** returns true unless the first input is true and
the second is false.
- **Subtract (NIMPLY)** returns true when the first input is true and
the second is false.
Differential Revision: https://developer.blender.org/D13774
|
