Age | Commit message (Collapse) | Author |
|
Found during researching {T86956}.
|
|
This is an initial change to speed up the calculation of the Occlude eraser. In the future, we can add more optimizations, but at least this increase speed.
Intead to check always the 3 points, the check is skipped if it's not required.
Base in a solution by Philipp Oeser.
This is related to T88412
|
|
|
|
Previously, the "follow path constraint" and "follow parented curve"
were clamped. This restriction was lifted in rBcf2baa585cc8
Add back an option to get the old behavior in the "Path animation" settings.
Reviewed By: Sybren
Differential Revision: http://developer.blender.org/D11263
|
|
Since version 2.80, the annotations of the Scene strip were not displayed in VSE. Also, the UI panel was`Grease Pencil` and must be `Annotation`
The problem was the offscreen render hasn't evil_CTX and the section of the annotation was never called.
Differential Revision: https://developer.blender.org/D11329
|
|
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D8264
|
|
|
|
Resolve ownership ambiguity with shared physics pointers.
Previously, LIB_ID_CREATE_NO_MAIN allowed pointer sharing with
the source ID so physics caches can be shared between original and
evaluated data: (Object.soft.shared & Object.rigidbody_object.shared).
This only worked properly for LIB_TAG_COPIED_ON_WRITE ID's,
as LIB_TAG_NO_MAIN can be used in situations where the original ID's
lifetime limited by it's original data.
This commit adds `LIB_ID_COPY_SET_COPIED_ON_WRITE` so ID's only share
memory with original data for ID's evaluated in the depsgraph.
For all other uses, a full copy of physics data is made.
Ref D11228#287094
|
|
Adds internal API for creating and managing OpenXR actions at the
GHOST and WM layers. Does not bring about any changes for users since
XR action functionality is not yet exposed in the Python API (will be
added in a subsequent patch).
OpenXR actions are a means to communicate with XR input devices and
can be used to retrieve button/pose states or apply haptic feedback.
Actions are bound to device inputs via a semantic path binding
(https://www.khronos.org/registry/OpenXR/specs/1.0/html/xrspec.html#semantic-path-interaction-profiles),
which serves as an XR version of keymaps.
Main features:
- Abstraction of OpenXR action management functions to GHOST-XR,
WM-XR APIs.
- New "xr_session_start_pre" callback for creating actions at
appropriate point in the XR session.
- Creation of name-identifiable action sets/actions.
- Binding of actions to controller inputs.
- Acquisition of controller button states.
- Acquisition of controller poses.
- Application of controller haptic feedback.
- Carefully designed error handling and useful error reporting
(e.g. action set/action name included in error message).
Reviewed By: Julian Eisel
Differential Revision: http://developer.blender.org/D10942
|
|
|
|
|
|
The sockets are not exposed in any nodes yet.
They work similar to the Object/Collection sockets, which also
just reference a data block.
This is part of D11222.
|
|
|
|
Port vector rotate node to geo attributes.
Request by @simonthommes
Reviewed By: simonthommes, HooglyBoogly
|
|
Add translation/rotation/scale parameters for custom bones shapes. The
new scale is a 3D vector `custom_shape_scale_xyz`, and replaces the
`custom_shape_scale` float.
Reviewed By: #animation_rigging, sybren, zeddb
Differential Revision: https://developer.blender.org/D10974
|
|
|
|
This node generates a naturally parametarized (even length edge) poly
spline version of every spline in the input. There are two modes,
"Count", and "Length". These are similar to the same options for the
line primitive node in end points mode.
I implemented this instead of a "Sample Points" node, because for this
operation it's trivial to keep the result as a curve, which is nice
since it increases flexibility, and because it can make instancing
simpler, i.e. using the transforms of each evaluated point rather than
requiring the construction of a "rotation" attribute.
Differential Revision: https://developer.blender.org/D11173
|
|
This node has the same functionality as the color and vector curve
mapping nodes in the shader editor. Here is works on every value for
the selected attribute, and it can also output a float value. Other
than that, the implementation is quite straightforward-- almost
completely boilerplate code.
Differential Revision: https://developer.blender.org/D10921
|
|
Internally, when using Fill brush a dilate of the filled area was done, but this was hardcoded to 1 pixel.
In some situations, this was not enough, so now the value is accesible in the UI and can be set with different values.
Also, as this value is more used than `Leak Size`, the new Dilate is on Topbar, and Leak Size has been moved to Advanced panel.
|
|
Currently there is an "Auto" option for the domain, this commit adds a
similar option for "Auto" data type, that uses the data type from the
target attribute or the source attribute (in that order).
Ref T87347
Differential Revision: https://developer.blender.org/D10932
|
|
This patch adds the Randomize options that exist in the Array modifier to the offset modifier.
Currently the patch uses
```
BLI_findindex(&gpf->strokes, gps);
```
to get the index of the current stroke for making each stroke a different seed value. This is how the noise modifier also gets the stroke seed value and it is noted there as well that this method is slow, and should be fixed in the future with another method of getting the stroke index.
Other methods were explored such as using the total number of points of the stroke, but that makes the randomize options incompatible with other modifiers before it such as Multiple Strokes, Array, Build, and Simplify.
{F9591325}
Differential Revision: https://developer.blender.org/D10171
|
|
Thickness modifiers
This patch allows you to dynamically control stroke's opacity and thickness using an object for distance reference in the modifier. Fading range is adjustable, and it is compatible with current curve/vertex group selection.
Reviewed By: #grease_pencil, antoniov, mendio
Maniphest Tasks: T82177, T80194
Differential Revision: https://developer.blender.org/D9091
|
|
This is a first version of an Attribute Transfer node. It only supports two
modes for mapping attributes from one geometry to another for now.
More options are planned for the future.
Ref T87421.
Differential Revision: https://developer.blender.org/D11037
|
|
|
|
This fixes T87666 and T83252.
The boolean modifier and geometry nodes can depend on the geometry
of an entire collection. Before, the modifiers had to manually create relations
to all the objects in the collection. This worked for the most part, but was
cumbersome and did not solve all issues. For example, the modifiers were not
properly updated when objects were added/removed from the referenced collection.
This commit introduces the concept of "collection geometry" in the depsgraph.
The geometry of a collection depends on the transforms and geometry of all
the objects in it. The boolean modifier and geometry nodes can now just depend
on the collection geometry instead of creating all the dependencies themselves.
Differential Revision: https://developer.blender.org/D11053
|
|
|
|
Differential Revision: https://developer.blender.org/D11056
|
|
The old value of 5 was not enough for some situations.
|
|
|
|
The `bisect_distance` in the mirror modifier was hard-coded to `0.001`.
This would result in some unexpected behavior like vertices close
to the mirror plane being deleted or merged.
The fix now adds a parameter to the mirror modifier to expose the
bisect distance to the user. The default is set to the previous
hard-coded value to not "change" previous files.
Ref D10201
|
|
|
|
This is a first iteration of a switch node. It can only switch between
two inputs values based on a boolean. A more sophisticated switch
node that has an integer selector will probably come later.
Currently, the geometry nodes evaluator does not support lazy evaluation
of individual inputs. Therefore, all inputs will be computed currently.
An improvement to the evaluator will be worked on separately.
Ref: T85374
Differential Revision: https://developer.blender.org/D10460
|
|
Click-drag events that weren't handled would continually be tested
for each mouse-motion event.
As well as being redundant, this added the overhead of querying
gizmos twice per motion event.
Now click-drag is only tested once when the drag threshold is reached.
This mitigates T87511, although the single drag test still causes
the snap gizmo to flicker.
|
|
Keymap UI and import/export could depend on the current
context for dynamic enum's.
Use STRUCT_NO_CONTEXT_WITHOUT_OWNER_ID for OperatorProperties.
|
|
This introduces a context path to the spreadsheet editor, which contains
information about what data is shown in the spreadsheet. The context
path (breadcrumbs) can reference a specific node in a node group
hierarchy. During object evaluation, the geometry nodes modifier checks
what data is currently requested by visible spreadsheets and stores
the corresponding geometry sets separately for later access.
The context path can be updated by the user explicitely, by clicking
on the new icon in the header of nodes. Under some circumstances,
the context path is updated automatically based on Blender's context.
This patch also consolidates the "Node" and "Final" object evaluation
mode to just "Evaluated". Based on the current context path, either
the final geometry set of an object will be displayed, or the data at
a specific node.
The new preview icon in geometry nodes now behaves more like
a toggle. It can be clicked again to clear the context path in an
open spreadsheet editor.
Previously, only an object could be pinned in the spreadsheet editor.
Now it is possible to pin the entire context path. That allows two
different spreadsheets to display geometry data from two different
nodes.
The breadcrumbs in the spreadsheet header can be collapsed by
clicking on the arrow icons. It's not ideal but works well for now.
This might be changed again, if we get a data set region on the left.
Differential Revision: https://developer.blender.org/D10931
|
|
GOP size and quality are adjusted for h264 codec.
These new values are based on result of benchmark on 9 random files:
https://docs.google.com/spreadsheets/d/1nOyUGjoVWUyhQ2y2lAd8VtFfyaY1wQNGj1krCCNbk7Y/edit?usp=sharing
Reducing quality to 50 reduces proxy filesize by about 2x on average
and has no significant impact on decoding performance.
Increasing GOP size from 2 to 10 also reduces proxy filesize 2x-3x
while scrubbing is only about 8% slower. It is still around 100FPS
with 1920x1080 media.
This is unfortunately about 50% slower than MJPEG, but this can be
improved with `fastdecode` tune applied to libx264 encoder
Quite surprisingly h264 codec presets had little influence on proxy
building performance as well as proxy filesize. So far it looks that
FFmpeg does initialize encoder in different way then Blender.
This applies mot only for presets but for tune and profile libx264
setting.
Once this issue is resolved, performance of proxies may be optimized
further.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D10897
|
|
With this patch, users can define custom tooltips for the exposed
properties of their Geometry Nodes Groups.
Currently this custom tooltips are only used in the modifier panel,
but its a long term goal to use it in the node editor.
Reviewer: Hans Goudey
Differential Revision: https://developer.blender.org/D10884
|
|
This implements the changes discussed in T87134 for including switch
object funcionality in 2.93. This includes:
- Remove the switch object operator experimental option
- Remove the option for switching objects in Edit Mode.
- Rename switch_object to transfer_mode.
- Enable the operator only in sculpt mode.
- Expose the operator in the Sculpt menu with an eyedropper modal
option.
On later releases, we could revisit enabling the operator in other mode
and object types as well as its place in the UI.
Reviewed By: JulienKaspar, JacquesLucke
Differential Revision: https://developer.blender.org/D10953
|
|
|
|
Differential Revision: https://developer.blender.org/D8908
|
|
This also fixes the issue that the width of the "Name" column
when viewing instances does not resize correctly.
Differential Revision: https://developer.blender.org/D10926
|
|
|
|
A `DataSource` provides columns for the spreadsheet to display.
Every column has a SpreadsheetColumnID as identifier. Columns
are not generated eagerly anymore, instead the main spreadsheet
code can request a column from a data source with an column
identifier. The column identifiers can be stored in DNA and allow us
to store persistent data per column.
On the user level the only thing that changes is that columns are
not shown in alphabetical order anymore. Instead, new columns
are always added on the left. The behavior can be changed,
however I'd prefer not to automate this too much currently. I think
we should just add operators to hide/reorder/resize columns soonish.
Differential Revision: https://developer.blender.org/D10901
|
|
Previously, the spreadsheet editor could only show data of the original
and of the final evaluated object. Now it is possible to show the data
at some intermediate stages too.
For that the mode has to be set to "Node" in the spreadsheet editor.
Furthermore, the preview of a specific node has to be activated by
clicking the new icon in the header of geometry nodes.
The exact ui of this feature might be refined in upcoming commits.
It is already very useful for debugging node groups in it's current
state though.
Differential Revision: https://developer.blender.org/D10875
|
|
The issue was that where_on_path uses a resampled curve to get the data
from the curve. This leads to disconnects between the curve the user
sees and the evaluated location data.
To fix this we simply use the actual curve data the user can see.
The older code needed a cleanup either way as there were hacks in other
parts of the code trying to work around some brokenness. This is now
fixed and we no longer need to clamp the evaluation range to 0-1 or make
helper functions to make it do what we actually want.
Reviewed By: Campbell, Sybren
Differential Revision: http://developer.blender.org/D10898
|
|
This is a minimal, information-only view currently, listing by default
all the override data-blocks, with their user-edited override
properties.
System-generated overrides (like the overrides of pointers to other
override data-blocks) can be shown through a filter option.
Finally, potential info or warning messages from (auto-)resync propcess
are also shown, as an icon + tooltip next to the affected items.
Part of D10855.
|
|
This flag is set for liboverride IDs that are detected as no longer
needed by resync process, while having been user-edited, so
auto-handling code cannot silently delete them.
Exposing those to users will be part of the new incoming Override
Outliner view.
Part of D10855.
|
|
caches
This resulted in bad motion blur from alembic animation when imported
after rB83980506957c (because it was now OFF by default).
When imported in a version prior to rB83980506957c and saved, this was
still working fine.
Vertex interpolation option introduced in rBbab2260b59c7 was defaulting
to ON (correct) in that commit, but was lost in rB83980506957c.
Now switch this to ON by default again.
Note: if you have a file that was (incorrectly) imported with a version
after rB83980506957c you'll have to enable Vertex Interpolation option
on every MeshSequenceCache modifier by hand.
Maniphest Tasks: T86654
Differential Revision: https://developer.blender.org/D10876
|
|
Before this change, you could have the new sculpt symmetry code and the
older weight paint symmetry code active at the same time. This would
lead to users easily trashing their weigh paint data if they were not
careful when switching between modes.
Now the specific weight paint symmetry code is an exclusive toggle so
the user can't accidentally mirror strokes and vertex groups at the same
time. This also paves the way of supporting Y and Z symmetry in the
future for weight groups mirroring if we decide to add it in the future.
Reviewed By: Sybren
Differential Revision: http://developer.blender.org/D10426
|
|
This fixes T86440
As the CU_2D flag is set for nurbs, a Curve can have 2D nurbs mixed with 3D.
But the UI does not allow this mixing. It updates all nurbs to 2D or 3D when set.
So remove this specific flag for nurbs.
This may break old files, since 2D curves with mixed 3D are now set as 3D.
Differential Revision: https://developer.blender.org/D10738
|