| Age | Commit message (Collapse) | Author |
|---|
|
Was introduced in rB93a8fd1249f
|
|
Since points aren't relevant in function nodes, replace all mentions
of it with "local" to illustrate rotations done in local-space instead.
Differential Revision: https://developer.blender.org/D12881
|
|
This commit adds an updated version of the old attribute transfer node.
It works like a function node, so it works in the context of a
geometry, with a simple data output.
The "Nearest" mode finds the nearest element of the specified domain on
the target geometry and copies the value directly from the target input.
The "Nearest Face Interpolated" finds the nearest point on anywhere on
the surface of the target mesh and linearly interpolates the value on
the target from the face's corners.
The node also has a new "Index" mode, which can pick data from specific
indices on the target geometry. The implicit default is to do a simple
copy from the target geometry, but any indices could be used. It is also
possible to use a single value for the index to to retrieve a single
value from an attribute at a certain index.
Differential Revision: https://developer.blender.org/D12785
|
|
There were several places attempting to check to see if scene lights
and world were enabled for display. This tries to find a common place
for both of these to reduce duplication.
Honestly, I couldn't find a really good spot for these and settled on
DRW_engine. It's not the best spot since they're not strictly drawing
related, but let's start here.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D12658
|
|
We have mostly removed information about original authors,
as this information isn't so useful.
|
|
By argument naming and convention this is the intended argument order.
|
|
Addresses T77127 (Controller Drawing).
Adds VR controller visualization and custom drawing via draw
handlers. Add-ons can draw to the XR surface (headset display) and
mirror window by adding a View3D draw handler of region type 'XR' and
draw type 'POST_VIEW'. Controller drawing and custom overlays can be
toggled individually as XR session options, which will be added in a
future update to the VR Scene Inspection add-on.
For the actual drawing, the OpenXR XR_MSFT_controller_model extension
is used to load a glTF model provided by the XR runtime. The model's
vertex data is then used to create a GPUBatch in the XR session
state. Finally, this batch is drawn via the XR surface draw handler
mentioned above.
For runtimes that do not support the controller model extension, a
a simple fallback shape (sphere) is drawn instead.
Reviewed By: Severin, fclem
Differential Revision: https://developer.blender.org/D10948
|
|
Adds a color input node with picker.
Differential Revision: https://developer.blender.org/D12793
|
|
There is not enough time before the release to improve Random Walk to handle
all cases this was used for, so restore it for now.
Since there is no more path splitting in cycles-x, this can increase noise in
non-flat areas for the sample number of samples, though fewer rays will be traced
also. This is fundamentally a trade-off we made in the new design and why Random
Walk is a better fit. However the importance resampling we do now does help to
reduce noise.
Differential Revision: https://developer.blender.org/D12800
|
|
This commit implements T91780, adding nodes to get and set builtin
attributes. Individual set nodes are used so that the values can be
exposed for direct editing, which is useful for attributes like shade
smooth and spline resolution. Individual input nodes are used to allow
reusing nodes for multiple components, and to allow grouping multiple
outputs conceptually in the same node in the future.
Input Nodes
- Radius
- Curve Tilt
- Curve Handle Positions
- Is Shade Smooth
- Spline Resolution
- Is Spline Cyclic
'Set' Nodes
- Curve Radius
- Point Radius
- Curve Tilt
- Curve Handle Positions
- Is Shade Smooth
- Spline Resolution
- Is Spline Cyclic
Using hardcoded categories is necessary to add separators to the node
menu.
Differential Revision: https://developer.blender.org/D12687
|
|
Delete Geometry:
This adds a copy of the old node in the legacy folder and updates the
node to work with fields. The invert option is removed, because it is
something that should be very easy with fields, and to be consistent
with other nodes which have a selection. There is also a dropdown to
select the domain, because the domain can't be determined from the
field input. When the domain does not belong on any of the components
an info message is displayed.
Separate Geometry:
A more general version of the old Point Separate node. The "inverted"
output is the same as using the delete geometry node.
Differential Revision: https://developer.blender.org/D12574
|
|
This commit introduces the Align Euler to Vector function node which
rotates to a body into a given direction. The node replaces the legacy
"Align Rotation to Vector" node, which only worked on an attribute
named `rotation` internally. The "Euler" in the name is meant to make
it clearer that the rotation isn't interchangeable with a regular
vector.
Addresses T91374.
Differential Revision: https://developer.blender.org/D12726
|
|
Rename `SEQ_EDIT_OVERLAY_SHOW` to `SEQ_EDIT_USE_FRAME_OVERLAY` to avoid
confusion between `SEQ_SHOW_OVERLAY` of `SpaceSeq.flag`
|
|
Use shortcut matching the 3D view & popover in the header
|
|
While drawing cleared this value (as part of temporary fix from 2009),
this was still being checked until recently.
Remove this value in versioning code.
Also clear unused text space flag.
|
|
This makes the diff for adding a new version of the attribute transfer
node slightly smaller.
|
|
- Use 2D cursor in the preview space using shortcuts
matching the UV editor and 3D view.
- Add Cursor tool, cursor transform.
- Support for cursor and bound-box pivot.
- Add pivot pie menu.
|
|
|
|
|
|
Match eSpace_Type.
|
|
This commit introduces the Rotate Euler function node which modifies
an input euler rotation. The node replaces the "Point Rotate" node.
Addresses T91375.
Differential Revision: https://developer.blender.org/D12531
|
|
Enable sorting motion tracking tracks by start / end times.
Help identifying what cases reconstructed camera jumps, based
on information about whether any track starts/ends at the frame.
Based on revision eb0eb54d9644c5139ef139fee1e14da35c4fab7e.
{F10563305}
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D12621
|
|
Add Offset/Slope/Power controls to the color balance modifier. This is
already available in compositor.
Reviewed By: sergey, ISS
Differential Revision: https://developer.blender.org/D12575
|
|
|
|
Also use int8_t for color tag.
|
|
The Asset Browser now displays a tree with asset catalogs in the left
sidebar.
This replaces the asset categories. It uses the new UI tree-view API
(https://wiki.blender.org/wiki/Source/Interface/Views#Tree-View).
Buttons are displayed for adding and removing of catalogs. Parent items
can be collapsed, but the collapsed/uncollapsed state is not stored in
files yet.
Note that edits to catalogs (e.g. new or removed catalogs) are only
written to the asset library's catalog definition files when saving a
.blend.
In the "Current File" asset library, we try to show asset catalogs from
a parent asset library, or if that fails, from the directory the file is
stored in. See adaf4f56e1ed.
There are plenty of TODOs and smaller glitches to be fixed still. Plus a
UI polishing pass should be done.
Important missing UI features:
* Dragging assets into catalogs (WIP, close to being ready).
* Renaming catalogs
* Proper handling of catalogs in the "Current File" asset library
(currently not working well).
The "Current File" asset library is especially limited still. Since this
is the only place where you can assign assets to a catalog, this makes
the catalogs very cumbersome in general. To assign an asset to a
catalog, one has to manually copy the Catalog ID (a random hash like
number) to the asset metadata through a temporary UI in the Asset
Browser Sidebar. These limitations should be addressed over the next few
days, they are high priority.
Differential Revision: https://developer.blender.org/D12670
|
|
With 794c2828af60 & f48a4aa0f915 it's possible to reuse possibly
expensive, nested data of a data-block when appending. E.g. the
texture of a material, or the mesh of an object. Without this it's easy
to bloat memory and the file size. Duplicated textures also cause
unnecessary shader recompilations.
The feature was intended to be the new default behavior for the Asset
Browser, but it wasn't actually added to the UI yet. This patch adds a
new import type option to the Asset Browser. So from the menu in the
header, you can now choose between:
* Link
* Append
* Append (Reuse Data)
The latter is the new default.
Maniphest Task: https://developer.blender.org/T91741
Differential Revision: https://developer.blender.org/D12647
Reviewed by: Sybren Stüvel, Bastien Montagne
|
|
This patch adds color tags to VSE strips, an overlay option to toggle the colors
on and off, a section in the theme settings to define the 9 possible colors and
two ways of changing the color tag through the UI. You can change the color
through the right-click context menu, or in the strip side panel next to the
strip name.
Color tags are defined in user preferences and they can be disabled in overlay
settings.
Reviewed By: campbellbarton, ISS
Differential Revision: https://developer.blender.org/D12405
|
|
Implements T89789, T89792, custom grid (described as dynamic grid in
T78389) and UV grid snapping (T78391)
Replaces the default UV editor grid with 2 new types of grid :
* Custom grid: Allows the user to create an NxN grid, where the value
of N is specified by the user.
* Subdividing grid: Subdivides the UV editor grid when the user
zooms in the viewport and vice versa when zooming out.
UV snapping improvements :
* Increment snapping: Increment values for snapping are calculated based
on which grid type is being used in the UV editor
(subdividing or custom). In general the increment value is equal to
the distance between 2 visible grid lines.
* Absolute grid snap: New toggle added to increment snapping option in
the UV editor, allows UV grid snapping during translation.
Reviewed By: campbellbarton
Ref D12684
|
|
|
|
Add a fields-aware implementation of the attribute proximity node.
The Source position is an implicit position field, but can be
connected with a position input node with alterations before use.
The target input and mode function the same as the original node.
Patch by Johnny Matthews with edits from Hans Goudey (@HooglyBoogly).
Differential Revision: https://developer.blender.org/D12635
|
|
This enables fields as the official workflow for geometry nodes.
While many features are converted to use fields rather than the old
attribute workflow, many are not yet converted. In that case, the
unconverted nodes are still accessible with an experimental option.
In the coming weeks the rest of the nodes will be converted.
Differential Revision: https://developer.blender.org/D12672
|
|
This commit adds nodes to do direct conversion between meshes and point
clouds in geometry nodes. The conversion from mesh to points is helpful
to instance once per face, or once per edge, which was previously only
possibly with ugly work-arounds. Fields can be evaluated on the mesh
to pass them to the points with the attribute capture node.
The other conversion, point cloud to mesh vertices, is a bit less
obvious, though it is still a common request from users. It's helpful
for flexibility when passing data around, better visualization in the
viewport (and in the future, cycles), and the simplicity of points.
This is a step towards T91754, where point clouds are currently
combined with meshes when outputing to the next modifier after geometry
nodes. Since we're removing the implicit behavior for realizing
instances, it feels natural to use an explicit node to convert points
to vertices too.
Differential Revision: https://developer.blender.org/D12657
|
|
Change the toggle to switch between an attribute and a single value to
only display for inputs that are fields, as determined statically by
the field inferencing added in rB61f3d4eb7c7db7. This means the field
inferencing must be calculated on file load, since it's used in the UI.
Differential Revision: https://developer.blender.org/D12623
|
|
This patch allows passing a field to the modifier as output. In the
modifier, the user can choose an attribute name. The attribute
will be filled with values computed by the field. This only works
for realized mesh/curve/point data. As mentioned in T91376, the
output domain is selected in the node group itself. We might want
to add this functionality to the modifier later as well, but not now.
Differential Revision: https://developer.blender.org/D12644
|
|
The original limit dates back from 2002 when Blender went open source.
After that many years some productions (e.g., Sprite Fright) are already
experiencing limitations for complex edits.
The future plans is to support an initial shorter (2?) number of
channels with support to "unlimited" channels.
Finally, I'm bumping the minimum file requirement since files with more
than 32 channels won't work well in old Blender versions.
In a future commit I will implement a sanitization so that we only read (and write)
128 channels. Making sure future changes of this number won't corrupt Blender.
Differential Revision: https://developer.blender.org/D12645
|
|
smooth out jaggy lines with a given threshold. For each point in a stroke, the ones with in a given distance of its previous segment will be removed,
thus "zig-zag" artefacts can be cleaned up.
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D12050
|
|
This node replaces the deprecated Attribute Randomize node, populating
a vector, float, integer or boolean field with random values. Vector,
float, and integer have min/max settings, which are also field aware.
The boolean type has a probability value for controlling what portion
of the output should be true. All four types have a field seed input
which is implicitly driven by the index, otherwise, all values would
be the same "random" value.
The Random Float node is now deprecated like other nodes, since it is
redundant with this node.
Differential Revision: https://developer.blender.org/D12603
|
|
Until now, the asset catalogs would only show up after all assets from
the library were loaded. Now the catalogs are read first, which makes
them appear pretty much immediately. This makes the UI more responsive
and feel less heavy.
I added a dedicated file-list type for asset libraries now. While not
necessarily needed, I prefer that so asset library specific stuff can be
handled in there.
|
|
This commit adds a node that generates a text paragraph as curve
instances. The inputs on the node control the overall shape of the
paragraph, and other nodes can be used to move the individual instances
afterwards. To output more than one line, the "Special Characters" node
can be used.
The node outputs instances instead of real geometry so that it doesn't
have to duplicate work for every character afterwards. This is much
more efficient, because all of the curve evaluation and nodes like fill
curve don't have to repeat the same calculation for every instance of
the same character.
In the future, the instances component will support attributes, and the
node can output attribute fields like "Word Index" and "Line Index".
Differential Revision: https://developer.blender.org/D11522
|
|
This commit also add an experimental userPreferences to prevent proxies
conversions on file load, and reporting for amount of coverted proxies
(and possible issues).
Note that potentially linked proxies from other libraries are not
hamdled here (this feature seems to be broken anyway in master
currently?).
|
|
This adds a replacement for the deprecated Point Distribute node.
Arguments for the name change can be found in T91155.
Descriptions of the sockets are available in D12536.
Thanks to Jarrett Johnson for the initial patch!
Differential Revision: https://developer.blender.org/D12536
|
|
Goal is to add the length attribute to the Hair Info node, for better control over color gradients or similar along the hair.
Reviewed By: #eevee_viewport, brecht
Differential Revision: https://developer.blender.org/D10481
|
|
|
|
This implements the update logic for the vizualization of which
sockets pass data or constants directly, and which pass functions.
The socket shapes may still have to be updated. That should be
done separately, because it might be a bit more involved, because
socket shapes are currently linked to keyframe shapes. Currently
the circle and diamond shapes are used with the following meanings:
- Input Sockets:
- Circle: Required to be a single value.
- Diamond: This input supports fields.
- Output Sockets:
- Circle: This output is a single value.
- Diamond: This output may be a field.
Connecting a field to a circle input socket is an error, since a
field cannot be converted to a single value. If the socket shape
is a diamond with a dot in the middle, it means it is currently
a single value, but could be a field.
In addition to socket shapes, the intention is to draw node links
differently based on the field status. However, the exact method for
conveying that isn't decided yet.
Differential Revision: https://developer.blender.org/D12584
|
|
Catalogs work like directories on disk (without hard-/symlinks), in that
an asset is only contained in one catalog.
See T90066 for design considerations.
#### Known Limitations
Only a single catalog definition file (CDF), is supported, at
`${ASSET_LIBRARY_ROOT}/blender_assets.cats.txt`. In the future this is
to be expanded to support arbitrary CDFs (like one per blend file, one
per subdirectory, etc.).
The current implementation is based on the asset browser, which in
practice means that the asset browser owns the `AssetCatalogService`
instance for the selected asset library. In the future these instances
will be accessible via a less UI-bound asset system.
The UI is still very rudimentary, only showing the catalog ID for the
currently selected asset. Most notably, the loaded catalogs are not
shown yet. The UI is being implemented and will be merged soon.
#### Catalog Identifiers
Catalogs are internally identified by UUID. In older designs this was a
human-readable name, which has the problem that it has to be kept in
sync with its semantics (so when renaming a catalog from X to Y, the
UUID can be kept the same).
Since UUIDs don't communicate any human-readable information, the
mapping from catalog UUID to its path (stored in the Catalog Definition
File, CDF) is critical for understanding which asset is stored in which
human-readable catalog. To make this less critical, and to allow manual
data reconstruction after a CDF is lost/corrupted, each catalog also has
a "simple name" that's stored along with the UUID. This is also stored
on each asset, next to the catalog UUID.
#### Writing to Disk
Before saving asset catalogs to disk, the to-be-overwritten file gets
inspected. Any new catalogs that are found thre are loaded to memory
before writing the catalogs back to disk:
- Changed catalog path: in-memory data wins
- Catalogs deleted on disk: they are recreated based on in-memory data
- Catalogs deleted in memory: deleted on disk as well
- New catalogs on disk: are loaded and thus survive the overwriting
#### Tree Design
This implements the initial tree structure to load catalogs into. See
T90608, and the basic design in T90066.
Reviewed By: Severin
Maniphest Tasks: T91552
Differential Revision: https://developer.blender.org/D12589
|
|
Flags controlling link/append code are split between two enums, one in
`DNA_space_types.h` and one in `BLO_readfile.h`.
This commit:
- Moves flags exclusively used in WM and BLO code to `eBLOLibLinkFlags`
in `BLO_readfile.h`. Flags in `eFileSel_Params_Flag` from
`DNA_space_types.h` are now only the ones effectively used by the
file browser editor code too.
- Fixes some internal utils in `readfile.c` still taking `short` flag
parameter instead of proper `int` one.
NOTE: there are a few other flags that could probably be moved to
`eBLOLibLinkFlags` (at the very least `FILE_LINK`, probably also
`FILE_AUTOSELECT` and `FILE_ACTIVE_COLLECTION`), since those are not
effectively used by the file browser, and control linking/appending
behavior, not filebrowser behavior.
However for now think it's safer to not touch that.
|
|
This commit adds to ID struct a new optional 'weak reference' to a
linked ID (in the form of a blend file library path and full ID name).
This can then be used on next append to try to find a matching local ID
instead of re-making the linked data local again.
Ref. T90545
NOTE: ID re-use will be disabled for regular append for the time being
(3.0 release), and only used for assets. Therefore, this commit should
not change anything user-wise.
Differential Revision: https://developer.blender.org/D12545
|
|
This node can be used to fillet splines at control points to
create a circular arc.
The implementation roughly follows T89227's design.
The node works in two main modes: Bezier and Poly
* Bezier: Creates a circular arc at vertices by changing
handle lengths (applicable only for Bezier splines).
* Poly: Creates a circular arc by creating vertices (as
many as defined by the Count fields input) along
the arc (applicable for all spline types).
In both modes, the radius of the created arc is defined
by the Radius fields input.
The Limit Radius attribute can be enabled to prevent
overlapping when the defined radius exceeds the maximum
possible radius for a given point.
Reviewed By: Hans Goudey
Differential Revision: https://developer.blender.org/D12115
|
|
The old modifier had two modes, but it is better to keep separated as meshes.
The UI has changed to be more consistent, including a new column type of modifiers.
Note: The logic has not changed with the previous version of the modifier, just is a split on two modifiers..
Reviewed By: mendio, pablovazquez
Differential Revision: https://developer.blender.org/D12586
|
