| Age | Commit message (Collapse) | Author |
|---|
|
This reverts commit 2a9cfdac7e126e37afb82e15a131717041f3d2f8.
|
|
This reverts commit 5e6fdaa07fff907e02b36813ccde0702bad4fb4d.
|
|
This reverts commit 1d1855e95f916685fed970904fc37701a4a0e031.
|
|
This feature has been desired for some time:
- https://rightclickselect.com/p/ui/Tqbbbc/allow-navigating-while-transforming (See comments);
- D1583;
- T37427;
In short, blocking navigation during transform limits the user to move the object only to visible areas within the screen and hinders the allocation of objects within closed meshes.
The node editor is also impaired because some nodes are far between them and the connectors are too small.
The only disadvantage of this patch (as I see it) is the conflict with the existing key map:
MIDDLEMOUSE:
- enable axis constrain in 3D view;
WHEELDOWNMOUSE, WHEELUPMOUSE, PAGEUPKEY, PAGEDOWNKEY:
- change the threshold of the proportional edit;
So the patch solution was to change these keymaps:
- MIDDLEMOUSE to Alt+MIDDLEMOUSE;
- WHEELDOWNMOUSE, WHEELUPMOUSE, PAGEUPKEY, PAGEDOWNKEY to Alt+(corresponding key);
When you use this new keymap for the first time in the proportional edit, it may seem strange due to the custom of using it (both in View2D and View3D).
But quickly the user gets used to it.
Alternatively we can add an option to the user preferences ([] Allow navigating while transforming). (I'm not much fan of this option).
The patch was done on branch2.8. But maybe it's a good idea to apply it to 2.79
Differential Revision: https://developer.blender.org/D2624
|
|
|
|
The Cycles accurate mode was removed, but the Eevee option for this has
a different meaning and should not have been removed. The Eevee accurate
makes cryptomatte accumulate for every sample, which Cycles has always
done regardless of any option.
|
|
Due to asynchronous process, the preview for a given image may be
generated several times.
This regenerates many thumbs unnecessarily.
The solution is to add the `FILE_ENTRY_PREVIEW_LOADING` flag for file
entries that are still in the thread queue.
So this flag is checked not to redraw the thumb when it is still being
created on a different thread.
Differential Revision: https://developer.blender.org/D11150
|
|
|
|
Add a new "experimental" debug option `show_asset_debug_info`, and use
that to determine the visibility of the active asset's catalog UUID and
simple name. Previously this was only determined by the "Developer
Extras" option, which meant it was visible in too many situations. It's
not really a "developer extra", and really just a debugging tool, so the
new option is more in line with its purpose.
Reviewed by: Severin
Differential Revision: https://developer.blender.org/D13242
|
|
Allow the use of floating-point values for font point sizes, which
allows greater precision and flexibility for text output.
See D8960 for more information, details, and justification.
Differential Revision: https://developer.blender.org/D8960
Reviewed by Campbell Barton
|
|
Support the ability to close relevant characters like '(', '[' and '{'.
It will also delete the pair character if they're empty.
Ref D13119
Reviewed By: campbellbarton
|
|
|
|
This combination was being repeated in some places.
|
|
Differential Revision: https://developer.blender.org/D13200
|
|
Currently, when creating a new node tree ID, its `typeinfo` is set to
`NodeTreeTypeUndefined`, but its `type` enum value is left to `0`,
aka `NTREE_SHADER`.
This patch adds a new `NTREE_UNDIFINED` value, and use it for
`NodeTreeTypeUndefined` types of node trees.
NOTE: While it is not clear whether that actually fixes issues currently,
quite a bit of code still relies on the value of `type`, so think it
makes sense to sanitize this.
NOTE: Would have been ideal to reserve `0` value to undefined type,
but at this point this is not possible anymore, so chose to use `-2` instead.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D13123
|
|
Previously, to get the declaration of a socket, one had to go
through `node->declaration`. Now this indirection is not necessary
anymore. This makes it easier to add more per-socket information
into the declaration and accessing it in various places.
Currently, this system is used by socket descriptions and node warnings
for unsupported geometry component types.
|
|
This is part of T92811.
Differential Revision: https://developer.blender.org/D13105
|
|
Adds a `wmOperatorCallContext` typedef for the existing `WM_OP_XXX`
operator context enum. This adds type safety, allows the compiler to
produce better warnings and helps understanding what a variable is for.
Differential Revision: https://developer.blender.org/D13113
Reviewed by: Campbell Barton
|
|
|
|
This is useful to allow the use of features made in C++.
Differential Revision: https://developer.blender.org/D13115
|
|
This shows a geometry's volume grids in the spreadsheet.
Three columns are displayed:
- Name: The text name of each grid
- Data type: Float, Vector, etc.
- Class: Fog volume, Level Set, or unkown
In the future, values of the voxels themselves could be displayed,
but that is a much more complex problem, with important performance
implications, etc.
Differential Revision: https://developer.blender.org/D13049
|
|
|
|
Previously, `ImageTile->ok` and `ImageUser->ok` were used to indicate
whether an image failed to load. There were three possible values
which (probably) had the following meanings:
* `0`: There was an error while loading the image. Don't try to load again.
* `1`: Default value. Try to load the image.
* `2`: The image was loaded successfully.
This image-wide flag did not make sense unfortunately, because loading
may work for some frames of an image sequence but not for others.
Remember than an image data block can also contain a movie.
The purpose of the `->ok` flag was to serve as an optimization to avoid
trying to load a file over and over again when there is an error (e.g. the
file does not exist or is invalid). To get the optimization back, the patch
is changing `MovieCache` so that it can also cache failed load attempts.
As a consequence, `ibuf` is allowed to be `NULL` in a few more places.
I added the appropriate null checks.
This also solves issues when image sequences are used with the
Image Texture node in Geometry nodes (also see D12827).
Differential Revision: https://developer.blender.org/D12957
|
|
Allows to avoid a global lock being held while reading files from disk,
solving performance issues when Cycles needs to read a lot of packed
images.
Simple test file F11597666
Differential Revision: https://developer.blender.org/D13032
|
|
Expose select & strip menus and shortcuts for sequencer preview.
|
|
Also justify rounding up font width.
|
|
This reverts commit e7fedf6dba5fe2ec39260943361915a6b2b8270a.
And also fix a compilation issue on windows.
Differential Revision: https://developer.blender.org/D12969
|
|
This reverts commit 03013d19d16704672f9db93bc62547651b6a5cb8.
This commit broke the windows build pretty badly and I don't
feel confident landing the fix for this without review.
Will post a possible fix in D12969 and we'll take it from there.
|
|
This adds generic attribute rendering support for meshes for Eevee and
Workbench. Each attribute is stored inside of the `MeshBufferList` as a
separate VBO, with a maximum of `GPU_MAX_ATTR` VBOs for consistency with
the GPU shader compilation code.
Since `DRW_MeshCDMask` is not general enough, attribute requests are
stored in new `DRW_AttributeRequest` structures inside of a convenient
`DRW_MeshAttributes` structure. The latter is used in a similar manner
as `DRW_MeshCDMask`, with the `MeshBatchCache` keeping track of needed,
used, and used-over-time attributes. Again, `GPU_MAX_ATTR` is used in
`DRW_MeshAttributes` to prevent too many attributes being used.
To ensure thread-safety when updating the used attributes list, a mutex
is added to the Mesh runtime. This mutex will also be used in the future
for other things when other part of the rendre pre-processing are multi-threaded.
`GPU_BATCH_VBO_MAX_LEN` was increased to 16 in order to accommodate for
this design.
Since `CD_PROP_COLOR` are a valid attribute type, sculpt vertex colors
are now handled using this system to avoid to complicate things. In the
future regular vertex colors will also use this. From this change, bit
operations for DRW_MeshCDMask are now using uint32_t (to match the
representation now used by the compiler).
Due to the difference in behavior for implicit type conversion for scalar types
between OpenGL and what users expect (a scalar `s` is converted to
`vec4(s, 0, 0, 1)` by OpenGL, vs. `vec4(s, s, s, 1)` in Blender's various node graphs) ,
all scalar types are using a float3 internally for now, which increases memory usage.
This will be resolved during or after the EEVEE rewrite as properly handling
this involves much deeper changes.
Ref T85075
Reviewed By: fclem
Maniphest Tasks: T85075
Differential Revision: https://developer.blender.org/D12969
|
|
This option allows the edge to end right at the border
instead of extending beyond.
Useful when having multiple camera setup where you
want the border to be clean.
Also moved overscan option down inside "Composition" sub panel
so it makes more sense.
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D12126
|
|
Allows line art camera to be different from scene active camera,
useful when baking multiple shots in different angle as
well as for motion graphics effect.
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D12047
|
|
Allows the user to turn off in_front option for grease pencil object
and offset strokes towards camera to allow depth interaction of the
rest of the scene.
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D12046
|
|
The viewer node has been expanded to have a field input next to the
geometry input. When both are connected (by ctrl+shift clicking on a node)
the spreadsheet will show the evaluated field on the geometry.
The operator to link to the viewer has become a bit smarter. It automatically
detects if it should link to the geometry or field input. In the future some more
smartness could be added, such as automatically relinking the "right" geometry
when viewing a field.
Internally, there are two major changes:
* Refactor of what happens when ctrl+shift clicking on a node to link to
a viewer. The behavior of the geometry nodes viewer is a bit more complex
than that of the compositor viewers. The behavior in compositing nodes
should not have changed. Any change should be reported as a bug (and then
we can decide if it's worse than before or if it needs fixing).
* Evaluation, display and caching of fields in the spreadsheet editor.
Differential Revision: https://developer.blender.org/D12938
|
|
Adds navigation transforms (pose, scale) to the XR session state that
will be applied to the viewer/controller poses. By manipulating these
values, a viewer can move through the VR viewport without the need to
physically walk through it.
Add-ons can access these transforms via Python
(XrSessionState.navigation_location/rotation/scale) to use with custom
operators.
Also adds 3 new VR navigation operators that will be exposed to users
as default actions in the VR Scene Inspection add-on. While all three
of these operators have custom properties that can greatly influence
their behaviors, for now these properties will not be accessible by
users from the UI. However, other add-ons can still set these custom
properties if they desire.
1). Raycast-based teleport
Moves the user to a location pointed at on a mesh object. The result
can optionally be constrained to specific axes, for example to achieve
"elevation snapping" behavior by constraining to the Z-axis. In
addition, one can specify an interpolation factor and offset.
Credit to KISKA for the elevation snapping concept.
2). "Grab" navigation
Moves the user through the viewport by pressing inputs on one or two
held controllers and applying deltas to the navigation matrix based on
the displacement of these controllers. When inputs on both controllers
are pressed at the same time (bimanual interaction), the user can scale
themselves relative to the scene based on the distance between the
controllers.
Also supports locks for location, rotation, and scale.
3). Fly navigation
Navigates the viewport by pressing a button and moving/turning relative to
navigation space or the VR viewer or controller. Via the operator's
properties, one can select from a variety of these modes as well as
specify the min/max speed and whether to lock elevation.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D11501
|
|
The drag and drop feature of objects in 3D View has been modified to include:
- Snap the object being dragged.
- Visual feedback through a box and the placement tool grid.
Maniphest Tasks: T90198
Differential Revision: https://developer.blender.org/D12912
|
|
This is information you'd typically want to be visible in the UI. It's optional
of course, so if not relevant, it can just remain unset.
|
|
Object types like empties, cameras or lamps will just end up as empty preview
images. We can think about ways to visualize them still, but meanwhile, don't
create such an empty preview.
Differential Revision: https://developer.blender.org/D10334
Reviewed by: Bastien Montagne, Sybren Stüvel
|
|
This adds a new image texture node for geometry nodes. It does not
reuse the same node that is used in shading, because we want to be
able to expose the image and frame as sockets.
There is a known update issue when a movie or image sequence is
used. That will be fixed separately (also see D12957).
Currently, the image socket is just a pointer to an Image ID data block.
This can contain single images but also movies and image sequences.
In the future, the definition of an image socket can be expanded to
include images that are generated from scratch in the node tree.
For more details read the discussion in D12827.
Some of the code is a direct port from cycles and should be cleaned
up a bit in the future. For example `image_cubic_texture_lookup`.
For still images, the frame input is ignored. Otherwise, the frame
has to be in a valid range for the node to work. In the future we
may add e.g. automatic looping functionality.
Differential Revision: https://developer.blender.org/D12827
|
|
These nodes just output a single value of their respective types,
making it possible to control multiple inputs with the same value.
Differential Revision: https://developer.blender.org/D12932
|
|
Camera, lattice and speaker object types were missing there own proper
`USER_DUP_` flags, leading to not properly handling duplication of their
object data.
NOTE: We could probably simply opions here, by using categories (like
'GEOMETRY', 'SHADING', etc.) instead of exact object types. But this is
beyond bugfix scope.
|
|
This patch includes code from D9891 and D12754, so credit goes to Juanfran and Dalai.
I updated the patches to work with `master` and with the new overlay toggle.
The reason to include both changes as part of one patch is that the dimmed dashed lines work much better together with colored wires.
Theme setting for dash opacity:
{F11370574, size=full}
{F11286177, size=full, autoplay, loop}
{F11149912, size=full}
For adding the overlay I used `SpaceImageOverlay` as reference, although I'm not familiar with this code so there might be mistakes.
Reviewed By: #user_interface, HooglyBoogly
Differential Revision: https://developer.blender.org/D12886
|
|
Since 2D cursor will be used rarely in VSE and it is adding visual
noise, it will be hidden by default.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12933
|
|
|
|
|
|
|
|
This patch includes an updated version of the raycast node that uses
fields instead of attributes for inputs instead of outputs. This makes
the node's UI much clearer. It should be faster too, since the
evaluation system for fields provides multi-threading.
The source position replaces the input geometry (since this node is
evaluated in the context of a geometry like the other field nodes).
Thanks to @guitargeek for an initial version of this patch.
Differential Revision: https://developer.blender.org/D12638
|
|
|
|
- Rename RNA SpaceSeq.show_strip_overlay to show_overlays
matching the 3D View, the term "strip" was misleading as this is used
for the preview as well.
- Rename various RNA overlay settings to overlay_frame
since "Frame Offset" is a specific feature, avoid having both
Editor.show_overlay and SpaceSeq.show_overlays.
- Rename Editing `over_*` -> `overlay_frame_*` in DNA,
as well as flags.
|
|
|
|
Back in Blender 2.30, the GUI project brought panels into Blender among other important visual updates.
For the first time it was possible to move the wall of buttons around. Providing a clear separation
between sections (it even allowed the grouping of panels in tabs!)
During the 2.5 redesign, the separation between panels became a line on top of each panel, and panels received
theme settings for background and header colors. The default theme used the same color for both.
In 2.8 the background color of panels was different from headers in the default theme, so the separator
line was removed. While the separator line wasn't elegant (only on top, non-themeable, hard-coded emboss effect),
it provided a sort of separation between panels.
This patch solves the panels-separation by simply adding a margin space around them (not visible in default theme yet).
Even though the margin reduces the width of the working area slightly, it makes room for the upcoming always-visible scrollbars.
Other adjustments:
* Use arrow icon instead of triangle to collapse/expand
* Use rounded corners to match the rest of the UI (editor corners, nodes, etc).
{F10953929, size=full}
Margin on panels makes use of the `style->panelouter` property that hasn't been
used in a while. Also slight tweaks to `boxspace` and `templatespace` style properties so they
are multiples of 2 and operations on them round better.
There is technically no need to update the themes for them to work, so no theme changes are included in this patch.
{F10953931, size=full}
{F10953933, size=full}
{F10953934, size=full}
{F10954003, size=full}
----
A new theme setting under Style controls the roundness of all panels (added it to Style instead of ThemeSpace because I think controlling the panel roundness per editor is a bit overkill):
{F11091561, size=full, autoplay, loop}
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D12814
|
