Age | Commit message (Collapse) | Author |
|
Patch #21712 from Xavier Thomas.
now updates in real time as you pull the line.
|
|
|
|
* #20833: layer brush doesn't work with multires.
* #20946: sculpt mode partially removes parts of the mesh in the viewport.
* #20420: grab brush stops after moving some distance.
* #20906: sculpt grab tool moves in wrong direction.
* #21132 and #21272: undo on object with subdivision surface modifier crashes.
* #21115: subsurf + multires + sculpting + undo causes crash.
* #20683: sculpt + multires apply + undo crash.
* #19094: wrong outline in solid mode.
|
|
|
|
didnt commit this patch because curves are generally better to create a shape to lathe however now that curves can have modifiers applied to them I think its good to have this.
Added options to offset the lathe so it can work like the screw tool as well.
- optional object for axis which also controls the center point.
- screw offset so rather then just lathing this can work more like the screw tool.
- screw optionally using the object distance along the axis.
- iterations so the screw can be applied multiple times.
tested to work well with curves.
|
|
27562, 27570, 27571, 27574, 27576, 27577, 27579, 27590, 27591, 27594, 27595, 27596, 27599, 27605, 27611, 27612, 27613, 27614, 27623
|
|
- moved global hide_dot to filelist.
- hiding dot files is now included in the filtering of files, which means that for this directory also doesn't have to be read anymore.
- reverted changes of rev. 27491 and related changes in rev. 27523 in favor of a more general abstraction for the different 'file browser modes' with respect to filtering.
|
|
This commit started out aiming to make the "Stepped" F-Modifier (committed last night) even more useful, but ended up fixing a few other finer-points of how F-Modifiers work.
Firstly, the new stuff:
I've addded options to the Stepped F-Modifier to not affect frames before and/or after specified values, and renamed the 'start offset' to 'offset' for clarity.
The main objective of this is to allow Stepped F-Modifiers to only affect certain time ranges, so that by layering/using multiple instances of the F-Modifier, it can be possible to have multiple stepping-sizes.
This allows for effects like:
http://www.pasteall.org/blend/2230
or in words, it provides a convenient mechanism for animators to specify whether sections of the animation is shown "on twos", "fours", or even "forty-second-ths plus a smidgen", as can be easily done with 2D.
Assorted changes to support this:
* Properly fixed up how F-Modifiers that work with time, evaluate the time to evaluate the curve at. Now layered time effects like this should be possible in a much nicer way.
* Added proper value range validation/clamping to many properties. There are still a lot more that need checking, but at least more properties now do "the right thing".
|
|
* Copy/Paste operators for F-Modifiers
Available in Graph and NLA Editors. Use the Copy/Paste buttons beside the 'Add Modifier' buttons.
Copy copies all the modifiers of the ACTIVE F-Curve or Strip depending on the editor.
Paste pastes modifiers from the buffer to all the selected F-Curves or Strips, adding the new modifiers to the ends of each list.
* 'Stepped Interpolation' F-Modifier
This modifier holds each interpolated value from the F-Curve for several frames without changing the timing.
This allows to preview motions 'on-twos' for example without altering the timing, or having to go through setting heaps of keyframes. In this case, Andy wanted to use this for CG <-> StopMo.
|
|
Add new option named "Fill deformed". If this option is switched on.
2D curve will be first deformed by modifiers and only then be filled
with faces.
|
|
(commit 27538 by Campbell from render25 branch)
|
|
drawing by default. since we use preview renders a lot the empties & armatures can get in the way also.
(commit 27511 by Campbell from render25 branch)
|
|
rendering and scrubbing settings.
still need to do a do_versions for this to work right without changing settings.
(commit 27442 by Campbell from render25 branch)
|
|
"free" axis. Upon scaling, this free axis scales normally, but the constraint forces the other two axes to adjust themselves appropriately so that overall bone volume is maintained. So, setting "Y" as the free axis (the default) creates a bone that automatically squashes and stretches when scaling. Thanks to Aligorith, Fweeb, Cessen and others for the feedback.
|
|
After a few days of wrong turns and learning the finer points of RNA-type-subclassing the hard way, this commit finally presents a refactored version of the Keying Sets system (now version 2) based on some requirements from Cessen.
For a more thorough discussion of this commit, see
http://sites.google.com/site/aligorith/keyingsets_2.pdf?attredirects=0&d=1
------
The main highlight of this refactor is that relative Keying Sets have now been recoded so that Python callbacks are run to generate the Keying Set's list of paths everytime the Keying Set is used (to insert or delete keyframes), allowing complex heuristics to be used to determine whether a property gets keyframed based on the current context. These checks may include checking on selection status of related entities, or transform locks.
Built-In KeyingSets have also been recoded, and moved from C and out into Python. These are now coded as Relative Keying Sets, and can to some extent serve as basis for adding new relative Keying Sets. However, these have mostly been coded in a slightly 'modular' way which may be confusing for those not so familiar with Python in general. A usable template will be added soon for more general usage.
Keyframing settings (i.e. 'visual', 'needed') can now be specified on a per-path basis now, which is especially useful for Absolute Keying Sets, where control over this is often beneficial.
Most of the places where Auto-Keyframing is performed have been tidied up for consistency. I'm sure quite a few issues still exist there, but these I'll clean up over the next few days.
|
|
While the folder icon was originally planned when in append/link mode, it's easier to distinguish with a blender icon, so the folder icon is now replaced.
Also fixed issue introduced in rev. 27491 where filter settings were incorrectly set when moving out of .blend file again.
|
|
because the mipmap was not being refreshed. Also this will be problematic
to support when I add tile/mipmap cache, so would not rather not try to.
Can be added back afterwards if someone wants to make it work.
|
|
|
|
channel by another channel or limit by max of remaining channels.
|
|
|
|
|
|
- Replaced hardcoded nurbcol array with theme colors
- Send notification in duplicate curve operator (this operator could
reset/change active nurb)
- Edge seam color added to the user preferences dialog
|
|
in compositor and outliner yet.
|
|
Revised the conditions under which motion paths get recalculated after transforms (when auto-keying is enabled). Now, the type of path display does not matter, but rather that the object/bone in question has any paths at all. This makes animating with these a much smoother experience.
|
|
'BLI_makestringcode' --> 'BLI_path_rel'
'BLI_convertstringcwd' --> 'BLI_path_cwd'
'BLI_convertstringframe' --> 'BLI_path_frame'
'BLI_convertstringframe_range' --> 'BLI_path_frame_range'
'BLI_make_cwdpath' --> 'BLI_path_cwd'
|
|
|
|
instead of flat/straight
|
|
|
|
warning, uses bad level call, will need to resolve very very soon!
|
|
size.
unrelated changes that ended up being more trouble to commit separate...
- removed BLI_split_dirfile(), was nasty, occasionaly modifying the source string, it could create directories and used the $CWD in some cases. was only used in 2 places in filesel.c, if this gives problems can address without bringing back this function.
renamed BLI_split_dirfile_basic --> BLI_split_dirfile
- view3d_operator_needs_opengl was being called for offscreen render when it wasnt needed.
|
|
animation. currently supports translate and extend.
TODO:
- select markers in dope sheet.
- transform time scale.
|
|
image.py has a function image_editor_guess(), please test on windows and mac. (using 'startfile' and 'open')
this is only used when the image editor is not set.
|
|
(and fix error in creator.c last commit)
|
|
* I put it under General->System. Not sure is the better place for it though (space_userpref.py)
** also: creator.c fix to avoid autoplay of games when scripts are disabled.
|
|
when sculpting and using it from material nodes.
|
|
and unchecked)
|
|
need to be stored in the operator type or in the module which isnt nice for modal operators.
|
|
|
|
|
|
* Effectors now work with hair dynamics.
* Hair dynamics has a new "Collider Friction" parameter that works similarly to internal friction except now all collision objects effect the hair velocity. Useful for quick'n'dirty interaction with objects as the calculations are really fast, but doesn't really take away the need for proper hair-object collisions.
|
|
autokeyframe_pose_cb_func needs to be used for all cases I think)
- copy, paste ID properties with pose
|
|
|
|
or AV-sync.
|
|
* Added a user-preference setting which disallows setting the current frame number to a negative number. This setting only applies when setting the current frame by scrubbing the time cursor in a timeline view, or by typing a value into the current frame number field.
* Made the minimum frame number for the start frame to be 0, which should make setting keyframes by a regular step size less confusing. Also changed the MINFRAME define to 0 for consistency. Hopefully this doesn't cause any problems with any output formats.
* Fixed some missing channel selection cases in animation editors.
|
|
- correct errors with non-mirrored meshes
- mirror weight paint on asymmetrical meshes
|
|
Added a new option to filter the out Object-level (i.e. transforms, object visibility/settings, and also bone animation) animation data from the channels list. As most of these settings are transforms, I've used the transform manipulator icon and named the RNA setting display_transforms.
This is useful when trying to filter out only material animation data for example, as requested by Colin.
|
|
Texture animation is now shown in the animation editors. Texture stacks are shown for each Material/Lamp/World block that uses them.
There is currently still a bit of a bug with this which means that unless the owner of the texture stack is animated too, the animation data for the textures won't show up. This will get rectified soon though.
|
|
it myself, there will still be render slots just old implementation.
|
|
image code, this should be clearer and makes reusing the Render struct later
on easier.
|
|
|