| Age | Commit message (Collapse) | Author |
|---|
|
This commit merge the full development done in greasepencil-object branch and include mainly the following features.
- New grease pencil object.
- New drawing engine.
- New grease pencil modes Draw/Sculpt/Edit and Weight Paint.
- New brushes for grease pencil.
- New modifiers for grease pencil.
- New shaders FX.
- New material system (replace old palettes and colors).
- Split of annotations (old grease pencil) and new grease pencil object.
- UI adapted to blender 2.8.
You can get more info here:
https://code.blender.org/2017/12/drawing-2d-animation-in-blender-2-8/
https://code.blender.org/2018/07/grease-pencil-status-update/
This is the result of nearly two years of development and I want thanks firstly the other members of the grease pencil team: Daniel M. Lara, Matias Mendiola and Joshua Leung for their support, ideas and to keep working in the project all the time, without them this project had been impossible.
Also, I want thanks other Blender developers for their help, advices and to be there always to help me, and specially to Clément Foucault, Dalai Felinto, Pablo Vázquez and Campbell Barton.
|
|
Edit doxy files and header guards only.
|
|
The ClayEngine was introduced to test the blender2.8 architecture during
development. As currently we have the wanted features implemented with
matcaps we are going to remove the clay engine as it was never intended
to be an official releasable engine
Note: The test cases are never run. But when enabled will be skipped as
they were implemented over the Clay Engine
|
|
Conflicts:
source/blender/editors/io/io_collada.c
source/blender/editors/object/object_bake.c
source/blender/editors/object/object_edit.c
source/blender/editors/render/render_internal.c
source/blender/makesrna/intern/rna_object_api.c
source/blenderplayer/bad_level_call_stubs/stubs.c
|
|
This will currently only work for the RelWithDebInfo configuration since asan
does not support the debug crt. for source line information in the reports,
you need a copy of llvm-symbolizer in the blender folder or set the
ASAN_SYMBOLIZER_PATH environment variable to point to it. Currently (as of
6.0.0) llvm-symbolizer does not ship with the binary clang/llvm distribution.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D3446
|
|
This patch adds support for:
- Per space-type tools (3D view and edit).
- Per mode tools (object, edit, weight-paint .. etc).
The top-bar shows the last activated tools options, this is a design
issue with using a global topbar to show per-space settings.
See D3395
|
|
This feature is limited (only byte PPM output, no multi-view),
only works with specific configurations.
This also causes some maintenance overhead
when testing changes to the render pipeline.
|
|
Folders removed entirely:
* //extern/recastnavigation
* //intern/decklink
* //intern/moto
* //source/blender/editors/space_logic
* //source/blenderplayer
* //source/gameengine
This includes DNA data and any reference to the BGE code in Blender itself.
We are bumping the subversion.
Pending tasks:
* Tile/clamp code in image editor draw code.
* Viewport drawing code (so much of this will go away because of BI removal
that we can wait until then to remove this.
|
|
rna_scene.c was getting way too big with data that was related to
DNA_layer_types.h.
I tried doing it earlier, but failed. But now with the new changes I think it's
better to do this sooner than later.
|
|
|
|
It has been deprecated since at least macOS 10.9 and fully removed in 10.12.
I am unsure if we should remove it only in 2.8. But you cannot build blender with it supported when using a modern xcode version anyway so I would tend towards just removing it also for 2.79 if that ever happens.
Reviewers: mont29, dfelinto, juicyfruit, brecht
Reviewed By: mont29, brecht
Subscribers: Blendify, brecht
Maniphest Tasks: T52807
Differential Revision: https://developer.blender.org/D2333
|
|
Deleting the old internal audaspace.
Major changes from there are:
- The whole library was refactored to use C++11.
- Many stability and performance improvements.
- Major Python API refactor:
- Most requested: Play self generated sounds using numpy arrays.
- For games: Sound list, random sounds and dynamic music.
- Writing sounds to files.
- Sequencing API.
- Opening sound devices, eg. Jack.
- Ability to choose different OpenAL devices in the user settings.
|
|
|
|
|
|
Initial support for Python/Manipulator integration
from 'custom-manipulators' branch.
Supports:
- Registering custom manipulators & manipulator-groups.
- Modifying RNA properties, custom values via get/set callbacks,
or invoking an operator.
- Drawing shape presets for Python defined manipulators (arrow, circle, face-maps)
Limitations:
- Only float properties supported.
- Drawing only supported via shape presets.
(we'll likely want a way to define custom geometry or draw directly).
- When to refresh, recalculate manipulators will likely need
integration with notifier system.
Development will be continued in the 2.8 branch
|
|
This makes manipulator access closer to operators,
and allows Python access.
This adds RNA for manipulators, but not Python registration yet.
- Split draw style into 2x settings:
`draw_style` (enum) & `draw_options` (enum-flag)
- Rename wmManipulator.properties -> properties_edit,
Use wmManipulator.properties for ID-properties.
Note that this area of the API will need further work since
manipulators now have 2 kinds of properties & API's to access them.
|
|
Probe is a real general term, the new name is used often in docs online.
|
|
We went for a new datablock because blending probe functionality with empties was going to be messy.
|
|
This commit does the main integration of workspaces, which is a design we agreed on during the 2.8 UI workshop (see https://wiki.blender.org/index.php/Dev:2.8/UI/Workshop_Writeup)
Workspaces should generally be stable, I'm not aware of any remaining bugs (or I've forgotten them :) ). If you find any, let me know!
(Exception: mode switching button might get out of sync with actual mode in some cases, would consider that a limitation/ToDo. Needs to be resolved at some point.)
== Main Changes/Features
* Introduces the new Workspaces as data-blocks.
* Allow storing a number of custom workspaces as part of the user configuration. Needs further work to allow adding and deleting individual workspaces.
* Bundle a default workspace configuration with Blender (current screen-layouts converted to workspaces).
* Pressing button to add a workspace spawns a menu to select between "Duplicate Current" and the workspaces from the user configuration. If no workspaces are stored in the user configuration, the default workspaces are listed instead.
* Store screen-layouts (`bScreen`) per workspace.
* Store an active screen-layout per workspace. Changing the workspace will enable this layout.
* Store active mode in workspace. Changing the workspace will also enter the mode of the new workspace. (Note that we still store the active mode in the object, moving this completely to workspaces is a separate project.)
* Store an active render layer per workspace.
* Moved mode switch from 3D View header to Info Editor header.
* Store active scene in window (not directly workspace related, but overlaps quite a bit).
* Removed 'Use Global Scene' User Preference option.
* Compatibility with old files - a new workspace is created for every screen-layout of old files. Old Blender versions should be able to read files saved with workspace support as well.
* Default .blend only contains one workspace ("General").
* Support appending workspaces.
Opening files without UI and commandline rendering should work fine.
Note that the UI is temporary! We plan to introduce a new global topbar
that contains the workspace options and tabs for switching workspaces.
== Technical Notes
* Workspaces are data-blocks.
* Adding and removing `bScreen`s should be done through `ED_workspace_layout` API now.
* A workspace can be active in multiple windows at the same time.
* The mode menu (which is now in the Info Editor header) doesn't display "Grease Pencil Edit" mode anymore since its availability depends on the active editor. Will be fixed by making Grease Pencil an own object type (as planned).
* The button to change the active workspace object mode may get out of sync with the mode of the active object. Will either be resolved by moving mode out of object data, or we'll disable workspace modes again (there's a `#define USE_WORKSPACE_MODE` for that).
* Screen-layouts (`bScreen`) are IDs and thus stored in a main list-base. Had to add a wrapper `WorkSpaceLayout` so we can store them in a list-base within workspaces, too. On the long run we could completely replace `bScreen` by workspace structs.
* `WorkSpace` types use some special compiler trickery to allow marking structs and struct members as private. BKE_workspace API should be used for accessing those.
* Added scene operators `SCENE_OT_`. Was previously done through screen operators.
== BPY API Changes
* Removed `Screen.scene`, added `Window.scene`
* Removed `UserPreferencesView.use_global_scene`
* Added `Context.workspace`, `Window.workspace` and `BlendData.workspaces`
* Added `bpy.types.WorkSpace` containing `screens`, `object_mode` and `render_layer`
* Added Screen.layout_name for the layout name that'll be displayed in the UI (may differ from internal name)
== What's left?
* There are a few open design questions (T50521). We should find the needed answers and implement them.
* Allow adding and removing individual workspaces from workspace configuration (needs UI design).
* Get the override system ready and support overrides per workspace.
* Support custom UI setups as part of workspaces (hidden panels, hidden buttons, customizable toolbars, etc).
* Allow enabling add-ons per workspace.
* Support custom workspace keymaps.
* Remove special exception for workspaces in linking code (so they're always appended, never linked). Depends on a few things, so best to solve later.
* Get the topbar done.
* Workspaces need a proper icon, current one is just a placeholder :)
Reviewed By: campbellbarton, mont29
Tags: #user_interface, #bf_blender_2.8
Maniphest Tasks: T50521
Differential Revision: https://developer.blender.org/D2451
|
|
|
|
Previously, every RenderPass would have a bitfield that specified its type. That limits the number of passes to 32, which was reached a while ago.
However, most of the code already supported arbitrary RenderPasses since they were also used to store Multilayer EXR images.
Therefore, this commit completely removes the passflag from RenderPass and changes all code to use the unique pass name for identification.
Since Blender Internal relies on hardcoded passes and to preserve compatibility, 32 pass names are reserved for the old hardcoded passes.
To support these arbitrary passes, the Render Result compositor node now adds dynamic sockets. For compatibility, the old hardcoded sockets are always stored and just hidden when the corresponding pass isn't available.
To use these changes, the Render Engine API now includes a function that allows render engines to add arbitrary passes to the render result. To be able to add options for these passes, addons can now add their own properties to SceneRenderLayers.
To keep the compositor input node updated, render engine plugins have to implement a callback that registers all the passes that will be generated.
From a user perspective, nothing should change with this commit.
Differential Revision: https://developer.blender.org/D2443
Differential Revision: https://developer.blender.org/D2444
|
|
Initial work by Clément Foucault with contributions from Dalai Felinto
(mainly per-collection engine settings logic, and depsgraph iterator placeholder).
This makes Blender require OpenGL 3.3. Which means Intel graphic card
and OSX will break. Disable CLAY_ENGINE in CMake in those cases.
This is a prototype render engine intended to help the design of real
render engines. This is mainly an engine with enphasis in matcap and
ambient occlusion.
Implemented Features
--------------------
* Clay Render Engine, following the new API, to be used as reference for
future engines
* A more complete Matcap customization with more options
* Per-Collection render engine settings
* New Ground Truth AO - not enabled
Missing Features
----------------
* Finish object edit mode
- Fix shaders to use new matrix
- Fix artifacts when edge does off screen
- Fix depth issue
- Selection sillhouette
- Mesh wires
- Use mesh normals (for higher quality matcap)
- Non-Mesh objects drawing
- Widget drawing
- Performance issues
* Finish mesh edit mode
- Derived-Mesh-less edit mode API (mesh_rende.c)
* General edit mode
- Per-collection edit mode settings
* General engines
- Per-collection engine settings
(they are their, but they still need to be flushed by depsgraph, and
used by the drawing code)
|
|
This reverts commit 5aa19be91263a249ffae75573e3b32f24269d890 and b4a721af694817fa921b119df83d33ede7d7fed0.
Due to postponement of particle system rewrite it was decided to put particle code
back into the 2.8 branch for the time being.
|
|
In addition to pack of conflicts listed below, also had to comment out particle part of new Alembic code... :/
Conflicts:
intern/ghost/intern/GHOST_WindowWin32.cpp
source/blender/blenkernel/BKE_effect.h
source/blender/blenkernel/BKE_pointcache.h
source/blender/blenkernel/intern/cloth.c
source/blender/blenkernel/intern/depsgraph.c
source/blender/blenkernel/intern/dynamicpaint.c
source/blender/blenkernel/intern/effect.c
source/blender/blenkernel/intern/particle_system.c
source/blender/blenkernel/intern/pointcache.c
source/blender/blenkernel/intern/rigidbody.c
source/blender/blenkernel/intern/smoke.c
source/blender/blenkernel/intern/softbody.c
source/blender/depsgraph/intern/builder/deg_builder_relations.cc
source/blender/gpu/intern/gpu_debug.c
source/blender/makesdna/DNA_object_types.h
source/blender/makesrna/intern/rna_particle.c
|
|
When WITH_INPUT_NDOF is disabled, 3D mouse handling code is removed
from:
- GHOST (was mostly done, finished the job)
- window manager
- various editors
- RNA
- keymaps
The input tab of user prefs does not show 3D mouse settings. Key map
editor does not show NDOF mappings.
DNA does not change.
On my Mac the compiled binary is 42KB smaller after this change. It
runs fine WITH_INPUT_NDOF on or off.
|
|
Conflicts:
release/scripts/startup/bl_ui/properties_particle.py
release/scripts/startup/bl_ui/properties_physics_cloth.py
release/scripts/startup/bl_ui/properties_physics_dynamicpaint.py
release/scripts/startup/bl_ui/properties_physics_softbody.py
source/blender/blenkernel/BKE_library.h
source/blender/blenkernel/BKE_particle.h
source/blender/blenkernel/intern/cloth.c
source/blender/blenkernel/intern/library.c
source/blender/blenkernel/intern/library_query.c
source/blender/blenkernel/intern/particle_system.c
source/blender/blenkernel/intern/scene.c
source/blender/blenkernel/intern/softbody.c
source/blender/blenloader/intern/readfile.c
source/blender/blenloader/intern/versioning_270.c
source/blender/editors/space_file/filesel.c
source/blender/editors/space_outliner/outliner_intern.h
source/blender/makesdna/DNA_ID.h
source/blender/makesdna/DNA_object_force.h
source/blender/makesdna/DNA_particle_types.h
source/blender/makesrna/intern/rna_particle.c
source/blender/makesrna/intern/rna_sculpt_paint.c
source/blender/makesrna/intern/rna_smoke.c
source/blender/makesrna/intern/rna_space.c
|
|
All in all, this patch adds an Alembic importer, an Alembic exporter,
and a new CacheFile data block which, for now, wraps around an Alembic
archive. This data block is made available through a new modifier ("Mesh
Sequence Cache") as well as a new constraint ("Transform Cache") to
somewhat properly support respectively geometric and transformation data
streaming from alembic caches.
A more in-depth documentation is to be found on the wiki, as well as a
guide to compile alembic: https://wiki.blender.org/index.php/
User:Kevindietrich/AlembicBasicIo.
Many thanks to everyone involved in this little project, and huge shout
out to "cgstrive" for the thorough testings with Maya, 3ds Max, Houdini
and Realflow as well as @fjuhec, @jensverwiebe and @jasperge for the
custom builds and compile fixes.
Reviewers: sergey, campbellbarton, mont29
Reviewed By: sergey, campbellbarton, mont29
Differential Revision: https://developer.blender.org/D2060
|
|
|
|
Applying cflags globally can be problematic especially with extern, intern libs.
Now flags from target named will be used when defined,
allowing for developers to define flags for modules they maintain.
Convention is CMAKE_CFLAGS_${UPPERCASE_TARGET_NAME}, (CXXFLAGS for C++).
eg: CMAKE_CFLAGS_BF_BLENDER, CMAKE_CFLAGS_MAKESDNA, CMAKE_CXXFLAGS_CYCLES_KERNEL
On Linux run `make help` for full list of names, MSVC shows these in the solution.
|
|
|
|
simulations.
This commits implements OpenVDB as an extra cache format in the Point
Cache system for smoke simulations. Compilation with the library is
turned off by default for now, and shall be enabled when the library is
present.
A documentation of its doings is available here: http://
wiki.blender.org/index.php/User:Kevindietrich/OpenVDBSmokeExport.
A guide to compile OpenVDB can be found here (Linux): http://
wiki.blender.org/index.php?title=Dev:Doc/Building_Blender/Linux/
Dependencies_From_Source#OpenVDB
Reviewers: sergey, lukastoenne, brecht, campbellbarton
Reviewed By: brecht, campbellbarton
Subscribers: galenb, Blendify, robocyte, Lapineige, bliblubli,
jtheninja, lukasstockner97, dingto, brecht
Differential Revision: https://developer.blender.org/D1721
|
|
|
|
- Add blentranslation `BLT_*` module.
- moved & split `BLF_translation.h` into (`BLT_translation.h`, `BLT_lang.h`).
- moved `BLF_*_unifont` functions from `blf_translation.c` to new source file `blf_font_i18n.c`.
|
|
Sergey.
- rename WITH_EXTERNAL_AUDASPACE to WITH_SYSTEM_AUDASPACE.
- rename C/PYAUDASPACE to AUDASPACE_C/PY
- simplifying cmake defines and includes.
- fixing include paths and enabling WITH_SYSTEM_AUDASPACE for windows.
- fixing scons building.
- other minor build system fixes.
|
|
|
|
- Added the cmake configuration option WITH_EXTERNAL_AUDASPACE.
- Fixes to build without standalone library as well.
|
|
This commit contains all the remained parts needed for initial integration of
OpenSubdiv into Blender's subdivision surface code. Includes both GPU and CPU
backends which works in the following way:
- When SubSurf modifier is the last in the modifiers stack then GPU pipeline
of OpenSubdiv is used, making viewport performance as fast as possible.
This also requires graphscard with GLSL 1.5 support. If this requirement is
not met, then no GPU pipeline is used at all.
- If SubSurf is not a last modifier or if DerivesMesh is being evaluated for
rendering then CPU limit evaluation API from OpenSubdiv is used. This only
replaces the legacy evaluation code from CCGSubSurf_legacy, but keeps CCG
structures exactly the same as they used to be for ages now.
This integration is fully covered with ifdef and not enabled by default
because there are several TODOs to be solved first:
- Face varying data interpolation is not really cleanly implemented for GPU
in OpenSubdiv 3.0. It is also not implemented for limit evaluation API.
This basically means we'll have really hard time supporting UVs.
- Limit evaluation only works with adaptivly subdivided meshes so far, which
basically means all the points of CCG are pushed to the limit. This gives
different result from old code.
- There are some serious optimizations possible on the topology refiner
creation, which would speed up initial OpenSubdiv mesh creation.
- There are some hardcoded asumptions in the GPU and DerivedMesh areas which
could be generalized.
That's something where Antony and Campbell can help, making it so the code
is structured in a way which is reusable by all planned viewport projects.
- There are also some workarounds in the dependency graph to make sure OpenGL
buffers are only freed from the main thread.
Those who'll be wanting to make experiments with this code should grab dev
branch (NOT master) from
https://github.com/Nazg-Gul/OpenSubdiv/tree/dev
There are some patches applied in there which we're working on on getting
into upstream.
|
|
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
|
|
|
|
Patch T36049 by @jeske
|
|
also minor warning cleanup
|
|
D389 by @kevindietrich
|
|
This returns a general status (success/no-convergence/other) along with
basic statistics (min/max/average) for the error value and the number
of iterations. It allows some general estimation of the simulation
quality and detection of critical settings that could become a problem.
Better visualization and extended feedback can follow later.
|
|
This is mainly to address old issue when one need to have SDL library installed
in order to use our official builds. Some hip distros already installs SDL,
but it's not quite the same across all the variety of the distros.
We also now switching to SDL-2.0, most of the distros have it in repositories
already, so it shouldn't be huge deal to install it if needed.
Reviewers: campbellbarton
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D878
|
|
|
|
https://developer.blender.org/D643
Separates graphics context creation from window code in Ghost so that they can vary separately.
|
|
Currently only summed number of traversal steps and intersections used by the
camera ray intersection pass is implemented, but in the future we will support
more debug passes which would help checking what things makes the scene slow.
Example of such extra passes could be number of bounces, time spent on the
shader tree evaluation and so.
Implementation from the Cycles side is pretty much straightforward, could only
mention here that it's a build-time option disabled by default.
From the blender side it's implemented as a PASS_DEBUG with several subtypes
possible. This way we don't need to create an extra DNA pass type for each of
the debug passes, saving us a bits.
Reviewers: campbellbarton
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D813
|
|
New render layer option named "View map cache" is added to reuse a
previously computed view map for subsequent rendering. The cache is
automatically updated when the mesh geometry of the input 3D scene has
been changed.
This functionality offers a major performance boost for Freestyle
animation rendering when camera-space mesh geometry is static, as well
as for repeated still renders with updates of line stylization options.
Although the "View map cache" toggle is a render layer option, the cache
memory is shared by all render layers and scenes. This means that if
Freestyle is used for two or more render layers (possibly in different
scenes through the compositor), then the cached view map for one render
layer is replaced by a new view map for another render layer and hence
no performance gain is expected.
|
|
|
|
|
