Age | Commit message (Collapse) | Author |
|
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
|
|
Based on discussions from T95355 and T94193, the plan is to use
the name "Curves" to describe the data-block container for multiple
curves. Eventually this will replace the existing "Curve" data-block.
However, it will be a while before the curve data-block can be replaced
so in order to distinguish the two curve types in the UI, "Hair Curves"
will be used, but eventually changed back to "Curves".
This patch renames "hair-related" files, functions, types, and variable
names to this convention. A deep rename is preferred to keep code
consistent and to avoid any "hair" terminology from leaking, since the
new data-block is meant for all curve types, not just hair use cases.
The downside of this naming is that the difference between "Curve"
and "Curves" has become important. That was considered during
design discussons and deemed acceptable, especially given the
non-permanent nature of the somewhat common conflict.
Some points of interest:
- All DNA compatibility is lost, just like rBf59767ff9729.
- I renamed `ID_HA` to `ID_CV` so there is no complete mismatch.
- `hair_curves` is used where necessary to distinguish from the
existing "curves" plural.
- I didn't rename any of the cycles/rendering code function names,
since that is also used by the old hair particle system.
Differential Revision: https://developer.blender.org/D14007
|
|
Display exact integer values of a floating point fields without
a fraction if the step is also an exact integer. This is intended
for cases when the value can technically be fractional, but most
commonly is supposed to be integer.
This handling is not applied if the field has any unit except frames,
because integer values aren't special for quantities like length.
The fraction is discarded in the normal display mode and when copying
the value to clipboard, but not when editing to remind the user that
the field allows fractions.
Differential Revision: https://developer.blender.org/D13753
|
|
When a manual frame range is set, allow marking an action as having
Cyclic Animation. This does not affect how the action is evaluated,
but the Cycle-Aware Keying option will automatically make any newly
added F-Curves cyclic. This allows using the option from the start
to build the cycle, rather than only for tweaking an existing loop.
The curves are made cyclic when they have only one key, either
after inserting the first key, or before adding the second one.
The latter case avoids the need to manually make the first added
curve cyclic after marking a newly added action cyclic.
Differential Revision: https://developer.blender.org/D11803
|
|
Some operations, e.g. adding a new action strip to NLA, require
knowing the active frame range of an action. However, currently it
can only be deduced by scanning the keyframes of the curves within
it. This is not ideal if e.g. curves are staggered for overlap.
As suggested by Nathan Vegdahl in comments to T54724, this patch adds
Action properties that allow manually specifying its active frame range.
The settings are exposed via a panel in the Dopesheet and Action Editor.
When enabled, the range is highlighted in the background using a striped
fill to distinguish it from the solid filled regular playback range.
When set, the frame range is used when adding or updating NLA tracks,
and by add-ons using `Action.frame_range`, e.g. FBX exporter.
Differential Revision: https://developer.blender.org/D11803
|
|
|
|
Warnings in tooltips were using inconsistent formatting, some in
parantheses, some not, some in caps, others not, some on new lines,
some not, etc.
This patch uses a consistent new line and no capitals for these cases.
Differential Revision: https://developer.blender.org/D9904
|
|
Approximately 138 changes in the spelling of compound words
and proper names like "Light Probe", "Shrink/Fatten", "Face Map".
In many cases, hyphens were used where they aren't correct, like
"re-fit". Other common changes include:
- "Datablock" -> "data-block"
- "Floating point" -> "floating-point"
- "Ngons" -> "n-gons"
These changes help give the language used in the interface
a consistent, more professional feel.
Differential Revision: https://developer.blender.org/D9923
|
|
Approximately 141 changes of capitalization to conform to MLA title style.
Differential Revision: https://developer.blender.org/D8392
Reviewed by Julian Eisel
|
|
A lot of animator request an option to invert the filter of the dopesheet channels. This patch adds that invert filter option. This is not for Grease Pencil only, affect to all modes.
{F8983328}
Note: I have seen the new button has a rounded borders on the left. It would be better get rectangle shape, but not sure how to do it.
Reviewed By: campbellbarton, pepeland
Maniphest Tasks: T81676
Differential Revision: https://developer.blender.org/D9182
c68a2a
|
|
This replaces the cmake options `WITH_NEW_OBJECT_TYPES` and
`WITH_NEW_SIMULATION_TYPE` with two experimental userpref settings:
* `use_new_particle_system`: Enables the point cloud type and the simulation editor.
* `use_new_hair_type`: Only displays the add-operator in the add menu for now.
Note, in the current state you can't do anything productive with the new particle
system or the new hair type. Features will be added step by step in the upcoming
weeks and months.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D8096
|
|
|
|
There are three different label styles for the three Dopesheet filter
labels:
- "Display Hidden", which uses "Display" rather than "Show" as the other
two options.
- "Show Errors", which does not use the word "only" to indicate it will
hide all the non-error channels.
- "Only Selected", so no "show" or "display" in the label at all.
This commit changes:
- Always use the word "Show", not "Display".
- Always use the word "Only" when enabling the filter hides everything
else.
Reviewed By: billreynish
Differential Revision: https://developer.blender.org/D7742
|
|
|
|
|
|
Only the volume object is exposed in the user interface. It is based on OpenVDB
internally. Drawing and rendering code will follow in another commit.
https://wiki.blender.org/wiki/Source/Objects/Volume
https://wiki.blender.org/wiki/Reference/Release_Notes/2.83/Volumes
Hair and PointCloud object types are hidden behind a WITH_NEW_OBJECT_TYPES
build option. These are unfinished, and included only to make it easier to
cooperate on development in the future and avoid tricky merges.
https://wiki.blender.org/wiki/Source/Objects/New_Object_Types
Ref T73201, T68981
Differential Revision: https://developer.blender.org/D6945
|
|
options
Update Dopesheet header to include missing buttons, remove Scene Active only buttton and also removed duplicated search box.
The removed options come from old 2.7x version and they are not required now.
Reviewed By: mendio, pepeland
Differential Revision: https://developer.blender.org/D7107
|
|
- Split 'verify_fcurve' into two functions:
ED_action_fcurve_ensure which adds the f-curve if needed.
ED_action_fcurve_find which returns NULL when not found.
Callers of ED_action_fcurve_find had unused 'group'
argument which has been removed.
- Rename verify_adt_action to ED_id_action_ensure
It had an argument to add data which was always true,
remove this instead of splitting in into a separate function.
|
|
|
|
The old layout of `PointerRNA` was confusing for historic reasons:
```
typedef struct PointerRNA {
struct {
void *data;
} id;
struct StructRNA *type;
void *data;
} PointerRNA;
```
This patch updates it to:
```
typedef struct PointerRNA {
struct ID *owner_id;
struct StructRNA *type;
void *data;
} PointerRNA;
```
Throughout the code base `id.data` was replaced with `owner_id`.
Furthermore, many explicit pointer type casts were added which
were implicit before. Some type casts to `ID *` were removed.
Reviewers: brecht, campbellbarton
Differential Revision: https://developer.blender.org/D5558
|
|
Allows to disable keyframes from movie clips in dopesheet.
Reviewers: brecht
Reviewed By: brecht
Subscribers: sebastian_k
Differential Revision: https://developer.blender.org/D5203
|
|
|
|
Most code uses ReportList argument last (or at least not first)
when an optional report list can be passed in.
|
|
A few icons were missed in the last update.
- Added dedicated icon for showing hidden objects in the Graph Editor
- Added new, more descriptive icon for F-Curve snapshots
- Tweaks for Toggle Full Screen and Collections icons
This should be the final set for 2.80.
Thanks to Andrzej Ambroż for contributing this icon set.
|
|
The goal is to prevent assignment of temporary or evaluated meshes
to objects from the main database.
Majority of the change is actually related on passing reports around.
On a positive side there are more error prints which can become more
visible to scripters.
There are still possible further improvements in the related areas.
For example, disable user counting for evaluated ID datablocks when
assignment happens. But can also happen later on as a separate
improvement.
Reviewers: brecht, campbellbarton, mont29
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D4884
|
|
I did not rename the other property to `show_expanded_dopesheet`
yet (as suggested in the report), because:
* Would break compatibility (haven't found any addon using it though).
* I'm not sure if this really only affects the dopesheet.
|
|
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
Mark specific properties as no-dependency-graph tag.
This is needed to avoid a centralized Copy-on-Write tag from RNA
pointer update.
|
|
Use dedicated flag to tag animation just for copy-on-write synchronization,
which makes it so copies of the original data blocks gets in sync with the
original ID. This will not flush the animation update to all objects which
depend on that animation.
If such flush is required, use ID_RECALC_ANIMATION.
Reviewers: brecht
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D4508
|
|
|
|
While \file doesn't need an argument, it can't have another doxy
command after it.
|
|
Move \ingroup onto same line to be more compact and
make it clear the file is in the group.
|
|
This commit adds a datablock filtering option for cache files channels,
so that a shot with lots of these in addition to standard animation
(e.g. the Spring production files) don't become bogged down by these.
Furthermore, these channels also respect the "Only Selected" toggle too now.
|
|
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
|
|
|
|
Set the names to match the original order again, to avoid breaking addons and
various places in the code that relied on them.
|
|
|
|
* Text editor word wrap, line numbers & syntax toggles now use consistent icons
that don’t change when you enable or disable them.
* Replaced icon toggle buttons in the snapping popover with normal checkboxes
and descriptive text labels. This makes it clearer which item is the main
radio button, is more consistent with other popovers, and allows us to use
more descriptive text.
* Added correct icons for grease pencil add menu.
* Added bespoke icons for grease pencil modifiers.
* Added icon for particle instance modifier.
* Added icon for fake user on & off states.
* Added correct icons for enabling/disabling modifiers in the dopesheet &
f-curve editor.
* Made it so the restrict viewport & restrict render toggles for modifier
update correctly when enabled or disabled, by flipping the order in the
icon sheet. This also required changing the outliner to match.
* Removed the few old remaining icons in the old style and made sure to replace
the last places where they were used.
* Updated many icons to be clearer & more consistent.
|
|
Only tag relations update when new f-curve was allocated. This solves
possible too slow keyframe insertion when doing character animation,
but still does proper relation update when new ID component became
animated.
|
|
This is a monochrome icon set, with a more modern look and icons for
various features that did not have a proper icon before.
|
|
Internally it's still mostly named lamps, though some modules like Cycles
were already calling them lights.
|
|
|
|
|
|
Now the name/collection filters run when there's some text,
and don't run when the box is empty, thus reducing an extra
step that was needed before these options could be used.
|
|
|
|
|
|
OVERVIEW
* In 2.7 terminology, all layers and groups are now collection datablocks.
* These collections are nestable, linkable, instanceable, overrideable, ..
which opens up new ways to set up scenes and link + override data.
* Viewport/render visibility and selectability are now a part of the collection
and shared across all view layers and linkable.
* View layers define which subset of the scene collection hierarchy is excluded
for each. For many workflows one view layer can be used, these are more of an
advanced feature now.
OUTLINER
* The outliner now has a "View Layer" display mode instead of "Collections",
which can display the collections and/or objects in the view layer.
* In this display mode, collections can be excluded with the right click menu.
These will then be greyed out and their objects will be excluded.
* To view collections not linked to any scene, the "Blender File" display mode
can be used, with the new filtering option to just see Colleciton datablocks.
* The outliner right click menus for collections and objects were reorganized.
* Drag and drop still needs to be improved. Like before, dragging the icon or
text gives different results, we'll unify this later.
LINKING AND OVERRIDES
* Collections can now be linked into the scene without creating an instance,
with the link/append operator or from the collections view in the outliner.
* Collections can get static overrides with the right click menu in the outliner,
but this is rather unreliable and not clearly communicated at the moment.
* We still need to improve the make override operator to turn collection instances
into collections with overrides directly in the scene.
PERFORMANCE
* We tried to make performance not worse than before and improve it in some
cases. The main thing that's still a bit slower is multiple scenes, we have to
change the layer syncing to only updated affected scenes.
* Collections keep a list of their parent collections for faster incremental
updates in syncing and caching.
* View layer bases are now in a object -> base hash to avoid quadratic time
lookups internally and in API functions like visible_get().
VERSIONING
* Compatibility with 2.7 files should be improved due to the new visibility
controls. Of course users may not want to set up their scenes differently
now to avoid having separate layers and groups.
* Compatibility with 2.8 is mostly there, and was tested on Eevee demo and Hero
files. There's a few things which are know to be not quite compatible, like
nested layer collections inside groups.
* The versioning code for 2.8 files is quite complicated, and isolated behind
#ifdef so it can be removed at the end of the release cycle.
KNOWN ISSUES
* The G-key group operators in the 3D viewport were left mostly as is, they
need to be modified still to fit better.
* Same for the groups panel in the object properties. This needs to be updated
still, or perhaps replaced by something better.
* Collections must all have a unique name. Less restrictive namespacing is to
be done later, we'll have to see how important this is as all objects within
the collections must also have a unique name anyway.
* Full scene copy and delete scene are exactly doing the right thing yet.
Differential Revision: https://developer.blender.org/D3383
https://code.blender.org/2018/05/collections-and-groups/
|
|
|
|
internal flags.
This gives us 9 flags available again for properties (we had none anymore),
and also makes things slightly cleaner.
To simplify (and make more clear the differences between mere properties
and function parameters), also added RNA_def_parameter_flags function (and
its clear counterpart), to be used instead of RNA_def_property_flag for
function parameters.
This patch is also a big cleanup (some RNA function definitions were
still using 'prop' PropertyRNA pointer, etc.).
And yes, am aware this will be annoying for all branches, but we really need
to get new flags available for properties (will need at least one for override, etc.).
Reviewers: sergey, Severin
Subscribers: dfelinto, brecht
Differential Revision: https://developer.blender.org/D2400
|