Age | Commit message (Collapse) | Author |
|
Since {rB46aa70cb486d}, using `NC_SPACE | ND_SPACE_VIEW3D` as notifier is
restricted to space data as a reference. This was still used though for
RNA updates in other places (namely `rna_camera`, `rna_scene`,
`rna_animviz`), and passing NULL would automatically set the notifier
reference to the owner id. Above commit would happily filter these out,
leading to missing refreshes.
Now use more specific notifiers (in case of animviz a new
`ND_DRAW_ANIMVIZ` was added).
This was reported for Camera background images btw.
Fixes T86670.
Maniphest Tasks: T86670
Differential Revision: https://developer.blender.org/D10758
|
|
In Blender, we used to use the term 'draw' to refer to information
displayed to the user. For version 2.80, it was decided to change these
instances to 'display' instead. This was to avoid the ambiguity between
end-user drawing tools and display options.
From the Oxford English Dictionary:
- Draw: produce (a picture or diagram) by making lines and marks on
paper with a pencil, pen, etc.
- Display: show (data or an image) on a computer, television, or
other screen.
Therefore, we should use draw when referring to drawing tools for
making marks, but use display when referring to information
shown/displayed to the user. From a user POV, the computer displays
certain information, whereas the user draws a mark.
Apparently this change was not implemented consistently, so this patch
changes all remaining relevant instances of "draw".
Differential Revision: https://developer.blender.org/D10551
|
|
|
|
|
|
There were two strange things going on:
- Start frame was clamped to 1, even when frame 0 is always a valid number.
This also ignored the 'Allow Negative Frames' user preference.
- Start frame was only clamped when setting the end frame, so first setting
the end frame and then the start frame would result in a different result
than doing it in the opposite order.
This commit fixes both issues by:
- Clamping the lower bound of the start frame only if negative frames are
not allowed, and
- apply that clamp both when setting the start and the end frame.
|
|
Differential Revision: https://developer.blender.org/D5716
|
|
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
While \file doesn't need an argument, it can't have another doxy
command after it.
|
|
Most of this code is deprecated for many years already and does not
work at all in Blender 2.8.
Reviewers: brecht, aligorith
Differential Revision: https://developer.blender.org/D4271
|
|
Move \ingroup onto same line to be more compact and
make it clear the file is in the group.
|
|
Needed for clan-format not to wrap onto one line.
|
|
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
|
|
|
|
bone needing to have any paths itself)
This commit introduces the following changes:
* Modified the poll callback on the "Update Paths" operator for bones
so that it only checks if there are bones that have motion paths
(instead of checking whether the active bone has paths).
This makes it easier to update paths without having to first select one
that has them - useful when the paths are all on hidden/hard-to-select bones.
* Add a readonly property, "has_motion_paths" to the animviz.motion_path
RNA struct, providing easier access to the internal flag used above.
This makes it possible for the UI to display the "Update" button without
having to check various bones for motion paths.
Notes:
* The flag being used in these changes already existed, and was only really
intended for internal use. However, since it was already used in many places
for determining if auto-update of all bone paths was needed (e.g. after certain
editing ops), it should be safe to use here too.
* The update_paths operator currently bakes all paths when activated, so there's
currently no loss of functionality with changing to not checking if the active
bone has any paths (e.g. we couldn't only update the active bone only either).
That is still listed as a todo in the code.
|
|
Practically all access to enum data is read-only.
|
|
New options to define the style of the animation paths in order to get
better visibility in complex scenes.
Now is possible define the color, thickness and several options relative
to the style of the lines used to draw motion path.
|
|
Definitions could shadow local vars.
|
|
Similar to addons -> add-ons, for reading it fits better to hyphenate.
|
|
preview"
Looks like this does not work for animators here after all, will use a
different code for this (probably not hardcoded)
This reverts commit 3bbb4020e7f0fae80a5edd31e19b7fa97d2149e4.
|
|
settings into account.
|
|
input, instead make sure the end-start values are sane instead
|
|
used elsewhere.
also minor style cleanup.
|
|
|
|
normalise->normalize).
|
|
|
|
This commit refactors the way that the Motion Paths GUI works. The key problems
this tries to address are:
1) Mode error - Confusion about whether we're dealing with the Object or Pose
level Motion Paths panel
2) Display settings vs Baking Settings
In line with the original design intentions for the 2.5/6 Properties Editor,
I've now split out the actual baking-related settings away from the Properties
Editor:
* Now, when clicking "Calculate Paths" from the toolbar, you'll be prompted with
a dialog to select the start/end frames (and for bones, whether to bake from
heads or tails). This is less confusing than relying on firstly setting the
range via the display range settings (and baking using that), since many people
apparently only used the "around current" mode, and were confused why things
weren't working
* Added a display of the frame ranges of the current baked Motion Path on the
active Object/Bone. This makes it clearer/easier to debug if the path suddenly
starts disappearing after a certain frame.
* Replaced Calculate/Clear Paths in the panels with a single "Update" button if
there's already a baked Motion Path.
Hopefully these changes (in combination with some of the other bugfixes) will
make it more obvious how everything works.
|
|
Note about long lines: I did not touch to two pieces of code (because I don’t see any way to keep a nicely formated, compact code, with shorter lines):
* The node types definitions into rna_nodetree_types.h
* The vgroup name functions into rna_particle.c
|
|
Addresses:
* C++ comments.
* Spaces after if/for/while/switch statements.
* Spaces around assignment operators.
|
|
* Made it impossible to try to calculate/create new motion paths lasting 0
frames (i.e. 250 to 250) since we cannot allocate a zero-length array for these.
Start frame can now be at most end-frame - 1, and end frame at least start frame
+ 1
* If an invalid configuration does occur, warnings/reports will now be issued in
response to this instead of silently failing (as per this bugreport).
|
|
Causing a flurry of refresh file prompts post-commit,
Confusing local diffs and causing merge conflicts,
Stating the obvious; redundant and useless...
We shall not miss thou, blasted expand $keywords$
|
|
|
|
|
|
- move GS() define into DNA_ID.h
- add BLI_utildefines as an automatic include with makesrna generated files.
|
|
MAKE_ID, FILE_MAXDIR, moved the generic defines to BLI_utildefines.h.
no functional changes.
|
|
Added an operator "Update Animation Data",
access from the search menu to update drivers and fcurves.
|
|
|
|
least its very unlikely).
|
|
|
|
|
|
These are not animated and are best not change names like this too late in the release.
ActionGroup.selected -> select: boolean Action Group is selected
BezierSplinePoint.hidden -> hide: boolean Visibility status
BezierSplinePoint.selected_control_point -> select_control_point: boolean Control point selection status
BezierSplinePoint.selected_handle1 -> select_left_handle: boolean Handle 1 selection status
BezierSplinePoint.selected_handle2 -> select_right_handle: boolean Handle 2 selection status
Bone.restrict_select -> hide_select: boolean Bone is able to be selected
Bone.selected -> select: boolean
CurveMapPoint.selected -> select: boolean Selection state of the curve point
EditBone.restrict_select -> hide_select: boolean Bone is able to be selected
EditBone.selected -> select: boolean
EditBone.selected_head -> select_head: boolean
EditBone.selected_tail -> select_tail: boolean
EditBone.locked -> lock: boolean Bone is not able to be transformed when in Edit Mode
EditBone.hidden -> hide: boolean Bone is not visible when in Edit Mode
NEGATE * FCurve.disabled -> enabled: boolean F-Curve could not be evaluated in past, so should be skipped when evaluating
FCurve.locked -> lock: boolean F-Curve's settings cannot be edited
FCurve.muted -> mute: boolean F-Curve is not evaluated
FCurve.selected -> select: boolean F-Curve is selected for editing
NEGATE * FCurve.visible -> hide: boolean F-Curve and its keyframes are shown in the Graph Editor graphs
FCurveSample.selected -> select: boolean Selection status
GPencilFrame.selected -> select: boolean Frame is selected for editing in the DopeSheet
GPencilLayer.locked -> lock: boolean Protect layer from further editing and/or frame changes
GPencilLayer.selected -> select: boolean Layer is selected for editing in the DopeSheet
Keyframe.selected -> select: boolean Control point selection status
Keyframe.selected_handle1 -> select_left_handle: boolean Handle 1 selection status
Keyframe.selected_handle2 -> select_right_handle: boolean Handle 2 selection status
MeshEdge.selected -> select: boolean
MeshEdge.hidden -> hide: boolean
MeshFace.hidden -> hide: boolean
MeshFace.selected -> select: boolean
MeshVertex.hidden -> hide: boolean
MeshVertex.selected -> select: boolean
MotionPathVert.selected -> select: boolean Path point is selected for editing
NlaStrip.selected -> select: boolean NLA Strip is selected
NlaTrack.locked -> lock: boolean NLA Track is locked
NlaTrack.muted -> mute: boolean NLA Track is not evaluated
NlaTrack.selected -> select: boolean NLA Track is selected
Object.restrict_render -> hide_render: boolean Restrict renderability
Object.restrict_select -> hide_select: boolean Restrict selection in the viewport
Object.restrict_view -> hide: boolean Restrict visibility in the viewport
Object.selected -> select: boolean Object selection state
ObjectBase.selected -> select: boolean Object base selection state
PoseBone.selected -> select: boolean
Sequence.right_handle_selected -> select_right_handle: boolean
Sequence.selected -> select: boolean
SplinePoint.selected -> select_control_point: boolean Selection status
TimelineMarker.selected -> select: boolean Marker selection state
Sequence.left_handle_selected -> select_left_handle: boolean
ActionGroup.locked -> lock: boolean Action Group is locked
Bone.hidden -> hide: boolean Bone is not visible when it is not in Edit Mode (i.e. in Object or Pose Modes)
SplinePoint.hidden -> hide: boolean Visibility status
FModifier.muted -> mute: boolean F-Curve Modifier will not be evaluated
note: rebaned uv_select to select_uv
|
|
- #22155: keyframe dots not shown on path for bone keyframes that aren't in a group with a matching name. Since this situation is going to become more common in 2.5, I've added an option which will alternatively just search the entire action to find all F-Curves associated with bones. The old option is still the default though for the general cases.
- When keyframe drawing is enabled, the current frame will also be indicated on the path now as a (bigger) green dot, as requested by William. This makes it easier to see the position on the path on the current frame.
|
|
in terms of how they deal with the current 'mode'
|
|
mistakes in makesrna
|
|
|
|
|
|
|
|
|
|
|
|
|