| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
* Replaced the hard coded viscosity presets with Python ones.
* Added version check, so older files load fine.
Loading new files into 2.62 also works fine.
|
|
|
|
|
|
a) Remove "animatable" flag from resolution property
b) "Hide fluid surface": Add description and changed prperty name. Nobody really understood the purpose of that checkbox.
|
|
|
|
Note about long lines: I did not touch to two pieces of code (because I don’t see any way to keep a nicely formated, compact code, with shorter lines):
* The node types definitions into rna_nodetree_types.h
* The vgroup name functions into rna_particle.c
|
|
Addresses:
* C++ comments.
* Spaces after if/for/while/switch statements.
* Spaces around assignment operators.
|
|
This was a request by Daniel Salazar. It adds a new frame offset variable to fluid sim settings, which can be used to display baked fluid sims at different times. Eventually this could be replaced by real NLA strips for cached data, but until then this is a simple way to have more flexible cache result usage.
Not strictly a BCon3 patch, but after IRC discussion with Genscher, ZanQdo and kaito decided to commit it anyway, since it's a small feature and makes fluid sim a bit more usable. Similar patch for point cache (particles, smoke, cloth) is being worked on as well.
|
|
This commit restores support for freezing or speeding up physics sims. Animate
the "Speed" parameter under Domain->Time, which controls a multiplier factor for
the rate at which the sim proceeds (i.e. the old "Fac-Tim" setting).
Notes:
* Subversion bumped to 4 to patch up defaults for new value so that old sim
files will still run correctly
* Names/descriptions could do with some tweaking
* Porting this across was not that obvious since quite a bit of stuff had
changed (as in, been cleaned up). However, from tests so far, it seems to work
well.
|
|
|
|
|
|
- use BLI_join_dirfile for joining all paths (no need to ensure slash is appended).
- paths from linked library files now supported.
|
|
* Fluid compilation: Inverse the compile flag from DISABLE_ELBEEM to WITH_MOD_FLUID for consistency. (scons/cmake)
* Use WITH_BF_FLUID in your user config (scons)
* Add support for scons to disable build with Decimate and Boolean modifier.
(WITH_BF_DECIMATE and WITH_BF_BOOLEAN)
|
|
|
|
http://markmail.org/message/fp7ozcywxum3ar7n
|
|
called the other, they did the same thing.
|
|
- rename define DISABLE_SDL --> WITH_SDL (which was already used in some places)
- blenders interation preset was using orbit rather then turntable 3d view preference (different from factory defaults).
- tagged some unused rna args.
|
|
isn't used.
|
|
|
|
Memory Estimate is actually 31 characters length, str[31] is a null-terminator.
Return length of 31 for memory estimate property. Returning proper length
would lead to slowdown because of 2x iteration through vertices.
|
|
a) Enable the possibility to remove the "air bubble" around submerged collision object. This feature is enabled as standard for new files. The code was found in elbeem by nudelZ, coded and provided by Nils Thürey (thanks!)
b) Old baked files gets deleted if a new bake gets started (were overwritten before and resulted in weird old bake + new bake mixture) (idea by nudelZ)
|
|
The main purpose for this is to allow rendering motion blurred blender fluids in external renderers (eg. http://vimeo.com/21870635 ).
Python code snippet for interpreting this data here: http://www.pasteall.org/21577 . Cleaned up some ugly hacks in this area too
* Also added read-only access to scene.subframe to RNA - setting current frame and subframe should still go via scene.frame_set()
|
|
|
|
|
|
extending the string with strcat. use BLI_snprintf instead.
|
|
- move GS() define into DNA_ID.h
- add BLI_utildefines as an automatic include with makesrna generated files.
|
|
MAKE_ID, FILE_MAXDIR, moved the generic defines to BLI_utildefines.h.
no functional changes.
|
|
were supposed to
* It working before was actually a bug that got fixed by ton in r33663.
* Now the property subtype is correct and things work like they should.
|
|
only tags the ID and does the actual flush/update delayed, before the next
redraw. For objects the update was already delayed, just flushing wasn't
yet.
This should help performance in python and animation editors, by making
calls to RNA property update quicker. Still need to add calls in a few
places where this was previously avoided due to bad performance.
|
|
* Fluid baking (using the job system) didn't update the "lastgoodframe" anymore, so reversing the frames didn't work. Now the last valid frame is checked by going through all fluid bake files when "reverse frames" is selected.
* There was all kinds of fancy checks done in the fluid modifier for reading a different frame in different cases, but as the "lastgoodframe" was really not working I don't see the point of this whole code, so removed it for now. The new functionality is: if the fluid data for current frame exists use it, otherwise just return unmodified domain mesh without any fancy backup plans.
* There were also some errors on reading uncompleted files (scrubbing timeline while bake was running), so I made the fluid file reader just return null if the number of faces didn't correspond to to actually read data. Previously this just printed an error to the console.
|
|
Added an operator "Update Animation Data",
access from the search menu to update drivers and fcurves.
|
|
|
|
least its very unlikely).
|
|
|
|
- remove XML testing feature
- add 2 modules: bpyml - generic, bpyml_ui - blender spesific. nothing uses these now.
==bpyml_ui module==
defines BPyML_BaseUI and its draw() function which uses the bpyml member of the class instance self.draw_data & self.draw_header_data.
This way declarative ui is opt-in and easy to use by using BPyML_BaseUI as a mix-in class.
==bpyml module==
This module translates a python like XML representation into XML
or simple python blender/ui function calls.
sometag(arg=10) [
another(),
another(key="value")
]
# converts into ...
<sometag arg="10">
<another/>
<another key="value" />
</sometag>
|
|
|
|
mistakes in makesrna
|
|
This commit restores fluid sim baking functionality in 2.5, it's been on the todo for
a while, and was previously almost completely non-functional. The old
code was quite complicated and specific to the 2.4 animation system, so I've
pretty much rewritten most of it.
This includes:
* Animated variables work again - just key them in the UI. Non-animateable values
should be already set non-animateable in RNA, hopefully I got them all.
Available are: Domain Gravity / Domain Viscosity / Object loc/rot/scale /
Object initial velocity / Deforming meshes / Fluid control Attract strength /
Fluid control Attract radius / Fluid control Velocity strength /
Fluid control Velocity radius / Object Active status (checkbox next to fluid type)
The Domain time scale is still not yet implemented.
* Fluid sim now use global scene units data by default - when enabled, the
scene's global gravity value is used and when units are set (metric/imperial)
the simulation real world size is taken from the object's actual measurements.
* The baking process is now done in the background, using the nifty threaded
Jobs system. It's non-blocking and your domain object will show the simulated
fluid as it becomes available for that frame.
A nice extra thing for the future would be to improve the visualisation of the
object's state while baking, and also the jobs system/ui could do with some
touchups - currently it has to share a bit from the 'render' job, and appears as
'Render' in the header. Progress bars for jobs in the header would be great too.
|
|
|
|
|
|
|
|
|
|
|
|
* Property update functions no longer get context, instead they get only
Main and Scene. The RNA api was intended to be as context-less as
possible, since it doesn't really matter who is changing the property,
everything that uses the property should be updated.
* There's still one exception case that use it now, screen operations
still depend on context too much. It also revealed a few places using
context where they shouldn't.
* Ideally Scene shouldn't be passed, but much of Blender still depends on
it, should be dropped when we try to support multiple scene editing.
Change was planned for a while, but need this now to be able to call
update without a context pointer.
|
|
Previous method worked fine for Blender animation system, but this is more convenient for Python.
|
|
like the script in 2.4x
|
|
* #19583: Keying Sets list issues
Deleting a Keying Set (or a Keying Set Path) set the active index to 0, but that would mean that the first item would be selected but not visible.
* #19590: Keyframing properties of a modifier with more than one of it's type the property will highlight in all
- Modifiers now always have a unique name, so renaming a modifier should check that the name is unique. Most of the files changed in this commit were just to make sure that modifiers got unique names when they were created
- Modifiers path getter was wrapped a bit wrong (missing the "s around the name)
* Constraints Bugs
- Constraints renaming now also makes sure the names stay unique
- Fixed (or attempted to fix) compiler warnings about some enum declaration for distance constraint
|
|
keying of fluidsim settings properties.
Note: Although the properties can be animated with the RNA system, the values are not exported to the actual fluid sim yet, that can come later.
|
