Age | Commit message (Collapse) | Author |
|
The following properties were used by the Blender Game Engine and no longer
need to be around:
* Animated
* Tiles
* Clamp
* Mapping
|
|
|
|
First real 'usable' commit, will be needed by the 'virtual data-block'
asset feature (i.e. to be able to link a mere image file as if it was a
linked datablock, and generate automatically an override of it to make
it editable).
|
|
|
|
|
|
|
|
Previously auto refresh worked, but only if it was already enabled before
starting the viewport render.
|
|
|
|
Practically all access to enum data is read-only.
|
|
|
|
Previously it was returning short, which was really easy to (a) compare against
non-ID type value (b) forget to handle some specific value in switch statement.
Both issues happened in the nearest past, so it's time to tighten some nuts
here.
Most of the change related on silencing strict compiler warning now, but there
is also one tricky aspect: ID_NLA is not in the IDType enum. So there is still
cast to short to handle that switch. If someone has better ideas how to deal
with this please go ahead :)
|
|
BKE_depsgraph.h
This removes BKE_depsgraph.h and depsgraph.c
|
|
Resolves T51615
|
|
The set callback was missing couple of things:
- Mipmaps should be updated after pixels changes
- GPU texture is invalid after setting pixels
|
|
Definitions could shadow local vars.
|
|
Similar to addons -> add-ons, for reading it fits better to hyphenate.
|
|
Previously it would save packed file(s),
which would ignore the image.filepath,
making it impossible to set the destination.
Add image.packed_files[...].save() so you can save packed files if its needed.
|
|
Differential Revision: https://developer.blender.org/D1549
|
|
This was introduced in the fix for T44336 .
The code is now what it should have been in the first place at the time
of multiview commit.
ImageUser->passtype is being removed in favour of bringing
ImageUser->pass back.
Reviewers: sergey
Differential Revision: https://developer.blender.org/D1504
|
|
ImBuf types were getting stored as bitflags in a 32bit integer which had
already run out of space. Solved the problem by separating file type to
an ftype enum, and file specific options to foptions.
Reviewed by Campbell, thanks a lot!
|
|
This approach gets rid of iuser->pass for good.
Also, I'm commenting out the pass increase/decrease. This was broken
since multiview. I will fix it later (before 2.75), but I didn't want to
get this patch mangled with that fix.
Thanks Sergey Sharybin for the review and feedbacks.
Reviewers: sergey
Differential Revision: https://developer.blender.org/D1232
|
|
Official Documentation:
http://www.blender.org/manual/render/workflows/multiview.html
Implemented Features
====================
Builtin Stereo Camera
* Convergence Mode
* Interocular Distance
* Convergence Distance
* Pivot Mode
Viewport
* Cameras
* Plane
* Volume
Compositor
* View Switch Node
* Image Node Multi-View OpenEXR support
Sequencer
* Image/Movie Strips 'Use Multiview'
UV/Image Editor
* Option to see Multi-View images in Stereo-3D or its individual images
* Save/Open Multi-View (OpenEXR, Stereo3D, individual views) images
I/O
* Save/Open Multi-View (OpenEXR, Stereo3D, individual views) images
Scene Render Views
* Ability to have an arbitrary number of views in the scene
Missing Bits
============
First rule of Multi-View bug report: If something is not working as it should *when Views is off* this is a severe bug, do mention this in the report.
Second rule is, if something works *when Views is off* but doesn't (or crashes) when *Views is on*, this is a important bug. Do mention this in the report.
Everything else is likely small todos, and may wait until we are sure none of the above is happening.
Apart from that there are those known issues:
* Compositor Image Node poorly working for Multi-View OpenEXR
(this was working prefectly before the 'Use Multi-View' functionality)
* Selecting camera from Multi-View when looking from camera is problematic
* Animation Playback (ctrl+F11) doesn't support stereo formats
* Wrong filepath when trying to play back animated scene
* Viewport Rendering doesn't support Multi-View
* Overscan Rendering
* Fullscreen display modes need to warn the user
* Object copy should be aware of views suffix
Acknowledgments
===============
* Francesco Siddi for the help with the original feature specs and design
* Brecht Van Lommel for the original review of the code and design early on
* Blender Foundation for the Development Fund to support the project wrap up
Final patch reviewers:
* Antony Riakiotakis (psy-fi)
* Campbell Barton (ideasman42)
* Julian Eisel (Severin)
* Sergey Sharybin (nazgul)
* Thomas Dinged (dingto)
Code contributors of the original branch in github:
* Alexey Akishin
* Gabriel Caraballo
|
|
Currently, for animated textures we were allowing 16x16 tiles but we can reproduce 128 frames only.
Reviewers: moguri, sergey, campbellbarton
Reviewed By: sergey, campbellbarton
Differential Revision: https://developer.blender.org/D1164
|
|
This is actually issue with Image datablock, which had obscure Fields settings
but didn't allow to de-interlace the video.
Now added the option to de-interlace Image with Movie input type.
|
|
use bools for return values and some api naming consistency.
|
|
Change generated color property to gamma space to match the add new
image operator.
|
|
If a video was loaded (e.g. from python) but never 'ibuf-acquired', its Image->anim
prop would still be NULL, returning useless '1' value as frame duration!
|
|
Set your editor to tabs for all C/C++!
|
|
Basically the title tells it all, quite straightforward implementation.
The only thing is the image.render_slot which used to represent the active
render slot index is now moved to image.render_slots.active_index.
Reviewers: venomgfx, campbellbarton
Differential Revision: https://developer.blender.org/D821
|
|
The issue was caused by the fact that we never used to store the
generated image color in DNA, so image reload will loose this
information.
Now we store the color in DNA, making ti so re-loading the image
will preserve it's generated color.
It is now also possible to change generated image color using the
color swatch in image properties after the image was created.
|
|
|
|
|
|
This adds an ImageUser to such empties with all the typical settings.
Reviewed By: brecht, campbellbarton
Differential Revision: https://developer.blender.org/D108
|
|
|
|
Summary:
Behaves very much the same as cache for Movie Clip datablock:
- Image now have `MovieCache *cache` field which replaced
legacy `ListBase ibufs`.
This allows image datablock to easily keep of image
buffers which are owned by itself. This field isn't
saved to the file and getting restored on undo steps.
However, cache limit is global for movies, sequences
and image datablocks now. So overall cached image buffers
size will not go above cache limit size in user
preferences.
- Image buffers which are marked as BITMAPDIRTY will never
be freed from the cache.
- Added utility function to iterate over image buffers
saved in movie cache.
- Movie cache cleanup check callback now have ImBuf argument
which can be used in a condition of cleanup.
- Added some utility functions which replaces legacy ibufs
iterations with image cache iteration which happens from
inside a lock.
- Fixed `image_mem_size()` which was only counting one of
the buffers if both float and byte buffer present.
Additional notes:
- `BKE_image_get_first_ibuf()` is rather stupid, but direct
access to ibufs->first was also the same stupid idea.
Would consider avoid this function is another project.
- There are some places which doesn't look threadsafe, but
they already were not so much threadsafe anyway before.
So think not a big deal with solving this later.
Finally solves infinite memory usage by image sequences! :)
Reviewers: brecht, campbellbarton
Reviewed By: brecht
CC: sebastian_k
Differential Revision: http://developer.blender.org/D95
|
|
|
|
soft limits stay the same.
Reviewed By: brecht
Differential Revision: http://developer.blender.org/D33
|
|
|
|
for cycles image texture node.
|
|
|
|
|
|
Should go to 2.66a
Image Sequence texture now allows to animate "Offset" again with fcurves.
This was disabled for 2.65, it only works for fcurve key inserting (not
for drivers), but too many people have been using to animate character
textures already...
|
|
|
|
Issue was caused by FILE multilayer ImBuf sharing buffers with render
result, and SEQUENCE multilayer ImBufs duplicating buffers. Which is
nice by it's own. But, changing image source wouldn't remove any loaded
image buffers, meaning if you've got loaded FILE multilayers they'll
likely became invalid.
That behavior of handling multilayers on changing source was done as
a fix for #24976, which is now actually not needed (removing check
for multilayer doesn't change behavior at all).
Just to be sure added check to RNA, so signal wouldn't be fired if
source wasn't actually changed form a menu.
|
|
This adds support of movie textures for Cycles rendering.
Uses the same builtin images routines as packed/generated images,
but with some extra non-rna hookups from blender_session side.
Basically, it's not so clear how to give access to video frames
via C++ RNA -- it'll require exposing ImBuf to API, doing some
threading locks and so. Ended up adding two more functions which
are actually bad level call, but don't consider it's so much bad
-- we have few bad calls already, which are actually related.
Changed a bit how builtin images names are passing to image
manager. Now it's not just an ID datablock name, but also a frame
number concatenated via '@' character, which makes itpossible to
easily know frame number to be used for movie images, without
adding extra descriptors to image manager.
Decoding of builtin name is a bit slower now, but it should be
still nothing in comparison with rendering complexity.
Also exposed image user's frame_current to python API, which
is needed to get absolute frame number of movie from node's
image user.
P.S. Generated/packed images are also using bad level call but
only does it to make things more clear here. Either all images
are using C++ RNA here or no images does. That's the most clear
for now.
|
|
fix in UI messages :p )
|
|
This commit adds support of packed and generated images
for Cycles when using SVM backend. Movies are still not
supported. This changes also doesn't touch OSL which is
much less trivial to adopt for any images which are not
saved to disk.
Implementation details:
- When adding images to Image Manager is now possible
to mark image as builtin. Builtin images will bypass
OIIO loader and will use special loading callbacks.
- Callbacks are set by Blender Session and they're
using C++ RNA interface to obtain needed data (pixels,
dimensions, is_float flag).
- Image Manager assumes file path is used as reference
to a builtin images, but in fact currently image
datablock name is used for reference. This makes it
easy to find an image in BlendData database.
- Added some extra properties to Image RNA:
* channels, which denotes actual number of channels
in ImBuf. This is needed to treat image's pixels
correct (before it wasn't possible because API
used internal number of channels for pixels which
is in fact doesn't correlate with image depth)
* is_float, which is truth if image is stored in
float buffer of ImBuf.
- Implemented string lookup for C++ RNA collections
for cases there's no manual lookup function.
OSL is not supported because it used own image loading
and filtering routines and there's seems to be no API
to feed pre-loaded pixels directly to the library.
Think we'll either need to add some API to support
such kind of feeding or consider OSL does not have
support of packed images at all.
Movies are not supported at this moment because of lack
of RNA API to load specified frame. It's not difficult
to solve, just need to consider what to best here:
* Either write some general python interface for ImBuf
and use it via C++ API, or
* Write a PY API function which will return pixels for
given frame, or
* Use bad-level BKE_* call
Anyway, small steps, further improvements later.
Reviewed by Brecht, thanks!
|
|
Either forgot to merge some local changes into trunk or merge happened wrong..
|
|
This assumptions are now made:
- Internally float buffers are always linear alpha-premul colors
- Readers should worry about delivering float buffers with that
assumptions.
- There's an input image setting to say whether it's stored with
straight/premul alpha on the disk.
- Byte buffers are now assumed have straight alpha, readers should
deliver straight alpha.
Some implementation details:
- Removed scene's color unpremultiply setting, which was very
much confusing and was wrong for default settings.
Now all renderers assumes to deliver premultiplied alpha.
- IMB_buffer_byte_from_float will now linearize alpha when
converting from buffer.
- Sequencer's effects were changed to assume bytes have got
straight alpha. Most of effects will work with bytes still,
however for glow it was more tricky to avoid data loss, so
there's a commented out glow implementation which converts
byte buffer to floats first, operates on floats and returns
bytes back. It's slower and not sure if it should actually
be used -- who're using glow on alpha anyway?
- Sequencer modifiers should also be working nice with straight
bytes now.
- GLSL preview will predivide float textures to make nice shading,
shading with byte textures worked nice (GLSL was assuming straight
alpha).
- Blender Internal will set alpha=1 to the whole sky. The same
happens in Cycles and there's no way to avoid this -- sky is
neither straight nor premul and doesn't fit color pipeline well.
- Straight alpha mode for render result was also eliminated.
- Conversion to correct alpha need to be done before linearizing
float buffer.
- TIFF will now load and save files with proper alpha mode setting
in file meta data header.
- Remove Use Alpha from texture mapping and replaced with image
datablock setting.
Behaves much more predictable and clear from code point of view
and solves possible regressions when non-premultiplied images were
used as textures with ignoring alpha channel.
|
|
This two things were using the same DNA and RNA structures because
internally they're completely the same. However, that was confusing
from the interface point of view.
Now it should be much more clear what's going on there.
|