| Age | Commit message (Collapse) | Author |
|---|
|
|
|
for cycles image texture node.
|
|
|
|
|
|
Should go to 2.66a
Image Sequence texture now allows to animate "Offset" again with fcurves.
This was disabled for 2.65, it only works for fcurve key inserting (not
for drivers), but too many people have been using to animate character
textures already...
|
|
|
|
Issue was caused by FILE multilayer ImBuf sharing buffers with render
result, and SEQUENCE multilayer ImBufs duplicating buffers. Which is
nice by it's own. But, changing image source wouldn't remove any loaded
image buffers, meaning if you've got loaded FILE multilayers they'll
likely became invalid.
That behavior of handling multilayers on changing source was done as
a fix for #24976, which is now actually not needed (removing check
for multilayer doesn't change behavior at all).
Just to be sure added check to RNA, so signal wouldn't be fired if
source wasn't actually changed form a menu.
|
|
This adds support of movie textures for Cycles rendering.
Uses the same builtin images routines as packed/generated images,
but with some extra non-rna hookups from blender_session side.
Basically, it's not so clear how to give access to video frames
via C++ RNA -- it'll require exposing ImBuf to API, doing some
threading locks and so. Ended up adding two more functions which
are actually bad level call, but don't consider it's so much bad
-- we have few bad calls already, which are actually related.
Changed a bit how builtin images names are passing to image
manager. Now it's not just an ID datablock name, but also a frame
number concatenated via '@' character, which makes itpossible to
easily know frame number to be used for movie images, without
adding extra descriptors to image manager.
Decoding of builtin name is a bit slower now, but it should be
still nothing in comparison with rendering complexity.
Also exposed image user's frame_current to python API, which
is needed to get absolute frame number of movie from node's
image user.
P.S. Generated/packed images are also using bad level call but
only does it to make things more clear here. Either all images
are using C++ RNA here or no images does. That's the most clear
for now.
|
|
fix in UI messages :p )
|
|
This commit adds support of packed and generated images
for Cycles when using SVM backend. Movies are still not
supported. This changes also doesn't touch OSL which is
much less trivial to adopt for any images which are not
saved to disk.
Implementation details:
- When adding images to Image Manager is now possible
to mark image as builtin. Builtin images will bypass
OIIO loader and will use special loading callbacks.
- Callbacks are set by Blender Session and they're
using C++ RNA interface to obtain needed data (pixels,
dimensions, is_float flag).
- Image Manager assumes file path is used as reference
to a builtin images, but in fact currently image
datablock name is used for reference. This makes it
easy to find an image in BlendData database.
- Added some extra properties to Image RNA:
* channels, which denotes actual number of channels
in ImBuf. This is needed to treat image's pixels
correct (before it wasn't possible because API
used internal number of channels for pixels which
is in fact doesn't correlate with image depth)
* is_float, which is truth if image is stored in
float buffer of ImBuf.
- Implemented string lookup for C++ RNA collections
for cases there's no manual lookup function.
OSL is not supported because it used own image loading
and filtering routines and there's seems to be no API
to feed pre-loaded pixels directly to the library.
Think we'll either need to add some API to support
such kind of feeding or consider OSL does not have
support of packed images at all.
Movies are not supported at this moment because of lack
of RNA API to load specified frame. It's not difficult
to solve, just need to consider what to best here:
* Either write some general python interface for ImBuf
and use it via C++ API, or
* Write a PY API function which will return pixels for
given frame, or
* Use bad-level BKE_* call
Anyway, small steps, further improvements later.
Reviewed by Brecht, thanks!
|
|
Either forgot to merge some local changes into trunk or merge happened wrong..
|
|
This assumptions are now made:
- Internally float buffers are always linear alpha-premul colors
- Readers should worry about delivering float buffers with that
assumptions.
- There's an input image setting to say whether it's stored with
straight/premul alpha on the disk.
- Byte buffers are now assumed have straight alpha, readers should
deliver straight alpha.
Some implementation details:
- Removed scene's color unpremultiply setting, which was very
much confusing and was wrong for default settings.
Now all renderers assumes to deliver premultiplied alpha.
- IMB_buffer_byte_from_float will now linearize alpha when
converting from buffer.
- Sequencer's effects were changed to assume bytes have got
straight alpha. Most of effects will work with bytes still,
however for glow it was more tricky to avoid data loss, so
there's a commented out glow implementation which converts
byte buffer to floats first, operates on floats and returns
bytes back. It's slower and not sure if it should actually
be used -- who're using glow on alpha anyway?
- Sequencer modifiers should also be working nice with straight
bytes now.
- GLSL preview will predivide float textures to make nice shading,
shading with byte textures worked nice (GLSL was assuming straight
alpha).
- Blender Internal will set alpha=1 to the whole sky. The same
happens in Cycles and there's no way to avoid this -- sky is
neither straight nor premul and doesn't fit color pipeline well.
- Straight alpha mode for render result was also eliminated.
- Conversion to correct alpha need to be done before linearizing
float buffer.
- TIFF will now load and save files with proper alpha mode setting
in file meta data header.
- Remove Use Alpha from texture mapping and replaced with image
datablock setting.
Behaves much more predictable and clear from code point of view
and solves possible regressions when non-premultiplied images were
used as textures with ignoring alpha channel.
|
|
This two things were using the same DNA and RNA structures because
internally they're completely the same. However, that was confusing
from the interface point of view.
Now it should be much more clear what's going on there.
|
|
This commit makes BKE_image_acquire_ibuf referencing result, which means once
some area requested for image buffer, it'll be guaranteed this buffer wouldn't
be freed by image signal.
To de-reference buffer BKE_image_release_ibuf should now always be used.
To make referencing working correct we can not rely on result of
image_get_ibuf_threadsafe called outside from thread lock. This is so because
we need to guarantee getting image buffer from list of loaded buffers and it's
referencing happens atomic. Without lock here it is possible that between call
of image_get_ibuf_threadsafe and referencing the buffer IMA_SIGNAL_FREE would
be called. Image signal handling too is blocking now to prevent such a
situation.
Threads are locking by spinlock, which are faster than mutexes. There were some
slowdown reports in the past about render slowdown when using OSX on Xeon CPU.
It shouldn't happen with spin locks, but more tests on different hardware would
be really welcome. So far can not see speed regressions on own computers.
This commit also removes BKE_image_get_ibuf, because it was not so intuitive
when get_ibuf and acquire_ibuf should be used.
Thanks to Ton and Brecht for discussion/review :)
|
|
Added "not animatable" properties to Image animation options; that's not supported.
|
|
|
|
|
|
|
|
|
|
|
|
Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
|
|
|
|
length in frames (or 1 for still images).
|
|
|
|
also use ..._find_name(..., name) rather then ..._find_named(..., name) --- both were used.
|
|
|
|
|
|
|
|
else if's
|
|
Note about long lines: I did not touch to two pieces of code (because I don’t see any way to keep a nicely formated, compact code, with shorter lines):
* The node types definitions into rna_nodetree_types.h
* The vgroup name functions into rna_particle.c
|
|
Addresses:
* C++ comments.
* Spaces after if/for/while/switch statements.
* Spaces around assignment operators.
|
|
All suggested changes looked good to me, thx to Michael Färber for this list of changes!
|
|
|
|
settings.
For premultiplied alpha images, this makes any color space conversion for the image
or render output work on color without alpha multiplied in.
This is typically useful to avoid fringing when the image was or will be composited
over a light background. If the image will be composited over a black background on
the other hand, leaving this option off will give correct results.
In an ideal world, there should never be any color space conversion on images with
alpha, since it's undefined what to do then, but in practice it's useful to have
this option.
Patch by Troy Sobotka, with changes by me.
|
|
french...
|
|
avoid confusion with ImageFormatData.depth
|
|
http://markmail.org/message/fp7ozcywxum3ar7n
|
|
|
|
Generated images would not be re-generated with a float buffer on load, even when selected on creation.
Now save the float buffer setting as a generated image flag.
This means you can enable before baking to enable baking to a float buffer.
|
|
|
|
needed for dynamic python enums.
|
|
only RNA access currently 'image.resolution'.
|
|
More clear naming for image "source" type.
"Single Image" and "Image Sequence" and "Movie File".
Thanks @hjalti for poking!
|
|
Marama.
|
|
|
|
It's not the most efficient solution, but this can be optimized later. It's
best to copy out all the pixels at once into a list, rather than accessing
them one by one.
|
|
also use <> for system includes
|
|
|
|
|
|
- move GS() define into DNA_ID.h
- add BLI_utildefines as an automatic include with makesrna generated files.
|
