| Age | Commit message (Collapse) | Author |
|---|
|
There are cases where there is no way to ensure we do have/know about an
active scene. Further more, this should not be required to perform
'real' updates on data, only to perform additional special handling in
current scene (mostly related to editing tools, UI, etc.).
This pointer is actually almost never used in practice, and half of its current
usages are fairly close to abuse of the system (like calls to
`ED_gpencil_tag_scene_gpencil` or `BKE_rigidbody_cache_reset`).
This commit ensures that the few places using this 'active scene' pointer are
safely handling the `NULL` case, and clearly document the fact that a
NULL scene pointer is valid.
|
|
Improve texture painting/uv editing performance when limited scale is active.
Cause of the slow down is that the image editor draws the image in maximum resolution,
but the 3d viewport uses the limited scale. The variation reuses the same GPU texture
and needed to be uploaded/scaled twice to the GPU.
This patch will adds texture slots that can hold the scaled down and the maximum
resolution image. This would allow better cache hits and reuse of existing caches.
Maximum resolution textures are reused for limited scale when they fit to reduce memory
and CPU footprint.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D12388
|
|
Removes the artificial requirement that UDIM tile sets start at 1001.
Blender was already capable of handling sparse tile sets (non-contiguous
tiles) so the restriction around starting at 1001 was unnecessary in
general.
This required fixing a few UDIM-related python bugs around manually
updating the `tile_number` field on images as well. See the differential
for details. No script changes are necessary but they will now work,
correctly, in many more cases.
Differential Revision: https://developer.blender.org/D11859
|
|
This patch fixes many minor spelling mistakes, all in comments or
console output. Mostly contractions like can't, won't, don't, its/it's,
etc.
Differential Revision: https://developer.blender.org/D11663
Reviewed by Harley Acheson
|
|
|
|
|
|
Approximately 138 changes in the spelling of compound words
and proper names like "Light Probe", "Shrink/Fatten", "Face Map".
In many cases, hyphens were used where they aren't correct, like
"re-fit". Other common changes include:
- "Datablock" -> "data-block"
- "Floating point" -> "floating-point"
- "Ngons" -> "n-gons"
These changes help give the language used in the interface
a consistent, more professional feel.
Differential Revision: https://developer.blender.org/D9923
|
|
This patch introduces a partial update of GPUTexture. When rendering
a large image the GPUTexture could have been scaled. The old implementation
would rescale the image on CPU and create a new GPUTexture. This
resulted in flooding the PCI bus.
The new solution would only scale and upload the parts of the GPUTexture
that has been changed. It does this by keeping track of areas of 256x256
pixels. When something changes the tiles that cover that changes will be
rescaled and uploaded the next time the GPUTexture is requested.
Test situation: Default Cube, 4 samples, 19200x10800 tile size 512.
Blender 2.83.9: 4m27s.
Blender 2.91: 20+m (regression)
This patch: 1m01s.
There is still room for more optimizations:
* Reduce the time that an image is locked.
** Use task scheduling to update the tiles of an image.
** Generic optimization of the ImBuf scale method.
Maniphest Tasks: T82591
Differential Revision: https://developer.blender.org/D9591
|
|
Correct usage of compound modifiers like '32-bit'.
Differential Revision: https://developer.blender.org/D9769
Reviewed by Julian Eisel
|
|
Image format code checked the file type against an enum except for
zero which is used when the format can't be detected.
Also add doc-strings to some of the image file type callbacks.
|
|
|
|
|
|
This is in order to disolve GPU_draw.h into more meaningful code blocks.
All the Image related function are in `image_gpu.c`.
All the MovieClip related function are in `movieclip.c`.
The IMB module now has a connection with GPU. This is not strickly
necessary and the code could be move to `image_gpu.c` if needed.
The Image garbage collection is also ported to `image_gpu.c`.
|
|
|
|
Using 'name' for the full path of a file reads badly,
especially when id.name is used in related code.
|
|
|
|
Differential Revision: https://developer.blender.org/D7171
|
|
|
|
|
|
Part of the fix was to get gputexture to use an array to accomodate each
eye. This takes care of viewports showing individual Left or Right
views.
For the combined view the fix was in overlay_image.c:camera_background_images_stereo_setup.
Note 1: Referece images are still not supporting stereo.
Note 2: For painting, and getting image bindcode I'm hardcording a
single-view experience.
Note 3: Without D6922 stereo is too broken to even test this patch.
With D6922 + this patch the fullscreen modes work (anaglyph/interlace
not yet).
Differential Revision: D7143
|
|
|
|
This adds the `Half Float Precision` option in the image property panel.
This option is only available on float textures and is enabled by default.
Adding a flag inside the imbuf (IB_halffloat) on load is done for EXR and PSD formats that can store half floating point (16bits/channels).
The option is then not displayed in this case and forced.
Related task T73086
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6891
|
|
Based on @fclem's suggestion in D6421, this commit implements support for
storing all tiles of a UDIM texture in a single 2D array texture on the GPU.
Previously, Eevee was binding one OpenGL texture per tile, quickly running
into hardware limits with nontrivial UDIM texture sets.
Workbench meanwhile had no UDIM support at all, as reusing the per-tile
approach would require splitting the mesh by tile as well as texture.
With this commit, both Workbench as well as Eevee now support huge numbers
of tiles, with the eventual limits being GPU memory and ultimately
GL_MAX_ARRAY_TEXTURE_LAYERS, which tends to be in the 1000s on modern GPUs.
Initially my plan was to have one array texture per unique size, but managing
the different textures and keeping everything consistent ended up being way
too complex.
Therefore, we now use a simpler version that allocates a texture that
is large enough to fit the largest tile and then packs all tiles into as many
layers as necessary.
As a result, each UDIM texture only binds two textures (one for the actual
images, one for metadata) regardless of how many tiles are used.
Note that this rolls back per-tile GPUTextures, meaning that we again have
per-Image GPUTextures like we did before the original UDIM commit,
but now with four instead of two types.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6456
|
|
|
|
This patch contains the work that I did during my week at the Code Quest - adding support for tiled images to Blender.
With this patch, images now contain a list of tiles. By default, this just contains one tile, but if the source type is set to Tiled, the user can add additional tiles. When acquiring an ImBuf, the tile to be loaded is specified in the ImageUser.
Therefore, code that is not yet aware of tiles will just access the default tile as usual.
The filenames of the additional tiles are derived from the original filename according to the UDIM naming scheme - the filename contains an index that is calculated as (1001 + 10*<y coordinate of the tile> + <x coordinate of the tile>), where the x coordinate never goes above 9.
Internally, the various tiles are stored in a cache just like sequences. When acquired for the first time, the code will try to load the corresponding file from disk. Alternatively, a new operator can be used to initialize the tile similar to the New Image operator.
The following features are supported so far:
- Automatic detection and loading of all tiles when opening the first tile (1001)
- Saving all tiles
- Adding and removing tiles
- Filling tiles with generated images
- Drawing all tiles in the Image Editor
- Viewing a tiled grid even if no image is selected
- Rendering tiled images in Eevee
- Rendering tiled images in Cycles (in SVM mode)
- Automatically skipping loading of unused tiles in Cycles
- 2D texture painting (also across tiles)
- 3D texture painting (also across tiles, only limitation: individual faces can not cross tile borders)
- Assigning custom labels to individual tiles (drawn in the Image Editor instead of the ID)
- Different resolutions between tiles
There still are some missing features that will be added later (see T72390):
- Workbench engine support
- Packing/Unpacking support
- Baking support
- Cycles OSL support
- many other Blender features that rely on images
Thanks to Brecht for the review and to all who tested the intermediate versions!
Differential Revision: https://developer.blender.org/D3509
|
|
The old layout of `PointerRNA` was confusing for historic reasons:
```
typedef struct PointerRNA {
struct {
void *data;
} id;
struct StructRNA *type;
void *data;
} PointerRNA;
```
This patch updates it to:
```
typedef struct PointerRNA {
struct ID *owner_id;
struct StructRNA *type;
void *data;
} PointerRNA;
```
Throughout the code base `id.data` was replaced with `owner_id`.
Furthermore, many explicit pointer type casts were added which
were implicit before. Some type casts to `ID *` were removed.
Reviewers: brecht, campbellbarton
Differential Revision: https://developer.blender.org/D5558
|
|
T68035 by @luzpaz
|
|
|
|
Better to make internal code naming match official/UI naming to some
extent, this will reduce confusion in the future.
This is 'breaking' scripts and files that would use that feature, but
since it is not yet officially supported nor exposed in 2.80, as far
as that release is concerned, it is effectively
a 'no functional changes' commit.
|
|
|
|
|
|
thx @Gvgeo for adding the python/RNA case as well.
Reviewers: brecht
Maniphest Tasks: T64867
Differential Revision: https://developer.blender.org/D4902
|
|
Most code uses ReportList argument last (or at least not first)
when an optional report list can be passed in.
|
|
This also replaces the Use Alpha setting. We now have these alpha modes:
* Straight: store RGB and alpha channels separately with alpha acting as a
mask, also known as unassociated alpha.
* Premultiplied: transparent RGB pixels are multiplied by the alpha channel.
The natural format for renders.
* Channel Packed: different images are packed in the RGB and alpha channels,
and they should not influence each other. Channel packing is commonly used
by game engines to save memory.
* None: ignore alpha channel from the file and make image fully opaque.
Cycles OSL does not correctly support Channel Packed and None yet, we are
missing fine control over the OpenImageIO texture cache to do that.
Fixes T53672
|
|
The goal is to prevent assignment of temporary or evaluated meshes
to objects from the main database.
Majority of the change is actually related on passing reports around.
On a positive side there are more error prints which can become more
visible to scripters.
There are still possible further improvements in the related areas.
For example, disable user counting for evaluated ID datablocks when
assignment happens. But can also happen later on as a separate
improvement.
Reviewers: brecht, campbellbarton, mont29
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D4884
|
|
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
|
|
Since animation is now handled by the dependency graph.
|
|
|
|
The dependency graph now handles updating image users to point to the current
frame, and tags images to be refreshed on the GPU. The image editor user is
still updated outside of the dependency graph.
We still do not support multiple image users using a different current frame
in the same image, same as 2.7. This may require adding a GPU image texture
cache to keep memory usage under control. Things like rendering an animation
while the viewport stays fixed at the current frame works though.
|
|
While \file doesn't need an argument, it can't have another doxy
command after it.
|
|
Move \ingroup onto same line to be more compact and
make it clear the file is in the group.
|
|
Needed for clan-format not to wrap onto one line.
|
|
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
|
|
|
|
Use rna naming conventions for unit-settings callbacks.
|
|
There were at least three copies of those:
- OB_RECALC* family of flags, which are rudiment of an old
dependency graph system.
- PSYS_RECALC* which were used by old dependency graph system
as a separate set since the graph itself did not handle
particle systems.
- DEG_TAG_* which was used to tag IDs.
Now there is a single set, which defines what can be tagged
and queried for an update. It also has some aggregate flags
to make queries simpler.
Lets once and for all solve the madness of those flags, stick
to a single set, which will not overlap with anything or require
any extra conversion.
Technically, shouldn't be measurable user difference, but some
of the agregate flags for few dependency graph components did
change.
Fixes T58632: Particle don't update rotation settings
|
|
Maybe there is a more correct way, but this works for now.
|
|
|
