| Age | Commit message (Collapse) | Author |
|---|
|
The implementation is pretty straightforward.
In Cycles, sampling the shapes is currently done w.r.t. area instead of solid angle.
There is a paper on solid angle sampling for disks [1], but the described algorithm is based on
simply sampling the enclosing square and rejecting samples outside of the disk, which is not exactly
great for Cycles' RNG (we'd need to setup a LCG for the repeated sampling) and for GPU divergence.
Even worse, the algorithm is only defined for disks. For ellipses, the basic idea still works, but a
way to analytically calculate the solid angle is required. This is technically possible [2], but the
calculation is extremely complex and still requires a lookup table for the Heuman Lambda function.
Therefore, I've decided to not implement that for now, we could still look into it later on.
In Eevee, the code uses the existing ltc_evaluate_disk to implement the lighting calculations.
[1]: "Solid Angle Sampling of Disk and Cylinder Lights"
[2]: "Analytical solution for the solid angle subtended at any point by an ellipse via a point source radiation vector potential"
Reviewers: sergey, brecht, fclem
Differential Revision: https://developer.blender.org/D3171
|
|
It's usefull in some scenario to tweak the specular intensity of a light
without modifying the diffuse contribution.
Cycles allows it via lamps material which we currently not support in Eevee.
This is a good workaround for now.
|
|
Reported on T54788: Actually this was what BI was doing as well.
But anyways fixed for good now.
That includes a subversion bump.
|
|
Brecht authored this commit, but he gave me the honours to actually
do it. Here it goes; Blender Internal. Bye bye, you did great!
* Point density, voxel data, ocean, environment map textures were removed,
as these only worked within BI rendering. Note that the ocean modifier
and the Cycles point density shader node continue to work.
* Dynamic paint using material shading was removed, as this only worked
with BI. If we ever wanted to support this again probably it should go
through the baking API.
* GPU shader export through the Python API was removed. This only worked
for the old BI GLSL shaders, which no longer exists. Doing something
similar for Eevee would be significantly more complicated because it
uses a lot of multiplass rendering and logic outside the shader, it's
probably impractical.
* Collada material import / export code is mostly gone, as it only worked
for BI materials. We need to add Cycles / Eevee material support at some
point.
* The mesh noise operator was removed since it only worked with BI
material texture slots. A displacement modifier can be used instead.
* The delete texture paint slot operator was removed since it only worked
for BI material texture slots. Could be added back with node support.
* Not all legacy viewport features are supported in the new viewport, but
their code was removed. If we need to bring anything back we can look at
older git revisions.
* There is some legacy viewport code that I could not remove yet, and some
that I probably missed.
* Shader node execution code was left mostly intact, even though it is not
used anywhere now. We may eventually use this to replace the texture
nodes with Cycles / Eevee shader nodes.
* The Cycles Bake panel now includes settings for baking multires normal
and displacement maps. The underlying code needs to be merged properly,
and we plan to add back support for multires AO baking and add support
to Cycles baking for features like vertex color, displacement, and other
missing baking features.
* This commit removes DNA and the Python API for BI material, lamp, world
and scene settings. This breaks a lot of addons.
* There is more DNA that can be removed or renamed, where Cycles or Eevee
are reusing some old BI properties but the names are not really correct
anymore.
* Texture slots for materials, lamps and world were removed. They remain
for brushes, particles and freestyle linestyles.
* 'BLENDER_RENDER' remains in the COMPAT_ENGINES of UI panels. Cycles and
other renderers use this to find all panels to show, minus a few panels
that they have their own replacement for.
|
|
|
|
Practically all access to enum data is read-only.
|
|
This add the possibility to add screen space raytraced shadows to fix light leaking cause by shadows maps.
Theses inherit of the same artifacts as other screenspace methods.
|
|
|
|
|
|
BKE_depsgraph.h
This removes BKE_depsgraph.h and depsgraph.c
|
|
Added exponent parameter to tweak light bleeding.
Added depth bias to the shadow test.
Added better blurring using 32 samples.
|
|
|
|
|
|
|
|
|
|
This patch adds a new `falloff_type` ('Inverse Coefficients') for Lamps in
Blender-Internal and GLSL.
The current falloff modes use a formula like this inverse-square one:
`I = E × (D^2 / (D^2 + Q × r^2))`
While such a formula is simple for 3D-artists to use, it's algebraically
cumbersome to work with. Game-designers authoring their own shaders
could benefit much more by having direct control of falloff-coefficients:
`I = E × (1.0 / (coefC + coefL × r + coefQ × r^2))`
In this mode, the `distance` parameter is unused (except for 'Sphere'
mode); instead relying on the designer to mathematically-model the
falloff-behavior.
The UI has been patched like so:
{F153843}
Reviewers: brecht, psy-fi
Reviewed By: psy-fi
Subscribers: brita_, antidote, campbellbarton, psy-fi
Differential Revision: https://developer.blender.org/D1194
|
|
Definitions could shadow local vars.
|
|
Similar to addons -> add-ons, for reading it fits better to hyphenate.
|
|
- Add blentranslation `BLT_*` module.
- moved & split `BLF_translation.h` into (`BLT_translation.h`, `BLT_lang.h`).
- moved `BLF_*_unifont` functions from `blf_translation.c` to new source file `blf_font_i18n.c`.
|
|
|
|
New Check option "Show Shadow Box" in shadow panel of sun lamp to get
feedback about which objects project shadows.
Minor tweaks by Campbell Barton and Jorge Bernal
Reviewers: moguri, sybren, kupoman, dfelinto, lordloki, campbellbarton
Reviewed By: lordloki, campbellbarton
Subscribers: sergey, lordloki
Projects: #game_engine
Differential Revision: https://developer.blender.org/D1149
|
|
|
|
Makes use_shadow usage consistent across supported lamp types (Spot and
Sun)
Differential D1148
Reviewers: Moguri, Brecht
|
|
|
|
|
|
particle texture slot
|
|
This patch changes most of the reamining degrees usage in internal code into radians.
I let a few which I know off asside, for reasons explained below - and I'm not sure to have found out all of them.
WARNING: this introduces forward incompatibility, which means files saved from this version won't open 100% correctly
in previous versions (a few angle properties would use radians values as degrees...).
Details:
- Data:
-- Lamp.spotsize: Game engine exposed this setting in degrees, to not break the API here I kept it as such
(using getter/setter functions), still using radians internally.
-- Mesh.smoothresh: Didn't touch to this one, as we will hopefully replace it completely by loop normals currently in dev.
- Modifiers:
-- EdgeSplitModifierData.split_angle, BevelModifierData.bevel_angle: Done.
- Postprocessing:
-- WipeVars.angle (sequencer's effect), NodeBokehImage.angle, NodeBoxMask.rotation, NodeEllipseMask.rotation: Done.
- BGE:
-- bConstraintActuator: Orientation type done (the minloc[0] & maxloc[0] cases). Did not touch to 'limit location' type,
it can also limit rotation, but it exposes through RNA the same limit_min/limit_max, which hence
can be either distance or angle values, depending on the mode. Will leave this to BGE team.
-- bSoundActuator.cone_outer_angle_3d, bSoundActuator.cone_inner_angle_3d: Done (note I kept degrees in BGE itself,
as it seems this is the expected value here...).
-- bRadarSensor.angle: Done.
Reviewers: brecht, campbellbarton, sergey, gaiaclary, dfelinto, moguri, jbakker, lukastoenne, howardt
Reviewed By: brecht, campbellbarton, sergey, gaiaclary, moguri, jbakker, lukastoenne, howardt
Thanks to all!
Differential Revision: http://developer.blender.org/D59
|
|
also set_source_files_properties() wasn't working for rna_*_gen.c files,
set dna.c and generated data files with generated property too.
|
|
|
|
recent
changes to avoid unnecessary redraws.
|
|
|
|
old issue, the formulas here were never quite right, should all work ok now
with byte and float images.
Some differences:
* Colors with zero alpha from the background will never have an influence, so
you don't get alpha fringes when painting over such areas. This does give
hard edges when looking at the RGB channels alone, but there's no way to
avoid that and fringes at the same time, same behavior as other painting apps.
* Add/Subtract/Multiply/Lighten/Darken now leave the alpha channel unchanged
and work only the RGB channels, again same behavior as many other apps.
* Erase/Add alpha now compensates for premultiplied float images to keep the
straight RGB colors the same.
Next: fix projection painting.
|
|
PyNodes opens up the node system in Blender to scripters and adds a number of UI-level improvements.
=== Dynamic node type registration ===
Node types can now be added at runtime, using the RNA registration mechanism from python. This enables addons such as render engines to create a complete user interface with nodes.
Examples of how such nodes can be defined can be found in my personal wiki docs atm [1] and as a script template in release/scripts/templates_py/custom_nodes.py [2].
=== Node group improvements ===
Each node editor now has a tree history of edited node groups, which allows opening and editing nested node groups. The node editor also supports pinning now, so that different spaces can be used to edit different node groups simultaneously. For more ramblings and rationale see (really old) blog post on code.blender.org [3].
The interface of node groups has been overhauled. Sockets of a node group are no longer displayed in columns on either side, but instead special input/output nodes are used to mirror group sockets inside a node tree. This solves the problem of long node lines in groups and allows more adaptable node layout. Internal sockets can be exposed from a group by either connecting to the extension sockets in input/output nodes (shown as empty circle) or by adding sockets from the node property bar in the "Interface" panel. Further details such as the socket name can also be changed there.
[1] http://wiki.blender.org/index.php/User:Phonybone/Python_Nodes
[2] http://projects.blender.org/scm/viewvc.php/trunk/blender/release/scripts/templates_py/custom_nodes.py?view=markup&root=bf-blender
[3] http://code.blender.org/index.php/2012/01/improving-node-group-interface-editing/
|
|
|
|
|
|
128 (down from 512).
|
|
|
|
|
|
|
|
|
|
|
|
working in blender render rather than blender game mode. Tweaked the flags a
bit to make it compatible more, but for full configuration you need to be in
blender game mode still.
|
|
|
|
* Shadow color now usable in the BGE
* Simplified the shadow panel while "Blender Game" renderer is active
* Added variance shadow maps for the BGE
* Buffered shadows on sun lamps in the BGE (orthographic)
* Light textures in the BGE
|
|
|
|
Note about long lines: I did not touch to two pieces of code (because I don’t see any way to keep a nicely formated, compact code, with shorter lines):
* The node types definitions into rna_nodetree_types.h
* The vgroup name functions into rna_particle.c
|
|
Addresses:
* C++ comments.
* Spaces after if/for/while/switch statements.
* Spaces around assignment operators.
|
|
while translating in french).
|
|
french...
|
|
|
