Age | Commit message (Collapse) | Author |
|
- Remove "take ownership" argument which was confusing and always true
- The argument made ownership very confusing
- Better to avoid boolean arguments that switch a function's purpose
- Remove "mask" argument which was basically wrong and not used properly
- "EVERYTHING" was used because developers are wary of removing data
- Instead use `CD_MASK_MESH` for its purpose of original mesh data
- Remove use of shallow copied temporary mesh, which is unnecessary now
- Split shape key processing into separate functions and use C++ types
- Copy fields explicitly rather than using memcpy for the whole struct
- Use higher level functions and avoid redundant code
- The whole idea is pretty simple and can be built from standard logic
- Adjust `CustomData` logic to be consistent with "assign" expectations
- Clear the layer data from the source, and moves the anonymous ID
Differential Revision: https://developer.blender.org/D15857
|
|
Follows existing naming for the most part, also use "num" as a suffix
in some instances (following our naming conventions).
|
|
Use `verts` instead of `vertices` and `polys` instead of `polygons`
in the API added in 05952aa94d33eeb50. This aligns better with
existing naming where the shorter names are much more common.
|
|
For copy-on-write, we want to share attribute arrays between meshes
where possible. Mutable pointers like `Mesh.mvert` make that difficult
by making ownership vague. They also make code more complex by adding
redundancy.
The simplest solution is just removing them and retrieving layers from
`CustomData` as needed. Similar changes have already been applied to
curves and point clouds (e9f82d3dc7ee, 410a6efb747f). Removing use of
the pointers generally makes code more obvious and more reusable.
Mesh data is now accessed with a C++ API (`Mesh::edges()` or
`Mesh::edges_for_write()`), and a C API (`BKE_mesh_edges(mesh)`).
The CoW changes this commit makes possible are described in T95845
and T95842, and started in D14139 and D14140. The change also simplifies
the ongoing mesh struct-of-array refactors from T95965.
**RNA/Python Access Performance**
Theoretically, accessing mesh elements with the RNA API may become
slower, since the layer needs to be found on every random access.
However, overhead is already high enough that this doesn't make a
noticible differenc, and performance is actually improved in some
cases. Random access can be up to 10% faster, but other situations
might be a bit slower. Generally using `foreach_get/set` are the best
way to improve performance. See the differential revision for more
discussion about Python performance.
Cycles has been updated to use raw pointers and the internal Blender
mesh types, mostly because there is no sense in having this overhead
when it's already compiled with Blender. In my tests this roughly
halves the Cycles mesh creation time (0.19s to 0.10s for a 1 million
face grid).
Differential Revision: https://developer.blender.org/D15488
|
|
When allocating new `CustomData` layers, often we do redundant
initialization of arrays. For example, it's common that values are
allocated, set to their default value, and then set to some other
value. This is wasteful, and it negates the benefits of optimizations
to the allocator like D15082. There are two reasons for this. The
first is array-of-structs storage that makes it annoying to initialize
values manually, and the second is confusing options in the Custom Data
API. This patch addresses the latter.
The `CustomData` "alloc type" options are rearranged. Now, besides
the options that use existing layers, there are two remaining:
* `CD_SET_DEFAULT` sets the default value.
* Usually zeroes, but for colors this is white (how it was before).
* Should be used when you add the layer but don't set all values.
* `CD_CONSTRUCT` refers to the "default construct" C++ term.
* Only necessary or defined for non-trivial types like vertex groups.
* Doesn't do anything for trivial types like `int` or `float3`.
* Should be used every other time, when all values will be set.
The attribute API's `AttributeInit` types are updated as well.
To update code, replace `CD_CALLOC` with `CD_SET_DEFAULT` and
`CD_DEFAULT` with `CD_CONSTRUCT`. This doesn't cause any functional
changes yet. Follow-up commits will change to avoid initializing
new layers where the correctness is clear.
Differential Revision: https://developer.blender.org/D15617
|
|
This is mostly a cleanup to avoid hardcoding the eager calculation of
normals it isn't necessary, by reducing calls to `BKE_mesh_calc_normals`
and by removing calls to `BKE_mesh_normals_tag_dirty` when the mesh
is newly created and already has dirty normals anyway. This reduces
boilerplate code and makes the "dirty by default" state more clear.
Any regressions from this commit should be easy to fix, though the
lazy calculation is solid enough that none are expected.
|
|
|
|
|
|
Also fix a couple other places where normals layers weren't properly
tagged dirty or reallocated when the mesh changes.
Caused by cfa53e0fbeed7178. When the size of a mesh changes,
the normal layers need to be reallocated. There were a couple of places
that cleared other runtime data with `BKE_mesh_runtime_clear_geometry`
but didn't deal with normals properly. Clearing the runtime "geometry"
is different from clearing the normals, because sometimes the size of
the normal layers doesn't have to change, in which case simply tagging
them dirty is fine.
|
|
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
|
|
|
|
Also use doxy style function reference `#` prefix chars when
referencing identifiers.
|
|
Avoid computationally expensive copying operations
when only some settings have been modified.
This is done by adding support for updating parameters
without tagging for copy-on-write.
Currently only mesh data blocks are supported,
other data-blocks can be added individually.
This prepares for changing values such as edit-mesh auto-smooth angle
in edit-mode without duplicating all mesh-data.
The benefit will only be seen when the user interface no longer tags
all ID's for copy on write updates.
ID_RECALC_GEOMETRY_ALL_MODES has been added to support situations
where non edit-mode geometry is modified in edit-mode.
While this isn't something user are likely to do,
Python scripts may change the underlying mesh.
Reviewed By: sergey
Ref D11377
|
|
Some warnings remain that require larger changes.
|
|
Approximately 91 spelling corrections, almost all in comments.
Differential Revision: https://developer.blender.org/D10288
Reviewed by Harley Acheson
|
|
|
|
|
|
This calculated tessfaces, not loop-triangles.
Remove this since they aren't accessible from RNA anymore.
|
|
This function makes it possible to clear/remove/nuke all the geometry in
a mesh, allowing functions like `Mesh.from_python()` to construct a new
mesh in its place. Without this function, code like in T67627 have to
allocate a new Mesh datablock, fill that, and swap out the old Mesh for
the new one. This introduces issues when exporting, as the new mesh
could be seen by an exporter as unrelated to the old one.
Shape keys are not freed by this function. Freeing those would require
tagging the depsgraph for relations update, which is an expensive
operation. They should be removed explicitly if necessary.
Material slots are also not cleared by this function, in the same way
that they are not cleared when manually removing all geometry from a
mesh.
The `BKE_mesh_clear_geometry()` function is available in Python as
`mesh.clear_geometry()`.
Reviewed by: mont29, brecht
Differential Revision: https://developer.blender.org/D5373
|
|
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
Now it will be simpler for code jsut wanting to preserve custom normals
around to set them, without having to add same boiler plate code all the
time around actual code.
|
|
While \file doesn't need an argument, it can't have another doxy
command after it.
|
|
Move \ingroup onto same line to be more compact and
make it clear the file is in the group.
|
|
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
|
|
|
|
Needed for context menu checks.
|
|
|
|
Loop triangles are tessellated triangles create from polygons, for renderers
or exporters that need to match Blender's polygon tesselation exactly. These
are a read-only runtime cache.
Tessfaces are a legacy data structure from before Blender supported n-gons,
and were already mostly removed from the C code.
Details on porting code to loop triangles is in the release notes.
Differential Revision: https://developer.blender.org/D3539
|
|
|
|
|
|
We were using int's for bool arguments in BKE,
just to avoid having wrapper functions.
|
|
|
|
|
|
- NOCHECK -> ALL
- ALL -> MAYBE_ALL
Where 'MAYBE_ALL' checks to see if the mesh has changed.
This is clearer that `BKE_MESH_BATCH_DIRTY_ALL` is dirty and
going to be updated without any guess-work.
|
|
|
|
BKE_depsgraph.h
This removes BKE_depsgraph.h and depsgraph.c
|
|
Generalize derived-mesh tangent calculation so
it can be used by Batch cache creation too.
|
|
New logic of split_faces was leaving mesh in a proper state
from Blender's point of view, but Cycles wanted loop normals
to be "flushed" to vertex normals.
Now we do such a flush from Cycles side again, so we don't
leave bad meshes behind.
Thanks Bastien for assistance here!
|
|
|
|
This way render engine can request mesh to be auto-split and not
worry about implementing this functionality on it's own.
Please note that this split is to be performed prior to tessellation.
|
|
internal flags.
This gives us 9 flags available again for properties (we had none anymore),
and also makes things slightly cleaner.
To simplify (and make more clear the differences between mere properties
and function parameters), also added RNA_def_parameter_flags function (and
its clear counterpart), to be used instead of RNA_def_property_flag for
function parameters.
This patch is also a big cleanup (some RNA function definitions were
still using 'prop' PropertyRNA pointer, etc.).
And yes, am aware this will be annoying for all branches, but we really need
to get new flags available for properties (will need at least one for override, etc.).
Reviewers: sergey, Severin
Subscribers: dfelinto, brecht
Differential Revision: https://developer.blender.org/D2400
|
|
Those new functions invert the winding of polygons, effectively inverting their normals.
A helper was also added to allow swapping two items in customdata layers.
Being able to invert normals outside of BMesh area is very important in several places,
like IO scripts or customnormals modifiers...
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D1814
|
|
shapekey.
Title says pretty much everything, we now have BKE and RNA funcs to get vertex, poly and
loop normals of a given shapekey.
This will be used e.g. in FBX exporter (shapekeys need normal data too).
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D1510
|
|
py script
Missing update tagging...
Safe for 2.74.
|
|
Added an utility function which performs vertex split based on the loop
normal so now backing API matches to what's happening in Cycles and BI
in terms of autosplit.
Reviewers: dfelinto, campbellbarton
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D1174
|
|
|
|
The purpose of this change is to add extra possibility to render engines and
export scripts to reduce peak memory footprint during their operation.
This new argument should be used with care since it'll leave mesh in not really
compatible with blender format, but it's ok to be used on temp meshes.
Unfortunately, it's hard to get scene where it'll show huge benefit because
in my tests with cycles peak memory is reached in MEM_printmemlist_stats().
However, in the file with sintel dragon it gives around 1gig of memory benefit
after removing the polys which would allow other heavy to compute stuff such as
hair (or even pointiness calculation) to not be a peak memory usage.
In any case, this change is nice to have IMO, and only means more parts of
scene export code should be optimized memory-wise.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D1125
|
|
cleanup_cddata -> clean_customdata
|
|
'.', was a bit too rough.
|