Age | Commit message (Collapse) | Author |
|
This commit resolves these RNA warnings:
```
offset: "", WARN (bpy.rna): ...\source\blender\python\intern\bpy_rna.c:1505 pyrna_enum_to_py: current value '65536' matches no enum in 'FloatProperty', 'offset', 'subtype'
project_limit: "", WARN (bpy.rna): ...\source\blender\python\intern\bpy_rna.c:1505 pyrna_enum_to_py: current value '65536' matches no enum in 'FloatProperty', 'project_limit', 'subtype'
falloff_radius: "", WARN (bpy.rna): ...\source\blender\python\intern\bpy_rna.c:1505 pyrna_enum_to_py: current value '65567' matches no enum in 'FloatProperty', 'falloff_radius', 'subtype'
```
|
|
This improve the cloth modeling workflow by allowing you to weld only the
edges that are used for the sewing forces.
Reviewed By: mano-wii, weasel
Differential Revision: https://developer.blender.org/D10710
|
|
When a vertex group is used to limit the influence of the modifier
to a subset of vertices, binding data for vertices with zero weight
is not needed. This wastes memory, disk space and CPU cycles.
If the vertex group contents is known to be final and constant,
it is reasonable to optimize by only storing data group vertices.
This has to be an option in case the group can change.
Supporting this requires adding a vertex index field and spliting
the vertex count into mesh and bind variants, but both happen to
fit in available padding. The old numverts field is renamed to the
new bound vertex count field to maintain the array length invariant.
Versioning is used to initialize the other new fields.
If a file with sparse binding is opened in an old blender version,
it is corrupted into a non-sparse bind with vertex count mismatch,
preventing the modifier from working until rebind.
Differential Revision: https://developer.blender.org/D11924
|
|
This adds id_properties_clear() and id_properties_ensure() functions
to RNA structs. This is meant as an initial change based on discussion
in review of D9697. However, they may be useful in other situations.
The change requires refactoring the internal idproperties callback to
return a pointer to the IDProperty pointer, which actually turns out
to be quite a nice cleanup.
An id_properties attribute could be added in the future potentially.
Differential Revision: https://developer.blender.org/D11908
|
|
This commit moves the storage of `bDeformGroup` and the active index
to `Mesh`, `Lattice`, and `bGPdata` instead of `Object`. Utility
functions are added to allow easy access to the vertex groups given
an object or an ID.
As explained in T88951, the list of vertex group names is currently
stored separately per object, even though vertex group data is stored
on the geometry. This tends to complicate code and cause bugs,
especially as geometry is created procedurally and tied less closely
to an object.
The "Copy Vertex Groups to Linked" operator is removed, since they
are stored on the geometry anyway.
This patch leaves the object-level python API for vertex groups in
place. Creating a geometry-level RNA API can be a separate step;
the changes in this commit are invasive enough as it is.
Note that opening a file saved in 3.0 in an earlier version means
the vertex groups will not be available.
Differential Revision: https://developer.blender.org/D11689
|
|
This adds a viewer node similar to the one in the compositor.
The icon in the headers of nodes is removed because it served
the same purpose and is not necessary anymore.
Node outputs can be connected to the active viewer using
ctrl+shift+LMB, just like in the compositor. Right now this collides
with the shortcut used in the node wrangler addon, which will
be changed separately.
As of now, the viewed geometry is only visible in the spreadsheet.
Viewport visualization will be added separately.
There are a couple of benefits of using a viewer node compared
to the old approach with the icon in the node header:
* Better support for nodes that have more than one geometry output.
* It's more consistent with the compositor.
* If attributes become decoupled from geometry in the future,
the viewer can have a separate input for the attribute to visualize.
* The viewer node could potentially have visualization settings.
* Allows to keep "visualization points" around by having multiple
viewer nodes.
* Less visual clutter in node headers.
Differential Revision: https://developer.blender.org/D11470
|
|
Also use doxy style function reference `#` prefix chars when
referencing identifiers.
|
|
|
|
* Boolean Modifier > Fast > Overlap Threshold (Logarithmic).
* Remesh Modifier > Voxel > Voxel Size (Logarithmic).
* Sculpt > Dyntopo > Detail Size (Cubic).
Ref D9074
|
|
The `bisect_distance` in the mirror modifier was hard-coded to `0.001`.
This would result in some unexpected behavior like vertices close
to the mirror plane being deleted or merged.
The fix now adds a parameter to the mirror modifier to expose the
bisect distance to the user. The default is set to the previous
hard-coded value to not "change" previous files.
Ref D10201
|
|
Warnings in tooltips were using inconsistent formatting, some in
parantheses, some not, some in caps, others not, some on new lines,
some not, etc.
This patch uses a consistent new line and no capitals for these cases.
Differential Revision: https://developer.blender.org/D9904
|
|
A few changes to make this consistent with other modifier panels:
- Title case for UI labels
- Use property split (and therefore decorators)
- Declare sublayout variables after getting modifier info
|
|
projectors
Make this clear in property UI descriptions and deactivate aspect &
scale fields if no camera projectors are present.
ref T86268
Maniphest Tasks: T86268
Differential Revision: https://developer.blender.org/D10634
|
|
|
|
The commit rB6f63417b500d that made exact boolean work on meshes
with holes (like Suzanne) unfortunately dramatically slowed things
down on other non-manifold meshes that don't have holes and didn't
need the per-triangle insideness test.
This adds a hole_tolerant parameter, false by default, that the user
can enable to get good results on non-manifold meshes with holes.
Using false for this parameter speeds up the time from 90 seconds
to 10 seconds on an example with 1.2M triangles.
|
|
|
|
In Blender, we used to use the term 'draw' to refer to information
displayed to the user. For version 2.80, it was decided to change these
instances to 'display' instead. This was to avoid the ambiguity between
end-user drawing tools and display options.
From the Oxford English Dictionary:
- Draw: produce (a picture or diagram) by making lines and marks on
paper with a pencil, pen, etc.
- Display: show (data or an image) on a computer, television, or
other screen.
Therefore, we should use draw when referring to drawing tools for
making marks, but use display when referring to information
shown/displayed to the user. From a user POV, the computer displays
certain information, whereas the user draws a mark.
Apparently this change was not implemented consistently, so this patch
changes all remaining relevant instances of "draw".
Differential Revision: https://developer.blender.org/D10551
|
|
Changes include using proper and consistent grammar, simplifying
phrasing, using correct terminology, and not including python API
identifiers in tooltips.
Differential Revision: https://developer.blender.org/D9924
|
|
|
|
|
|
Useful for interoperability, and allows to change default mode
without breaking compatibility.
|
|
Was duplicated from SUBSURF_UV_SMOOTH_PRESERVE_BOUNDARIES value.
|
|
The RNA path used for animating the settings passed to the node tree
is incorrect. Currently it's just `settings.property_name`, but it's
the path from the ID, not the modifier, so it should be
`modifiers[modifier_name].settings.property_name`.
However, the "Settings" struct is separated in RNA and DNA, which means
that the callback to get the RNA path does not know about the modifier's
name in order to fill the above path, so some reference to the modifier
in the "Settings" struct would be necessary, which would create a
convoluted layout in the `ModifierData` struct.
Instead, this commit simply removes the "Settings" struct from RNA,
which isn't as elegant from the point of view of the Python API,
but otherwise it's a nice simplification. Note that we don't remove the
"Settings" struct from DNA, because it would break reading old files.
Differential Revision: https://developer.blender.org/D10175
|
|
|
|
This was reported for the Triangulate geometry node, but was also true
for the triangulate modifier and in exporters.
Note the modifier was introduced with "Ngon Method" in rBa7b44c82e5b9 but
was renamed to "Polygon Method" in rBf4762eb12ba5.
Since quads are also polygons (and quads have their own method), the
term "N-gon" is more appropriate here and is also described in the
glossary https://docs.blender.org/manual/en/2.92/glossary/
index.html#term-N-gon
Docs have been updated in rBM7539 (partially - the method would also
have to be renamed once this patch lands).
Note this also fixes the wrong enum used for the alembic exporter.
Fixes T83907
Maniphest Tasks: T83907
Differential Revision: https://developer.blender.org/D10022
|
|
Approximately 195 changes of capitalization to conform to MLA title style.
UI labels and property names should use MLA title case, while descriptions
should be capitalized like regular prose, generally with only the start of
a sentence capitalized.
Differential Revision: https://developer.blender.org/D9922
|
|
Node tree types from addons were selectable in the modifier's drop-down.
Obviously they didn't do anything, but it shouldn't be possible anyway.
This was just caused by an unimplemented poll function.
|
|
Unifying range descriptions as a value 'to' a value.
Differential Revision: https://developer.blender.org/D9771
Reviewed by Julian Eisel
|
|
Prepare for `BLI_str_unescape` which doesn't read well
without the separator.
|
|
|
|
Implement improvement from T73139 for merging along edges.
It is now called "Connected" mode, while the default is called "All".
With the recent performance improvement, the Connected Mode is in some
cases only double the speed than the usual merge all strategy but in
other cases it may be even faster. The bottleneck is somewhere further
down the line of merging geometry.
The motivation for this patch came from T80897, because the merging in
complex solidify is making it very slow.
Now merging can be removed from solidify without greater consequences,
as this is just a quicker and more advanced algorithm to do the same
thing that solidify currently does slowly.
Reviewed by: mano-wii, campbellbarton
Ref D8966
|
|
Until there is a icon made specially for this, the nodetree icon is up
for grabs. Using it in the nodegroup + modifier + editor helps the users
to make a connection on where to edit those modifiers.
|
|
The ones around the simulation datablock are still there, since they are not
needed for the features planned for master yet.
|
|
This commit adds functions to set and get the object's active
modifier, which is stored as a flag in the ModifierData struct,
similar to constraints. This will be used to set the context in
the node editor. There are no visible changes in this commit.
Similar to how the node editor context works for materials, this commit
makes the node group displayed in the node editor depend on the active
object and its active modifier. To keep the node group from changing,
just pin the node group in the header.
* Shortcuts performed while there is an active modifier will affect
only that modifier (the exception is the A to expand the modifiers).
* Clicking anywhere on the empty space in a modifier's panel will make it active.
These changes require some refactoring of object modifier code. First
is splitting up the modifier property invoke callback, which now needs
to be able to get the active modifier separately from the hovered
modifier for the different operators.
Second is a change to removing modifiers, where there is now a separate
function to remove a modifier from an object's list, in order to handle
changing the active.
Finally, the panel handler needs a small tweak so that this "click in panel"
event can be handled afterwards.
|
|
This is the initial merge from the geometry-nodes branch.
Nodes:
* Attribute Math
* Boolean
* Edge Split
* Float Compare
* Object Info
* Point Distribute
* Point Instance
* Random Attribute
* Random Float
* Subdivision Surface
* Transform
* Triangulate
It includes the initial evaluation of geometry node groups in the Geometry Nodes modifier.
Notes on the Generic attribute access API
The API adds an indirection for attribute access. That has the following benefits:
* Most code does not have to care about how an attribute is stored internally.
This is mainly necessary, because we have to deal with "legacy" attributes
such as vertex weights and attributes that are embedded into other structs
such as vertex positions.
* When reading from an attribute, we generally don't care what domain the
attribute is stored on. So we want to abstract away the interpolation that
that adapts attributes from one domain to another domain (this is not
actually implemented yet).
Other possible improvements for later iterations include:
* Actually implement interpolation between domains.
* Don't use inheritance for the different attribute types. A single class for read
access and one for write access might be enough, because we know all the ways
in which attributes are stored internally. We don't want more different internal
structures in the future. On the contrary, ideally we can consolidate the different
storage formats in the future to reduce the need for this indirection.
* Remove the need for heap allocations when creating attribute accessors.
It includes commits from:
* Dalai Felinto
* Hans Goudey
* Jacques Lucke
* Léo Depoix
|
|
The Vertex Weight Edit Modifier already got the Custom Curve, there was no
real reason for the proximity not to have it as well.
With some fixes by Bastien Montagne (@mont29).
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D9594
|
|
|
|
This commit uses an enum to access expansion for specific panels for
each modifier, constraint, etc. Even though these values are quite simple,
this can help make the code more explicit when the ui_expand_flag is
accessed directly. Also update comments about this bitfield to make
them consistent.
|
|
The simple subdivision as a type only causes issues like no-continuous
normals across edges, inability to reliably switch the type and things
like this.
The new subdivision operators supports wider variety of how to add
details to the model, which are more powerful than a single one-time
decision on the subdivision type.
The versioning code is adjusting topology converter to specify all
edges as infinitely sharp. The reason for this (instead of using
settings.is_simple) is because in a longer term the simple subdivision
will be removed from Subsurf modifier as well, and will be replaced
with more efficient bmesh-based modifier.
This is finished up version of D8436.
Differential Revision: https://developer.blender.org/D9350
|
|
Those two features are not directly related and one might be activated
in master earlier than the other.
WITH_PARTICLE_NODES was removed, because we continue the project
under the name "Geometry Nodes".
|
|
The design for how we approach the "Everything Nodes" project
has changed. We will focus on a different part of the project initially.
While future me will likely refer back to some of the code I remove here,
there is no point in keeping this code around in master currently.
It would just confuse other developers working on the project.
This does not remove the simulation modifier and data block. Those are
just cleaned up, so that the boilerplate code can be reused in the future.
|
|
|
|
Corrects incorrect usages of the words 'then' and 'than'.
Differential Revision: https://developer.blender.org/D9246
Reviewed by Campbell Barton
|
|
This modifier is the opposite of the recently added Mesh to Volume modifier.
It converts the "surface" of a volume into a mesh. The "surface" is defined
by a threshold value. All voxels with a density higher than the threshold
are considered to be inside the volume, while all others will be outside.
By default, the resolution of the generated mesh depends on the voxel
size of the volume grid. The resolution can be customized. It should be
noted that a lower resolution might not make this modifier faster. This
is because we have to downsample the openvdb grid, which isn't a cheap
operation.
Converting a mesh to a volume and then back to a mesh is possible,
but it does require two separate mesh objects for now.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D9141
|
|
The strength has a high impact on performance. With the previous
step and default one could easily and accidentally make Blender unusably
slow, because of a too high displacement strength.
|
|
The 0.1 limit was too large. The issue with making it smaller is that
one can easily crash blender by making it to small. To counteract this,
the step has been reduced as well.
A voxel size/amount of 0 disables the modifier.
|
|
This modifier uses a 3D texture to displace a volume.
For now, this can only use the previously existing texture system,
because we do not have a better alternative yet. Still, the results
can be quite good and interesting. See D9075 for some examples.
Reviewers: brecht, simonthommes
Differential Revision: https://developer.blender.org/D9075
|
|
As noted in T80164, there are quite a few area of Blender where the
"Reset to Default Value" operator in button context menus doesn't work.
Modifiers are one of them, because the DNA defaults system was never
set up for them.
Additionally, this should make modifier versioning easier. Whenever a
new field is added it should be automatically initialized to the
default value.
I had to make some ordering changes in the following modifiers to work
around an error with `-Wsign-conversion` in the macros:
- Solidify Modifier
- Corrective Smooth Modifier
- Screw Modifier
Some modifiers are special cases and are skipped in this commit:
- Data Transfer Modifier
- Cloth Modifier
- Fluid Modifier
- Softbody Modifier
Differential Revision: https://developer.blender.org/D8747
|
|
This adds an option to smooth UV boundaries including corners, and renames the
available options to None / Keep Corners / All.
Ref D8413
|
|
This adds the option to either smooth the entire boundary, or to keep
corners sharp, for the Subdivision Surface and Multiresolution modifiers.
This mainly helps with compatibility with other software. The default
behavior remains to smooth the entire boundary.
Differential Revision: https://developer.blender.org/D8485
|