| Age | Commit message (Collapse) | Author |
|---|
|
Threaded Sculpt is now always enabled by default. If it causes
performance problems compared single threaded sculpt it should be
considered a bug.
Reviewed By: sergey
Maniphest Tasks: T77638
Differential Revision: https://developer.blender.org/D7960
|
|
Part of T74432.
Mostly a careful batch rename but had to do few smaller fixes.
Also ran clang-format on affected files.
|
|
Follow up of b2ee1770d4c3 and 10c2254d412d, part of T74432.
Now the area and region naming conventions should be less confusing.
Mostly a careful batch rename but had to do few smaller fixes.
Also ran clang-format on affected files.
|
|
In Blender 2.81 we update and draw all nodes inside the view planes.
When navigating with a pen tablet after an operation that tags the whole
mesh to update (like undo or inverting the mask), this introduces some
lag as nodes are updating when they enter the view. The viewport is not
fully responsive again until all nodes have entered the view after the
operation.
This commit delays nodes updates until the view navigation stops, so the
viewport navigation is always fully responsive. This introduces some
artifacts while navigating, so it can be disabled if you don't want to
see them.
I'm storing the update planes in the PBVH. This way I can add support
for some tools to update in real-time only the nodes inside this plane
while running the operator, like the mesh filter.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6269
|
|
This adds the automasking options to the Sculpt Tool options in a way
that they affect all brushes. This is more convenient when working with
some of these options while switching brushes as they don't need to be
enabled/disabled per brush.
An automasking option is enabled if it is enabled in the brush or in the
sculpt options.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7304
|
|
|
|
This commit is a full refactor of the grease pencil modules including Draw Engine, Modifiers, VFX, depsgraph update, improvements in operators and conversion of Sculpt and Weight paint tools to real brushes.
Also, a huge code cleanup has been done at all levels.
Thanks to @fclem for his work and yo @pepeland and @mendio for the testing and help in the development.
Differential Revision: https://developer.blender.org/D6293
|
|
Face Sets are the new system to control the visibility state of the mesh in sculpt and paint modes. They are designed to work in modes where brushes are the primary way of interaction and they provide much more control when working with meshes with complex shapes and overlapping surfaces.
This initial commit includes:
- Sculpt Face Sets data structures and PBVH rendering.
- Face Set overlay and opacity controls.
- Sculpt Undo support.
- Remesher reprojection support. The visibility state of the mesh is also preserved when remeshing.
- Automasking and Mesh filter support.
- Mask expand operator mode to expand Face Sets (Shift + W) and flood fill areas by connectivity (press Ctrl while expanding).
- Sculpt Mode Face Sets and Visibility API.
- Sculpt Face Sets creation and visibility management operators.
- Operator to randomize the Face Sets colors.
- Draw Face Sets brush tool to create and edit the Face Sets. Drawing on the mesh creates a new Face Set. Pressing Ctrl before drawing modifies the Face Set under the brush at the beginning of the stroke.
- Updated keymap and menu to work with Face Sets from Sculpt Mode (H to toggle visibility, Alt + H to show all, Shit + H to hide).
- Pie menu on the W key with Face common Sets operations.
Know limitations:
- Multires support. The Face Sets and Visibility API needs to be implemented for Multires.
Reviewed By: jbakker, #user_interface, Severin
Differential Revision: https://developer.blender.org/D6070
|
|
Avoids errors like T70281 slipping through.
|
|
Caused by rB914427afd512.
Since above commit 'pe_get_current' checks for an active depsgraph. This
caused the skipping of handling
`PT_CACHE_EDIT_UPDATE_PARTICLE_FROM_EVAL`for everything calling
`PE_get_current` (this passes a NULL depsgraph as opposed to
`PE_create_current`). So we now pass a depsgraph here as well...
Note there are two RNA cases where we pass NULL, namely
- rna_ParticleEdit_editable_get
- rna_ParticleEdit_hair_get
I guess these should be fine though (no functional change to current
master)
Reviewers: sergey
Maniphest Tasks: T69488
Differential Revision: https://developer.blender.org/D5752
|
|
Set to Pixel.
|
|
It was using "screen_grab_size" as label.
|
|
These are now set from DNA defaults.
|
|
The same code was duplicated and now it was moved to shared function.
|
|
+ Simplify code, move into own function and run once rather than on every point
+ Improved snapping when a stroke is between increments
+ Added ISO grid option for lines specified by Angle under guide settings
+ Radial snapping mode uses Angle as an offset
Differential Revision: https://developer.blender.org/D5668
|
|
The old layout of `PointerRNA` was confusing for historic reasons:
```
typedef struct PointerRNA {
struct {
void *data;
} id;
struct StructRNA *type;
void *data;
} PointerRNA;
```
This patch updates it to:
```
typedef struct PointerRNA {
struct ID *owner_id;
struct StructRNA *type;
void *data;
} PointerRNA;
```
Throughout the code base `id.data` was replaced with `owner_id`.
Furthermore, many explicit pointer type casts were added which
were implicit before. Some type casts to `ID *` were removed.
Reviewers: brecht, campbellbarton
Differential Revision: https://developer.blender.org/D5558
|
|
Actually, the selection mode is not visible in Sculpt mode when mask is enabled, but still is used.
Also, the mode is shared between Edit mode and Sculpt mode and for meshes the selector is by mode.
This commit splits the select mode in different properties and show the selector in Sculpt mode to define the Select mode. Also, the Select Mask button has been removed and now the Select Mode buttons work equal to Meshes where the select buttons are the mask enable too.
Fixed some old code not valid detected during these changes.
Differential Revision: https://developer.blender.org/D5500
|
|
This should have been removed in 2.80 as the functionality was removed.
This feature now does not do anything and can be removed.
Differential Revision: https://developer.blender.org/D5411
|
|
|
|
The target value was affecting the lower value and this was weird. Now the value is clamped between 0 and target weight.
|
|
|
|
In 2.7x UV sculpt was a kind of sub-mode
(a toggle with it's own key-map & drawing code).
Move this to an operator that uses the tool-system,
this simplifies internal logic, especially brush selection
which now matches sculpt and other paint modes.
- Remove toggle used to enable uv sculpt.
- Expose the brush, which was already used but there was no way to
select different brushes.
- Make UV sculpt use paint paint tool slots
(using brushes how all other paint mode currently do).
- Move UV Sculpt keymap to the tools keymap.
- Remove Q to toggle UV sculpt mode,
S/P/G keys to switch tools.
|
|
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
|
|
|
|
|
|
This commit groups several options that were tested in grease pencil branch:
- Changes to fill algorithms and improves, specially in small areas and stroke corners.
New options has been added in order to define how the fill is working and internally there are optimizations in detect the small areas in the extremes.
Kudos to @charlie for coding this fill improvements.
- New 3D cursor view plane option.
Now it's possible to lock the drawing plane to the 3D cursor and use the 3D cursor orientation. This allows more flexibility when you are drawing and reduce the need to create geometry to draw over surfaces.
- Canvas Grid now can be locked to 3D cursor.
- New option to reproject stroke using 3D cursor.
- Small tweaks and fixes.
Changes reviewed by @pepeland and @mendio
|
|
Mostly functions wrapping args, not confirming to our style guide.
|
|
When manually selecting a different image, this image will become pinned and
continue to show. The material node is not automatically modified as it was in
old Blender versions, only the image displayed in the UV editor.
Fixes T61239: confusing behavior when unwrapping non-square images. By showing
the relevant image by default it's more clear why it does aspect correction.
|
|
Convention was not to but after discussion on 918941483f7e we agree its
best to change the convention.
Names now mostly follow RNA.
Some exceptions:
- Use 'nodetrees' instead of 'nodegroups'
since the struct is called NodeTree.
- Use 'gpencils' instead of 'grease_pencil'
since 'gpencil' is a common abbreviation in the C code.
Other exceptions:
- Leave 'wm' as it's a list of one.
- Leave 'ipo' as is for versioning.
|
|
This causes other issues, revert for now until a better fix is found.
Reverts commit da1323d1c95095feff98e8aa054d73fd323c363d.
|
|
|
|
The none brush doesn't make sense to have anymore with the tool system.
Also remove deprecated flags & types for object, armature & text.
|
|
Now always refresh when the material changes. Depsgraph tag moved out
of the refresh function since that gets called on depsgraph update,
which should not trigger a second depsgraph update.
|
|
- Many factor properties were set to PROP_NONE,
even properties that had 'Factor' in the name!
- Some time properties were not set to PROP_TIME,
especially in Particles.
- Changed motion_blur_shutter to use a soft max value of 1 instead of 2.
Anything > 1 here is not physically correct
and makes no real logical sense.
- Changed display name of Dynamic Paint dissolve_speed to Dissolve Time,
since it's a time property, not speed.
|
|
While \file doesn't need an argument, it can't have another doxy
command after it.
|
|
Move \ingroup onto same line to be more compact and
make it clear the file is in the group.
|
|
Needed for clan-format not to wrap onto one line.
|
|
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
|
|
|
|
|
|
This commit groups a set of new tools that were tested in grease pencil object branch before moving to master. We decide to do all the development in a separated branch because it could break master during days or weeks before the new tools were ready to deploy.
The commit includes:
- New Cutter tool to trim strokes and help cleaning up drawings.
- New set of constraints and guides to draw different types of shapes. All the credits for this development goes to Charlie Jolly (@charlie), thanks for your help!
- Segment selection mode to select strokes between intersections.
- New operator to change strokes cap mode.
- New option to display only keyframed frames. This option is very important when fill strokes with color.
- Multiple small fixes and tweaks.
Thanks to @pepeland and @mendio for their ideas, tests, reviews and support.
Note: Still pending the final icons for Cutter in Toolbar and Segment Selection in Topbar. @billreynish could help us here?
|
|
The overlay should now use the texture interpolation setting in material
mode.
In image mode, there is now a new button to let the user choose the texture
filter. The option is located in the Texture Slots popover and only shows
in Image mode.
|
|
Match name of mesh weight paint.
|
|
|
|
Also (mostly in comments): behaviour -> behavior (we use American English).
|
|
The sculpt mask diffuse color is not working right now. But when it does it
should follow on the fix for the sculpt mask drawing update (e113b402bd57).
|
|
Reported as part of T59576.
|
|
This commit adds support for new curve tool and adds more functionalities to the existing primitives, including new handles, editing, stroke thickness curve, noise, preview of the real stroke, etc.
Thanks to @charlie for his great contribution to this improvement.
|
