| Age | Commit message (Collapse) | Author |
|---|
|
This modifier uses a mask set in the modifier settings
and multiplies strip by it. Alpha channel will also be
multiplied by mask, which makes it easy to mask some
objects on footage and alpha-over them in sequencer.
Actually, this modifier sets alpha for byte strips
directly (since byte is always straight alpha) and
multiplies float buffer by mask (flaots are premulled)
so in both cases masked strip could be easy alpha-overed
without any artifacts.
It uses own structure with only SequenceModifierData
property in to preserve both forward and backwards
compatibilities (using new structure ensures modifier
will be ignored on load in older blenders, the same
happens for mesh modifiers actually).
Request from Pablo Vazquez.
|
|
Was a regression in rev53509, whic hallowed manual edit of properties
which weren't supposed to be editing manually.
Added the same effects length update as in trnaslation code, so now
updating strip frames from py/interface will keep things consistent.
|
|
|
|
|
|
you can specify precision=0 for this, and use -1 for the default 2.
|
|
* Remove "use_frame_blend" from RNA and UI file, not used anywhere in the code, also mark SEQ_SPEED_BLEND as deprecated.
|
|
mouse drag footage(image sequence)
As those two properties do not need a custom set func, yet need recalc of strips drawing/positions in addition to usual rna_Sequencer_update() (cache invalidating), I renamed rna_Sequence_frame_change_update to do_sequence_frame_change_update, and made a new rna_Sequence_frame_change_update which is directly usable as RNA update func, and call both the strip and cache update funcs.
Thanks to Sergey for advices!
|
|
|
|
|
|
Use COLOR_GAMMA subtype for new image color since this color is
actually being color managed. Also made it so byte and float
buffers would have the same exact display color after creation
with the same color value.
Also made it so color strip's color have COLOR_GAMMA subtype,
otherwise swatch color wouldn't match render result which is
not nice at all.
|
|
|
|
|
|
|
|
- add sequence.update(data=False) function.
- made some sequence vars editable.
- correct some comments.
also rename rna function sequence.getStripElem() --> strip_elem_from_frame()
|
|
This assumptions are now made:
- Internally float buffers are always linear alpha-premul colors
- Readers should worry about delivering float buffers with that
assumptions.
- There's an input image setting to say whether it's stored with
straight/premul alpha on the disk.
- Byte buffers are now assumed have straight alpha, readers should
deliver straight alpha.
Some implementation details:
- Removed scene's color unpremultiply setting, which was very
much confusing and was wrong for default settings.
Now all renderers assumes to deliver premultiplied alpha.
- IMB_buffer_byte_from_float will now linearize alpha when
converting from buffer.
- Sequencer's effects were changed to assume bytes have got
straight alpha. Most of effects will work with bytes still,
however for glow it was more tricky to avoid data loss, so
there's a commented out glow implementation which converts
byte buffer to floats first, operates on floats and returns
bytes back. It's slower and not sure if it should actually
be used -- who're using glow on alpha anyway?
- Sequencer modifiers should also be working nice with straight
bytes now.
- GLSL preview will predivide float textures to make nice shading,
shading with byte textures worked nice (GLSL was assuming straight
alpha).
- Blender Internal will set alpha=1 to the whole sky. The same
happens in Cycles and there's no way to avoid this -- sky is
neither straight nor premul and doesn't fit color pipeline well.
- Straight alpha mode for render result was also eliminated.
- Conversion to correct alpha need to be done before linearizing
float buffer.
- TIFF will now load and save files with proper alpha mode setting
in file meta data header.
- Remove Use Alpha from texture mapping and replaced with image
datablock setting.
Behaves much more predictable and clear from code point of view
and solves possible regressions when non-premultiplied images were
used as textures with ignoring alpha channel.
|
|
This two things were using the same DNA and RNA structures because
internally they're completely the same. However, that was confusing
from the interface point of view.
Now it should be much more clear what's going on there.
|
|
often takes several forms depending on its related noun's gender, in non-english languages). Note though this does not completly solve the problem (python "New" is still uncontextual).
Moved AUDIO context to ID_SOUND (let's try to keep this as simple as possible!).
Also done some cleanup. Relevant i18n tools edits will follow.
|
|
|
|
authors to avoid bugs with accessing removed data.
|
|
Also please define and use constants in BLF_translation.h rather than directly typing contexts' names, it's safer (typo would break at compile time, instead of generating more contexts!).
|
|
mouse (grab tool)
The issue was caused by SEQ_BEGIN macro modifying sequence's depth
which ruined transformation routines. Used own DFS instead which
doesn't modify sequences.
Also corrected some typos in api and comments.
|
|
tip->tooltip for custom properties
Tracked in [#31062] [2.6x] Context Ambiguity List & Discussion (keep updating)
|
|
|
|
|
|
Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
|
|
when rendering
This avoids having bunch of cached images when doing animation rendering,
keeping all the memory available for rendered itself.
This keeps memory usage low when rendering huge edits with mixed
scenes and movie strips.
This should not affect on sped of video encoding, which was confirmed by
some own tests.
--
svn merge -r50051:50052 ^/branches/soc-2011-tomato
|
|
Initial idea of this input was re-designed in a bit more flexible
way using modifiers.
Also since Color Balance (which was the only thing using effect
mask input) was moved to the modifiers, this input field became
rudiment.
It's pretty tricky to write versioning code to prevent possible
data in cases this field was used, but hope it wouldn't be difficult
to switch to modifiers masks.
|
|
Having two ways to control color balance now seems a bit overkill
and not clear.
Removed old Color Balance settings from the interface and logic,
added versioning code to convert this settings to modifier.
Unfortunately, since color balance was a pointer, it's not actually
possible to preserve compatibility of old files saved in new
blender and opened back in old blender.
Hopefully there's no regressions :)
|
|
|
|
Behaves in exactly the same way as bright/contrast compositor node.
Some code could be de-duplicated, like contrast formula and mask
influence, but wouldn't call it stopper for commit since it's
already needed for grading Mango.
|
|
|
|
|
|
|
|
This implements basic color grading modifiers in sequencer, supporting
color balance, RGB curves and HUE corrections.
Implementation is close to object modifiers, some details are there:
http://wiki.blender.org/index.php/User:Nazg-gul/SequencerModifiers
Modifiers supports multi-threaded calculation, masks and instant
parameter changes.
Also added cache for pre-processed image buffers for current frame,
so changing sequence properties does not require rendering of original
sequence (like rendering scene, loading file from disk and so)
|
|
|
|
|
|
This implements option which could be used to color balance only
specified area. Currently done by adding Mask input to Adjustment
effect. Affects on color balance and multiply settings.
Supporting masked saturation control is in the list, not supported
in this commit.
Also show value slider in the right of color wheel.
|
|
Added a framework to run effects in several threads. Port most
of effects to this new framework.
Still some work to be done here (some effects are not so easy to port)
|
|
Before this the the whole sequencer cache would be invalidated
when hanging sequence settings.
This was completely annoying because changing color balance
settings would re-load image file for which color balance
is happening on every change,
In fact it's still an issue if color balance is changing for
image strip itself, but if this strip has got effect and
color balance is changing for it file wouldn't be reloaded.
|
|
|
|
|
|
|
|
then defines.
|
|
|
|
* Remove all code for Texture and Sequencer plugin system, this never worked in 2.5x / 2.6x and is therefore not needed anymore.
* DNA structures are kept, all read/writefile code is gone.
|
|
* Code cleanup
* Fixed wrong label for Inverse Select in the Select menu
* Some layout tweaks for space saving and avoid abbreviations in the UI.
* "Image Offset" and "Image Crop" buttons were there twice, once in the Strip Input panel and once in the Effect Strip panel, show it in the Strip Input panel only now.
* Commented the third input fields ("input_3"), only used by the deprecated plugin system according to an RNA comment.
|
|
|
|
autocomplete will allocate a sequencer.
... instead add scene.sequencer_editor_create / clear, these match id.animation_data_* functions.
- refactor for names, for scene level functions call them BKE_sequencer_*
|
|
- rename seqelements.push(file) --> filename
- rename SoundSequence.waveform --> show_waveform
- dont pass context to sequencer functions. editing any scenes sequence can be done, irrespective of context.
|
|
|
