| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
Support custom-data correction based on surrounding geometry for all
transformation modes of the mesh transform operators.
The is the same logic used in Vert and Edge Slide.
In order not to change the current default behavior,
this property does not affect Vert and Edge Slide modes.
|
|
This option allows posing meshes with different disconnected elements
using the Pose Brush.
This is achieved by doing the following:
- Creating an ID per vertex that stores the connected component of that vertex.
- By using those IDs, one fake topology connection is created per vertex to the nearest vertex in a different ID. The maximum distance to create that connection is determined by the "Max Element Distance" property. These fake connectivity neighbors are used in the Sculpt API functions iterators, so all the algorithms of the Pose Brush can run without modifications as if everything was part of the same mesh.
In order to make this work, the "Connected only" property of the Pose Brush needs to be disabled. This will add an extra performance cost to the Pose Brush and its preview. To achieve optimal results, max element distance should be as low as possible.
Reviewed By: sergey, campbellbarton
Differential Revision: https://developer.blender.org/D7282
|
|
|
|
Differential Revision: https://developer.blender.org/D8102
|
|
|
|
|
|
|
|
Note that this code is rather rough and slightly hacky, a proper
solution needs to be designed at some point probably, but for now this
should work fine.
As usual, master collections and root node trees remain TODO for now.
|
|
|
|
This is cleaner, but also crucial to avoid weird issues when behaviors
of those checks are modified...
|
|
The Texture Mapping Modifier was out of place
Differential Revision: https://developer.blender.org/D7474
|
|
Threaded Sculpt is now always enabled by default. If it causes
performance problems compared single threaded sculpt it should be
considered a bug.
Reviewed By: sergey
Maniphest Tasks: T77638
Differential Revision: https://developer.blender.org/D7960
|
|
I have to add some C++ code in callbacks for socket types
for the new particle system.
|
|
This is important at several level, mainly for overrides currently.
Note that this also includes shape keys, since from RNA point of view
those are also 'embedded' (they are not editable, not linkable, ...).
|
|
Those are not overridable, and comparing them is... costly.
|
|
pointer properties.
Since makesrna runs after all properties have been defined, we have to
remember with a new internal flag when we explicitely disable the
'PROP_PTR_NO_OWNERSHIP' flag for a property.
Otherwise there was no way to do so for ID pointer properties...
|
|
|
|
Enabling offset property caused strip to produce `SEQ_CACHE_STORE_RAW`
type image, which is kept in temp cache and is not invalidated.
Change update functions for all properties of effect strips that affect image
to `rna_Sequence_invalidate_raw_update`.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8132
|
|
Don't auto update render passes in nodes when unregistering render passes or
quitting Blender, this should only happen on explicit user action to change the
engine or passes.
|
|
Previously you'd have to run with --debug-value 256, now just make it
a preference so the Debug panel can be always available for developers.
|
|
This patch fixes T77878 in the same way that T72747 was fixed.
A hard minimum for the voxel size was added to avoid an arithmetics error.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8027
|
|
|
|
Ref T76058
|
|
|
|
Blender has an operator to do Copy & Paste of constraints between
objects and bones, but no simple method to do that directly via
the Python API is provided. This adds a copy() method to object
and pose bone constraint collections.
Differential Revision: https://developer.blender.org/D8112
|
|
Under the hood the CurveProfile widget (used for bevel custom profiles)
uses a bezier curve, but right now though it only supports two of the
bezier curve handle types, vector and auto. This patch adds support for
free handles and adds all of the logic for editing them.
This is the first step to the ability to import and export curve objects
in the widget.
There's some code cleanup in curveprofile.c. Movement for handles and
control points is abstracted to functions there rather than happening
in interface_handlers.c.
An "Apply Preset" button is also added, which solves a confusing issue
where you apply a preset, then change the number of samples and the
preset doesn't change. The button makes it clear that the preset needs
to be reapplied.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D6470
|
|
This commit makes uses of the new OpenVDB IO in Mantaflow (introduced in 781f783a66ac).
From now on, fluid cache files in OpenVDB format will contain a list of grids per frame (before: one .vdb file per grid per frame). Besides regular grids, particle systems are also stored using OpenVDBs PointGrid data structures.
All older cache formats will remain fully functional:
- Uni caches (.uni) files are still available from the UI and can be used as before
- Raw caches (.raw) are no longer available from the UI, but loading them is still possible
- Old OpenVDB caches (one .vdb per grid) can no longer be baked either, but loading them is still possible.
It is also no longer possible to choose file formats for 'Noise' and 'Particles'. Instead there are now options to set the file format for 'Volumetric' and for 'Mesh' data.
Known issues (planned to be resolved soon):
- OpenVDB files are currently not taking into consideration the clipping value (FluidDomainSettings). Empty cells are therefore being written too. Depending on the scene, this can make file sizes unnecessarily large.
- Domains are not being exported at their world position. Instead they are always clipped to the origin.
|
|
|
|
Related to T78153
Differential Revision: https://developer.blender.org/D8100
|
|
Sculpt Vertex Colors is a painting system that runs inside sculpt mode, reusing all its tools and optimizations. This provides much better performance, easier to maintain code and more advanced features (new brush engine, filters, symmetry options, masks and face sets compatibility...). This is also the initial step for future features like vertex painting in Multires and brushes that can sculpt and paint at the same time.
This commit includes:
- SCULPT_UNDO_COLOR for undo support in sculpt mode
- SCULPT_UPDATE_COLOR and PBVH flags and rendering
- Sculpt Color API functions
- Sculpt capability for sculpt tools (only enabled in the Paint Brush for now)
- Rendering support in workbench (default to Sculpt Vertex Colors except in Vertex Paint)
- Conversion operator between MPropCol (Sculpt Vertex Colors) and MLoopCol (Vertex Paint)
- Remesher reprojection in the Voxel Remehser
- Paint Brush and Smear Brush with color smoothing in alt-smooth mode
- Parameters for the new brush engine (density, opacity, flow, wet paint mixing, tip scale) implemented in Sculpt Vertex Colors
- Color Filter
- Color picker (uses S shortcut, replaces smooth)
- Color selector in the top bar
Reviewed By: brecht
Maniphest Tasks: T72866
Differential Revision: https://developer.blender.org/D5975
|
|
This revisit the render pipeline to support time slicing for better motion
blur.
We support accumulation with or without the Post-process motion blur.
If using the post-process, we reuse last step next motion data to avoid
another scene reevaluation.
This also adds support for hair motion blur which is handled in a similar
way as mesh motion blur.
The total number of samples is distributed evenly accross all timesteps to
avoid sampling weighting issues. For this reason, the sample count is
(internally) rounded up to the next multiple of the step count.
Only FX Motion BLur: {F8632258}
FX Motion Blur + 4 time steps: {F8632260}
FX Motion Blur + 32 time steps: {F8632261}
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D8079
|
|
This replaces the cmake options `WITH_NEW_OBJECT_TYPES` and
`WITH_NEW_SIMULATION_TYPE` with two experimental userpref settings:
* `use_new_particle_system`: Enables the point cloud type and the simulation editor.
* `use_new_hair_type`: Only displays the add-operator in the add menu for now.
Note, in the current state you can't do anything productive with the new particle
system or the new hair type. Features will be added step by step in the upcoming
weeks and months.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D8096
|
|
This will allow the easier addition of a constant radius mode in the
future and some changes in the UI to mirror the recent similar change
from "Only Vertices" to the "Affect" enum.
|
|
Using 'name' for the full path of a file reads badly,
especially when id.name is used in related code.
|
|
|
|
This was an oversight when layout headings were added. There's now the regular
translation context option in the Python API.
|
|
|
|
|
|
This feature was removed by error during the refactor done in draw engine.
Differential Revision: https://developer.blender.org/D8082
|
|
|
|
|
|
This mode is like Percent, but measures absolute distance along
adjacent edges instead of a percentage.
So, for example, if you use this mode with 2 segments and profile=1,
you will see the length that the bevel moves along unbeveled edges
between beveled ones will match the value specified.
Many users seem to expect this behavior, even though it means the
bevel width is uneven, so this option is for them.
|
|
This patch implements the list panel system D7490 for grease pencil
shader effects. It also moves their drawing to a callback in
ShaderFxTypeInfo in line with the extensible architecture refactoring
goal T75724.
The implementation is basically exactly the same as for the modifier
patch (9b099c86123fc82).
Thanks to Matias Mendiola (@mendio) for helping to develop the layout
changes.
Differential Revision: https://developer.blender.org/D7985
|
|
This patch implements the list panel system D7490 for grease pencil
modifiers. It also moves their drawing to a callback in
GpencilModifierTypeInfo in line with the extensible architecture
refactoring goal T75724.
This also adds the "set_error" function for grease pencil modifiers,
which hadn't been copied from mesh modifiers yet.
The implementation is basically exactly the same as for the modifier
patch (9b099c86123fc82).
Thanks to Matias Mendiola (mendio) for providing mockups for many
of the layout changes.
Differential Revision: https://developer.blender.org/D7978
|
|
This patch implements the list panel system D7490 for constraints.
In this case the panels are still defined in Python.
The layouts are also updated to use subpanels and the a more organized
single column layout. There may be more tweaks necessary for the
layouts.
Reviewed By: Severin, billreynish, Mets
Differential Revision: https://developer.blender.org/D7499
|
|
This adds object motion blur vectors for EEVEE as well as better noise
reduction for it.
For TAA reprojection we just compute the motion vector on the fly based on
camera motion and depth buffer. This makes possible to store another motion
vector only for the blurring which is not useful for TAA history fetching.
Motion Data is saved per object & per geometry if using deformation blur.
We support deformation motion blur by saving previous VBO and modifying the
actual GPUBatch for the geometry to include theses VBOs.
We store Previous and Next frame motion in the same motion vector buffer
(RG for prev and BA for next). This makes non linear motion blur (like
rotating objects) less prone to outward/inward blur.
We also improve the motion blur post process to expand outside the objects
border. We use a tile base approach and the max size of the blur is set via
a new render setting.
We use a background reconstruction method that needs another setting
(Background Separation).
Sampling is done using a fixed 8 dithered samples per direction. The final
render samples will clear the noise like other stochastic effects.
One caveat is that hair particles are not yet supported. Support will
come in another patch.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7297
|
|
Accessing this from RNA may actually create some data, which we do not
want to happen when comparing data. Further more, preview is not data,
but a view of it, so we should be safe ignoring it entirely here.
|
|
Currently all force effectors can only act on cloth when the force is
perpendicular to the surface. This makes sense for wind, but not for
other forces; and the user may want even wind to have some friction.
This changes effector code to output two force vectors - although
you of course can pass the same pointer for both. The force is split
between the two outputs based on a new per-effector setting.
Differential Revision: https://developer.blender.org/D8017
|
