Age | Commit message (Collapse) | Author |
|
Related to {D15885} that requires scene parameter
to be added in many places. To speed up the review process
the adding of the scene parameter was added in a separate
patch.
Reviewed By: mont29
Maniphest Tasks: T73411
Differential Revision: https://developer.blender.org/D15930
|
|
Same as eb3a561a7fe0b22abc1, but for the mesh normal arrays
introduced in b7fe27314b25a7220a.
|
|
A "lookup_int" callback needs to be provided for RNA collections
that aren't backed by DNA directly. Otherwise they will iterate from
the start of the array for every access.
|
|
The descriptions for view_layer_eval and scene_eval incorrectly duplicate the descriptions for view_layer and scene:
- https://docs.blender.org/api/current/bpy.types.Depsgraph.html?highlight=depsgraph#bpy.types.Depsgraph.view_layer_eval
- https://docs.blender.org/api/current/bpy.types.Depsgraph.html?highlight=depsgraph#bpy.types.Depsgraph.scene_eval
This patch fixes this by changing "Original" to "Evaluated."
Reviewed By: jbakker
Maniphest Tasks: T100684
Differential Revision: https://developer.blender.org/D15931
|
|
This change adds cryptomatte render passes to EEVEE-Next. Due to the upcoming viewport
compositor we also improved cryptomatte so it will be real-time. This also allows viewing
the cryptomatte passes in the viewport directly.
{F13482749}
A surface shader would store any active cryptomatte layer to a texture. Object hash is stored
as R, Asset hash as G and Material hash as B. Hashes are only calculated when the cryptomatte
layer is active to reduce any unneeded work.
During film accumulation the hashes are separated and stored in a texture array that matches
the cryptomatte standard. For the real-time use case sorting is skipped. For final rendering
the samples are sorted and normalized.
NOTE: Eventually we should also do sample normalization in the viewport in order to extract the correct
mask when using the viewport compositor.
Reviewed By: fclem
Maniphest Tasks: T99390
Differential Revision: https://developer.blender.org/D15753
|
|
corresponding data layers and using their values for computations.
Avoiding that should increase performance in many operations that
would otherwise have to read, write, or propagate these values.
It also means decreased memory usage-- not just for sculpt mode
but for any mesh that was in sculpt mode. Previously the mask, face set,
and hide status layers were *always* allocated by sculpt mode.
Here are a few basic tests when masking and face sets are not used:
| Test | Before | After |
| Subsurf Modifier | 148 ms | 126 ms |
| Sculpt Overlay Extraction | 24 ms every redraw | 0 ms |
| Memory usage | 252 MB | 236 MB |
I wouldn't expect any difference when they are used though.
The code changes are mostly just making sculpt features safe for when
the layers aren't stored, and some changes to the conversion to and
from the hide layers. Use of the ".hide_poly" attribute replaces testing
whether face sets are negative in many places.
Differential Revision: https://developer.blender.org/D15937
|
|
|
|
As described in T95966, the goal is to move to a "struct of arrays"
approach rather than gathering an arbitrary set of data in hard-coded
structs. This has performance benefits, but also code complexity
benefits (this patch removes plenty of code, though the boilerplate
for the new operators outweighs that here).
To mirror the internal change, the options for storing mesh bevel
weights are converted into operators that add or remove the layer,
like for some other layers.
The most complex change is to the solidify modifier, where bevel
weights had special handling. Other than that, most changes are
removing clearing of the weights, boilerplate for the add/remove
operators, and removing the manual transfer of bevel weights
in bmesh - mesh conversion.
Eventually bevel weights can become a fully generic attribute,
but for now this patch aims to avoid most functional changes.
Bevel weights are still written and read from the mesh in the old way,
so neither forward nor backward compatibility are affected. As described
in T95965, writing in the old format will be done until 4.0.
Differential Revision: https://developer.blender.org/D14077
|
|
- Remove "take ownership" argument which was confusing and always true
- The argument made ownership very confusing
- Better to avoid boolean arguments that switch a function's purpose
- Remove "mask" argument which was basically wrong and not used properly
- "EVERYTHING" was used because developers are wary of removing data
- Instead use `CD_MASK_MESH` for its purpose of original mesh data
- Remove use of shallow copied temporary mesh, which is unnecessary now
- Split shape key processing into separate functions and use C++ types
- Copy fields explicitly rather than using memcpy for the whole struct
- Use higher level functions and avoid redundant code
- The whole idea is pretty simple and can be built from standard logic
- Adjust `CustomData` logic to be consistent with "assign" expectations
- Clear the layer data from the source, and moves the anonymous ID
Differential Revision: https://developer.blender.org/D15857
|
|
This patch implements the Scale node for the realtime compositor.
Differential Revision: https://developer.blender.org/D15758
Reviewed By: Clement Foucault
|
|
Caused by 462014b59b4f
|
|
Essentially calls `IDTypeInfo->owner_get` for now, will make more sense
once the callback is changed to return the address of the pointer
instead.
|
|
Follows existing naming for the most part, also use "num" as a suffix
in some instances (following our naming conventions).
|
|
Note that there are still some references to proxies left, in some cases
it's unclear if the code related to the comment is even still relevant,
this goes beyond mere cleanup to address then.
|
|
Use `verts` instead of `vertices` and `polys` instead of `polygons`
in the API added in 05952aa94d33eeb50. This aligns better with
existing naming where the shorter names are much more common.
|
|
|
|
Correct error from [0] which built with GCC.
[0]: b8d986451805f324b0ba98f4b57b4cf89cee04ed
|
|
Note that lib_override functions have kept the unused argument,
but this may be removed too. It impacts many lib_override functions
so this can be handled separately.
|
|
Now that all embedded IDs have a loopback pointer to their owner, we do
need anymore extra parameters for this accessor.
|
|
|
|
The only real difference between `GPU_SHADER_2D_IMAGE` and
`GPU_SHADER_3D_IMAGE` is that in the vertex shader the 2D
version uses `vec4(pos, 0.0, 1.0)` and the 3D version uses
`vec4(pos, 1.0)`.
But VBOs with 2D attributes work perfectly in shaders that use 3D
attributes. Components not specified are filled with components from
`vec4(0.0, 0.0, 0.0, 1.0)`.
So there is no real benefit to having two different shader versions.
This will simplify porting shaders to python as it will not be
necessary to use a 3D and a 2D version of the shaders.
In python the new name for '2D_IMAGE' and '3D_IMAGE'
is 'IMAGE', but the old names still work for backward
compatibility.
|
|
For copy-on-write, we want to share attribute arrays between meshes
where possible. Mutable pointers like `Mesh.mvert` make that difficult
by making ownership vague. They also make code more complex by adding
redundancy.
The simplest solution is just removing them and retrieving layers from
`CustomData` as needed. Similar changes have already been applied to
curves and point clouds (e9f82d3dc7ee, 410a6efb747f). Removing use of
the pointers generally makes code more obvious and more reusable.
Mesh data is now accessed with a C++ API (`Mesh::edges()` or
`Mesh::edges_for_write()`), and a C API (`BKE_mesh_edges(mesh)`).
The CoW changes this commit makes possible are described in T95845
and T95842, and started in D14139 and D14140. The change also simplifies
the ongoing mesh struct-of-array refactors from T95965.
**RNA/Python Access Performance**
Theoretically, accessing mesh elements with the RNA API may become
slower, since the layer needs to be found on every random access.
However, overhead is already high enough that this doesn't make a
noticible differenc, and performance is actually improved in some
cases. Random access can be up to 10% faster, but other situations
might be a bit slower. Generally using `foreach_get/set` are the best
way to improve performance. See the differential revision for more
discussion about Python performance.
Cycles has been updated to use raw pointers and the internal Blender
mesh types, mostly because there is no sense in having this overhead
when it's already compiled with Blender. In my tests this roughly
halves the Cycles mesh creation time (0.19s to 0.10s for a 1 million
face grid).
Differential Revision: https://developer.blender.org/D15488
|
|
|
|
This is a new implementation of the draw manager using modern
rendering practices and GPU driven culling.
This only ports features that are not considered deprecated or to be
removed.
The old DRW API is kept working along side this new one, and does not
interfeer with it. However this needed some more hacking inside the
draw_view_lib.glsl. At least the create info are well separated.
The reviewer might start by looking at `draw_pass_test.cc` to see the
API in usage.
Important files are `draw_pass.hh`, `draw_command.hh`,
`draw_command_shared.hh`.
In a nutshell (for a developper used to old DRW API):
- `DRWShadingGroups` are replaced by `Pass<T>::Sub`.
- Contrary to DRWShadingGroups, all commands recorded inside a pass or
sub-pass (even binds / push_constant / uniforms) will be executed in order.
- All memory is managed per object (except for Sub-Pass which are managed
by their parent pass) and not from draw manager pools. So passes "can"
potentially be recorded once and submitted multiple time (but this is
not really encouraged for now). The only implicit link is between resource
lifetime and `ResourceHandles`
- Sub passes can be any level deep.
- IMPORTANT: All state propagate from sub pass to subpass. There is no
state stack concept anymore. Ensure the correct render state is set before
drawing anything using `Pass::state_set()`.
- The drawcalls now needs a `ResourceHandle` instead of an `Object *`.
This is to remove any implicit dependency between `Pass` and `Manager`.
This was a huge problem in old implementation since the manager did not
know what to pull from the object. Now it is explicitly requested by the
engine.
- The pases need to be submitted to a `draw::Manager` instance which can
be retrieved using `DRW_manager_get()` (for now).
Internally:
- All object data are stored in contiguous storage buffers. Removing a lot
of complexity in the pass submission.
- Draw calls are sorted and visibility tested on GPU. Making more modern
culling and better instancing usage possible in the future.
- Unit Tests have been added for regression testing and avoid most API
breakage.
- `draw::View` now contains culling data for all objects in the scene
allowing caching for multiple views.
- Bounding box and sphere final setup is moved to GPU.
- Some global resources locations have been hardcoded to reduce complexity.
What is missing:
- ~~Workaround for lack of gl_BaseInstanceARB.~~ Done
- ~~Object Uniform Attributes.~~ Done (Not in this patch)
- Workaround for hardware supporting a maximum of 8 SSBO.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D15817
|
|
Wrong type of enum was used for factor mode in rna_nodetree.c
No functional change, thankfully the correct enum had the same value.
|
|
This patch implements the dilate/erode node for the realtime compositor.
Differential Revision: https://developer.blender.org/D15790
Reviewed By: Clement Foucault
|
|
Several visual tweaks to node links to make them overall fit in
better with the look of the node editor:
- Change the link thickness with the zoom level to a certain degree.
- Remove the fuzziness of the node link and its shadow/outline.
- The link outline color can now be made transparent.
- Add circles at the end of dragged links when connecting to sockets.
- Improve the banding of the color interpolation along the link.
- Adjust the spacing of dashes along straight node links.
Reviewed By: Pablo Vazquez, Hans Goudey
Differential Revision: http://developer.blender.org/D15036
|
|
This patch is a cleanup required before refactoring the view layer syncing
process {T73411}.
* Remove FIRSTBASE.
* Remove LASTBASE.
* Remove BASACT.
* Remove OBEDIT_FROM_WORKSPACE.
* Replace OBACT with BKE_view_layer_active_object.
* Replace OBEDIT_FROM_VIEW_LAYER with BKE_view_layer_edit_object.
Reviewed By: mont29
Maniphest Tasks: T73411
Differential Revision: https://developer.blender.org/D15799
|
|
The new factor allows to apply the current brush size to the
external stroke perimeter conversion done in draw mode.
|
|
This patch moves material indices from the mesh `MPoly` struct to a
generic integer attribute. The builtin material index was already
exposed in geometry nodes, but this makes it a "proper" attribute
accessible with Python and visible in the "Attributes" panel.
The goals of the refactor are code simplification and memory and
performance improvements, mainly because the attribute doesn't have
to be stored and processed if there are no materials. However, until
4.0, material indices will still be read and written in the old
format, meaning there may be a temporary increase in memory usage.
Further notes:
* Completely removing the `MPoly.mat_nr` after 4.0 may require
changes to DNA or introducing a new `MPoly` type.
* Geometry nodes regression tests didn't look at material indices,
so the change reveals a bug in the realize instances node that I fixed.
* Access to material indices from the RNA `MeshPolygon` type is slower
with this patch. The `material_index` attribute can be used instead.
* Cycles is changed to read from the attribute instead.
* BMesh isn't changed in this patch. Theoretically it could be though,
to save 2 bytes per face when less than two materials are used.
* Eventually we could use a 16 bit integer attribute type instead.
Ref T95967
Differential Revision: https://developer.blender.org/D15675
|
|
|
|
This patch is a response to T92588 and is implemented
as a Function/Shader node.
This node has support for Float, Vector and Color data types.
For Vector it supports uniform and non-uniform mixing.
For Color it now has the option to remove factor clamping.
It replaces the Mix RGB for Shader and Geometry node trees.
As discussed in T96219, this patch converts existing nodes
in .blend files. The old node is still available in the
Python API but hidden from the menus.
Reviewed By: HooglyBoogly, JacquesLucke, simonthommes, brecht
Maniphest Tasks: T92588
Differential Revision: https://developer.blender.org/D13749
|
|
When allocating new `CustomData` layers, often we do redundant
initialization of arrays. For example, it's common that values are
allocated, set to their default value, and then set to some other
value. This is wasteful, and it negates the benefits of optimizations
to the allocator like D15082. There are two reasons for this. The
first is array-of-structs storage that makes it annoying to initialize
values manually, and the second is confusing options in the Custom Data
API. This patch addresses the latter.
The `CustomData` "alloc type" options are rearranged. Now, besides
the options that use existing layers, there are two remaining:
* `CD_SET_DEFAULT` sets the default value.
* Usually zeroes, but for colors this is white (how it was before).
* Should be used when you add the layer but don't set all values.
* `CD_CONSTRUCT` refers to the "default construct" C++ term.
* Only necessary or defined for non-trivial types like vertex groups.
* Doesn't do anything for trivial types like `int` or `float3`.
* Should be used every other time, when all values will be set.
The attribute API's `AttributeInit` types are updated as well.
To update code, replace `CD_CALLOC` with `CD_SET_DEFAULT` and
`CD_DEFAULT` with `CD_CONSTRUCT`. This doesn't cause any functional
changes yet. Follow-up commits will change to avoid initializing
new layers where the correctness is clear.
Differential Revision: https://developer.blender.org/D15617
|
|
Those strings were at least partly disambiguated:
- Area
- Zone
- Measurement
- Ease
- BBone Ease In / Out
- Back
- Camera BG image depth
- GP interpolate sequence
- Edge Crease
- Theme
- Jitter
- Brush
- GPencil
- Lens distorsion compositing node
- Cineon color management
- Black
- Gamma
- White
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15791
|
|
The structures in rna_mesh.c all had a UI text which showed up in the
animation editors, except for MeshUVLoop.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15803
|
|
This new option converts the stroke to outline perimeter as soon as is drawn.
If no alternative material is set, the actual material is used.
The algorithm is similar to the new operator in D15664
Reviewed By: pepeland
Differential Revision: https://developer.blender.org/D15738
|
|
|
|
|
|
While converting types from callbacks isn't a bug, it's unlikely
we ever want to do this on purpose and can hide mistakes such as
silently converting floating point values to ints as happened
with Sequencer.frame_start.
|
|
Use matching int/float/boo types for RNA callbacks.
|
|
|
|
|
|
|
|
|
|
Those collections were so far mainly just tagged as fake user (even
though a few places in code already incremented usercount on them).
Since we now clear the fakeuser flag when linking/appending data, ensure
that these collections are preserved by making these usages regular ID
refcounting ones.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D15783
|
|
|
|
Since rBb100bdca25b1 the parent inverse was always reset in
ED_object_parent (also for just changing the parent type).
This does make sense (since there is no point keeping it when e.g
changing from "Bone" to "Object" or "Vertex" to "Object", for this to
really make sense it would have to be properly recalculated anyways
which does not happen afaict).
The reported issue was that setting the prop to the same value as it was
before (e.g. from "Object" to "Object") would still reset the parent
inverse which was really unexpected since from a user standpoint,
nothing has changed here.
So in case the value does not really change, we now just early out and
skip `ED_object_parent`.
Maniphest Tasks: T100599
Differential Revision: https://developer.blender.org/D15771
|
|
Reuse the subtraction, which simplifies adding assertions
and refactoring to remove the custom data pointers.
|
|
Ref D15710, this avoids unnecessary sequencer updates for some operations.
|
|
|