Age | Commit message (Collapse) | Author |
|
All tools planned for 2.91 now have icons, so this option can be
removed.
Reviewed By: dfelinto, Severin
Differential Revision: https://developer.blender.org/D9299
|
|
Caused by ad70d4b0956f5, assigning the matrix now
clears the flag that would reset it.
|
|
Follow up to d782bad62dc53373bb28811c0672da81924371d6
Also clear this for simulated events.
|
|
This was caused by unprotected drawing callbacks.
From 2.91, we now require that all python callbacks used for
drawing needs to be safeguarded by `GPU_bgl_end()` to end the
state tracking override.
|
|
"pt" is unecessarily cryptic, and the funciton name wasn't very clear.
|
|
In order to prevent the panel code from using the type after it is freed,
the field needs to be set to NULL. This needs to be done recursively
for subpanels as well as top-level panels.
|
|
Those two features are not directly related and one might be activated
in master earlier than the other.
WITH_PARTICLE_NODES was removed, because we continue the project
under the name "Geometry Nodes".
|
|
Being able to adjust the distance between fluid and obstacles comes in handy when trying to achieve a fluid motion over inclined obstacles.
Depending on the slope of such obstacles, already small adjustments of this value can help when particles stick to obstacle surfaces (i.e. make particles not stick to obstacles).
|
|
Changes in source/blender/makesrna only.
No functional change.
|
|
It got left out of {rBc04088fed1b8faea6b2928bb5e09ab3}.
No functional change.
|
|
With D8234 a new drawing method for UV/Image editor was introduced. For debugging
reasons we left the old drawing method in the code base. This patch will remove
the old drawing method.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D9011
|
|
|
|
The design for how we approach the "Everything Nodes" project
has changed. We will focus on a different part of the project initially.
While future me will likely refer back to some of the code I remove here,
there is no point in keeping this code around in master currently.
It would just confuse other developers working on the project.
This does not remove the simulation modifier and data block. Those are
just cleaned up, so that the boilerplate code can be reused in the future.
|
|
This adds a smooth deformation type to the boundary brush, which smooths
the boundary and has a regular falloff towards the inside of the mesh.
For smoothing, only vertices parallel to the boundary are taken into
account, creating this effect.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9204
|
|
|
|
Precision 'Mini' should only be available for liquids domains.
|
|
Corrects incorrect usages of the word 'loose' when 'lose' was required.
Differential Revision: https://developer.blender.org/D9243
Reviewed by Campbell Barton
|
|
Corrects 34 miscellaneous misspelled words.
Differential Revision: https://developer.blender.org/D9248
Reviewed by Campbell Barton
|
|
Corrects incorrect usages of the words 'then' and 'than'.
Differential Revision: https://developer.blender.org/D9246
Reviewed by Campbell Barton
|
|
Corrects incorrect usage of contraction for 'it is', when possessive 'its' was required.
Differential Revision: https://developer.blender.org/D9250
Reviewed by Campbell Barton
|
|
This modifier is the opposite of the recently added Mesh to Volume modifier.
It converts the "surface" of a volume into a mesh. The "surface" is defined
by a threshold value. All voxels with a density higher than the threshold
are considered to be inside the volume, while all others will be outside.
By default, the resolution of the generated mesh depends on the voxel
size of the volume grid. The resolution can be customized. It should be
noted that a lower resolution might not make this modifier faster. This
is because we have to downsample the openvdb grid, which isn't a cheap
operation.
Converting a mesh to a volume and then back to a mesh is possible,
but it does require two separate mesh objects for now.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D9141
|
|
A general refactor / fix commit that should clear out the issues that have been reported on external forces and moving effectors (e.g. T79537, T81660, T80088).
|
|
Basically first letter of (most) words is to be capitalized.
These settings (Noodle curving and Grid levels) had this wrong since
their first commit (2011 and 2020 respectively).
|
|
|
|
When using anchored stroke, the stroke operator was modifying the
coordinates on the "mouse" rna property by setting them to the original
position. Because of this, all the sculpt delta calculation was failing
and the delta for these brushes was set randomly (with a 0 vector) at
the beginning of the stroke.
There is now an extra property that uses the unmodified coordinates of
the mouse to calculate the delta. Now delta orientation works as expected
in all brushes and features that require brush tip orientation.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9183
|
|
This adds support for pen tilt in sculpt mode. For now, pen tilt is used
by tweaking the tilt strength property, which controls how much the pen
angle affects the sculpt normal. This is available in Draw, Draw Sharp,
Flatten, Fill, Scrape and Clay Strips brushes, but it can be enabled in
more tools later.
The purpose of this patch is to have a usable implementation of pen tilt
in a painting mode, so users can test and see in which hardware and
platforms this feature is supported and how well it works. If it works
ok, more tools and features that rely on pen tilt can be implemented,
like brushes that blend between two deformations depending on the angle.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8893
|
|
This will make "Reset to Default Value" work properly for grease
pencil modifiers. See T80164 for more information.
|
|
A lot of animator request an option to invert the filter of the dopesheet channels. This patch adds that invert filter option. This is not for Grease Pencil only, affect to all modes.
{F8983328}
Note: I have seen the new button has a rounded borders on the left. It would be better get rectangle shape, but not sure how to do it.
Reviewed By: campbellbarton, pepeland
Maniphest Tasks: T81676
Differential Revision: https://developer.blender.org/D9182
c68a2a
|
|
|
|
This way particles can be saved with the custom OpenVDB precision options that were introduced in the latest Mantaflow update.
|
|
Previously the softbody strength property was controlling the strength
of the constraints that pin all vertices to the original location. This
was causing problems when the forces were trying to deform the vertices
too much, like when using gravity or grab brushes.
Now softbody is implemented with plasticity, which creates constraints to
a separate coordinates array. These coordinates are deformed with the
simulation, and the plasticity parameter controls how much the
simulation moves the coordinates (plasticity 0), or the coordinates move
the simulation back to its previous position (plasticity 1).
This creates much better and predictable results and adding softbody
plasticity to the brushes can increase its control and the stability of
the simulation.
Reviewed By: sergey, zeddb
Differential Revision: https://developer.blender.org/D9187
|
|
|
|
This patch enables property search for all tabs in the property editor.
To make interaction faster, if the editor's current tab doesn't have a
result, the current tab changes to the next tab that has a match.
This patch implements basic code that only searches panels.
While we could run the existing "single tab" property search for every
tab, that would also do everything else related to the layout pass,
which would be less efficient, and maybe more complicated to maintain.
The search match status for every current tab of the property editor is
stored in a runtime bitfield and them displayed later by dimming icons
in the tab selector panel to the left. Using `BLI_bitmap` properly in
the runtime struct required moving it to `buttons_intern.h` and
adding a small API to access the search filter instead.
To make sure the editor isn't influenced by anything that happens while
building the layout for other tabs, most of the context is duplicated
and the new search is run in the duplicated editor.
Note that the tool settings tab works slightly different than the other
tabs, so I've disabled searching it for this commit. That would be a
relatively simple improvement, but would just require a bit of
refactoring of existing code.
Differential Revision: https://developer.blender.org/D8859
|
|
This adds arguments to `uiLayout.prop_tabs_enum` and the C equivalent
(`uiItemTabsEnumR_prop`) to gray out tabs based on a boolean array.
For property search in multiple tabs, we need a way to show which tabs
have a search result, but we still need to show which tab is active.
Differential Revision: https://developer.blender.org/D8858
|
|
This makes it easier to generate motion trail effect with EEVEE.
This just mimics the cycles option as described here:
https://docs.blender.org/manual/en/latest/render/cycles/render_settings/motion_blur.html
This fix T80070
|
|
The strength has a high impact on performance. With the previous
step and default one could easily and accidentally make Blender unusably
slow, because of a too high displacement strength.
|
|
Follow our code style guide by using C-comments for text descriptions.
|
|
The 0.1 limit was too large. The issue with making it smaller is that
one can easily crash blender by making it to small. To counteract this,
the step has been reduced as well.
A voxel size/amount of 0 disables the modifier.
|
|
Was failing because of a mismatch between RNA and DNA defaults on
`courant_target` property, removed RNA one (DNA came from initial value
defined in BKE's particle creation code, think it's best to keep that
one).
|
|
Differential Revision: https://developer.blender.org/D9148
|
|
No reasons to keep the new ID pointer as parameter here.
Part of T71219.
|
|
This modifier uses a 3D texture to displace a volume.
For now, this can only use the previously existing texture system,
because we do not have a better alternative yet. Still, the results
can be quite good and interesting. See D9075 for some examples.
Reviewers: brecht, simonthommes
Differential Revision: https://developer.blender.org/D9075
|
|
The overlay options in the image/uv editor is hidden in side panels and menus. Sometimes this panel is even hidden, while still useful.
The goal of this task is to introduce an overlay pop-over just like the overlay-popover of the 3d viewport.
Popover has
* UV Stretching (only available in the UV mode, when active object mode is a mesh and in OB_EDIT mode)
* Display As (only available in the UV mode, when active object mode is a mesh and in OB_EDIT mode)
* Show Modified (only available in the UV mode, when active object mode is a mesh and in OB_EDIT mode)
* Show UV Edges (including opacity slider; available UV, View, Paint, when active object mode is a mesh and in OB_EDIT mode)
* Udim tiles when no image is available.
Like the 3d viewport, there will be a editor toggle to enable/disable the overlays
For compatibility reasons the RNA properties are added to both the `SpaceImage.uv_editor` amd `SpaceImage.overlay`. On DNA level they are still stored in the SpaceImage. only new properties are added to the SpaceImageOverlay struct. During the next major release we could remove these options from `SpaceImage.uv_editor`. This should be noted in the Python section of release notes.
Reviewed By: Julian Eisel, Pablo Vazquez
Differential Revision: https://developer.blender.org/D8890
|
|
Particularly useful now that we can dynamically generate volume using
modifiers. Not exposed in the user interface currently, but it can be used
by add-ons that need to export an entire scene including volumes.
|
|
In the graph editor there is a panel that says "Active Keyframe" for
numerically editing a keyframe's values, but in the code there is no
concept of the "active keyframe." Since this is a useful concept to
have for some other features anyway, this commit adds an active
keyframe index value to FCurves. It also displays it with a theme
color for the active vertex (which didn't exist before) if the
FCurve is active.
The active keyframe in the graph editor is treated similarly to the
active vertex in the 3D view. It is the keyframe most recently selected
with a single click, and it is always selected.
For now, the only real functional change is that the active keyframe
appears in white and it should be more predictable which keyframe is
being edited in the sidebar panel.
Differential Revision: https://developer.blender.org/D7737
|
|
Avoid overwriting user-chosen `SACTION_SLIDERS` flag when switching the
Dope Sheet editor to Shape Key mode. The Shape Key mode now ignores the
flag, and always shows the sliders.
The obvious limitation is that you can't hide the sliders in the Shape
Key editor anymore
Reviewed By: looch, sybren
Differential Revision: https://developer.blender.org/D9121
|
|
- Density, interpolation and slicing options in Volume Object's
Viewport Display are now not aligned to each other as they are not
closely related.
- Changed the enum property for slicing ('Method') to a boolean
property 'Slice' and added a sub-panel for slicing options under
the 'Viewport Display' panel in Volume Object and Fluid for better
clarity.
- Renamed `axis_slice_method` to `use_slice` in the python API for
Volume Object and Fluid.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D9097
|
|
Because the active context is stored as a short in DNA it's better
to use short in the code surrounding it. Also adjusted a comment
that reflected an incorrect assumption.
|
|
This is first step of refactoring task T77580.
Next step will be breaking up files into smaller ones.
Reviewed By: sergey, brecht
Differential Revision: https://developer.blender.org/D8492
|
|
Remove word proxy from eSpaceSeq_Proxy_RenderSize members if proxy is
not used with that item. Otherwise this can be a bit confusing.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8861
|