| Age | Commit message (Collapse) | Author |
|---|
|
When introduced in {rB61050f75b13e} this was actually working (meaning
it checked the Outliner OB_RESTRICT_RENDER flag and skipped the object if
desired).
Behavior has since then been commented in rBae6e9401abb7 and apparently
refactored out in rB2917df21adc8.
If checked, it seemed to be working (objects marked non-renderable in
the Outliner were pruned from the export), however unchecking that
option did not include them in the export.
Now it changed - for the worse if you like - in rBa95f86359673 which
made it so if "Renderable Objects" only is checked, it will still export
objects invisible in renders. So since we now have the non-functional
option with a broken/misleading default, it is better to just remove it
entirely.
In fact it has been superseeded by the "Visible Objects" option (this
does the same thing: depsgraph is evaluated in render mode) and as a
second step (and to make this even clearer) a choice whether
Render or Viewport evaluation is used can be added (just like the USD
exporter has). When that choice is explicit, it's also clear which
visibility actually matters.
This is breaking API usage, should be in release notes.
ref. T89594
Maniphest Tasks: T89594
Differential Revision: https://developer.blender.org/D11808
|
|
This node creates a poly spline line in one of 2 modes:
- Line between two points
- Start Point, Direction, and Length
Both modes create splines with only start and endpoints.
A resample node can be used afterward to increase the point count.
Differential Revision: https://developer.blender.org/D11769
|
|
This patch adds a very simple node that explicitly converts a float to
an int. While this may seem redundant, it would offer 2 benefits to the
current requirement to use implicit float conversions:
1. It makes the node tree's intent more clear and self-documenting
(especially if changes in the future require integer inputs).
2. It eliminates undefined behavior in current/future nodes from float
inputs by guaranteeing that the input is an integer.
The node offers a variety of rounding techniques to make it more flexible.
Differential Revision: https://developer.blender.org/D11700
|
|
|
|
|
|
This adds a viewer node similar to the one in the compositor.
The icon in the headers of nodes is removed because it served
the same purpose and is not necessary anymore.
Node outputs can be connected to the active viewer using
ctrl+shift+LMB, just like in the compositor. Right now this collides
with the shortcut used in the node wrangler addon, which will
be changed separately.
As of now, the viewed geometry is only visible in the spreadsheet.
Viewport visualization will be added separately.
There are a couple of benefits of using a viewer node compared
to the old approach with the icon in the node header:
* Better support for nodes that have more than one geometry output.
* It's more consistent with the compositor.
* If attributes become decoupled from geometry in the future,
the viewer can have a separate input for the attribute to visualize.
* The viewer node could potentially have visualization settings.
* Allows to keep "visualization points" around by having multiple
viewer nodes.
* Less visual clutter in node headers.
Differential Revision: https://developer.blender.org/D11470
|
|
|
|
Also use doxy style function reference `#` prefix chars when
referencing identifiers.
|
|
Add a new transformation space choice for bone constraints, which
represent the local transformation of the target bone in the constraint
owner's local space.
The use case for this is transferring the local (i.e. excluding the
effect of parents) motion of one bone to another one, while ignoring
the difference between their rest pose orientations.
The new option replaces the following setup:
* A `child` bone of the `target`, rotated the same as `owner` in rest pose.
* A `sibling` bone of the `target`, positioned same as `child` in rest
pose and using Copy Transforms in World Space from `child`.
* The `owner` bone constraint uses Local Space of `sibling`.
(This analogy applies provided both bones use Local Location)
Differential Revision: https://developer.blender.org/D9493
|
|
This constraint can be naturally viewed as a prototype for a future
4x4 matrix math node (or subset thereof), since its basic semantics
already is matrix assignment. Thus it makes sense to add math options
to this constraint to increase flexibility in the meantime.
This patch adds support for several operations that would be useful:
- An option to remove shear in the incoming target matrix.
Shear is known to cause issues for various mathematical operations,
so an option to remove it at key points is useful.
Constraints based on Euler like Copy Rotation and Limit Rotation
already have always enabled shear removal built in, because their
math doesn't work correctly with shear.
In the future node system shear removal would be a separate node
(and currently Limit Rotation can be used as a Remove Shear constraint).
However removing shear from the result of the target space conversion
before mixing (similar to Copy Rotation) has to be built into
Copy Transforms itself as an option.
- More ways to combine the target and owner matrices.
Similar to multiple Inherit Scale modes for parenting, there are
multiple ways one may want to combine matrices based on context.
This implements 3 variants for each of the Before/After modes
(one of them already existing).
- Full implements regular matrix multiplication as the most basic
option. The downside is the risk of creating shear.
- Aligned emulates the 'anti-shear' Aligned Inherit Scale mode,
and basically uses Full for location, and Split for rotation/scale.
(This choice already existed.)
- Split Channels combines location, rotation and scale separately.
Looking at D7547 there is demand for Split Channels in some cases,
so I think it makes sense to include it in Copy Transforms too, so that
the Mix menu items can be identical for it and the Action constraint.
Differential Revision: https://developer.blender.org/D9469
|
|
his new modifier allows to generate weights base on:
* Angle of the stroke relative to object or world orientation. For example, if the value is 90, the maximum weights will be for vertical lines and minimum for horizontal lines.
* Distance to Target object. The distance calculated is normalized to get valid weights between 0 and 1.0.
The weights are created in an existing vertex group and the data can be replaced or mixed with the existing value to combine different weight effects. The minimum parameter, allows to define the minimum weight generated. This is useful to avoid very low weights.
The generated weights can be used in any modifier. For example, the angle weight value can be used to mimic FreeStyle Caligraphy modifier using the weight with the thickness modifier.
Also some modifier has been changed to inlude a new option to use the weights as factor of the effect.
As result of this change, the fading option has been removed from Thickness and Opacity modifiers because this can be done using the new modifier, it's not logic to repeat the same.
Reviewed By: mendio, filedescriptor
Differential Revision: https://developer.blender.org/D11604
|
|
Address initial feedback:
- Use checkboxes instead of radio buttons
- Hide snapping distance control from UI
- Tweak snapping line color - use selected strip color, 50% transparency. Similar to other editors
- Draw 2px thick line, since strip outline is also 2px thick
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D11759
|
|
When multiple File or Asset Browsers would load at once (e.g. when loading a
file with two File Browsers open) and they would load multiple directories or
.blend files (using the Recursions option in the File Browser or loading an
asset library with multiple .blends), often only one File/Asset Browser would
correctly load all files. Others would be incomplete or entirely empty. That
was because of a race condition, where the directories or .blend files would be
loaded concurrently and the first one that finished would cancel the other
ones. This again happened because they used the job system with the same
"owner", which by design makes all jobs with the same owner cancel as soon as
the first is finished.
Address this by making sure they have different owners. That is, not the scene
anymore, but the filelist the job belongs to. Doesn't make much sense to use
the scene as owner for scene-unrelated file loading anyway.
Steps to reproduce were:
* Open two File Browsers as regular editors.
* In the Display Settings popover, set "Recursions" to 2 or 3 levels.
* Navigate to a directory with plenty of subdirectories in both File Browsers.
* Save the file.
* Reload the file, one of the File Browsers likely has an incomplete file list.
Alternatively, use Asset Browsers and open an asset library containing multiple
.blends.
|
|
|
|
This node has two modes: the first mode computes a circle from three
locations and a resolution. The second takes radius and resolution.
The first mode also outputs the center of the computed circle as
a vector.
Differential Revision: https://developer.blender.org/D11650
|
|
Copy-paste mistake in rB4e9817a4fb29 (copied from fmodifier).
Maniphest Tasks: T89535
Differential Revision: https://developer.blender.org/D11753
|
|
|
|
Creates a Curve with 1 Bezier Spline from four positions (start,
start handle, end handle, end) and a resolution. The handles are
aligned and mirrored automatically. An "Offset" mode is also included
to allow specifying the handles relative to the control points.
The default settings recreate the existing default Bezier Curve in the
3D viewport add menu.
Differential Revision: https://developer.blender.org/D11648
|
|
Change snapping behavior to snap strip edges when they are close to snap point.
Default behavior is, that each transformed strip is snapped to any other strip.
Implement snapping controls in sequencer tool settings. These controls include:
- Snapping on/off
- Ability to snap to playhead and strip hold offset points
- Filter snap points by excluding sound or muted strips
- Control snapping distance
Snapping controls are placed in timeline header similar to 3D viewport
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11646
|
|
`UILayout.operator_menu_enum()` now returns the operator properties, just like
`UILayout.operator()`. This makes it possible to set options for the operator
displayed in the menu. In C it can be done through the new
`uiItemMenuEnumFullO()` or `uiItemMenuEnumFullO_ptr()`.
It's reasonable to have this, probably just a small thing never bothered to
add. D10912 could use it, the following comment can be addressed now too:
https://developer.blender.org/diffusion/B/browse/master/source/blender/editors/space_nla/nla_buttons.c$583-586
|
|
Mask value works just like transparency mask.
You are able to select intersection lines inside a
collection or, between collections.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D11309
|
|
see comment in https://developer.blender.org/rB841df831e89dfc4011c323203c2efb8265dc1878
|
|
|
|
Passing `emboss=False`set `UI_EMBOSS_NONE` in the layout, which
completely disables button background colors for things like animation
state. This commit changes that to `UI_EMBOSS_NONE_OR_STATUS`,
which effectively restores the behavior to what it was prior to the
addition of that flag, with the added option to completely disable
the status emboss with `UI_EMBOSS_NONE`.
|
|
This adds a new Attributes panel in the mesh properties editor.
It shows a list of all the generic attributes on the mesh.
In the future, we want to show built-in and other attributes in the
list as well. Related technical design tasks: T88460, T89054.
There is also a new simple name collision check that warns the user
when there are multiple attributes with the same name. This can be
problematic when the attribute is supposed to be used in geometry
nodes or during rendering.
Differential Revision: https://developer.blender.org/D11276
|
|
This was a stupid mistake in my original commit that added this item.
While this is an API breakage, the name is simply wrong, and it is only
6 months old, and slightly niche.
Differential Revision: https://developer.blender.org/D11701
|
|
This patch adds a function where you can specify occlusion effectiveness from 0 to 255 layers per face for a given mesh material.
Reviewed By: Sebastian Parborg (zeddb)
Ref D11308
|
|
This option allow users to see the view layer in context to the
others. It is particularly useful to see which view layers have which
collections enabled, and their render settings (holdout, ...).
This option is off by default.
Differential Revision: https://developer.blender.org/D11708
|
|
|
|
|
|
Start the tooltip with a verb instead of a gerund, other small changes
for consistency and readability.
|
|
|
|
|
|
|
|
|
|
string.c still needs cleanup, but I will leave to the original
author of the latest chagnes to do it since it needs
some tags to skip formatting.
|
|
User can specify filtering options inside line art modifier,
like inverting selection and including face mark region border.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D11307
|
|
This patch adds a left aligned sidebar to the spreadsheet editor. This
Sidebar can be used to navigate the geometry component types and
attribute domains. It also provides a quick overview of domain sizes.
It replaces the two dropdowns in the regions header.
Next step will be to add the domain cycling shortcut
using the CTRL + mouse wheel.
Reviewer: Dalai Felinto (dfelinto), Julian Eisel (Severin),
Hans Goudey (HooglyBoogly).
Differential Revision: https://developer.blender.org/D11046
|
|
This patch includes: Floating edge type support,
Special chaining option for floating edge,
Chaining option for reducing jagged edges when floating
edges are involved.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D11306
|
|
Differential Revision: https://developer.blender.org/D11680
|
|
Avoid computationally expensive copying operations
when only some settings have been modified.
This is done by adding support for updating parameters
without tagging for copy-on-write.
Currently only mesh data blocks are supported,
other data-blocks can be added individually.
This prepares for changing values such as edit-mesh auto-smooth angle
in edit-mode without duplicating all mesh-data.
The benefit will only be seen when the user interface no longer tags
all ID's for copy on write updates.
ID_RECALC_GEOMETRY_ALL_MODES has been added to support situations
where non edit-mode geometry is modified in edit-mode.
While this isn't something user are likely to do,
Python scripts may change the underlying mesh.
Reviewed By: sergey
Ref D11377
|
|
Very stupid typo in override apply code on GP modifiers (typical
copy/paste mistake from original modifiers code).
@jbakker this should be back-ported to 2.93LTS.
|
|
|
|
Previously the smooth shading of the voxel remesher was controlled by a
mesh property. With this change, the output will try to match the
current shading of the object. This only takes into consideration the
shading mode of the first polygon of the model, but it is probably what
most users expect as it works as intended with the shade smooth/flat
object mode options.
Reviewed By: JulienKaspar, JacquesLucke
Differential Revision: https://developer.blender.org/D11626
|
|
|
|
This patch fixes many minor spelling mistakes, all in comments or
console output. Mostly contractions like can't, won't, don't, its/it's,
etc.
Differential Revision: https://developer.blender.org/D11663
Reviewed by Harley Acheson
|
|
No functional changes. Just makes it clear this is not an immediate
update, and will make an upcoming change more localized.
|
|
|
|
This patch adds support for filtering rows based on rules and values.
Filters will work for any attribute data source, they are a property
of the spreadsheet rather than of the attribute system. The properties
displayed in the row filter can depend on data type of the currently
visible column with that name. If the name is no longer visible, the
row filter filter is grayed out, but it will remember the value until
a column with its name is visible again.
Note: The comments in `screen.c` combined with tagging the sidebar
for redraw after the main region point to a lack of understanding
or technical debt, that is a point to improve in the future.
**Future Improvements**
* T89272: A search menu for visible columns when adding a new filter.
* T89273: Possibly a "Range" operation.
Differential Revision: https://developer.blender.org/D10959
|
|
This code was disabled in 2.8 and all other associated code/comments
have been removed/cleared. These rna properties have been replaced with
`seq_prev_type`
|
