Age | Commit message (Collapse) | Author |
|
This is similar to e032ca2e25bf2e305b66 which removed the
callback for volumes. Now that we have geometry sets, there is
no need to define a callback for every data type, and this wasn't
used. Procedural curves/hair editing will use nodes rather than new
modifier types anyway.
|
|
I've seen requests to remove this or complaints about this error message
quite frequently. In lots of production files it's just always going off.
It's not an actionable warning, and since "slow" is relative, it isn't
always even correct.
Differential Revision: https://developer.blender.org/D12694
|
|
Also use doxy style function reference `#` prefix chars when
referencing identifiers.
|
|
This allows us to remove a callback from the modifier type info struct.
In the future the these modifiers might just be replaced by nodes
internally anyway, but in the meantime it's nice to unify the handling
of evaluated geometry a bit.
Differential Revision: https://developer.blender.org/D11080
|
|
Since the initial merge of the geometry nodes project, the modifyPointCloud
function already was already modifying a geometry set. The function wasn't
renamed back then, because then the merge would have touched many
more files.
Ref T83357.
|
|
|
|
For Customdata layer copying, interpolation with the mixfactor is only
done for certain mix modes, now set the UI inactive if the mixfactor is
not in use.
Namely, the modes are the "Above / Below Threshold" which are only used
for flags, colors and normals and mixing is not supported in these cases.
Spotted while looking into T81914.
Differential Revision: https://developer.blender.org/D9327
|
|
Without this, there was no way of finding out which object, modifier
combination caused the error, making the logs not very useful
for debugging.
|
|
Every label string in uiItem* calls needs an IFACE_ call.
|
|
Note that possibility to pass the new ID pointer as parameter was kept,
as this is needed for some rather specific cases (like in depsgraph/COW,
when copying into already allocated memory).
Part of T71219.
|
|
This removes `foreachObjectLink` from `ModifierTypeInfo`, `GpencilModifierTypeInfo`
and `ShaderFxTypeInfo`. There is no need to have both, `foreachObjectLink` and `foreachIDLink`.
There is not code that actually depends on `foreachObjectLink`.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D9078
|
|
This reduces the number of places that have to be modified
when a new modifier is added.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D9000
|
|
With this change `outliner_draw.c` does not have to be
edited anymore when a new modifier is added.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D8998
|
|
For modifier shortcuts we added a "custom_data" field to panels.
This commit uses the same system for accessing the list data that
corresponds to each panel. This way the context is only used once
and the modifier for each panel can be accessed more easily later.
This ends up being mostly a cleanup commit with a few small changes
in interface_panel.c. The large changes in the UI functions are due
to the fact that the panel custom data is now passed around as a
single pointer instead of being created again for every panel.
The list_index variable in Panel.runtime is removed as it's now
unnecessary.
Differential Revision: https://developer.blender.org/D8559
|
|
|
|
|
|
This is part of a greater blenloader decentralization effort (T76372).
For modifiers the goal is that fewer files have to be modified when
a new modifier is added.
This patch just adds the `blendWrite` and `blendRead` callbacks to
`ModifierTypeInfo` but does not change any other code yet. In the next
steps, modifier specific code will be moved from `writefile.c` and
`readfile.c` into their corresponding `MOD_*` files.
|
|
This patch implements the list panel system D7490 for modifiers.
It also moves modifier drawing to a callback in ModifierTypeInfo
in line with the extensible architecture refactoring goal T75724.
This adds a PanelRegister callback and utilities for registering
panels and subpanels. It also adds the callbacks for expansion saving
and drag and drop reordering described in D7490.
These utilities, callbacks, and other common UI elements shared
between modifiers live in MOD_ui_common.c.
Because modifier buttons are now in panels, we can make use of
subpanels for organization. The UI layouts also use the single
column layout style consistently used elsewhere in Blender.
Additionally, the mode-setting buttons are aligned and ordered
consistently with the outliner.
However, the large number of UI changes in this patch may mean
that additional polishing is required in master.
Thanks to William Reynish (@billreynish) who did a fair amount of the
layout work and to Julian Eisel (@Severin) for consistent help.
Differential Revision: https://developer.blender.org/D7498
|
|
|
|
|
|
Differential Revision: https://developer.blender.org/D7546
|
|
There is no user visible difference in standard builds, as there are no
volume modifiers yet. When using WITH_NEW_OBJECT_TYPES some deform only
modifiers are now available for hair and pointcloud objects.
Differential Revision: https://developer.blender.org/D7141
|
|
|
|
|
|
Note that `BKE_library.h`/`library.c` were renamed to
`BKE_lib_id.h`/`lib_id.c` to avoid having a too generic name here.
Part of T72604.
|
|
|
|
This is a continuation of rB39f005eae8eed8b939579aff8c9a05a4f50e5e38
Now all the fields where we check for object type in RNA (like
rna_Curve_object_poll) will have a safe guard for when this isn't the
case. For example when loading files that has missing object libraries
and all missing objects are replaced with empties (placeholders).
Reviewed By: Brecht
Differential Revision: http://developer.blender.org/D5425
|
|
T68035 by @luzpaz
|
|
Also remove duplicate comments in headers.
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
This was wrong and violating design to force modifiers to query
evaluated objects and IDs. It is up to the caller to make sure
the object is properly evaluatable.
Effectively, reverting changes from de491abf9962 (and possibly
other related changes).
|
|
|
|
The general idea of this change is to have a runtime data pointer
in the ModifierData, so it can be preserved through copy-on-write
updates by the dependency graph.
This is where subdivision surface modifier can store its topology
cache, so it is not getting trashed on every copy-on-write which
is happening when moving a vertex.
Similar mechanism should be used by multiresolution, dynamic paint
and some other modifiers which cache evaluated data.
This fixes T61746.
Thing to keep in mind, that there are more reports about slow
subdivision surface in the tracker, but that boils down to the
fact that those have a lot of extraordinary vertices, and hence
a lot slower to evaluated topology.
Other thing is, this speeds up oeprations which doesn't change
topology (i.e. moving vertices).
Reviewers: brecht
Reviewed By: brecht
Maniphest Tasks: T61746
Differential Revision: https://developer.blender.org/D4541
|
|
Stupid mistake in previous 'fixing' commit, I put the call computing
extra required source cddata masks into the callback used to get
destination (current object) cddata masks...
|
|
Source (i.e. other) mesh should not be modified in any case in modifier
evaluation case (this is forbidden by design and can lead to all kind of
threaded locks and crashes), and doing so even in operator case was
never a good idea either.
Now that we can specifically request needed data (poly and/or loop
normals) from evaluation code, we can finally get rid of those
computations inside data transfer/mesh remapping area.
This is hopefully the last remaining bit of this 'bad crashing code' in
datatransfer area.
|
|
We already have different storages for cddata of verts, edges etc.,
'simply' do the same for the mask flags we use all around Blender code
to request some data, or limit some operation to some layers, etc.
Reason we need this is that some cddata types (like Normals) are
actually shared between verts/polys/loops, and we don’t want to generate
clnors everytime we request vnors!
As a side note, this also does final fix to T59338, which was the
trigger for this patch (need to request computed loop normals for
another mesh than evaluated one).
Reviewers: brecht, campbellbarton, sergey
Differential Revision: https://developer.blender.org/D4407
|
|
For some reason forgot to handle half of modifier files...
|
|
While \file doesn't need an argument, it can't have another doxy
command after it.
|
|
This is what modifiers are to use to indicate that they depend
on a transformation of the object itself.
Currently should be no functional changes, but in the future
this will allow to easily change transform operation depending
on whether there is a simulation associated with the object.
|
|
Move \ingroup onto same line to be more compact and
make it clear the file is in the group.
|
|
Turns out most of our 'local working copy' cases can use same set of
flags.
Note that this commit adds LIB_ID_COPY_CACHES to all our local meshes
copying, however this is no-op since that flag is unused during mesh
copying... We may want to add another set of flags without that one at
some point, but for now it would not be useful imho.
|
|
This was used in *one* place only... much better to have a dedicated
helper for that kind of things. ;)
|
|
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
|
|
Fix T58237: Exporters: Curve Modifier not applied when "apply modifiers" are selected.
Fix T58856: Python: "to_mesh" broken in 2.8.
...And many other cases... ;)
Thing is, we need target IDs to always be evaluated ones (at least I
cannot see any case where having orig ones is desired effect here).
Depsgraph/Cow system ensures us that when modifiers are evaluated by it,
but they can also be called outside of this context, e.g. when doing
binding, or object conversion...
So we need to ensure in modifiers code that we actually are always
working with eval data for those targets.
Note that I did not touch to physics modifiers, those are a bit touchy
and rather not 'fix' something there until proven broken!
|
|
Move all mask-related fields from Object and OperationDepsNode
to Object_Runtime and IDDepsNode. Auto-apply DEG_TAG_GEOMETRY
if the mask changes after DEG rebuild. Update DEG API and all
code that uses it.
This fixes "source mesh data is not ready" errors from Data
Transfer modifier when parameters are changed in the UI after
the recent mesh_get_eval_final fix.
Reviewers: sergey
Differential Revision: https://developer.blender.org/D4025
|
|
It can't be used during modifier evaluation, and rna
enum code should access the evaluated objects.
|
|
When a modifier depends on some other object's position, then it also
depends in its own position, this has to be also told to depsgraph.
Fixes several modifiers where moving target would update the modifier,
while moving modified object itself would not.
|
|
Was only used by subsurf in the past years, it is unlikely
other modifiers will every need this any time soon.
|
|
|
|
There were a few copies of the same few lines in depsgraph build code,
so it seems to be logical to introduce a function for it, and make it
accessible from C code for completeness.
As an example, register the mask needs of the Data Transfer modifier.
|