| Age | Commit message (Collapse) | Author |
|---|
|
projectors
Make this clear in property UI descriptions and deactivate aspect &
scale fields if no camera projectors are present.
ref T86268
Maniphest Tasks: T86268
Differential Revision: https://developer.blender.org/D10634
|
|
|
|
provide a UVMap
This was reported for remesh and skin modifiers.
These dont preserve UV layers (and probably cannot in a reasonable way),
so instead let the UV Project modifier create a new (equally named) UV
layer (as was suggested by @brecht in T59376).
Maniphest Tasks: T59376
Differential Revision: https://developer.blender.org/D10617
|
|
Since the initial merge of the geometry nodes project, the modifyPointCloud
function already was already modifying a geometry set. The function wasn't
renamed back then, because then the merge would have touched many
more files.
Ref T83357.
|
|
This removes `foreachObjectLink` from `ModifierTypeInfo`, `GpencilModifierTypeInfo`
and `ShaderFxTypeInfo`. There is no need to have both, `foreachObjectLink` and `foreachIDLink`.
There is not code that actually depends on `foreachObjectLink`.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D9078
|
|
As noted in T80164, there are quite a few area of Blender where the
"Reset to Default Value" operator in button context menus doesn't work.
Modifiers are one of them, because the DNA defaults system was never
set up for them.
Additionally, this should make modifier versioning easier. Whenever a
new field is added it should be automatically initialized to the
default value.
I had to make some ordering changes in the following modifiers to work
around an error with `-Wsign-conversion` in the macros:
- Solidify Modifier
- Corrective Smooth Modifier
- Screw Modifier
Some modifiers are special cases and are skipped in this commit:
- Data Transfer Modifier
- Cloth Modifier
- Fluid Modifier
- Softbody Modifier
Differential Revision: https://developer.blender.org/D8747
|
|
This reduces the number of places that have to be modified
when a new modifier is added.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D9000
|
|
With this change `outliner_draw.c` does not have to be
edited anymore when a new modifier is added.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D8998
|
|
For modifier shortcuts we added a "custom_data" field to panels.
This commit uses the same system for accessing the list data that
corresponds to each panel. This way the context is only used once
and the modifier for each panel can be accessed more easily later.
This ends up being mostly a cleanup commit with a few small changes
in interface_panel.c. The large changes in the UI functions are due
to the fact that the panel custom data is now passed around as a
single pointer instead of being created again for every panel.
The list_index variable in Panel.runtime is removed as it's now
unnecessary.
Differential Revision: https://developer.blender.org/D8559
|
|
|
|
This is part of a greater blenloader decentralization effort (T76372).
For modifiers the goal is that fewer files have to be modified when
a new modifier is added.
This patch just adds the `blendWrite` and `blendRead` callbacks to
`ModifierTypeInfo` but does not change any other code yet. In the next
steps, modifier specific code will be moved from `writefile.c` and
`readfile.c` into their corresponding `MOD_*` files.
|
|
This patch implements the list panel system D7490 for modifiers.
It also moves modifier drawing to a callback in ModifierTypeInfo
in line with the extensible architecture refactoring goal T75724.
This adds a PanelRegister callback and utilities for registering
panels and subpanels. It also adds the callbacks for expansion saving
and drag and drop reordering described in D7490.
These utilities, callbacks, and other common UI elements shared
between modifiers live in MOD_ui_common.c.
Because modifier buttons are now in panels, we can make use of
subpanels for organization. The UI layouts also use the single
column layout style consistently used elsewhere in Blender.
Additionally, the mode-setting buttons are aligned and ordered
consistently with the outliner.
However, the large number of UI changes in this patch may mean
that additional polishing is required in master.
Thanks to William Reynish (@billreynish) who did a fair amount of the
layout work and to Julian Eisel (@Severin) for consistent help.
Differential Revision: https://developer.blender.org/D7498
|
|
|
|
|
|
There is no user visible difference in standard builds, as there are no
volume modifiers yet. When using WITH_NEW_OBJECT_TYPES some deform only
modifiers are now available for hair and pointcloud objects.
Differential Revision: https://developer.blender.org/D7141
|
|
|
|
Note that `BKE_library.h`/`library.c` were renamed to
`BKE_lib_id.h`/`lib_id.c` to avoid having a too generic name here.
Part of T72604.
|
|
|
|
When the result isn't used, prefer post increment/decrement
(already used nearly everywhere in Blender).
|
|
This also splits vertex access and allocation so it's possible
to copy coordinates into an existing array without allocating it.
|
|
|
|
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
This was wrong and violating design to force modifiers to query
evaluated objects and IDs. It is up to the caller to make sure
the object is properly evaluatable.
Effectively, reverting changes from de491abf9962 (and possibly
other related changes).
|
|
|
|
The general idea of this change is to have a runtime data pointer
in the ModifierData, so it can be preserved through copy-on-write
updates by the dependency graph.
This is where subdivision surface modifier can store its topology
cache, so it is not getting trashed on every copy-on-write which
is happening when moving a vertex.
Similar mechanism should be used by multiresolution, dynamic paint
and some other modifiers which cache evaluated data.
This fixes T61746.
Thing to keep in mind, that there are more reports about slow
subdivision surface in the tracker, but that boils down to the
fact that those have a lot of extraordinary vertices, and hence
a lot slower to evaluated topology.
Other thing is, this speeds up oeprations which doesn't change
topology (i.e. moving vertices).
Reviewers: brecht
Reviewed By: brecht
Maniphest Tasks: T61746
Differential Revision: https://developer.blender.org/D4541
|
|
We already have different storages for cddata of verts, edges etc.,
'simply' do the same for the mask flags we use all around Blender code
to request some data, or limit some operation to some layers, etc.
Reason we need this is that some cddata types (like Normals) are
actually shared between verts/polys/loops, and we don’t want to generate
clnors everytime we request vnors!
As a side note, this also does final fix to T59338, which was the
trigger for this patch (need to request computed loop normals for
another mesh than evaluated one).
Reviewers: brecht, campbellbarton, sergey
Differential Revision: https://developer.blender.org/D4407
|
|
BLI should always comes first, before DNA, BKE etc. And
`BLI_utildefines.h` should come before any other BLI (since it's some
sort of system include really, among other things...).
Thisi should help to reduce the noise in patches when adding stuff
like uint64_t members to DNA structs... ;)
|
|
While \file doesn't need an argument, it can't have another doxy
command after it.
|
|
This is what modifiers are to use to indicate that they depend
on a transformation of the object itself.
Currently should be no functional changes, but in the future
this will allow to easily change transform operation depending
on whether there is a simulation associated with the object.
|
|
Move \ingroup onto same line to be more compact and
make it clear the file is in the group.
|
|
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
|
|
|
|
Fix T58237: Exporters: Curve Modifier not applied when "apply modifiers" are selected.
Fix T58856: Python: "to_mesh" broken in 2.8.
...And many other cases... ;)
Thing is, we need target IDs to always be evaluated ones (at least I
cannot see any case where having orig ones is desired effect here).
Depsgraph/Cow system ensures us that when modifiers are evaluated by it,
but they can also be called outside of this context, e.g. when doing
binding, or object conversion...
So we need to ensure in modifiers code that we actually are always
working with eval data for those targets.
Note that I did not touch to physics modifiers, those are a bit touchy
and rather not 'fix' something there until proven broken!
|
|
When a modifier depends on some other object's position, then it also
depends in its own position, this has to be also told to depsgraph.
Fixes several modifiers where moving target would update the modifier,
while moving modified object itself would not.
|
|
Was only used by subsurf in the past years, it is unlikely
other modifiers will every need this any time soon.
|
|
|
|
|
|
|
|
Differential Revision: https://developer.blender.org/D3438
|
|
|
|
|
|
Reviewers: sybren
Tags: #bf_blender_2.8
Differential Revision: https://developer.blender.org/D3316
|
|
Conflicts:
source/blender/modifiers/intern/MOD_dynamicpaint.c
source/blender/modifiers/intern/MOD_uvproject.c
|
|
User count of IDs is handled by higher-level, generic function,
low-level copydata functions *MUST NOT* touch them anymore, ever!
|
|
|
|
This also changes signature of modifier copy callback, first (source)
parameter is now a const, which is saner anyway!
|
|
The contents of the ModifierEvalContext struct are constant while iterating
over the modifier stack. The struct thus should be only created once, outside
any loop over the modifiers.
|
|
Makes the follow changes:
- Add new `deform*` and `apply*` function pointers to `ModifierTypeInfo` that take `Mesh`, and rename the old functions to indicate that they take `DerivedMesh`. These new functions are currently set to `NULL` for all modifiers.
- Add wrapper `modifier_deform*` and `modifier_apply*` functions in two variants: one that works with `Mesh` and the other which works with `DerivedMesh` that is named with `*_DM_depercated`. These functions check which type of data the modifier supports and converts if necessary
- Update the rest of Blender to be aware and make use of these new functions
The goal of these changes is to make it possible to port to using `Mesh` incrementally without ever needing to enter into a state where modifiers don't work. After everything has been ported over the old functions and wrappers could be removed.
Reviewers: campbellbarton, sergey, mont29
Subscribers: sybren
Tags: #bf_blender_2.8
Differential Revision: https://developer.blender.org/D3155
|
|
|
