| Age | Commit message (Collapse) | Author |
|---|
|
This patch exposes the Cycles Alembic Procedural through the MeshSequenceCache
modifier in order to use and test it from Blender.
To enable it, one has to switch the render feature set to experimental and
activate the Procedural in the modifier. An Alembic Procedural is then
created for each CacheFile from Blender set to use the Procedural, and each
Blender object having a MeshSequenceCache modifier is added to list of objects
of the right procedural.
The procedural's parameters derive from the CacheFile's properties which are
already exposed in the UI through the modifier, although more Cycles specific
options might be added in the future.
As there is currently no cache controls and since we load all the data at the
beginning of the render session, the procedural is only available during
viewport renders at the moment. When an Alembic procedural is rendered, data
from the archive are not read on the Blender side.
If a Cycles render is not active and the CacheFile is set to use the Cycles Procedural,
bounding boxes are used to display the objects in the scene as a signal that the
objects are not processed by Blender anymore. This is standard in other DCCs.
However this does not reduce the memory usage from Blender as the Alembic data
was already loaded either during an import or during a .blend file read.
This is mostly a hack to test the Cycles Alembic procedural until we have a
better Blender side mechanism for letting renderers load their own geometry,
which will be based on import and export settings on Collections (T68933).
Ref T79174, D3089
Reviewed By: brecht, sybren
Maniphest Tasks: T79174
Differential Revision: https://developer.blender.org/D10197
|
|
|
|
This allows us to remove a callback from the modifier type info struct.
In the future the these modifiers might just be replaced by nodes
internally anyway, but in the meantime it's nice to unify the handling
of evaluated geometry a bit.
Differential Revision: https://developer.blender.org/D11080
|
|
Partially reverts 2250b5cefee7.
Removing the user count and fake user count icons was controversial (which was
expected) and there are a few further changes needed, that won't make it in
time for the release, see D9946.
While there is a design to bring back the user count and fake user indicators,
a new design idea was proposed that the UI team wants to follow. This came too
late for the 2.92 release, the new design is targeted at the 2.93 release now.
Meanwhile, UI team decision was to simply revert the design changes.
The new design is being worked on in https://developer.blender.org/T84669.
Note that this commit does not revert some internal changes done in
2250b5cefee7. Namely the introduction of `ed_util_ops.c` and data-block
operators in there. These will still be needed in the new design.
|
|
The previous design is rather old and has a couple of problems:
* Scalability: The current solution of adding little icon buttons next to the
data-block name field doesn't scale well. It only works if there's a small
number of operations. We need to be able to place more items there for better
data-block management. Especially with the introduction of library overrides.
* Discoverability: It's not obvious what some of the icons do. They appear and
disappear, but it's not obvious why some are available at times and others
not.
* Unclear Status: Currently their library status (linked, indirectly linked,
broken link, library override) isn't really clear.
* Unusual behavior: Some of the icon buttons allow Shift or Ctrl clicking to
invoke alternative behaviors. This is not a usual pattern in Blender.
This patch does the following changes:
* Adds a menu to the right of the name button to access all kinds of operations
(create, delete, unlink, user management, library overrides, etc).
* Make good use of the "disabled hint" for tooltips, to explain why buttons are
disabled. The UI team wants to establish this as a good practise.
* Use superimposed icons for duplicate and unlink, rather than extra buttons
(uses less space, looks less distracting and is a nice + consistent design
language).
* Remove fake user and user count button, they are available from the menu now.
* Support tooltips for superimposed icons (committed mouse hover feedback to
master already).
* Slightly increase size of the name button - it was already a bit small
before, and the move from real buttons to superimposed icons reduces usable
space for the name itself.
* More clearly differentiate between duplicate and creating a new data-block.
The latter is only available in the menu.
* Display library status icon on the left (linked, missing library, overridden,
asset)
* Disables "Make Single User" button - in review we weren't sure if there are
good use-cases for it, so better to see if we can remove it.
Note that I do expect some aspects of this design to change still. I think some
changes are problematic, but others disagreed. I will open a feedback thread on
devtalk to see what others think.
Differential Revision: https://developer.blender.org/D8554
Reviewed by: Bastien Montagne
Design discussed and agreed on with the UI team, also see T79959.
|
|
Since the initial merge of the geometry nodes project, the modifyPointCloud
function already was already modifying a geometry set. The function wasn't
renamed back then, because then the merge would have touched many
more files.
Ref T83357.
|
|
|
|
|
|
This removes `foreachObjectLink` from `ModifierTypeInfo`, `GpencilModifierTypeInfo`
and `ShaderFxTypeInfo`. There is no need to have both, `foreachObjectLink` and `foreachIDLink`.
There is not code that actually depends on `foreachObjectLink`.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D9078
|
|
As noted in T80164, there are quite a few area of Blender where the
"Reset to Default Value" operator in button context menus doesn't work.
Modifiers are one of them, because the DNA defaults system was never
set up for them.
Additionally, this should make modifier versioning easier. Whenever a
new field is added it should be automatically initialized to the
default value.
I had to make some ordering changes in the following modifiers to work
around an error with `-Wsign-conversion` in the macros:
- Solidify Modifier
- Corrective Smooth Modifier
- Screw Modifier
Some modifiers are special cases and are skipped in this commit:
- Data Transfer Modifier
- Cloth Modifier
- Fluid Modifier
- Softbody Modifier
Differential Revision: https://developer.blender.org/D8747
|
|
This reduces the number of places that have to be modified
when a new modifier is added.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D9000
|
|
With this change `outliner_draw.c` does not have to be
edited anymore when a new modifier is added.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D8998
|
|
For modifier shortcuts we added a "custom_data" field to panels.
This commit uses the same system for accessing the list data that
corresponds to each panel. This way the context is only used once
and the modifier for each panel can be accessed more easily later.
This ends up being mostly a cleanup commit with a few small changes
in interface_panel.c. The large changes in the UI functions are due
to the fact that the panel custom data is now passed around as a
single pointer instead of being created again for every panel.
The list_index variable in Panel.runtime is removed as it's now
unnecessary.
Differential Revision: https://developer.blender.org/D8559
|
|
These changes are smaller, made based on feedback and a pass on all
the layouts for clarity and consistency. The Multires modifier UI will
be addressed in a separate patch. Here is an overview of the changes:
Renaming Options:
- Build: "Start" -> "Start Frame"
- Curve: "From Radius" -> "Size from Radius"
- Screw: "Calc Order" -> "Calculate Order"
- Displace, Warp, Wave: "Texture Coordinates Object" -> "Object"
Move Mode Toggle to Top & Expand:
- Bevel, Boolean, Normal Edit, Subdivision
Use Columns for Tighter Spacing:
- Displace, Explode, Ocean, Particle Instance, Remesh, Shrinkwrap,
Solidify, Warp, Weighted Normal, Wave
Misc:
- Bevel: Set inactive properties for vertex bevel
- Mesh Sequence Cache: Remove box for cache file
- Skin: Don't align "Mark Loose" and "Clear Loose"
- Array: Expand relative offset subpanel by default
- Array: Move start cap, end cap to a new subpanel
- Bevel: Move width type above width
Differential Revision: https://developer.blender.org/D8115
|
|
|
|
This is part of a greater blenloader decentralization effort (T76372).
For modifiers the goal is that fewer files have to be modified when
a new modifier is added.
This patch just adds the `blendWrite` and `blendRead` callbacks to
`ModifierTypeInfo` but does not change any other code yet. In the next
steps, modifier specific code will be moved from `writefile.c` and
`readfile.c` into their corresponding `MOD_*` files.
|
|
|
|
|
|
This patch implements the list panel system D7490 for modifiers.
It also moves modifier drawing to a callback in ModifierTypeInfo
in line with the extensible architecture refactoring goal T75724.
This adds a PanelRegister callback and utilities for registering
panels and subpanels. It also adds the callbacks for expansion saving
and drag and drop reordering described in D7490.
These utilities, callbacks, and other common UI elements shared
between modifiers live in MOD_ui_common.c.
Because modifier buttons are now in panels, we can make use of
subpanels for organization. The UI layouts also use the single
column layout style consistently used elsewhere in Blender.
Additionally, the mode-setting buttons are aligned and ordered
consistently with the outliner.
However, the large number of UI changes in this patch may mean
that additional polishing is required in master.
Thanks to William Reynish (@billreynish) who did a fair amount of the
layout work and to Julian Eisel (@Severin) for consistent help.
Differential Revision: https://developer.blender.org/D7498
|
|
This resolves a performance regression in 2.8x where every edit-mode
update performed an edit-mesh to mesh conversion.
Now the conversion will be lazily initialized if/when it's required.
New BKE_mesh_wrapper_* functions abstract over mesh data access.
Currently only edit-mesh and regular meshes are supported.
In the future sub-surface meshes may be supported too.
|
|
|
|
|
|
There is no user visible difference in standard builds, as there are no
volume modifiers yet. When using WITH_NEW_OBJECT_TYPES some deform only
modifiers are now available for hair and pointcloud objects.
Differential Revision: https://developer.blender.org/D7141
|
|
This commit mainly:
* Removes some uneeded dependencies to geometry of other objects (since
we only use positions of those objects...).
* Ensures `DEG_add_modifier_to_transform_relation` is only called once
per modifier (in one case at least it could be called twice).
* For modifiers using texture mask, only add dependencies to object used
to generate texture coordinates when there is actually a texture set.
No behavior change expected from this commit...
|
|
Add a utility to deal with common 'object or posebone transform' case.
|
|
This patch adds the option to use an armature bone in place of an object for texture mask coordinates.
This affects the 3 vertex weight modifiers, the displace modifier, the warp modifier, and the wave modifier.
With minor changes from Bastien Montagne (@mont29).
Differential Revision: https://developer.blender.org/D7348
|
|
- Use 'BKE_object_defgroup' prefix for object functions.
- Rename 'defvert_verify_index' to 'defvert_ensure_index'
since this adds the group if it isn't found.
|
|
|
|
Adds the invert vgroup option to the Wave modifier.
Differential Revision: https://developer.blender.org/D6893
|
|
Note that `BKE_library.h`/`library.c` were renamed to
`BKE_lib_id.h`/`lib_id.c` to avoid having a too generic name here.
Part of T72604.
|
|
|
|
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
This was wrong and violating design to force modifiers to query
evaluated objects and IDs. It is up to the caller to make sure
the object is properly evaluatable.
Effectively, reverting changes from de491abf9962 (and possibly
other related changes).
|
|
|
|
The general idea of this change is to have a runtime data pointer
in the ModifierData, so it can be preserved through copy-on-write
updates by the dependency graph.
This is where subdivision surface modifier can store its topology
cache, so it is not getting trashed on every copy-on-write which
is happening when moving a vertex.
Similar mechanism should be used by multiresolution, dynamic paint
and some other modifiers which cache evaluated data.
This fixes T61746.
Thing to keep in mind, that there are more reports about slow
subdivision surface in the tracker, but that boils down to the
fact that those have a lot of extraordinary vertices, and hence
a lot slower to evaluated topology.
Other thing is, this speeds up oeprations which doesn't change
topology (i.e. moving vertices).
Reviewers: brecht
Reviewed By: brecht
Maniphest Tasks: T61746
Differential Revision: https://developer.blender.org/D4541
|
|
We already have different storages for cddata of verts, edges etc.,
'simply' do the same for the mask flags we use all around Blender code
to request some data, or limit some operation to some layers, etc.
Reason we need this is that some cddata types (like Normals) are
actually shared between verts/polys/loops, and we don’t want to generate
clnors everytime we request vnors!
As a side note, this also does final fix to T59338, which was the
trigger for this patch (need to request computed loop normals for
another mesh than evaluated one).
Reviewers: brecht, campbellbarton, sergey
Differential Revision: https://developer.blender.org/D4407
|
|
BLI should always comes first, before DNA, BKE etc. And
`BLI_utildefines.h` should come before any other BLI (since it's some
sort of system include really, among other things...).
Thisi should help to reduce the noise in patches when adding stuff
like uint64_t members to DNA structs... ;)
|
|
While \file doesn't need an argument, it can't have another doxy
command after it.
|
|
This is what modifiers are to use to indicate that they depend
on a transformation of the object itself.
Currently should be no functional changes, but in the future
this will allow to easily change transform operation depending
on whether there is a simulation associated with the object.
|
|
Move \ingroup onto same line to be more compact and
make it clear the file is in the group.
|
|
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
|
|
Fix T58237: Exporters: Curve Modifier not applied when "apply modifiers" are selected.
Fix T58856: Python: "to_mesh" broken in 2.8.
...And many other cases... ;)
Thing is, we need target IDs to always be evaluated ones (at least I
cannot see any case where having orig ones is desired effect here).
Depsgraph/Cow system ensures us that when modifiers are evaluated by it,
but they can also be called outside of this context, e.g. when doing
binding, or object conversion...
So we need to ensure in modifiers code that we actually are always
working with eval data for those targets.
Note that I did not touch to physics modifiers, those are a bit touchy
and rather not 'fix' something there until proven broken!
|
|
|
|
When a modifier depends on some other object's position, then it also
depends in its own position, this has to be also told to depsgraph.
Fixes several modifiers where moving target would update the modifier,
while moving modified object itself would not.
|
|
Missing dependsOnNormal callback, potential usage of NULL mesh
pointer, style...
|
|
Also fixes a few issues (like meshdeform's EM variant not using editmesh
data), and adds a few optimizations (like only generating that source
mesh when we do have a vgroup defined in parameters, for modifiers only
using it to access vgroup)...
|
|
Now that function also takes expected number of vertices, and do the
checks against generated mesh internally.
|
|
Was only used by subsurf in the past years, it is unlikely
other modifiers will every need this any time soon.
|
|
|
