| Age | Commit message (Collapse) | Author |
|---|
|
In preparation for moving mesh runtime data to C++.
|
|
This isn't likely to be helpful in the future with the move to generic
attributes
|
|
For copy-on-write, we want to share attribute arrays between meshes
where possible. Mutable pointers like `Mesh.mvert` make that difficult
by making ownership vague. They also make code more complex by adding
redundancy.
The simplest solution is just removing them and retrieving layers from
`CustomData` as needed. Similar changes have already been applied to
curves and point clouds (e9f82d3dc7ee, 410a6efb747f). Removing use of
the pointers generally makes code more obvious and more reusable.
Mesh data is now accessed with a C++ API (`Mesh::edges()` or
`Mesh::edges_for_write()`), and a C API (`BKE_mesh_edges(mesh)`).
The CoW changes this commit makes possible are described in T95845
and T95842, and started in D14139 and D14140. The change also simplifies
the ongoing mesh struct-of-array refactors from T95965.
**RNA/Python Access Performance**
Theoretically, accessing mesh elements with the RNA API may become
slower, since the layer needs to be found on every random access.
However, overhead is already high enough that this doesn't make a
noticible differenc, and performance is actually improved in some
cases. Random access can be up to 10% faster, but other situations
might be a bit slower. Generally using `foreach_get/set` are the best
way to improve performance. See the differential revision for more
discussion about Python performance.
Cycles has been updated to use raw pointers and the internal Blender
mesh types, mostly because there is no sense in having this overhead
when it's already compiled with Blender. In my tests this roughly
halves the Cycles mesh creation time (0.19s to 0.10s for a 1 million
face grid).
Differential Revision: https://developer.blender.org/D15488
|
|
* Flip the logic to first detect if we are dealing with an unmodified mesh
in editmode. And then if not, detect if we need a mapping or not.
* runtime.is_original is only valid for the bmesh wrapper. Rename it to clarify
that and only check it when the mesh is a bmesh wrapper.
* Remove MR_EXTRACT_MAPPED and instead check only for the existence of the
origindex arrays. Previously it would sometimes access those arrays without
MR_EXTRACT_MAPPED set, which according to a comment means they are invalid.
Differential Revision: https://developer.blender.org/D15676
|
|
The name was confusing to a level that it sounded like the relation
goes the opposite direction than it is intended.
|
|
All callers passed `false` for this parameter, making it more confusing
than useful. If this functionality is needed again in the future, a separate
function should be added.
Differential Revision: https://developer.blender.org/D15401
|
|
This includes:
- new modifier names
It mostly uses `N_` because the strings are actually translated elsewhere.
The goal is simply to export them to .po files.
Most of the new translations were reported in T43295#1105335.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15418
|
|
This changes is needed to give more control to modifiers' writing
callback when defined. It will allow to implement better culling of
needless data when writing e.g. modifiers from library overrides.
Ref. T97967.
Reviewed By: brecht, JacquesLucke
Differential Revision: https://developer.blender.org/D14939
|
|
The Alembic procedural was only enabled during viewport renders
originally because it did not have any caching strategy. Now that
is does, we can allow its usage in final renders.
This also removes the `dag_eval_mode` argument passing to
`ModifierTypeInfo.dependsOnTime` which was originally added to detect if
we are doing a viewport render for enabling the procedural.
Differential Revision: https://developer.blender.org/D14520
|
|
Also rename DNA struct members.
|
|
So far it was needed to declare a new RNA struct to `RNA_access.h` manually.
Since 9b298cf3dbec we generate a `RNA_prototypes.h` for RNA property
declarations. Now this also includes the RNA struct declarations, so they don't
have to be added manually anymore.
Differential Revision: https://developer.blender.org/D13862
Reviewed by: brecht, campbellbarton
|
|
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
|
|
This is similar to e032ca2e25bf2e305b66 which removed the
callback for volumes. Now that we have geometry sets, there is
no need to define a callback for every data type, and this wasn't
used. Procedural curves/hair editing will use nodes rather than new
modifier types anyway.
|
|
This patch exposes the Cycles Alembic Procedural through the MeshSequenceCache
modifier in order to use and test it from Blender.
To enable it, one has to switch the render feature set to experimental and
activate the Procedural in the modifier. An Alembic Procedural is then
created for each CacheFile from Blender set to use the Procedural, and each
Blender object having a MeshSequenceCache modifier is added to list of objects
of the right procedural.
The procedural's parameters derive from the CacheFile's properties which are
already exposed in the UI through the modifier, although more Cycles specific
options might be added in the future.
As there is currently no cache controls and since we load all the data at the
beginning of the render session, the procedural is only available during
viewport renders at the moment. When an Alembic procedural is rendered, data
from the archive are not read on the Blender side.
If a Cycles render is not active and the CacheFile is set to use the Cycles Procedural,
bounding boxes are used to display the objects in the scene as a signal that the
objects are not processed by Blender anymore. This is standard in other DCCs.
However this does not reduce the memory usage from Blender as the Alembic data
was already loaded either during an import or during a .blend file read.
This is mostly a hack to test the Cycles Alembic procedural until we have a
better Blender side mechanism for letting renderers load their own geometry,
which will be based on import and export settings on Collections (T68933).
Ref T79174, D3089
Reviewed By: brecht, sybren
Maniphest Tasks: T79174
Differential Revision: https://developer.blender.org/D10197
|
|
This commit moves the storage of `bDeformGroup` and the active index
to `Mesh`, `Lattice`, and `bGPdata` instead of `Object`. Utility
functions are added to allow easy access to the vertex groups given
an object or an ID.
As explained in T88951, the list of vertex group names is currently
stored separately per object, even though vertex group data is stored
on the geometry. This tends to complicate code and cause bugs,
especially as geometry is created procedurally and tied less closely
to an object.
The "Copy Vertex Groups to Linked" operator is removed, since they
are stored on the geometry anyway.
This patch leaves the object-level python API for vertex groups in
place. Creating a geometry-level RNA API can be a separate step;
the changes in this commit are invasive enough as it is.
Note that opening a file saved in 3.0 in an earlier version means
the vertex groups will not be available.
Differential Revision: https://developer.blender.org/D11689
|
|
|
|
This allows us to remove a callback from the modifier type info struct.
In the future the these modifiers might just be replaced by nodes
internally anyway, but in the meantime it's nice to unify the handling
of evaluated geometry a bit.
Differential Revision: https://developer.blender.org/D11080
|
|
Since the initial merge of the geometry nodes project, the modifyPointCloud
function already was already modifying a geometry set. The function wasn't
renamed back then, because then the merge would have touched many
more files.
Ref T83357.
|
|
The Vertex Weight Edit Modifier already got the Custom Curve, there was no
real reason for the proximity not to have it as well.
With some fixes by Bastien Montagne (@mont29).
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D9594
|
|
This removes `foreachObjectLink` from `ModifierTypeInfo`, `GpencilModifierTypeInfo`
and `ShaderFxTypeInfo`. There is no need to have both, `foreachObjectLink` and `foreachIDLink`.
There is not code that actually depends on `foreachObjectLink`.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D9078
|
|
As noted in T80164, there are quite a few area of Blender where the
"Reset to Default Value" operator in button context menus doesn't work.
Modifiers are one of them, because the DNA defaults system was never
set up for them.
Additionally, this should make modifier versioning easier. Whenever a
new field is added it should be automatically initialized to the
default value.
I had to make some ordering changes in the following modifiers to work
around an error with `-Wsign-conversion` in the macros:
- Solidify Modifier
- Corrective Smooth Modifier
- Screw Modifier
Some modifiers are special cases and are skipped in this commit:
- Data Transfer Modifier
- Cloth Modifier
- Fluid Modifier
- Softbody Modifier
Differential Revision: https://developer.blender.org/D8747
|
|
This reduces the number of places that have to be modified
when a new modifier is added.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D9000
|
|
With this change `outliner_draw.c` does not have to be
edited anymore when a new modifier is added.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D8998
|
|
target in certain situations
Regression from rBdeaff945d0b96.
mesh_ensure_looptri_data would overflow.
Crash would only happen if a Data Transfer modifier (transferring
UVs) follows, so exact reason for this is not yet entirely clear. Also
there are edit-mode versions of the following BVH lookup functions so it
could be avoided (since this is a expensive operation), marking as TODO.
Similar fix as
- rB0945a79ed1eafae444d3021a5912cb39801a7209
- rB56d7e39b92997768b3db8ce2dbc262f869994145
Reviewers: mont29, campbellbarton
Maniphest Tasks: T80996
Differential Revision: https://developer.blender.org/D8973
|
|
For modifier shortcuts we added a "custom_data" field to panels.
This commit uses the same system for accessing the list data that
corresponds to each panel. This way the context is only used once
and the modifier for each panel can be accessed more easily later.
This ends up being mostly a cleanup commit with a few small changes
in interface_panel.c. The large changes in the UI functions are due
to the fact that the panel custom data is now passed around as a
single pointer instead of being created again for every panel.
The list_index variable in Panel.runtime is removed as it's now
unnecessary.
Differential Revision: https://developer.blender.org/D8559
|
|
|
|
|
|
This is part of a greater blenloader decentralization effort (T76372).
For modifiers the goal is that fewer files have to be modified when
a new modifier is added.
This patch just adds the `blendWrite` and `blendRead` callbacks to
`ModifierTypeInfo` but does not change any other code yet. In the next
steps, modifier specific code will be moved from `writefile.c` and
`readfile.c` into their corresponding `MOD_*` files.
|
|
This makes the UI consitent with the weight edit modifier
|
|
This patch implements the list panel system D7490 for modifiers.
It also moves modifier drawing to a callback in ModifierTypeInfo
in line with the extensible architecture refactoring goal T75724.
This adds a PanelRegister callback and utilities for registering
panels and subpanels. It also adds the callbacks for expansion saving
and drag and drop reordering described in D7490.
These utilities, callbacks, and other common UI elements shared
between modifiers live in MOD_ui_common.c.
Because modifier buttons are now in panels, we can make use of
subpanels for organization. The UI layouts also use the single
column layout style consistently used elsewhere in Blender.
Additionally, the mode-setting buttons are aligned and ordered
consistently with the outliner.
However, the large number of UI changes in this patch may mean
that additional polishing is required in master.
Thanks to William Reynish (@billreynish) who did a fair amount of the
layout work and to Julian Eisel (@Severin) for consistent help.
Differential Revision: https://developer.blender.org/D7498
|
|
Original patch by Cody Winchester (@CodyWinch), several fixes and
cleanup by Bastien Montagne (@mont29).
Differential revision: https://developer.blender.org/D7656
|
|
|
|
|
|
There is no user visible difference in standard builds, as there are no
volume modifiers yet. When using WITH_NEW_OBJECT_TYPES some deform only
modifiers are now available for hair and pointcloud objects.
Differential Revision: https://developer.blender.org/D7141
|
|
This commit mainly:
* Removes some uneeded dependencies to geometry of other objects (since
we only use positions of those objects...).
* Ensures `DEG_add_modifier_to_transform_relation` is only called once
per modifier (in one case at least it could be called twice).
* For modifiers using texture mask, only add dependencies to object used
to generate texture coordinates when there is actually a texture set.
No behavior change expected from this commit...
|
|
Add a utility to deal with common 'object or posebone transform' case.
|
|
This patch adds the option to use an armature bone in place of an object for texture mask coordinates.
This affects the 3 vertex weight modifiers, the displace modifier, the warp modifier, and the wave modifier.
With minor changes from Bastien Montagne (@mont29).
Differential Revision: https://developer.blender.org/D7348
|
|
|
|
|
|
- Use 'BKE_object_defgroup' prefix for object functions.
- Rename 'defvert_verify_index' to 'defvert_ensure_index'
since this adds the group if it isn't found.
|
|
Adds the invert vgroup mask option to the Vertex Weight modifiers.
These 3 modifiers share the same functions so they needed to be modified at the same time. They are all setup the same with the invert vgroup option being added. I had to add a flag to the Mix modifier but the others I use the existing flags.
Differential Revision: https://developer.blender.org/D6819
|
|
Note that `BKE_library.h`/`library.c` were renamed to
`BKE_lib_id.h`/`lib_id.c` to avoid having a too generic name here.
Part of T72604.
|
|
Also correct some outdated symbol references,
add missing 'name' commands.
|
|
|
|
This also splits vertex access and allocation so it's possible
to copy coordinates into an existing array without allocating it.
|
|
TLS and Settings can be used by other types of parallel 'for loops', so
removing 'Range' from their names.
No functional changes expected here.
|
|
|
|
Also remove duplicate comments in headers.
|
|
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
