Age | Commit message (Collapse) | Author |
|
|
|
When using the mask modifier loose edges could be added to the mesh.
These edges weren't marked as loose edges and wasn't picked up by other
areas of blender.
This fix recalculates the loose edges so they have the correct flag
`ME_LOOSE_EDGE`.
Reviewed By: Sybren Stüvel
Differential Revision: https://developer.blender.org/D7766
|
|
In some cases blender could freeze. When threads are blocked (waiting for other tasks completion) the scheduler can let the thread perform a different task. If this task wants a write-lock for something that was read-locked in the stack a dead lock will happen.
For task pools every task is isolated. For range tasks the inner loop will be isolated. The implementation is limited as isolation in TBB uses functors which are tricky to add to a C API. We decided to start with a simple and adapt were we need to.
During testing we came to this setup as it was reliable (we weren't able to let it freeze or crash) and didn't had noticeable performance impact.
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D7688
|
|
Better to use more general term since in theory these forces can be used for smoke and liquid.
|
|
For now the "Simulation" modifier only exists for point cloud objects, because
we need this for the particle system. Right now, the modifier is doing nothing.
There is a new `DEG_add_simulation_relation` function that is used
by the modifier to make sure that the simulation is evaluated before
the modifier is executed.
Reviewers: brecht, sergey
Differential Revision: https://developer.blender.org/D7549
|
|
|
|
|
|
|
|
|
|
For any modifier, the expected output when the input mesh is empty, is an
empty mesh. So this error message was useless, and could spam the
console in some usecases of the modifier stack...
Reviewed By: weasel, mont29
Differential Revision: https://developer.blender.org/D7571
|
|
Differential Revision: https://developer.blender.org/D7546
|
|
|
|
Fixes T75278: Crash when modifier "Array-Fit Curve-Relative Offset"
nears zero.
|
|
There is no user visible difference in standard builds, as there are no
volume modifiers yet. When using WITH_NEW_OBJECT_TYPES some deform only
modifiers are now available for hair and pointcloud objects.
Differential Revision: https://developer.blender.org/D7141
|
|
|
|
|
|
|
|
Added the missing relation.
Maniphest Tasks: T75885
Differential Revision: https://developer.blender.org/D7473
|
|
The value of `new_edge` is `SOLIDIFY_EMPTY_TAG=2^32-1` if the edge is not generated.
The code from D7334 was missing this check.
Reviewed By: mont29
Maniphest Tasks: T75840
Differential Revision: https://developer.blender.org/D7463
|
|
|
|
While review the behaviour was changed accidentally.
Now Solidify just crashes everytime.
This is the fix for that.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D7434
|
|
After recent changes, simple solidify modifier would crash with Fill Rim
turned off and Bevel Convex emabled.
Also fixes that simple solidify would not set the bevel weight flag so the
next modifier could use the bevel weights.
Simple cleanup with do_rim is also included.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D7428
|
|
Add an option to solidify complex which will make faces which have thickness
controlled by vertex weights flat/even, and parallel to their original face.
For each face it uses the minimal weight assigned to its vertices to control
the thickness.
This will help users for example in architecture or basic CAD design by finally
making solidify work there at all if altering thickness is needed.
Differential Revision: https://developer.blender.org/D7340
Reviewed and minor cleanups by Batien Montagne (@mont29).
|
|
Adds a slider to solidify which allows the user to add bevel weight on the outside
or remove bevel weight from the inside.
Also includes a very small improvment for working with subsurface modifier where
the rim edge in complex solidify will now also have a chance to get a crease if
there is only two adjacent edges.
Differential Revision: https://developer.blender.org/D7334
Reviewing and minor cleanups: Bastien Montagne (@mont29).
|
|
of small geometry details.
* Implemented the algortihm that would merge vertices to the weighted
center between them.
* Exposed the merge threshold to the user.
The new default tolerance is 0.0001 (versionning code ensures that
previous default value remains in use to avoid any change in existing
files).
Review and minor changes/cleanups from Bastien Montagne (@mont29).
|
|
This commit mainly:
* Removes some uneeded dependencies to geometry of other objects (since
we only use positions of those objects...).
* Ensures `DEG_add_modifier_to_transform_relation` is only called once
per modifier (in one case at least it could be called twice).
* For modifiers using texture mask, only add dependencies to object used
to generate texture coordinates when there is actually a texture set.
No behavior change expected from this commit...
|
|
Add a utility to deal with common 'object or posebone transform' case.
|
|
This patch adds the option to use an armature bone in place of an object for texture mask coordinates.
This affects the 3 vertex weight modifiers, the displace modifier, the warp modifier, and the wave modifier.
With minor changes from Bastien Montagne (@mont29).
Differential Revision: https://developer.blender.org/D7348
|
|
|
|
Note this only changes cases where the variable was declared inside
the for loop. To handle it outside as well is a different challenge.
Differential Revision: https://developer.blender.org/D7320
|
|
These headers are not needed right away, but will be in the upcoming
commit.
|
|
Allows to know what level sculpting has been done after the value has
been changed in the MultiresModifierData.
No functional changes, just preparing code to have everything needed
for propagation undo.
Differential Revision: https://developer.blender.org/D7307
|
|
|
|
|
|
|
|
This adds the Voxel Mode to the current remesh modifier. It works
exactly the same way as the voxel remesh operator and uses the same
properties to control the remeshing. We can exand this with more options
in the future (fix poles, reprojection...)
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7292
|
|
The Screw Modifier had a lower limit for the steps value, which not only
was inconsistent between render and viewport steps, but also was capped
to 2 in UI and also in the code internally.
|
|
Error in recent patch D6820
|
|
|
|
Add NULL checks to other deform modifiers too.
|
|
This commit aims to add functionality to the surface deform modifier that
gives more control and allows it to work better with the modifier stack.
* Maintains compatibility with older files. The default settings keep it
so that the whole object is bound and vertex coordinates get overwritten
as the modifier currently does.
* Turns the deformations from an absolute vertex coordinate overwrite into
an additive offset from the vertex location before the modifier to the
resulting bound deformation. This gives the ability to control the
strength of the deformation and mix the deformation of the modifier
with the modifier stack that comes before it.
* Also adds in a vertex group with the invert option. This is applied after
the bind deformation is added. So the whole object is still bound to target,
and the vertex group filters afterwards what parts get affected.
I experimented with a version to only binds the geometry weighted to the
vertex group, but that would break compatibility with old files.
I may bring it in later as a separate option/mode for the surface deform.
With several fixes from @mont29.
Reviewed By: mont29
Differencial Revision: https://developer.blender.org/D6894
|
|
vertex groups.
This commit gives the solidify modifier the ability to assign the newly created shell
and rim geometries to selected vertex groups. This expands the procedural control over
the modifier stack by letting users apply modifiers to the shell geometry without affecting
the original geometry.
This will be especially helpful for NPR users that use solidify to create backface
culling lines on their characters giving them the ability to add displace noise
and other effects.
Differential Revision: https://developer.blender.org/D6903
|
|
This commit adds the option to use armature bones for the From and To targets
when using armature objects.
The changes are based on the UV Warp modifier.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D6820
|
|
Show control edges stores the control edges in the mesh which is
picked up by the draw manager. When applyng a subsurf (or multires) we
don't want that data present in the base mesh. Any rebuilding of the mesh
would overwrite the data anyway.
This patch introduces a new flag for applying modifiers
that can be checked to ignore storing display specific data in
the base mesh.
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D7163
|
|
Affects both Subdivision Surface and Multires modifiers.
|
|
|
|
This commit adds the option to invert the resulting weights of the
falloff curve.
There is a workflow used by some to convert a texture mask into
vertex weights by using a custom curve and inverting the points.
This allows the same effect with a single click, and gives the modifier
more procedural functionality.
With minor UI tweaks by @mont29.
Differential Revision: https://developer.blender.org/D6899
|
|
|
|
Give pointcaches a proper path function which e.g. also resolves
ALT+click (assign to all selected) not working for anything relating to
pointcaches.
This also cleans up the usage of the 'eModifierTypeFlag_UsesPointCache'
flag (removed from the boolean modifier, added to the softbody modifier).
Maniphest Tasks: T64573
Differential Revision: https://developer.blender.org/D7115
|
|
The removal of duplicate faces that are created during the handling of
degenerate cases was implemented already but didn't work.
This patch should fix some crashes with the solidify complex mode
related to that.
See D7221 for details.
|