| Age | Commit message (Collapse) | Author |
|---|
|
This commit adds a search menu when links are dragged above empty
space. When releasing the drag, a menu displays all compatible
sockets with the source link. The "main" sockets (usually the first)
are weighted above other sockets in the search, so they appear first
when you type the name of the node.
A few special operators for creating a reroute or a group input node
are also added to the search.
Translation is started after choosing a node so it can be placed
quickly, since users would likely adjust the position after anyway.
A small "+" is displayed next to the cursor to give a hint about this.
Further improvements are possible after this first iteration:
- Support custom node trees.
- Better drawing of items in the search menu.
- Potential tweaks to filtering of items, depending on user feedback.
Thanks to Juanfran Matheu for developing an initial patch.
Differential Revision: https://developer.blender.org/D8286
|
|
This node outputs the current scene time in seconds or in frames.
Use of this node eliminates the need to use drivers to control values
in the node tree that are driven by the scene time.
Frame is a float value to provide for subframe rendering for motion
blur.
Differential Revision: https://developer.blender.org/D13455
|
|
This node is a field input that outputs a separate index for each mesh island.
The indices are based on the order of the lowest-numbered vertex in each island.
Authoring help from @hooglyboogly
Differential Revision: https://developer.blender.org/D13504
|
|
Creates a new Edge Neighbors node which outputs a field
containing the number of faces connected to each edge.
Differential Revision: https://developer.blender.org/D13493
|
|
This adds a new Geometry to Instance node that turns every
connected input geometry into an instance. Those instances
can for example be used in the Instance on Points node.
Differential Revision: https://developer.blender.org/D13500
|
|
Creates 4 new nodes which provide topology information
for the mesh. Values are interpolated from the primary
domain in each case using basic attribute interpolation.
Vertex Neighbors
- Vertex Count
- Face Count
Face Neighbors
- Vertex Count
- Neighboring Face Count
Edge Vertices
- Vertex Index 1
- Vertex Index 2
- Position 1
- Position 2
Face Area
- Face Area
Differential Revision: https://developer.blender.org/D13343
|
|
This node calculates the dual of the input mesh. This means that faces
get replaced with vertices and vertices with faces. In principle this
only makes sense when the mesh in manifold, but there is an option to
keep the (non-manifold) boundaries of the mesh intact.
Attributes are propagated:
- Point domain goes to face domain and vice versa
- Edge domain and Face corner domain gets mapped to itself
Because of the duality, when the mesh is manifold, the attributes get
mapped to themselves when applying the node twice.
Thanks to Leul Mulugeta (@Leul) for help with the
ascii diagrams in the code comments.
Note that this does not work well with some non-manifold geometry,
like an edge connected to more than 2 faces, or a vertex connected to
only two faces, while not being in the boundary. This is because there
is no good way to define the dual at some of those points. This type
of non-manifold vertices are just removed for this reason.
Differential Revision: https://developer.blender.org/D12949
|
|
- Rename the Curve Parameter node to Spline Parameter.
- Add "Index on Spline" to the node. This output is the index of
the current point on it's parent spline rather than the entrire curve.
Differential Revision: https://developer.blender.org/D13275
|
|
The Domain Size node has a single geometry input and a selection for
the component type. Based on the component chosen, outputs containing
single values for the related domains are shown.
Mesh:
- Point Count
- Edge Count
- Face Count
- Face Corner Count
Curve:
- Point Count
- Spline Count
Point Cloud:
- Point Count
Instances:
- Instance Count
Differential Revision: https://developer.blender.org/D13365
|
|
These nodes allow accessing and changing the stable/random ID used
for motion blur with instances and stable randomness.
Since rB40c3b8836b7a, the stable ID is a built-in attribute, so to be
consistent and allow changing it in the node tree like other built-in
attributes, it has get and set nodes.
|
|
|
|
In future use cases, a volume can contain many grids that represent the
density information. In this case, it's better if the volume to mesh node
creates a mesh based on all of the grids in the volume.
This is also a benefit to share-ability, since one doesn't have to
specify the grid name in the node. Instead, in the future we can have
a way to split particular grids into separate volumes, if only one
grid should be considered.
The code changes are relatively simple:
- Move the old volume to mesh node to the legacy folder.
- Run the volume to mesh node on all instance geometry, like elsewhere.
- Make the blenkernel's volume to mesh API a bit more specific.
Differential Revision: https://developer.blender.org/D12997
|
|
This adds a new image texture node for geometry nodes. It does not
reuse the same node that is used in shading, because we want to be
able to expose the image and frame as sockets.
There is a known update issue when a movie or image sequence is
used. That will be fixed separately (also see D12957).
Currently, the image socket is just a pointer to an Image ID data block.
This can contain single images but also movies and image sequences.
In the future, the definition of an image socket can be expanded to
include images that are generated from scratch in the node tree.
For more details read the discussion in D12827.
Some of the code is a direct port from cycles and should be cleaned
up a bit in the future. For example `image_cubic_texture_lookup`.
For still images, the frame input is ignored. Otherwise, the frame
has to be in a valid range for the node to work. In the future we
may add e.g. automatic looping functionality.
Differential Revision: https://developer.blender.org/D12827
|
|
This node takes a geometry set with instances as input and outputs
points located on the origins of the top level of instances in the
geometry set (not nested instances). It also has position and radius
inputs to allow overriding the default, and a selection input to only
generate points for some instances.
The use case for this node is a method to use geometry proximity on
instance origins, but in a more generic way that is flexible and useful
in other situations.
Differential Revision: https://developer.blender.org/D12893
|
|
This commit adds an updated version of the curve to points that
supports fields. Only the position and radius are transferred
by default now, which should improve performance. The other outputs
like tangent and rotation are outputted with anonymous attributes.
I took the opportunity to change a few other small things:
- Name geometry sockets "Curve" and "Points" like other nodes.
- Remove the radius multiple of 0.1, which was confusing.
Thanks to @Johnny Matthews (guitargeek) for an initial patch.
Differential Revision: https://developer.blender.org/D12887
|
|
This patch includes an updated version of the raycast node that uses
fields instead of attributes for inputs instead of outputs. This makes
the node's UI much clearer. It should be faster too, since the
evaluation system for fields provides multi-threading.
The source position replaces the input geometry (since this node is
evaluated in the context of a geometry like the other field nodes).
Thanks to @guitargeek for an initial version of this patch.
Differential Revision: https://developer.blender.org/D12638
|
|
The Endpoint Selection node allows for the Selection of an aribitrary
number of endpoints from each spline in a curve. The start and end
inputs are evaluated on the spline domain. The result is outputted
as a boolean field on the point domain.
Differential Revision: https://developer.blender.org/D12846
|
|
Replaces the old Subdivision Surface Node.
Changes:
- Removes implicit instance realization, instead the node runs once
per unique instance.
- "Use Creases" becomes a crease field input applied to edges.
The values are clamped between zero and one.
Addresses T91763
Differential Revision: https://developer.blender.org/D12830
|
|
This commit adds an updated version of the old attribute transfer node.
It works like a function node, so it works in the context of a
geometry, with a simple data output.
The "Nearest" mode finds the nearest element of the specified domain on
the target geometry and copies the value directly from the target input.
The "Nearest Face Interpolated" finds the nearest point on anywhere on
the surface of the target mesh and linearly interpolates the value on
the target from the face's corners.
The node also has a new "Index" mode, which can pick data from specific
indices on the target geometry. The implicit default is to do a simple
copy from the target geometry, but any indices could be used. It is also
possible to use a single value for the index to to retrieve a single
value from an attribute at a certain index.
Differential Revision: https://developer.blender.org/D12785
|
|
This commit adds a fields version of the mesh to curve node, with a
field for the input selection. In order to reduce code duplication,
it adds the mesh to curve conversion to the new geometry module
and calls that implementation from both places.
More details on the geometry module can be found here: T86869
Differential Revision: https://developer.blender.org/D12579
|
|
This changes the edge split node to have a selection input, which is
more aligned with the other design changes. This loses the ability to
split edges based on an angle, but the edge angle can be added as a
field input node in the future, which will make for a much more
flexible system.
Differential Revision: https://developer.blender.org/D12829
|
|
Adds a node that can rotate each of a geometry's instances in global
(to the modifier object) or local space (of each point) by a specified
angle around a pivot point.
In the future, separating the local-global choice for the pivot and the
rotation might be useful. However, for now the node is kept simple.
Differential Revision: https://developer.blender.org/D12682
|
|
Adds a node that can scale a geometry's instances. With "Local" turned
on, the instance is scaled individually from the center point input,
while when local space is turned off, it's more like the transform
node, except it scales outward from the center point instead of only
from the origin.
Differential Revision: https://developer.blender.org/D12681
|
|
Adds a node that can translate instances in the transform space of
the modifier object, or the local space of their original transform.
One reason to have a special node for instances is that they always
have the existing transform, unlike mesh or point cloud points.
Differential Revision: https://developer.blender.org/D12679
|
|
Add Get/Set Nodes for Material Index
Rename Assign Material to Set Material
Differential Revision: https://developer.blender.org/D12837
|
|
This commit implements T91780, adding nodes to get and set builtin
attributes. Individual set nodes are used so that the values can be
exposed for direct editing, which is useful for attributes like shade
smooth and spline resolution. Individual input nodes are used to allow
reusing nodes for multiple components, and to allow grouping multiple
outputs conceptually in the same node in the future.
Input Nodes
- Radius
- Curve Tilt
- Curve Handle Positions
- Is Shade Smooth
- Spline Resolution
- Is Spline Cyclic
'Set' Nodes
- Curve Radius
- Point Radius
- Curve Tilt
- Curve Handle Positions
- Is Shade Smooth
- Spline Resolution
- Is Spline Cyclic
Using hardcoded categories is necessary to add separators to the node
menu.
Differential Revision: https://developer.blender.org/D12687
|
|
Delete Geometry:
This adds a copy of the old node in the legacy folder and updates the
node to work with fields. The invert option is removed, because it is
something that should be very easy with fields, and to be consistent
with other nodes which have a selection. There is also a dropdown to
select the domain, because the domain can't be determined from the
field input. When the domain does not belong on any of the components
an info message is displayed.
Separate Geometry:
A more general version of the old Point Separate node. The "inverted"
output is the same as using the delete geometry node.
Differential Revision: https://developer.blender.org/D12574
|
|
This node creates a boolean field selection of bezier spline points
that have a handle of the given type on the selected 'side' of the
contol point. This is evaluated on the point domain.
Differential Revision: https://developer.blender.org/D12559
|
|
This update of the Points to Volume node allows a field to populate the
radius input of the node and removes the implicit realization of
instances.
Differential Revision: https://developer.blender.org/D12531
|
|
This update of the Set Handle Type node allows for a bool field to be
used as the selection of the affected control point handles for
bezier splines. If no bezier splines are provided a info message is
shown.
Differential Revision: https://developer.blender.org/D12526
|
|
This update of the Set Spline Type node allows for a bool field to be
used as the selection of the affected splines.
Differential Revision: https://developer.blender.org/D12522
|
|
The Spline Length Input node provides a field containing the
length of the current evaluated spline to the Point and Spline
domains.
Differential Revision: https://developer.blender.org/D12706
|
|
The curve subdivide node can now take an int field to specify the
number of subdivisions to make at each curve segment.
Reviewed by: Hans Goudey
Differential Revision: https://developer.blender.org/D12534
|
|
Add a fields-aware implementation of the attribute proximity node.
The Source position is an implicit position field, but can be
connected with a position input node with alterations before use.
The target input and mode function the same as the original node.
Patch by Johnny Matthews with edits from Hans Goudey (@HooglyBoogly).
Differential Revision: https://developer.blender.org/D12635
|
|
|
|
The updated version has a selection input as a field
and does not realize instances implicitly.
Differential Revision: https://developer.blender.org/D12506
|
|
This commit adds nodes to do direct conversion between meshes and point
clouds in geometry nodes. The conversion from mesh to points is helpful
to instance once per face, or once per edge, which was previously only
possibly with ugly work-arounds. Fields can be evaluated on the mesh
to pass them to the points with the attribute capture node.
The other conversion, point cloud to mesh vertices, is a bit less
obvious, though it is still a common request from users. It's helpful
for flexibility when passing data around, better visualization in the
viewport (and in the future, cycles), and the simplicity of points.
This is a step towards T91754, where point clouds are currently
combined with meshes when outputing to the next modifier after geometry
nodes. Since we're removing the implicit behavior for realizing
instances, it feels natural to use an explicit node to convert points
to vertices too.
Differential Revision: https://developer.blender.org/D12657
|
|
This adds a new Instance on Points node that is a replacement
for the old Point Instance node. Contrary to the old node,
it does not have a mode to instance objects or collections
directly. Instead, the node has to be used with an Object/
Collection Info to achieve the same effect.
Rotation and scale of the instances can be adjusted in the node
directly or can be controlled with a field to get some variation
between instances.
The node supports placing different instances on different points.
The user has control over which instance is placed on which point
using an Instance Index input. If that functionality is used, the
Instance Geometry has to contain multiple instances that can are
instanced separately.
Differential Revision: https://developer.blender.org/D12478
|
|
This node replaces the deprecated Attribute Randomize node, populating
a vector, float, integer or boolean field with random values. Vector,
float, and integer have min/max settings, which are also field aware.
The boolean type has a probability value for controlling what portion
of the output should be true. All four types have a field seed input
which is implicitly driven by the index, otherwise, all values would
be the same "random" value.
The Random Float node is now deprecated like other nodes, since it is
redundant with this node.
Differential Revision: https://developer.blender.org/D12603
|
|
This commit adds a node that generates a text paragraph as curve
instances. The inputs on the node control the overall shape of the
paragraph, and other nodes can be used to move the individual instances
afterwards. To output more than one line, the "Special Characters" node
can be used.
The node outputs instances instead of real geometry so that it doesn't
have to duplicate work for every character afterwards. This is much
more efficient, because all of the curve evaluation and nodes like fill
curve don't have to repeat the same calculation for every instance of
the same character.
In the future, the instances component will support attributes, and the
node can output attribute fields like "Word Index" and "Line Index".
Differential Revision: https://developer.blender.org/D11522
|
|
This adds a replacement for the deprecated Point Distribute node.
Arguments for the name change can be found in T91155.
Descriptions of the sockets are available in D12536.
Thanks to Jarrett Johnson for the initial patch!
Differential Revision: https://developer.blender.org/D12536
|
|
This node can be used to fillet splines at control points to
create a circular arc.
The implementation roughly follows T89227's design.
The node works in two main modes: Bezier and Poly
* Bezier: Creates a circular arc at vertices by changing
handle lengths (applicable only for Bezier splines).
* Poly: Creates a circular arc by creating vertices (as
many as defined by the Count fields input) along
the arc (applicable for all spline types).
In both modes, the radius of the created arc is defined
by the Radius fields input.
The Limit Radius attribute can be enabled to prevent
overlapping when the defined radius exceeds the maximum
possible radius for a given point.
Reviewed By: Hans Goudey
Differential Revision: https://developer.blender.org/D12115
|
|
This commit adds a field input node that outputs the fraction of the
total length of the spline on each control point. This is useful for
anything that involves varying a value depending on how far along
the spline it is.
It also works when evaluated on the spline domain, where it outputs
the fraction of the total length of all of the splines at the start.
The operation isn't as well defined for NURB splines for the reasons
noted in the code comment. That can be said explicitly in the docs.
Differential Revision: https://developer.blender.org/D12548
|
|
This patch adds four new nodes to a new "Text" category:
- String Length: Outputs length of a string
- String Substring: Outputs part of a string
- Value to String: Converts a value to a string
- String Join: Concatenates multiple strings with a delimiter
The initial use case of these nodes is the upcoming string to curve
node. However, they could also be used to calculate dynamic attribute
names, or with string attributes in the future.
Differential Revision: https://developer.blender.org/D12532
|
|
This node outputs the direction vector, or tangent of a curve at every
control point. For poly splines this is simply the evaluated tangents,
so it all works very simply. For Bezier splines it uses the tangent at
the evaluated point corresponding to each control point, and NURBS
are interpereted as poly splines built from their control points.
Internally the node is called "Input Tangent" to simplify using it for
mesh tangents as well in the future like the "Normal" node.
Differential Revision: https://developer.blender.org/D12581
|
|
This node allows sampling positions, tangents, and normals at any
arbitrary point along a curve. The curve can include multiple splines,
all are taken into account. The node does not yet support transferring
generic attributes like radius, because some more general tooling will
make that much more feasible and useful in different scenarios.
This is a field node, so it is evaluated in the context of a data-flow
node like "Set Position". One nice thing about that is it can easily
be used to move an entire geometry like the follow path constraint.
The point along the curve is chosen either with a factor of the total
length of the curve, or a length into the curve, the same choice used
in the curve trim node.
Differential Revision: https://developer.blender.org/D12565
|
|
This nodes evaluates a field on a geometry and outputs various
statistics about the entire data set, like min, max, or even
the standard deviation. It works for float and vector types currently,
though more types could be supported in the future.
- All statistics are calculated element-wise for vectors.
- "Product" was not added since the result could very easily overflow.
- The "Size" output was not added since it isn't specific to an
attribute and would fit better in another node.
The implementation shares work as much as possible when multiple
statistics are needed.
This node has been in development since the beginning of this year,
with additions from Johnny Matthews and Hans Goudey.
Differential Revision: https://developer.blender.org/D10202
|
|
This node has a simple geometry input and output.
If the input geometry contains instances, they will be realized
into actual geometry. When there are many instances, this can
be very slow and memory intensive. Generally, instances should
only be made real when necessary, e.g. when every instance
should be deformed independently.
Differential Revision: https://developer.blender.org/D12556
|
|
This commit moves the old material nodes to a "legacy" folder and adds
versions of the nodes that work with fields.
The "Select by Material" node is a field node now, so it doesn't have
a geometry output. This is an improvement because there are fewer links
to connect, and it's more easily usable in different situations.
It's also called "Material Selection", since it's more of an input
than an action now.
It's sometimes necessary to use the attribute capture node to get a
more predictable interpolation to mesh faces. This is because the
selection field input is always evaluated on the face domain, so
attribute inputs are interpolated before they are booleans, so they
cannot use the new interpolations from rB5841f8656d9580d7b9.
Differential Revision: https://developer.blender.org/D12456
|
|
This implements the initial core framework for fields and anonymous
attributes (also see T91274).
The new functionality is hidden behind the "Geometry Nodes Fields"
feature flag. When enabled in the user preferences, the following
new nodes become available: `Position`, `Index`, `Normal`,
`Set Position` and `Attribute Capture`.
Socket inspection has not been updated to work with fields yet.
Besides these changes at the user level, this patch contains the
ground work for:
* building and evaluating fields at run-time (`FN_fields.hh`) and
* creating and accessing anonymous attributes on geometry
(`BKE_anonymous_attribute.h`).
For evaluating fields we use a new so called multi-function procedure
(`FN_multi_function_procedure.hh`). It allows composing multi-functions
in arbitrary ways and supports efficient evaluation as is required by
fields. See `FN_multi_function_procedure.hh` for more details on how
this evaluation mechanism can be used.
A new `AttributeIDRef` has been added which allows handling named
and anonymous attributes in the same way in many places.
Hans and I worked on this patch together.
Differential Revision: https://developer.blender.org/D12414
|
