| Age | Commit message (Collapse) | Author |
|---|
|
Rename the node to "Offset Point in Curve"
Since this was committed, more mesh and curve topology nodes have been
committed with a different naming scheme (482d431bb6735e82069). Change
the name of this node to match "Offset Corner in Face". Because the
node was only added recently, it's a full rename, including the ID,
so forward compatibility is broken.
|
|
This node allows for curves to have their evaluated normal mode changed
between MINIMUM_TWIST and Z_UP. A selection input allows for choosing
which spline in the curves object will be affected.
Differential Revision: D16118
|
|
This node allows sampling an attribute on a mesh surface based
on a UV coordinate. Internally, this has to do a "reverse uv lookup",
i.e. the node has to find the polygon that corresponds to the uv
coordinate. Therefore, the uv map of the mesh should not have
overlapping faces.
Differential Revision: https://developer.blender.org/D15440
|
|
|
|
This patch contains an initial set of nodes to access basic
mesh topology information, as explored in T100020.
The nodes allow six direct topology mappings for meshes:
- **Corner -> Face** The face a corner is in, the index in the face
- **Vertex -> Edge** Choose an edge attached to the vertex
- **Vertex -> Corner** Choose a corner attached to the vertex
- **Corner -> Edge** The next and previous edge at each face corner
- **Corner -> Vertex** The vertex associated with a corner
- **Corner -> Corner** Offset a corner index within a face
And two new topology mappings for curves:
- **Curve -> Points** Choose a point within a curve
- **Point -> Curve** The curve a point is in, the index in the curve
The idea is that some of the 16 possible mesh mappings are more
important, and that this is a useful set of nodes to start exploring
this area. For mappings with an arbitrary number of connections, we
must sort them and use an index to choose a single element, because
geometry nodes does not support list fields. Note that the sort
index has repeating behavior as it goes over the "Total" number of
connections, and negative sort indices choose from the end.
Currently which of the "start" elements is used is determined by the
field context, so the "Field at Index" and "Interpolate Domain" nodes
will be quite important. Also, currently the "Sort Index" inputs are
clamped to the number of connections.
One important feature that isn't implemented here is using the winding
order for the output elements. This can be a separate mode for some
of these nodes. It will be optional because of the performance impact.
There are several todos for separate commits after this:
- Rename "Control Point Neighbors" to be consistent with this naming
- Version away the "Vertex Neighbors" node which is fully redundant now
- Implement a special case for when no weights are used for performance
- De-duplicating some of the sorting logic between the nodes
- Improve performance and memory use of topology mappings
- Look into caching some of the mappings on meshes
Differential Revision: https://developer.blender.org/D16029
|
|
This node allows access to the indices of neighboring control points
within a curve via an offset. This includes taking into consideration
curves that are cyclic.
Differential Revision: D13373
|
|
This patch replaces the existing transfer attribute node with three
nodes, "Sample Nearest Surface", "Sample Index", and "Sample Nearest".
This follows the design in T100010, allowing for new nodes like UV
sampling in the future. There is versioning so the new nodes replace
the old ones and are relinked as necessary.
The "Sample Nearest Surface" node is meant for the more complex
sampling algorithms that only work on meshes and interpolate
values inside of faces.
The new "Sample Index" just retrieves attributes from a geometry at
specific indices. It doesn't have implicit behavior like the old
transfer mode, which should make it more predictable. In order to not
change the behavior from existing files, the node has a has a "Clamp",
which is off by default for consistency with the "Field at Index" node.
The "Sample Nearest" node returns the index of the nearest element
on a geometry. It can be combined with the "Sample Index" node for
the same functionality as the old transfer node. This node can support
curves in the future.
Backwards compatibility is handled by versioning, but old versions can
not understand these nodes. The warning from 680fa8a523e0 should make
this explicit in 3.3 and earlier.
Differential Revision: https://developer.blender.org/D15909
|
|
From the nodes' description: "Retrieve the object that contains
the geometry nodes modifier currently being executed". This was
discussed in the most recent geometry nodes module meeting.
Because the node allows you to retrieve the position of the modifier
object, it has to add a depsgraph relation to object transform.
Expect that modifiers will be reevaluated when moving the object.
In the future, better static analysis of node trees could make this
check smarter.
Differential Revision: https://developer.blender.org/D16037
|
|
This commit adds a node to distribute points inside of volume grids.
The "Random" mode usese OpenVDB's "point scatter" implementation, and
there is also a "Grid" mode for uniform distributions. Both methods
operate on all of the float grids in the volume, using every voxel with
a value higher than the threshold. The random method is not stable as
the input volume deforms.
Based on a patch by Angus Stanton (@abstanton), which was based on a
patch by Kenzie (@kenziemac130).
Differential Revision: https://developer.blender.org/D15375
|
|
And remove Python flags from nodes, no longer needed.
|
|
With the recent addition of the UV unwrapping node, there is a need to
be able to create seams easily. This node does that by outputting a
selection of the boundaries between different input face sets. In the
context of UV mapping, one inputs the "patches" you want, and the node
gives you the seams needed to make those patches.
Differential Revision: https://developer.blender.org/D15423
|
|
|
|
This name doesn't require understanding of fields, and
is phrased as an action which is consistent with other nodes.
Discussed in the latest geometry nodes sub-module meeting.
|
|
This adds three new nodes:
* `Shortest Edge Paths`: Actually finds the shortest paths.
* `Edge Paths to Curves`: Converts the paths to separate curves.
This may generate a quadratic amount of data, making it slow
for large meshes.
* `Edge Paths to Selection`: Generates an edge selection that
contains all edges that are part of a path. This can be used
with the Separate Geometry node to only keep the edges that
are part of a path. For large meshes, this approach can be
much faster than the `Edge Paths to Curves` node, because
less data is created.
Differential Revision: https://developer.blender.org/D15274
|
|
Curves that are attached to a surface can now follow the surface when
it is modified using shape keys or modifiers (but not when the original
surface is deformed in edit or sculpt mode).
The surface is allowed to be changed in any way that keeps uv maps
intact. So deformation is allowed, but also some topology changes like
subdivision.
The following features are added:
* A new `Deform Curves on Surface` node, which deforms curves with
attachment information based on the surface object and uv map set
in the properties panel.
* A new `Add Rest Position` checkbox in the shape keys panel. When checked,
a new `rest_position` vector attribute is added to the mesh before shape
keys and modifiers are applied. This is necessary to support proper
deformation of the curves, but can also be used for other purposes.
* The `Add > Curve > Empty Hair` operator now sets up a simple geometry
nodes setup that deforms the hair. It also makes sure that the rest
position attribute is added to the surface.
* A new `Object (Attach Curves to Surface)` operator in the `Set Parent To`
(ctrl+P) menu, which attaches existing curves to the surface and sets the
surface object as parent.
Limitations:
* Sculpting the procedurally deformed curves will be implemented separately.
* The `Deform Curves on Surface` node is not generic and can only be used
for one specific purpose currently. We plan to generalize this more in the
future by adding support by exposing more inputs and/or by turning it into
a node group.
Differential Revision: https://developer.blender.org/D14864
|
|
This reverts commit 9bb2afb55e50f9353cfc76cf2d8df7521b0b5feb.
Oops, did not intend to commit this to master.
|
|
This is the start of a geometry node to do edge, vertex, and face
bevels.
It doesn't yet do anything but analyze the "Vertex cap" around
selected vertices for vertex bevel.
|
|
This commit adds new Unwrap and Pack Islands nodes, with equivalent
functionality to the existing Unwrap and Pack Islands operators. The
Unwrap node uses generic boolean attributes to determine seams instead
of looking at the seam flags in the mesh geometry.
Unlike the Unwrap operator, the Unwrap node doesn't perform aspect
ratio correction, because this is trivial for the user to implement
with a Vector Math node if it is desired.
The Unwrap node implicitly performs a Pack Islands operation upon
completion, because the results may not be generally useful otherwise.
This matches the behaviour of the Unwrap operator.
The nodes use the existing Vector socket type, and do not introduce a
new 2D Vector type (see T92765).
Differential Revision: https://developer.blender.org/D14389
|
|
This adds a Mesh To Volume Node T86838 based on the existing modifier.
The mesh to volume conversion is implemented in the geometry module,
and shared between the node and the modifier.
Currently the node outputs a grid with the name "density". This may
change in the future depending on the decisions made in T91668.
The original patch was by Kris (@Metricity), further implementation
by Geramy Loveless (@GeramyLoveless), then finished by Erik Abrahamsson
(@erik85).
Differential Revision: https://developer.blender.org/D10895
|
|
As described in T98943, this commit adds a node that can
evaluate a field on a separate domain in a larger field context.
This is potentially useful in many cases, to avoid relying on
a separate capture attribute node, which can make it easier
to build reusable fields that don't need geometry inputs.
Internally, the node just evaluates the input field in the larger
field context and then uses the generic domain interpolation,
so the code is simple. One future optimization might be using
the input selection to only evaluate part of the input field, but
then the selection has to be interpolated as well, and that might
not always be worth it.
Differential Revision: https://developer.blender.org/D15289
|
|
This node takes a point count,a vector field, and float field and creates
a pointcloud with n points at the positions indicated in the vector
field with the radii specified in the float field.The node is placed in
the "Point" menu.
Differential Revision: https://developer.blender.org/D13920
Maniphest Task: https://developer.blender.org/T93044
|
|
This commit adds a Volume Cube primitive node. It outputs a volume that
contains a single "density" float grid. The density per voxel can be
controlled with a field that depends on the voxel position (using the
existing Position node). Other field inputs are not supported.
The density field is evaluated on every voxel.
Possible future improvements are listed in D15198.
Differential Revision: https://developer.blender.org/D15198
|
|
A field input node for the scale of each top-level instance transform.
The scale can be set with the "Scale Instances" node, but previously
could not be retrieved.
Differential Revision: https://developer.blender.org/D15132
|
|
A field input node for the rotation of each top-level instance transform.
The rotation can be set with the "Rotate Instances" node, but previously
could not be retrieved.
Differential Revision: https://developer.blender.org/D15131
|
|
|
|
Somehow exposed after 943b919fe807b5355, linking could fail because
bf_nodes was not properly configured as a dependency of bf_nodes_shader.
Also add the dependency to the geometry nodes module.
|
|
This commit removes the implementations of legacy nodes,
their type definitions, and related code that becomes unused.
Now that we have two releases that included the legacy nodes,
there is not much reason to include them still. Removing the
code means refactoring will be easier, and old code doesn't
have to be tested and maintained.
After this commit, the legacy nodes will be undefined in the UI,
so 3.0 or 3.1 should be used to convert files to the fields system.
The net change is 12184 lines removed!
The tooltip for legacy nodes mentioned that we would remove
them before 4.0, which was purposefully a bit vague to allow
us this flexibility. In a poll in a devtalk post showed that the
majority of people were okay with removing the nodes.
https://devtalk.blender.org/t/geometry-nodes-backward-compatibility-poll/20199
Differential Revision: https://developer.blender.org/D14353
|
|
This commit adds three nodes:
- `Remove Attribute`: Removes an attribute with the given name
- `Named Attribute`: A field input node
- `Store Named Attribute`: Puts results of a field in a named attribute
They are added behind a new experimental feature flag, because further
development of attribute search and name dependency visualization will
happen as separate steps.
Ref T91742
Differential Revision: https://developer.blender.org/D12685
|
|
So far it was needed to declare a new RNA struct to `RNA_access.h` manually.
Since 9b298cf3dbec we generate a `RNA_prototypes.h` for RNA property
declarations. Now this also includes the RNA struct declarations, so they don't
have to be added manually anymore.
Differential Revision: https://developer.blender.org/D13862
Reviewed by: brecht, campbellbarton
|
|
I've had trouble finding this node a few times now,
it's simpler if the file name matches the name in the UI.
|
|
This adds a node with a boolean field output which returns true if all of the
points of the evaluated face are on the same plane. A float field input allows
for the threshold of the face/point comparison to be adjusted on a per face basis.
One clear use case is to only triangulate faces that are not planar.
Differential Revision: https://developer.blender.org/D13906
|
|
This adds a node which copies part of a geometry a dynamic number
of times.
Different parts of the geometry can be copied differing amounts
of times, controlled by the amount input field. Geometry can also
be ignored by use of the selection input.
The output geometry contains only the copies created by the node.
if the amount input is set to zero, the output geometry will be
empty. The duplicate index output is an integer index with the copy
number of each duplicate.
Differential Revision: https://developer.blender.org/D13701
|
|
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
|
|
Previously, macros were ifdefed using the cmake option `WITH_INTERNATIONAL`
However, the is unnecessary as withen the functions themselves have checks for building without internationalization.
This also means that many `add_definitions(-DWITH_INTERNATIONAL)` are also unnecessary.
Reviewed By: mont29, LazyDodo
Differential Revision: https://developer.blender.org/D13929
|
|
This implements a merge by distance operation for point clouds.
Besides the geometry input, there are two others-- a selection
input to limit the operation to certain points, and the merge
distance. While it would be a reasonable feature, the distance
does not support a field currently, since that would make
the algorithm significantly more complex.
All attributes are merged to the merged points, with the values
mixed together. This same generic method is used for all attributes,
including `position`. The `id` attribute uses the value from the
first merged index for each point.
For the implementation, most of the effort goes into creating a
merge map to speed up attribute mixing. Some parts are inherently
single-threaded, like finding the final indices accounting for the
merged points. By far most of the time is spend balancing the
KD tree.
Mesh support will be added in the next commit.
Differential Revision: https://developer.blender.org/D13649
|
|
This patch introduces an extrude node with three modes. The vertex mode
is quite simple, and just attaches new edges to the selected vertices.
The edge mode attaches new faces to the selected edges. The faces mode
extrudes patches of selected faces, or each selected face individually,
depending on the "Individual" boolean input.
The default value of the "Offset" input is the mesh's normals, which
can be scaled with the "Offset Scale" input.
**Attribute Propagation**
Attributes are transferred to the new elements with specific rules.
Attributes will never change domains for interpolations. Generally
boolean attributes are propagated with "or", meaning any connected
"true" value that is mixed in for other types will cause the new value
to be "true" as well. The `"id"` attribute does not have any special
handling currently.
Vertex Mode
- Vertex: Copied values of selected vertices.
- Edge: Averaged values of selected edges. For booleans, edges are
selected if any connected edges are selected.
Edge Mode
- Vertex: Copied values of extruded vertices.
- Connecting edges (vertical): Average values of connected extruded
edges. For booleans, the edges are selected if any connected
extruded edges are selected.
- Duplicate edges: Copied values of selected edges.
- Face: Averaged values of all faces connected to the selected edge.
For booleans, faces are selected if any connected original faces
are selected.
- Corner: Averaged values of corresponding corners in all faces
connected to selected edges. For booleans, corners are selected
if one of those corners are selected.
Face Mode
- Vertex: Copied values of extruded vertices.
- Connecting edges (vertical): Average values of connected selected
edges, not including the edges "on top" of extruded regions.
For booleans, edges are selected when any connected extruded edges
were selected.
- Duplicate edges: Copied values of extruded edges.
- Face: Copied values of the corresponding selected faces.
- Corner: Copied values of corresponding corners in selected faces.
Individual Face Mode
- Vertex: Copied values of extruded vertices.
- Connecting edges (vertical): Average values of the two neighboring
edges on each extruded face. For booleans, edges are selected
when at least one neighbor on the extruded face was selected.
- Duplicate edges: Copied values of extruded edges.
- Face: Copied values of the corresponding selected faces.
- Corner: Copied values of corresponding corners in selected faces.
**Differences from edit mode**
In face mode (non-individual), the behavior can be different than the
extrude tools in edit mode-- this node doesn't handle keeping the back-
faces around in the cases that the edit mode tools do. The planned
"Solidify" node will handle that use case instead. Keeping this node
simpler and faster is preferable at this point, especially because that
sort of "smart" behavior is not that predictable and makes less sense
in a procedural context.
In the future, an "Even Offset" option could be added to this node
hopefully fairly simply. For now it is left out in order to keep
the patch simpler.
**Implementation**
For the implementation, the `Mesh` data structure is used directly
rather than converting to `BMesh` and back like D12224. This optimizes
for large extrusion operations rather than many sequential extrusions.
While this is potentially more verbose, it has some important benefits:
First, there is no conversion to and from `BMesh`. The code only has
to fill arrays and it can do that all at once, making each component of
the algorithm much easier to optimize. It also makes the attribute
interpolation more explicit, and likely faster. Only limited topology
maps must be created in most cases.
While there are some necessary loops and allocations with the size of
the entire mesh, I tried to keep everything I could on the order of the
size of the selection rather than the size of the mesh. In that respect,
the individual faces mode is the best, since there is no topology
information necessary, and the amount of work just depends on the size
of the selection.
Modifying an existing mesh instead of generating a new one was a bit
of a toss-up, but has a few potential benefits:
- Avoids manually copying over attribute data for original elements.
- Avoids some overhead of creating a new mesh.
- Can potentially take advantage of future ammortized mesh growth.
This could be changed easily if it turns out to be the wrong choice.
Differential Revision: https://developer.blender.org/D13709
|
|
This node can scale individual edges and faces. When multiple selected
faces/edges share the same vertices, they are scaled together.
The center and scaling factor is averaged in this case.
For some examples see D13757.
Differential Revision: https://developer.blender.org/D13757
|
|
Currently there is no way to flip normals in geometry nodes. This node
makes that possible by flipping the winding order of selected faces.
The node is purposely not called "Flip Normals", because normals are
derived data, changing them is only a side effect. The real change is
that the vertex and edge indices in the face corners of every selected
polygon are reversed, and face corner attribute data is reversed.
While there are existing utilities to flip a polygon and its custom
data, this node aims to process an attribute's data together instead
of processing all attributes separately for each index.
Differential Revision: https://developer.blender.org/D13809
|
|
This adds a new curve primitive to generate arcs.
Radius mode (default): Generates a fixed radius arc on XY plane
with controls for Angle, Sweep and Invert.
Points mode: Generates a three point curve arc from Start to End
via Middle with an Angle Offset and option to invert the arc.
There are also outputs for arc center, radius and normal direction
relative to the Z-axis.
This patch is based on previous patches
D11713 and D13100 from @guitargeek. Thank you.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D13640
|
|
This node allows accessing data of other elements in the context geometry.
It is similar to the Transfer Attribute node in Index mode. The main difference
is that this node does not require a geometry input, because the context
is used.
The node can e.g. be used to generalize what the Edge Vertices node is doing.
Instead of only being able to get the position of the vertices of an edge,
any field/attribute can be accessed on the vertices.
Differential Revision: https://developer.blender.org/D13825
|
|
|
|
|
|
Calculates the angle in radians between two faces that meet at an edge.
0 to PI in either direction with flat being 0 and folded over on itself PI.
If there are not 2 faces on the edge, the angle will be 0.
For valid edges, the angle is the same as the 'edge angle' overlay.
For the Face and Point domain, the node uses simple interpolation to calculate a value.
Differential Revision: https://developer.blender.org/D13366
|
|
This function node creates a running total of a given Vector, Float, or
Int field.
Inputs:
- Value: The field to be accumulated
- Group Index: The values of this input are used to aggregate the input
into separate 'bins', creating multiple accumulations.
Outputs:
- Leading and Trailing: Returns the running totals starting
at either the first value of each accumulations or 0 respectively.
- Total: Returns the total accumulation at all positions of the field.
There's currently plenty of duplicate work happening when multiple outputs
are used that could be optimized by a future refactor to field inputs.
Differential Revision: https://developer.blender.org/D12743
|
|
|
|
This node outputs the current scene time in seconds or in frames.
Use of this node eliminates the need to use drivers to control values
in the node tree that are driven by the scene time.
Frame is a float value to provide for subframe rendering for motion
blur.
Differential Revision: https://developer.blender.org/D13455
|
|
This node is a field input that outputs a separate index for each mesh island.
The indices are based on the order of the lowest-numbered vertex in each island.
Authoring help from @hooglyboogly
Differential Revision: https://developer.blender.org/D13504
|
|
Creates a new Edge Neighbors node which outputs a field
containing the number of faces connected to each edge.
Differential Revision: https://developer.blender.org/D13493
|
|
This adds a new Geometry to Instance node that turns every
connected input geometry into an instance. Those instances
can for example be used in the Instance on Points node.
Differential Revision: https://developer.blender.org/D13500
|
|
Creates 4 new nodes which provide topology information
for the mesh. Values are interpolated from the primary
domain in each case using basic attribute interpolation.
Vertex Neighbors
- Vertex Count
- Face Count
Face Neighbors
- Vertex Count
- Neighboring Face Count
Edge Vertices
- Vertex Index 1
- Vertex Index 2
- Position 1
- Position 2
Face Area
- Face Area
Differential Revision: https://developer.blender.org/D13343
|
