Age | Commit message (Collapse) | Author |
|
Move texture nodes to C++ and use new socket declaration
Brick, Checker, Image, Magic and Wave
Differential Revision: https://developer.blender.org/D12778
|
|
Note this only changes cases where the variable was declared inside
the for loop. To handle it outside as well is a different challenge.
Differential Revision: https://developer.blender.org/D7320
|
|
Currently the link limit of sockets is stored in bNodeSocket->limit.
This allows for a lot of flexibility, but is also very redundant.
In every case I've had to deal with so far, it would have "more correct"
to set the link limit per socket type and not per socket. I did not enforce
this constraint yet, because the link limit is exposed in the Python API,
which I did not want to break here.
In the future it might even make sense to only support only three kinds of link limits:
a) no links, b) at most one link, c) an arbitrary number links links. The other link
limits usually don't work well with tools (e.g. which link should be removed when a new
one is connected?) and is not used in practice. However, that is for another day.
Eventually, I would like to get rid of bNodeSocket->limit completely and replace it
either with fixed link limits or a callback in bNodeSocketType.
This patch consists of three parts:
**1. Support defining link limit in socket type**
This introduces a new `nodeSocketLinkLimit` function that serves as an indirection to
hide where the link limit of a socket is defined.
**2. Define link limits for builtin sockets on socket type**
Data sockets: one input, many outputs
Virtual sockets: one input, one output
Undefined sockets: many inputs, many outputs (to avoid that links are removed when the type of the socket is not known)
**3. Remove `bNodeSocketTemplate->limit`**
This wasn't used anymore after the second commit. Removing it simplifies socket definitions
in hundreds of places and removes a lot of redundancy.
Differential Revision: https://developer.blender.org/D7038
Reviewers: brecht
|
|
We basically duplicate the height map branch plugged into the bump node,
and tag each node in each branch as dx/dy/ref using `branch_tag`.
Then we add a one pixel offset on the texture coordinates if the node is
tagged as dx or dy.
The dx/dy branches are plugged into (new) hidden sockets on the bump node.
This match cycles bump better but have a performance impact. Also, complex
nodetrees can now become instruction limited and not compile anymore.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5531
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
Needed for clan-format not to wrap onto one line.
|
|
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
|
|
|
|
* Remove GPU_link_changed which is unused.
* Remove all GPU link function that are not used anymore.
* GPU_uniform_buffer is now GPU_uniform.
* GPU_texture_ramp is now GPU_color_band.
* GPU_uniform is now GPU_constant.
|
|
No longer needed after Blender Internal removal and Eevee replacing the
Cycles GLSL shading nodes.
|
|
|
|
Remove from blender/nodes, collada, blenfont & render.
|
|
|
|
Strip unindented comment blocks - mainly headers to avoid conflicts.
|
|
For users that means you can tweak shaders in the nodetree and things
are way faster. This is a huge improvement, particularly in
systems that have no shader cache.
From the code perspective it means we are no longer re-compiling the
shader every time a value is tweaked in the UI. We are using uniforms
for those values.
It would be slow to add that many uniforms for all the shaders. So
instead we are using UBO (Uniform Buffer Objects).
This fixes the main issue of T51467. However GWN_shaderinterface_create() still
needs to be improvedi. When opening a .blend all shaders are compiled once, so
optimizing it will bring a measurable impact.
========================================================================
NOTE: This breaks update of Cycles material upon nodetree nodes
tweaking. It will be fixed separately by depsgraph, once tackling T51925
(Animated Eevee values slowdown).
The idea is to make Depsgraph update more granular. The XXX TODO in
rna_nodetree.c will be tackled at that time as well.
========================================================================
Reviewers: sergey, brecht, fclem
Differential Revision: https://developer.blender.org/D2739
|
|
|
|
This option allows to create a smoother transition between Bricks and Mortar - 0 applies no smoothing, and 1 smooths across the whole mortar width.
Mainly useful for displacement textures.
The new default value for the smoothing option is 0.1 to give some smoothing that helps with antialiasing, but existing nodes are loaded with smoothing 0 to preserve compatibility.
Reviewers: sergey, dingto, juicyfruit, brecht
Reviewed By: brecht
Subscribers: Blendify, nutel
Differential Revision: https://developer.blender.org/D2230
|
|
|
|
|
|
Implements a more flexible internal connect function for standard nodes
(compositor, shader, texture). Allow feasible datatype connections by
priority.
The priorities for common datatypes in compositor, shader and texture
nodes are encoded in a simple function. Certain impossible connections
(e.g. color -> cycles shader) are excluded by giving them -1 priority.
Priority overrides link status: If a higher priority input can be found,
this will be used regardless of link status. Link status only comes into
play for inputs with same priority.
Reviewers: brecht
CC: sebastian_k
Differential Revision: https://developer.blender.org/D356
|
|
consistent.
Reviewed by Brecht van Lommel, Thomas Dinges and Jonathan Williamson
|
|
* Keep the Mapping node default type as Point for now, instead of Texture. The
latter is a better default, but this is breaking API compatibility and it's
too close to release to expect addons to be fixed in time.
* Vector Transform and Mapping nodes had properties with name "type" to set the
type of vector, but this conflicts with the node type property, so renamed to
vector_type now.
|
|
scale and rotation in mapping node, there would be shearing, and the only way
to avoid that was to add 2 mapping nodes. This is because to transform the
texture, the inverse transform needs to be done on the texture coordinate
Now the mapping node has Texture/Point/Vector/Normal types to transform the
vector for a particular purpose. Point is the existing behavior, Texture is
the new default that behaves more like you might expect.
|
|
are no longer required and have no effect. Whether or not a node supports additional options buttons is now determined by the
existence of a draw callback (uifunc and/or uifuncbut).
|
|
* Use unified node sizes, as already was done with compositor nodes. Only Mapping node uses a custom size. This way we don't have too small nodes on creation anymore.
* Don't show Script Category for Blender Internal nodes.
|
|
PyNodes opens up the node system in Blender to scripters and adds a number of UI-level improvements.
=== Dynamic node type registration ===
Node types can now be added at runtime, using the RNA registration mechanism from python. This enables addons such as render engines to create a complete user interface with nodes.
Examples of how such nodes can be defined can be found in my personal wiki docs atm [1] and as a script template in release/scripts/templates_py/custom_nodes.py [2].
=== Node group improvements ===
Each node editor now has a tree history of edited node groups, which allows opening and editing nested node groups. The node editor also supports pinning now, so that different spaces can be used to edit different node groups simultaneously. For more ramblings and rationale see (really old) blog post on code.blender.org [3].
The interface of node groups has been overhauled. Sockets of a node group are no longer displayed in columns on either side, but instead special input/output nodes are used to mirror group sockets inside a node tree. This solves the problem of long node lines in groups and allows more adaptable node layout. Internal sockets can be exposed from a group by either connecting to the extension sockets in input/output nodes (shown as empty circle) or by adding sockets from the node property bar in the "Interface" panel. Further details such as the socket name can also be changed there.
[1] http://wiki.blender.org/index.php/User:Phonybone/Python_Nodes
[2] http://projects.blender.org/scm/viewvc.php/trunk/blender/release/scripts/templates_py/custom_nodes.py?view=markup&root=bf-blender
[3] http://code.blender.org/index.php/2012/01/improving-node-group-interface-editing/
|
|
|
|
Regular rendering now works tiled, and supports save buffers to save memory
during render and cache render results.
Brick texture node by Thomas.
http://wiki.blender.org/index.php/Doc:2.6/Manual/Render/Cycles/Nodes/Textures#Brick_Texture
Image texture Blended Box Mapping.
http://wiki.blender.org/index.php/Doc:2.6/Manual/Render/Cycles/Nodes/Textures#Image_Texture
http://mango.blender.org/production/blended_box/
Various bug fixes by Sergey and Campbell.
* Fix for reading freed memory in some node setups.
* Fix incorrect memory read when synchronizing mesh motion.
* Fix crash appearing when direct light usage is different on different layers.
* Fix for vector pass gives wrong result in some circumstances.
* Fix for wrong resolution used for rendering Render Layer node.
* Option to cancel rendering when doing initial synchronization.
* No more texture limit when using CPU render.
* Many fixes for new tiled rendering.
|